Norton antivirus says my licence have expired when switch my computer on for the first time.

I just bought new touchsmart 520-1002 ru (LN649EA). It had norton antivirus preinstalled when i started it for the first time. After few hours of working antivirus informed me that the licence have expired. But before it was like 60 days. What to do? I'm affraid of sirfing the web without antivirus protection. So i'm using iphone. May be i should return it and buy second hand mac?

Hello Karuser:
        Welcome to HP's forum  and your new computer. Nothing to worry about. That was a trial verson. What ever time limit they gave it has expired. I think you miss read it It flashes a reminder all the time. You can still use your computer. Until you purchase or install an anti virus software. The only thing Norton will not do is up date it's self but it will still scan your computer when you open it up and click scan. Try to get anti  virus software. Titanium Maximum 2012, McAfee, and Norton are the top choices to choose from. Try to stay a way from the real cheep ones like Kerpsky that will not protect your computer. My freind installed Kerpsky asked to fix his lap top. Well I did fix it first thing I did was get it on line and run Trend House Call it found over 250 different virus. Some of the worst ones I had to manually removed. Trend House call is a free scan. Trend.com are the one who make Titanium Maximum Security 2012.
         You just bought this computer Mac's are great computers but you are very limited to what you can do on them. This one will last you for a very long time ounce we get the bugs out it. My Touchsmart 600-1050 is going strong going into it's third year now. Just had it's frist full recovery done now my computer runs faster and much better then when I first bought it. Yes I had some minor issues fixed on it at first like anything you buy today is not perfect HP covored it all during the one year warranty. My recovery was performed because I picked up a new virus that no anti virus on the market could delete it had to be manually delete it but to much damaged was caused in the operating control software. Otherwise I would be still using Oginal set up.

Similar Messages

  • When I set up email for the first time, I had to enter a 4 digit pin. Since then, every time I switch my phone on, I have to enter this pin.   How do I remove or bypass the pin so that I can switch on the Iphone without having to first enter a pin?

    When I set up email for the first time, I had to enter a 4 digit pin. Since then, every time I switch my phone on, I have to enter this pin.   How do I remove or bypass the pin so that I can switch on the Iphone without having to first enter a pin?

    Go to Settings>General>Passcode Lock>tap Turn Passcode Lock Off, enter your "pin".
    Edit:  Are you saying you are getting a prompt for your email pin, or are you talking about the passcode lock that appears when you turn the phone on?

  • I have a 3g. Recently I synched for the first time. I also upgraded the software to 4.2.1 The sync took my photos and music off my phone. The photos worked fine. The music has disappeared. It looks like my iphone itunes isn't functioning at all

    I have a 3g. I synched my phone and computer itunes for the first time this week ( I also upgraded my phone itunes software to 4.1.2 ). Now I have no music on my phone, and my computer has seemed to lose the music that was uploaded (It was there for a bit, now gone). I think I should undo the software upgrade. How do I do that?

    not a reply but not sure how to add something to my own thread! It seems that Desktop was damaged too as when I try to open it a screen says there is no application selected to open Desktop with. No idea what I should choose! Any help appreciated, have really made a mess of my MacBook this time.

  • Updated to iOS 7, when my phone came on for the first time I could see I had 2 new viber messages.  When I went to open viber it asked me to register my number, which I did. Once the app was open I noticed all my message history was gone.

    Hi,
    I have only just upgraded to iOS 7 on my iPhone 4 and am having a  problem with Viber. When my phone came on for the first time after the update I could see I had 2 new viber messages, when I went to open viber it asked me to register my number, which I did. Once the app was open I noticed all my message history was gone...
    I still have an itunes backup of my phone just before the update, I restored it to this backup, followed the same process and now viber will not even work (the access code wont sms to me and the phone call option for recieving this code also come up with some error about not being able to do this at this time).
    I have been able to access viber using another phone number (I have two sims which I use as I am currently overseas in south korea, my referenced australian sim has worked previously on viber overseas and I definently do have roaming on) but again I have no message history.
    So to questions:
    1) Why is my activation not working under my referenced australian number?
    2) Can I recover all my message history which should be saved in my itunes backup?  I am willing to revert to this backup state again if needed.
    Please help.
    Thanks.

