Norton message without Norton

I'm having a bizarre message evrytime I'm starting my Mac. Even if I don't have Norton Utlities I always got the error message: NORTON UTILITIES HAS DETECTED A NEW VERSION OF MAC OS X. YOU MAY NEED TO UPDATE YOUR INSTALLED NORTON UTILITIES OR NORTON SYSTEMWORKS COMPONENTS.
I did a search (find) and I've nothing including the word NORTON.
Any idea?

You may need to run one of their uninstallers:
http://service1.symantec.com/Support/tsgeninfo.nsf/docid/2005033108162039
You should also consider removing Norton from any machine running Mac OS 8.1 or later. A bug has caused any machine with HFS+ to randomly get its directory destroyed by Disk Doctor and/or Speed Disk. Fixing this issue has often required Alsoft Disk Warrior, though the issue may appear on the surface like a partially physically damaged hard drive or controller. Since the symptoms are similar, before using any such utility, you should always backup your data, as my FAQ* says:
http://www.macmaps.com/backup.html
- * Links to my pages may give me compensation.

Similar Messages

  • I keep getting a message from Norton Security that there is an intrusion that is being blocked. The intrusion is always accompanied by this message 'the attack was resulted from /device/harddiskvolume2/programfiles/mozillafoxfire/foxfire.exe. Why is this

    I keep getting messages from Norton security that there has been an attack that has been blocked. It is accompanied by the message that 'the attack was resulted from device/harddiskvolume2/programfiles/mozillafoxfire/foxfire.exe Why is this happening so frequently? Also I was getting a message every time I closed my browser window that Firefox had crashed (even though it had not), and it wanted to send a message to Mozilla.
    == This happened ==
    Every time Firefox opened
    == Two days ago

    I did some searching and found http://community.norton.com/t5/Norton-Internet-Security-Norton/repeated-quot-intrusion-attempt-quot-alerts-from-Norton-AV-2010/m-p/232823
    Maybe that will help? Did you come across a website that said was scanning your computer for viruses? Those websites are really attack sites.

  • My Norton anti-virus not compatible with firefox add-ons anymore? I can't update without Norton being disabled your warning tells me.

    You sent me a software update. It tells me you found an incompatible add-on. It further tells me that my Norton Vulnerability Protection 11.3.0.9-5 won't work with this update, and will be disabled. I'm suppose to wait until they're compatible and then you will update and re-enable my Norton Protection?? I don't know that much about computers but I do know I need to protect it. I just bought this Norton Anti-Virus Protection at Christmas and now you are telling me it's no good? What am I suppose to do in the meantime? Like I said, I don't know much about this so please use simple terms and be specific.
    Thank You!
    Suzanne Noonan

    That link is for the tool bar, not the vulnerability protection component. The latter is a known issue with Symantec and apparently was a conscious decision on their part on getting patches out in a timely manner at the expense of breaking some functionality.
    [http://community.norton.com/t5/Norton-Toolbar-Norton-Identity/Norton-Vulnerability-Protection-and-Firefox-22-0/td-p/980305/page/10 Norton Vulnerability Protection and FF 22]

  • Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue.  I am also unable to send SMS and text messages without them eithe

    Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue.  I am also unable to send SMS and text messages without them either failing or not sending at all.  Is there an outage in the Cleveland, Ohio area (zip codes 44129, 44134, 44137) or anything else I can do to resolve this issue?

    Not that I'm a Verizon employee, but I have experience in the field. An LTE tower will only extend up to, on a perfect day, with no elevation, 6-7 miles. On a typical day, you will be lucky at four (4) miles. The three ZIP codes you've given are all within about a 12 mile radius. That would mean that 2-3 towers are currently down at the same time, and Verizon would know about it within the hour. Being it's Cleveland, I'm sure they would receive numerous calls regarding an outage of that size.
    My point is that if you're having issues in all three ZIP codes, chances are it's a phone issue. If you're handset is simply not receiving LTE, but still receiving 3G, that would signify a SIM card issue. You need to get your SIM card replaced.

