Norton Toolbar 5.6 - Works on Laptop FF 4.0.1, but not Desktop FF 4.0.1

Norton Toolbar works on my laptop (HP Envy 17 - 3D), but not my desktop (Dell XPS 7100). Following are the basics of the operating environments and program versions.
Dell XPS 7100: AMD-chip; Windows 7, Home Premium w/ Service Pack 1; FF 4.0.1; Norton Internet Security 2011, v. 18.5.0.125.
HP Envy 17 - 3D: i7-chip; Windows 7, Home Premium w/ Service Pack 1; FF 4.0.1; Norton Internet Security 2011, v. 18.6.0.29.
I have run liveupdate every few minutes, but still the Norton Toolbar is not updated. When I check add-ons Norton Toolbar 5.5 is disabled; but my laptop add-ons shows Norton Toolbar 5.6, and IdSafe and SafeWeb are definitely present and working on the laptop.

I had the same problem. Solved by downloading latest update from Symantec and letting updater run. This does not require an uninstall of the current version but may require a reboot.
Links below for latest version updaters:
Norton 360
http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&selected_nav=&pvid=&entsrc=CED_pubweb&layout=&docurl=20090225155411EN
Norton Internet Security
http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&selected_nav=&pvid=&entsrc=CED_pubweb&layout=&docurl=20080904160721EN
Hope this is of use

Similar Messages

My Norton Toolbar won't work in Firefox 8.0. How do I restore an earlier verions of Firefox (7.x)?

Every time I have upgraded in the past, Firefox has said the Norton Toolbar wouldn't work after the upgrade. Each time it actually did work, except this last time, when I upgraded to 8.0. How do I restore Foxfire to an earlier version (7.0.1)?

For Norton Internet Security <br />
http://community.norton.com/t5/Norton-Internet-Security-Norton/Firefox-10-Support-for-Norton-Toolbar/td-p/648241
For Norton 360 <br />
http://community.norton.com/t5/Norton-360/Firefox-10-Support-for-Norton-Toolbar/td-p/648245

Just d/l FF 8..and My norton toolbar still doesnt work

I had d/l the last version of FF and my Norton toolbar didn't work.
So I down graded to 3.? where it had worked, but it didn't. So today hoping u had it fixed I d/l ver 8, but no it doesn't work. I pay about 25 bills on line and I have different passwords, etc for each, do I use my Norton Identity safe many times each day. If I cant get it w/ FF I will use IE. If u get it fixed please email me and I will reuse FF Thanks

If Norton updates as with Firefox 7, the update will be available later today through Norton Live Update. Norton will not release an update until the Firefox 8 update is available to the general public; that occurred less that 2 hours ago at 8 a.m. Pacific time U.S.A. Check the Norton forums for the latest news.
*Norton forums: http://community.norton.com/
Firefox 8 will automatically disable third-party add-ons. You are presented with a screen on the first startup ('''''and only on the first startup''''') of Firefox 8; look at it carefully and check the items that you want enabled. You can also look in Add-ons > Extensions and Add-ons > Plugins to see what might need to be enabled there.
*See --> [https://support.mozilla.com/en-US/kb/Add-ons%20are%20disabled%20after%20updating%20Firefox Add-ons are disabled after updating Firefox]
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

Adobe Photoshop CS4 message: "Licensing for this product has stopped working." I have the serial number but not the media. How do I use the software?

I recently tried to use Photoshop CS4 that I have on my computer but I get the message:"Licensing for this product has stopped working." I have the serial number but not the media. How can I use this version?

You can get the installer here: Download CS4 products
It will install as a fully functional 30 day trial. Entering your serial number will convert it to a permanent version, Standard or Extended, depending on what serial number you purchased.
If you still have the license problem. get back to me with your OS details and the error code.
Gene

I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7

I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7. Surely there is software that will allow older scanners to work on OS10.7. My MacBook Pro runs 10.6 and the

Although the HP Scanjet shows up in the system profile for the computer it is generic and is not configured (as in screen shot). It also does not show up in the ;ist of pritnters, scanner when I open Image Capture. I can't load the software that came with the printer because it is out of date so that would make it impossible to configure the scanner on the new iMac. see below: Too bad there isn't some generic profile I could load that would cover the 5550c. I have a new all in one printer-fax-scanner but the old one can scann in slides and negatives which I have.