    Look iTunes>Preferences>Devices...is a backup listed for your iPhone 5 dated BEFORE you restored your iPhone 4 backup to your iPhone 5? If not, your data is gone. If there is a backup, on your iPhone 5: Settings>General>Reset>Erase All Content & Settings. You should now be able to restore that backup, if it exists, to your iPhone 5.

  • Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. what now?

    Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. What now?

    I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?

  • When tried to login WebConsole for the first time 404 not found error got

    Hi All,
    We have recently installed MI 7.0(NW2004s) and configured also as per the configuration document. But when we tried to login WebConsole we are getting the error of 404 not found. I donot know what and where I have test to login to WebConsole.
    Is there any way how to test to login to WebConsole for the first time.
    Appreciate your help.
    Regards,
    Ameer Baba.

    Hi Ameer,
    Can you please try with the link "http://servername:portnumber/nwa", this is to open NettWeaver Mobile Administrator, as on the above reply Namitha said there is no Webconsole on MI 7.0(NW2004s) .
    Regards,
    Satyendra

  • App freezes when JComboBox.addItem is called for the first time

    I have a Swing app that intermittenly freezes when the users go
    to a certain screen. I've tracked it down to a specific line. There is
    a JComboBox on the screen. The application freezes when the
    app tries to load the first item into the JComboBox using
    myComboBx.addItem(Object o). I pass in an Integer.
    The strange thing is that this only happens once a day, or
    sometimes less, in a group of 4 users. But when it does
    freeze, it always freezes on that line. After freezing, the user
    can go back into the app, and go to the same screen(no
    data has changed), and they can get in without it freezing.
    So it seems to have nothing to do with the data - it's purely
    intermittent.
    The only thing I can think of is that the underlying native peer
    for the JPanel that the JComboBox is on, has not been created
    yet, and I'm trying to load an item into a combo box that doesn't
    really exist yet. Anyone know if this is possible? It may only
    happen when the user's machine is running very slow.
    I've included the relevant code below. Any feedback would
    be greatly appreciated.
    Most of the action happens in the class ICS_COMP_PANEL.
    First, in a different class, an object of type ICS_COMP_PANEL
    is created, and then the method startCompensationScreen is
    called on that object. From then on, methods of
    ICS_COMP_PANEL are called. The app freezes on the
    COMP_NAME.addItem(retObj) call in the method
    addCompensationRecordsToScreen.
    In another class:
    screenComp = new ICS_COMP_PANEL(this);
    screenComp.startCompensationScreen();
    public class ICS_COMP_PANEL extends javax.swing.JPanel
    implements java.awt.event.ActionListener
         , java.awt.event.ItemListener
    //this is the comboBox that's causing the problem
    javax.swing.JComboBox COMP_NAME = new javax.swing.JComboBox();
    public ICS_COMP_PANEL(ICS_FOLDER iFrame)
    COMP_NAME.setEditable(true);
    jpanel1.add(COMP_NAME);
    COMP_NAME.setBackground(new java.awt.Color(204,204,204));
    COMP_NAME.setFont(new Font("Dialog", Font.BOLD, 12));
    COMP_NAME.setBounds(357,7,156,15);
    public void startCompensationScreen()throws GException
    //The line below always gets a non-empty hashtable back
    //from getCompensationRecords().
    Hashtable compList = getCompensationRecords();
    COMP_NAME.removeItemListener(this);
    addCompensationRecordsToScreen(compList);
    COMP_NAME.setSelectedIndex(0);
    loadCompensationRecord((Integer)COMP_NAME.getSelectedItem());
    COMP_NAME.addItemListener(this);
    //the only thing to notice in this function is that it loads a hashtable
    //with Integers as the keys and as elements
    private Hashtable getCompensationRecords()
    Hashtable compList = new Hashtable();
    try{
    String SQLStatement = "select comp_tran_number from comp_tran_record where
    comp_ic_tran_number = " + FOLDER.caseNumber;
    gifts.database.ResultSetCopy rsc =
    gifts.global.standardData.ICSServer.resultSetCopier(SQLStatement);
    while ( rsc.next())
    Integer compNum = rsc.getInt(1);
    compList.put(compNum,compNum);
    catch ( Exception ex){
    GTool.errorMsg(this,ex);
    return compList;
    private void addCompensationRecordsToScreen(Hashtable compList)
    System.out.println("add compensaion:");
    Enumeration e = compList.elements();
    COMP_NAME.removeAllItems();
    while ( e.hasMoreElements())
    Object retObj = e.nextElement();
    if ( retObj instanceof Integer)
    //The next line is where the app freezes
    COMP_NAME.addItem(retObj);
    //This should not get called because the itemListener is removed
    //before the JComboBox is filled.
    public void itemStateChanged(ItemEvent e)
    // This method is derived from interface java.awt.event.ItemListener
    // to do: code goes here
    System.out.println("change Item");
    Object object = e.getSource();
    if (object == COMP_NAME)
    Object retObj = COMP_NAME.getSelectedItem();
    if ( retObj instanceof Integer && COMP_NAME.getSelectedItem() !=
    currentCompensationRecord)
    reloadCompensationRecord((Integer)retObj);
    Thanks,
    Greg Sheridan
    GIFTS Software Inc.
    New York, NY