  • How can I delete a message without opening an adjacent one?

    Before Yosemite you could delete a message from Mail.app without opening an adjacent message by holding option and clicking the garbage can.
    However, in Yosemite, there doesn't seem to be a way to delete a message without opening (and setting the message's status to "read") an adjacent message.
    I often don't have time to read all the messages in my Inbox so I'll quickly read some important ones and I'll leave the others as "unread" to get back to later in the day. Yosemite Mail doesn't seem to support this workflow anymore…
    Anyone know a workaround; short of manually setting a messages status back to "unread"?

    Ok, I'm answering my own question.  I made up a fake user name to get into my Palm Desktop and deleted profiles.  Then I went in with real user name.  All of my calendar entries were gone, but fortunately within the last month I had HotSynced and was able to HotSync again to get it back from my handheld.  I think I need a blackberry.  This stuff happens way too often.
    Post relates to: Palm m505

  • Can I print a Mail message without multiple recipient names?

    Is there a way to print a Mail message without having also to print the dozens of recipients, where that's the case? I can't see an obvious way, but I'm sure I used to be able to do this. I'd be grateful if anyone knows how.

    HI,
    Go here and download this utility. Print Selection 1.1
    "You can select text and graphics in any cocoa application (safari, mail.app, etc.), go to the services menu and go to "Print Selection" and the selected stuff will be printed."
    Carolyn

  • How can I forward a message without downloading it ?

    I'm trying to forward a message on messages counter change event by adding a listener on my INBOX folder:
    folder.addMessageCountListener(new MessageCountAdapter()   {
              public void messagesAdded(MessageCountEvent ev) {
                  Message[] msgs = ev.getMessages();
    ...  //forward each new incoming messageMessageCountListener works fine, but i'd like to forward my new messages without downloading them and just changing some header information and recipients.
    Can JavaMail do it?
    Edited by: elisad on Nov 7, 2008 7:52 AM

    No, there's no way to do that with the base IMAP protocol.
    There's some new RFCs that would enable that, but JavaMail doesn't
    support them, and I don't believe they're widely implemented by servers yet.

  • Error message without blocking Input fields

    Hi,
    I want to display an error message in the selection screen. The error is for input date validation. But the once error displays in the status bar, it blocks the input fields in the selection screen. I want to display the error message without blocking any of the input parameter in the selection screen. Where should i write the code?
    Thanks in advance.
    Ezhil

    Hi Ezhilhrh
    I think you could have done a trial with different message types before posting this question.
    Please try with success message(Type - S) and DISPLAY LIKE 'E'.
    And also control the program flow using a flag or by checking the initiality of your internal table.
    Regards
    Hareesh Menon

  • "Error Message" without interrupting the transaction

    We use a VB application to insert/update records in a Oracle database.
    Any user is allowed to see all fields, but not every user is allowed to update all fields. We check the right to update in a database trigger and raise an error if a user wants to update a field for which he has no rights.
    User X has the right to update field A, but he has not the right to update field B.
    Now we want to change the application
    If X tries to update fields A and B, we want to accept the new value for A, leave B unchanged and inform the user with a message like an error message without interrupting the transaction.
    Has anybody an idea how to implement this?

    In the project it's presented:
    1) how the servlet can send JSON data depending on the request's parameter
    2) how to obtain this data on the client side and show in on the page using jQuery without refreshing the whole site
    What You need to do is just to send the error (as JSON data) insetad of the values that are passed now and display this error on the page.

  • How to define message without parts in WSDL?