HT1349 My home button isn't working. It works to put it in dfu mode but not to return to home page where my apps are. Can anyone help please?

My home button isn't working. It works to put it in dfu mode but not to return to home page where my apps are. Can anyone help please?

Try:
http://snapguide.com/guides/calibrate-your-home-button/?utm_expid=69945963-15
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

PC Used to work with XP and airport Extreme Basestation but not with Vista

Please help, my PC Used to work with XP and airport Extreme Basestation but not now with Vista. I have a MacBook Pro connected and also a Mac Pro connected to the network on it and they still work, i have put the latest software on the PC and the firmware is up to date. The only thing i can see on the network on the PC is the basestation Hard Disk (shared also to the Macs) but i cannot connect with the password, i have tried everything in my knowledge, including formatting the machine and reinsatlling OS and changing security setting to no avail. Any ideas anyone?

With regard to your printer problem - take a look at this discussion:
http://discussions.apple.com/thread.jspa?messageID=6312413&tstart=0

HT1386 I am having trouble synching all 1700 songs that I just put into iTunes Music Match onto my iPod Classic device. It worked on my iTouch and iPad devices but not the Classic. How do I transfer the music successfully

I am having trouble synching all 1700 songs that I just put into iTunes Music Match onto my iPod Classic device. It worked on my iTouch and iPad devices but not the Classic. How do I transfer the music successfully

It should sync the same if the songs are the same. You can try:
- Unsyncing all music and resysncing
- Restoring the iPod
BTW, yo posted in the iPod touch forum

TS1398 My iPad & iPhone won't connect to iTunes store.... it worked just fine earlier today... but not now. Nothing has changed. I've gone through all of Apples suggested troubleshooting guides but it still won't work! Help?

My iPad & iPhone won't connect to iTunes store.... it worked just fine earlier today... but not now.
My daughter also has an iPad and an iPhone and these too won't connect either (use the same iTunes account)
Nothing has changed since this morning, I've gone through all of Apples suggested troubleshooting guides but it still won't work!
Help?

p.s. I just signed out of my apple id on daughters iPad and tried to create a new apple ID and still got the message CANNOT CONNECT TO ITUNES STORE......
so is this a problem with apple rather than my devices? Just seems weird that all our apple devices are doing this this afternoon when they were just fine this morning.......
P.P.S Just got a text from a friend with iphone and ipad......they are having same issue so at least I know it's not just me, so what's going on here APPLE?????

Norton toolbar doesn't work on desktop but does work on laptop. Desktop shows toolbar disabled but there is no "enable" button

The Norton toolbar does not appear on my desktop version of Firefox 24.0. It does appear on my laptop version of Firefox 24.0. The desktop shows that Norton was disable as incompatible with 24.0. But there is no "enable" button. How do I get Norton toolbar back?

Hello,
It sounds like you may be using different versions of the Norton toolbar. The one on the desktop must be older and not updated for v24 of Firefox. The one the laptop must be newer.
See here for where to get the latest version of the Norton toolbar:
https://support.norton.com/sp/en/uk/home/current/solutions/v58055475_EndUserProfile_en_us
On a side note v24 of Firefox is no longer the latest version. To get the latest security updates you should update to v25. See here:
[[Update Firefox to the latest version]]
I hope this helps. Let me know if not.

I KEEP GET MESSAGES TO UPDATE FIREFOX IF i DO MY NORTON TOOLBAR WON'T WORK UNTIL YOU FIND A SOLUTION CAN I STOP ALL THESE UPDATE MESSAGES?

i HAVE ALREADY STATED THE PROBLEM

hello, norton is always making compatible version of its toolbar available, the day a new firefox is released, so it will already work in firefox 26. please run the norton liveupdate utility repeatedly & until all components are up-to-date. in addition make sure that the toolbar is enabled under ''firefox > addons > extension'' afterwards.
for more information please refer to http://community.norton.com/t5/Product-Update-Announcements/Firefox-26-Support-for-Norton-Toolbar/ba-p/1062143

I have a C6380, The printer works with my laptop running Vista and MacBook but not Windows 7. Why??