    I am facing a similar problem with JComboBox. It is responding to the first time when items are added to the combo box. Later on, listener does not seem to listen if items are added to the combo box. Can anyone think of a solutiuon for this problem. (it works fine in 1.3 but does not respond in 1.4)

  • Apps bundle suggested when I joined apple store for the first time

    I just set up my new ipad, and on the first time when I got on the apple store, a small screen for a bundle of apps was suggested, for word processing and find my ipad and other usefull apps, I should have chosen to download them all in one go, but I didnt, how can I find it again without going to look for each individuale app manually.

    Follow the procedure described in the link below to get the free apps:
    http://ios.wonderhowto.com/how-to/get-your-free-ilife-iwork-ios-apps-after-resto ring-from-backup-0149021/

  • When I click on Firefox for the first time after I boot my PC it takes three minutes to but after that new Firefox windows open promptly.

    Hello and thank you for being available to receive this enquiry.
    I like Mozilla.
    I like Firefox.
    In recent months I have experienced and accumulation of problems. Today (September 25th, 2011) I have set about trying to deal with them.
    After consulting your Troubleshooting Section I have made a range of changes that I hope shall resolve problems like freezing, unresponsive scripts, non responding windows and browser crashes.
    At the time of writing I have rebooted after making those changes so I have yet to discover whether they solve those problems.
    However, I have chosen o write now as I already am re-experiencing the first problem I encounter when I boot my PC, i.e. Firefox takes three minutes at least to start after I click the icon. Once it has started, however, ne Firefox windows open promptly.
    How do I solve this? I rememebr a time when Firefox opened with lightning speed whenever I clicked the icon.
    Thank you for your valued help and interest.
    Patrick O' D.