    Hi all,
    I don't know if it is possible, but I would like to create a message without defining part/type.
    Really what I want to accomplish is to avoid the part definition below in my .wsdl file.
    <message name="RCMR_IN000002NR01Input">
    <part name="param0" type="xsd:string"/>
    </message>
    <message name="RCMR_IN000002NR01Output">
    <part name="param0" type="xsd:string"/>
    </message>
    So I would like to something akind to
    <message name="RCMR_IN000002NR01Input">
    </message>
    <message name="RCMR_IN000002NR01Output">
    </message>
    I try to assign a string to RCMR_IN000002NR01Input (I am using rpc literal). At the moment the partnerlink receiving my message gets confused by the param0 part of the XML.
    I hope that description of my issue was not to cryptic to be understandable. Please feel free to ask clarifying questions.
    Any help is appreciated.
    Regards,
    Aagaard
    Edited by: Aagaard on Oct 8, 2008 8:42 AM
    Maybe I should try to elaborate on my use case.
    I pick up a SOAP message from a JMS queue (well, topic really). The message is a domain specific type. I get the content of the message as a string and assign it to a variable with a param0 of type string.
    I then use the contains function to determine which partnerlink to invoke for a given message.
    The invokation is succesful seen from BPEL.
    However, the receiving systems receives my message including the original SOAP envelope - AND including a new BPEL generated SOAP envelope :-(
    This is addition to the following code which was the concern of my original post:
    <part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="param0">
    <param0 xmlns="" xmlns:def="http://www.w3.org/2001/XMLSchema" xsi:type="def:string" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
    So anybody have any ideas as to how to get rid of unnecessary SOAP envelope and that irritating param0?

    Hi again,
    Srin, you were right. I did have a namespace issue. Getting that resolved however, introduced a new error.
    My BPEL process invokes the remote partner, delivers the payload, the remote partner sends back a meaningful response, but no BPEL instance is shown in the BPEL console.
    In the <oracle home>/opmn/logs I find the following errors:
    ORABPEL-05002
    Message handle error.
    An exception occurred while attempting to process the message "com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessage"; the exception is: Exception not handled by the Collaxa Cube system.
    An unhandled exception has been thrown in the Collaxa Cube system. The exception reported is: "java.lang.NullPointerException
    And
    Exception: java.lang.NullPointerException
    Handled As: com.collaxa.cube.CubeException
    +] -> [java.lang.NullPointerException: null]+
    ORABPEL-00000
    Exception not handled by the Collaxa Cube system.
    An unhandled exception has been thrown in the Collaxa Cube system. The exception reported is: "java.lang.NullPointerException
    This seems strange to me. It seems that even if the meaningfull answer from the partner link is lost enroute I should still get a response in BPEL (maybe just null). My next step will be to try and set up a TCP Monitor between the partnerlink server and the BPEL server.
    Any thoughts, hints, ideas and solutions are very welcome.
    Will report on progress
    Regard,
    Aagaard
    Edited by: Aagaard on Oct 10, 2008 10:18 AM
    Update:
    My current thinking is that I have a problem with my message types. The problem is definitely in the way BPEL handles the response from the partnerlink. The nullpointer exception may suggest that I am trying to assign the return payload to an incompatible type. I don't know if it could be an issue if the partnerlink response is some specific type while I excpect a string?
    Anyway here's what my wsdl looks like now:
    <?xml version="1.0" encoding="UTF-8"?>
    <definitions name="RCMR_AR000002NR01"
    targetNamespace="http://com.scandihealth.ccs.webservices.messaging.common/CCSMessageServiceRemote.wsdl"
    xmlns="http://schemas.xmlsoap.org/wsdl/"
    xmlns:tns="http://com.scandihealth.ccs.webservices.messaging.common/CCSMessageServiceRemote.wsdl"
    xmlns:xsd="http://www.w3.org/2001/XMLSchema"
    xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" >
    <documentation>
    WSDL for Service: CCSMessageServiceRemote, generated by Oracle WSDL toolkit (version: 1.1)
    </documentation>
    <types>
    <schema targetNamespace="http://schemas.xmlsoap.org/wsdl/" xmlns:tns="http://com.scandihealth.ccs.webservices.messaging.common/CCSMessageServiceRemote.xsd" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    <element name="msgInputOutput" type="xsd:string"/>
    </schema>
    </types>
    <message name="RCMR_IN000002NR01InputOutput">
    <part name="param0" element="msgInputOutput"/>
    </message>
    <portType name="CCSMessageServiceRemotePortType">
    <operation name="RCMR_IN000002NR01">
    <input message="tns:RCMR_IN000002NR01InputOutput"/>
    <output message="tns:RCMR_IN000002NR01InputOutput"/>
    </operation>
    </portType>
    <binding name="CCSMessageServiceRemoteBinding" type="tns:CCSMessageServiceRemotePortType">
    <soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="rpc"/>
    <operation name="RCMR_IN000002NR01">
    <soap:operation soapAction="urn:com-scandihealth-ccs-webservices-messaging-common-CCSMessageServiceRemote/RCMR_IN000002NR01"/>
    <input>
    <soap:body use="literal" encodingStyle="http://schemas.xmlsoap.org/soap/literal/" namespace="urn:com-scandihealth-ccs-webservices-messaging-common-CCSMessageServiceRemote" />
    </input>
    <output>
    <soap:body use="literal" encodingStyle="http://schemas.xmlsoap.org/soap/literal/" namespace="urn:com-scandihealth-ccs-webservices-messaging-common-CCSMessageServiceRemote"/>
    </output>
    </operation>
    </binding>
    <service name="CCSMessageServiceRemote">
    <port name="CCSMessageServiceRemotePort" binding="tns:CCSMessageServiceRemoteBinding">
    <soap:address location="http://.../HL7Receive_servlet_WS/WS"/>
    </port>
    </service>
    </definitions>
    My assignment / invokation looks like this:
    <assign name="CreateInputParamGenerateMessage">
    <copy>
    <from variable="getContentAsString"/>
    <to variable="RCMR_IN000002NR01Input" part="param0"/>
    </copy>
    </assign>
    <invoke name="InsertOperation"
    partnerLink="RCMR_AR000002NR01"
    portType="ns6:CCSMessageServiceRemotePortType"
    operation="RCMR_IN000002NR01"
    inputVariable="RCMR_IN000002NR01Input"
    outputVariable="RCMR_IN000002NR01Output"/>