I have had my C6380 for quite a while, now. I have a personal laptop running Vista and have no problems. I have a MacBook for work that I use with the printer with no problems. I also have a desktop that was working well for a long time with this printer and for the last number of months (I haven't counted), I have been having a lot of problems.
Either the computer cannot find the driver or the computer delivers a message that the printer is off line (even though it works with the other computers). I use the C6380 via a home wireless network.
Reinstalling the HP Software helps for a short time, but the problem soon recurs.
I cannot seem to find anything in any of the Trouble shooting guides on HP or MS websites. HELP!

If it works on one Firefox 3.6.10 installation, it should work on the other - assuming both PC's have exactly the same version of Norton installed, including that Firefox Toolbar extension. Another possibility is that Norton uses a different version of their software on WinXP than they use on Vista.
Tools > Addons > Extensions - does the Norton Toolbar show as being incompatible?
You could try forcing a Norton program update to see if their Firefox extension gets updated.

Why can i get a connection w/my wireless laptop with this router (WRT54GS ) but not on the desktop?

I have an excellent signal w/this laptop (wireless) but when I try to use the desktop with the same router it wont go. Do I need driver download? Do I need an IP address for the router? I use tech support for connecting the desktop to the internet straight from the modem they sent me but because I didnot buy the router from them, they wont help me figure out once I plug in the router and setup more than one machine, i cant do it. Initailly, I setup everything w/my laptop being the main computer in my home until I got this desktop recently. So knowing the desktop is fine because it works straight from the modem, and the laptop works w/the router and modem hooked up together but not the desktop, what the HECK is the problem? I dont have any cd or anything w/this router because when I moved, i never found the box it came in again. Is there someplace online I can find what I need? Im wondering how I will know if I have a response from someone on this thread? will I get an email from this site? gosh Im confused.
(Mod Note: Email address removed.)
Message Edited by kent07 on 10-28-2009 07:29 PM

How you are trying to use the desktop...wired or wireless?
If you are trying to connect the computer to the router via an Ethernet cable then,try changing the cable.Check the ip address you are getting on the computer...
Click Start >> All Programs >> Accessories >> Command Prompt...A black box will appear(Command Prompt)...In the Command Prompt window type ipconfig and press 'Enter'...Look for Ethernet Adapter Local Area Connection IP Address , Subnet Mask and Default Gateway...
IP Address should be 192.168.1.x, Subnet Mask : 255.255.255.0, Default Gateway : 192.168.1.1 (assuming your router is 192.168.1.1)...
If you get the above mentioned IP Address, Subnet and Gateway Address then you should ping the Gateway, type ping 192.168.1.1 and press Enter...If it gives you request timed out then disable any firewalls, security softwares on the computer...
If you get 4 replies then type ping 4.2.2.2 and press Enter, if you get request timed out, then you need to upgrade your router's firmware...If you get 4 replies then type ping yahoo.com and press Enter...If you get replies for Yahoo then you should get the Internet after adjusting the browser settings...
Adjusting Browser Settings : Open an IE, click Tools >> Internet Options, then delete all files, cookies, history, forms...Goto "Connections", make sure Never Dial a Connection is checked, click on LAN Settings and make sure all the options are unchecked...Once you are done click on OK...Close the IE and re-open it...
If yahoo times out then provide static DNS on your LAN Connection...
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local Area Connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the Following DNS Settings' Preferred DNS 4.2.2.2 Alternate DNS - 192.168.1.1>>Click on Ok button to Save and Click on "Close" on main Properties window...You should be able to go online...

Wifi not working with iTunes, apps store and some, but not all Internet sites....why???