    Hello Patrick O' D,
    In my experience t here are two different problems with the speed of firefox on startup
    # your os and setup
    # firefox - and exactly what you use with it
    Some factors will be down to your OS and for instance what does start up initially, many of those factors will affect other programmes/applications and not only firefox.
    Some other factors depend on Firefox and how you set that up, I always like to have the option to using Firebug but realise it cold clash with other software or slow down firefox startup so I only enable it as I need it. see for instance: https://addons.mozilla.org/en-US/firefox/performance/

  • Nothing happening when I plug nano in for the first time- no "source" tab

    I have a 2nd generation 4GB nano, brand new. I used to have a 20GB ipod, hard drive crashed. So I have updated my itunes to 7.0, and charged my nano on a wall outlet.
    I plugged the nano in, with the itunes open, and nothing has happened (it's been over an hour). I've read discussions, everyone keeps referencing "choose nano in the source panel"--I do not have any "source" panel or button on my itunes. The nano screen just says "do not disconnect."
    Any help is much appreciated!
    Sue

    Are you saying that the nano does not show in iTunes? The source panel is always there....it's the panel on the left hand side of iTunes that allows you to look at created playlists (Recently played, music, videos, podcasts, etc). In that area you should see the nano (whatever you named it or it may just say "iPod"). If you don't then go to the Windows "Safely Remove Hardware" utility (it may be open in the area at the far bottom right of your computer screen where the time is. It is an icon with a green arrow pointing left and slightly down in case you are not familiar with it). You can "eject" your iPod using that (click on stop and then another box should open. Click on the iPod labeled drive listed and then click the ok button). Then restart iTunes and reconnect your ipod.

  • How to set PSD as the default for Ctrl-S when saving a layered DNG for the first time?

    Something has changed in my settings!! My Edit>Preferences>File Handling is checked to require Ask Before Saving Layered TIFF Files.
    Today I hit Ctrl-S with a layered DNG and it saved it as an Edit.tif
    What do I need to change so that the default on Ctrl-S from a Layered DNG is a Layered PSD?
    Thanks,

    Similar question. When I hit Ctrl-Alt-S, the default is TIFF; is there a way to make the default PSD?

  • This is the error message i get when trying to install itunes for the first time

    I have never had problems with installing itunes before but on this computer the message says
    could not access network location itunes\.
    Have tried everything and need some help
    No error codes just this message

    download from here,
    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  5.6| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Working in code view selects whole blocks of text when a page is opened for the first time

    This is really annoying feature of dreamweaver, I assume it serves a purpose but I do not know what it is. If I open a document (I generally always work in code view) then select the area I wish to, say, copy and then press control and c, the whole block of code becomes selected (so my selection expands). That isn't what I selected so why does it do this? If I click outside the code view - on to css styles for example - then I can now select the lines of code I want and can work with the code as intended. If I save the document, tab to another document in dreamweaver and tab back again, the same happens. So, everytime I open a document I have to click CSS styles before I can work with the document as intended. I've been working with this for a while and it's go to the point where it makes me cry. It's not quite as annoying as working with the old ftp service but it's not far off.
    Help.

    I think you're describing this well known bug
    http://forums.adobe.com/message/2636948
    Have a read through that thread and see if any of the suggestions or workarounds help you.

  • Another problem when trying to open iTunes8 for the first time

    I have just downloaded iTunes8 and after the installation received the message: - "iTunes has been installed successfully./"
    However, when trying to open it, I too have a problem and the message I get is: - "iTunes cannot run because some of its required files are missing. Please re-install iTunes."
    The previous version ran OK and I have de-installed it and re-installed it 3 times and each time I get the same message that it has been installed successfully but the same message sayind ome files are missing when I try to open it.
    I have checked the QTime is up to date and it is. Anyone else had this problem?

    I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?

  • When starting Lightroom 5.6 for the first time I get the error message "AgPathUtils.getStandardFilePath: can't create directory at: /Users/.../Pictures" when trying to import pictures

    Today I installed Lightroom 5.6 on Mac OS 10.9.4. Photoshop Elements 11 is also installed on this computer. This Lightroom Version is the 30 day test version. My Picture folder is linked to a secondary hdd, but this worked fine with any other program so far. This error keeps me from editing / opening pictures. Any help is appreciated.

    I replaced the symlink with a folder named "Pictures" and it actually worked. At least a new menu shows up. BTW Photoshop Elements does not complain.

Maybe you are looking for