  • Cannot return to message list while in a message without clicking on "compose new message icon" and then cancelling it.

    After updating to 8.1 from 8 i cannot return to my message list from inside a message without clicking on the "compose new message" icon and then canceling out of that.
    Also, where it used to say return, it now says "Edit" and the word "Message" on the top of the screens is scruched together.
    Here is a link to a screenshot of my phone from the main messages listing.
    And here is a link to a screen shot of my phone from within a message.

    Hi Sir,
    Code snippet for reference:
    Private Sub Application_ItemSend(ByVal Item As Object, ByRef Cancel As Boolean)Handles OutlookApplication.ItemSend
    Try
       Dim SentMailItemObject As Outlook.MailItem
    SentMailItemObject = CType(Item,
    Outlook.MailItem)
    ‘Can
    we add here User property in Mail Object Reference?
     Catch ex As Exception
    MsgBox(ex.Message, MsgBoxStyle.Information)
     End Try
    End
    Sub

  • Received message without correlationID

    Hi,
    I am facing a strange problem.
    Whenever I execute any JPD in my weblogic workshop using the Workshop test browser, I am getting following error.
    <Error> <WLW> <000000> <Received message without
    correlationID. MessageID=ID:P<294710.1177353184648.0>>
    1. I created a JPD which has a Client Request Node and uses some WLI JMS controls to post messages to a queue.
    When I run this JPD from test browser, I am getting the above error.
    2. Then I created another simple JPD with just one single perform node. Even that gives the same error.
    3. Then I thought it may be a problem with my domain and created a fresh wli domain and tested the JPD. Still the same error.
    I do not understand what could be the problem.
    Can someone help me with this.
    Thanks