Yesterday I noticed while browsing Internet that some sites would not open and that some games I regularly play would not open. I also found that I could not open either the apps store or iTunes. Everything seemed to be working the day before and I have not recently upgraded ios (been on version 6.1.3 for a while) or changed any settings on my iPad (2). With Internet research today I found suggestion that if I switched to 3G I would be able to access these apps and,sure enough, under 3G connection everything works fine. Some other forums suggest changing wifi router settings to fix the issue ....I have not tried this as I wouldn't like to mess with my router and end up effecting other peripherals/pc's connected to it that are working fine....especially when I am not terribly IT savvy when it comes to hardware settings. But as I haven't changed anything on my ipad why would my wifi suddenly stop connecting to some apps on my iPad, but not all??? Interestingly I can access many Internet sites (forums) with wifi connection but not the apple forum! To get to anything apple related I have to switch back to 3G ....that includes checking the iOS version I am on via settings!
I also mention that I have done all the other suggested fixes found on various forums, such as rebooting iPad, renewing wifi lease, clearing cookies, closing all apps etc etc, to no avail. Seems the only suggested fix I have not tried is mucking around with my router which I am very hesitant to do given the **** I went through with my telco when my home Internet connection suddenly stopped working last year. Took me weeks of phone calls to get my internet connection back and being forced by the telco to a more expensive plan, hence very reluctant to start mucking around with that side of things, but why should I need to when it does seem to be working ok with other devices in the home?
I have started this as new discussion as, even though I am not terribly IT savvy, I cant see how this could be related to the wifi issues that many on the newer devices (iPhone 5 and iPad mini etc) are reporting as I haven't recently upgraded anything on my ipad and all was working perfectly up until yesterday.
Any other suggestions on how to get wifi working correctly again on iPad or do I really have to risk the working of every other device in my home and chase it from modem/router side?

Hi there,
You mentioned that you have tried a few troubleshooting steps already, but you may want to take a look at the article below, specifically the section titled "If you are unable to access the Internet while connected to a Wi-Fi network"
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Hope that helps,
Griff W.

Scripts works in Simulator and Apple DVD player but not on TV

I have a basic project with two different tracks.
The first one is video and audio. Plays "as is".
The second has video, two audio and one subtitle. Depending on which button, the second Track should be played with different audio and with/without subtitles.
(I use GPRM 1 to set the subs stream, GPRM 2 for the audio and GPRM 3 for menu button navigation).
On the second Track I have a pre-script that sets the streams depending on the value of GPRM 1 and 2.
Works fine in Simulator and in Apple DVD player, but not on the stand-alone player.
Any idea what might be the issue here?
in short:
Button 1: Play Track 1 "as is" (audio 1, no subs)
Button 2: Play Track 2, audio 1, subs on
Button 3: Play Track 2, audio 2, subs off
Button 4: Play Track 2, "as is" (audio 1, subs off)
Menu button and End Jump should go to the corresponding menu button.
Many thanks for your help.

It is part personal preference, part artistic, part what makes the user experience the best so there may not be one "right" answer and I have often made menus one way than changed them when viewing the DVD for something that seemed to work better.
Looking at you description I started playing with some ideas in my head and started typing them, then changed what I was writing
It sounds like you want chapter selections for both track 1 and track 2? If so it may make sense to have the initial menu have Track 1 and Track 2 buttons which then link to sub menus where there is "Play All," selections for each section of each movie and one last button for the preferences.
Alternatively you could also place the preferences selection button on the main menu, though since Track 1 does not sound like it really has preferences you need to make sure that users do not become confused and think they have turned something on/off and are not seeing these options when they thought they selected them when they play back Track 1.
Also with 6 to 8 chapter markers you may be getting close to the point where scripting could make it easier if your selections are just to play the sections - in other words for track 2 four stories take care of the combinations Audio 1/Sub Off, Audio 1 Subs On, Audio 2 Subs Off, Audio 2 Sub On. If the chapter selection starts the track a scene then plays through you can target chapter markers in the story so 4 stories takes care of it. If you are just playing sections you would need 4 x 6 or 8 chapters - 24 or 32 stories roughly. But it is actually fairly quick to do - just set up the intial Play All with all subtitles and audio selections unchecked except for "1" then copy from there. Probably should take under 10-15 minutes or so
Put a real quick thing together for a quick view of the tracks. I can flesh it out more if you like.
http://www.dvdstepbystep.com/081107Sub.dmg
The main menu will be the title menu, then the sub-menus (including the set up menus) can be placed in the same VTS as the applicable tracks which can help a bit with DVD performance speed. Since there is 6 to 8 chapter markers on a track each of the main sub-menus would have 8-10 buttons which can work in the design.

Norton Toolbar 5.6 - Works on Laptop FF 4.0.1, but not Desktop FF 4.0.1

Similar Messages

Maybe you are looking for