    This is a problem with the configuration of your JMS control. For me it worked when I stripped the @jc:jms annotations from the send/receive methods of my JMS control. Following is the code:
    package processes;
    import com.bea.control.*;
    import java.io.Serializable;
    * @jc:jms receive-type="queue" receive-jndi-name="TestQ" send-type="queue" send-jndi-name="TestQ"
    * connection-factory-jndi-name="weblogic.jws.jms.QueueConnectionFactory"
    public interface MyJms extends JMSControl,com.bea.control.ControlExtension
    * this method will send a javax.jms.TextMessage to send-jndi-name
    public void sendTextMessage(String payload);
    static final long serialVersionUID = 1L;
    interface Callback extends JMSControl.Callback
    void pickMessage(String message);
    Message was edited by sodhi at Jan 29, 2005 2:56 PM

  • Multiple files, same structure into one message without BPM

    Hi,
    Is it possible to read multiple files (each with single row) as one message without BPM by some configuration in channel?
    For example:
    input files placed simultaneously in input folder:
    file1: a,b,c
    file2: f,g,h
    file3: k,l,m
    after adapter picks files, xml message:
    <Message_type>
        <RecordSet>
            <file>
                 <A>a</A>
                 <B>b</B>
                 <C>c</C>
            </file>
            <file>
                 <A>f</A>
                 <B>g</B>
                 <C>h</C>
            </file>
            <file>
                 <A>k</A>
                 <B>l</B>
                 <C>m</C>
            </file>
         </RecordSet>
    </Message_type>

    Bond,
    Yes Bond. You can read the pattern what you have given.
    First Read the whole line in the file as one record. Now take the substring or write udf in mapping. This entirely depends upon your requirement.
    Regards,
    ---Satish

  • Collect Message without correlation

    Hi,
    I have a scenario. I have to collect 10 files which has like 100 bytes of information in each file and they should be collected into a single file every five minutes. I dont know whats inside the file. The data may vary...How  do I collect these messages without correlation in BPM? I can relate only file names....there is no relation between them in the payload...
    Also, without correlation, if the file adapter polls every 5 mins and grabs 10 files, how do I control them to process in the same BPM instance (should I use interface namespace in the correlation for single BPM instance) - how to use collect pattern? can I use file name and process them in BPM to be collected????
    Thanks for the suggestions.
    Thilothama

    Moorthy,
    Thanks for the reply. So lets say my incoming
    file 1 has  "This is file 1 content "
    file 2 has  "This is file 2 contennt"
    file 3 has  "This is file 3 content"
    On content conversion I make this to
    <Message>
    <File content>
       <ID>1
       <Data>"This is file 1 content "
    <File content>
    </Message>
    <Message>
    <File content>
       <ID>1
       <Data>"This is file 2 content "
    <File content>
    </Message>
    <Message>
    <File content>
       <ID>1
       <Data>"This is file 3 content "
    <File content>
    </Message>
    Hard code ID and use it in BPM collect pattern??
    Thanks
    Thilothama

  • How to view source of email message without opening the message?

    In addition to Verizon Email, I use Windows Live Mail.  With Windows Live Mail I can view the source of a message without opening the message.  This way I can find out if the message is legitimate or spam before potentially getting hit with malware from a bogus message by opening it.  I can then set up a blocking rule so a bogus message from either the sender or the domain never appears in my Inbox.  I have not found a way to do this in Verizon EMail. 
    Is there a way to view the source of a message without opening the message in Verizon EMail?  Right clicking just opens the message which I do not want to do.

    computerbug,
    You can get a preview of your email.  Log into the Verizon account and go to email > in the top you will see
    Conversations
    Contacts
    Calendars
    Settings
    Click on settings < General settings > Display and you will see 2 options for email view.
    (Preview is not available, if the resolution is less than 1024 by 768 pixels)
    Thanks,
    Tonya D

Maybe you are looking for