Not 4.0. After DL of 4.0 About shows 3.6.10?

I was looking to DL the 4.0 version of FF as I need it for school and not much into IE. Additionally, I am looking to use the mobile version with Android assuming it works with my Optimum 6 along with my new tablet. The mobile piece is separate as I am researching that for a law enforcement and security agency. In DL and installing 4.0 on my HP laptop the "About" shows a 3.6.10 version of FF not 4.0.

make sure you download Firefox 4.0 from Mozilla www.mozilla.com and not some random download site somewhere. You also could have both Firefox 4.0 and the 3.6.10 and what ever way you started Firefox it was pointing to the 3.6.10.
As for mobile Firefox for Android, you need at least Android 2.0 (1.5/1.6 is not so common now on newer devices anyways) and the cpu has to be a ARMv7 type as ARMv6 is not supported.
https://wiki.mozilla.org/Mobile/Platforms/Android

Similar Messages

  • HT1491 My password in iTunes will not work, even after changing it. It keeps showing a window to add PW. I do and it pops up again.

    My PW in iTues will not work. Even after changing it. Window pops up and ask for PW. Over and over.

    I would be worried about that - but it may turn out to be nothing.
    Since you already changed your password, you're probably OK - but I recommend looking at your purchase history to see if there's any unauthorized purchases (use iTunes on your Mac or PC to go to the itunes store, then click your account in the upper-left or upper-right corner). If there are any new purchases that you didn't make, click the button to report problem (and if they happened after you reset your password, you should immediately change your password again).
    I think sometimes when you change your password and verifiy your credit card info, it can "reset" the warnings - so it may actually have been you logging in to your own account that caused you to get the warning. But I'm not absolutely sure of that, so it's best to check your purchase history (and reset your password if necessary - but you already did that).
    I also recommend turning on "two-step verification" (but Apple makes you wait a few days after changing your password to turn that on). With "two-step verification", Apple will send you a text message with a 4-digit code the 1st time you try to buy something from a new computer - since a hacker won't have your phone, they won't be able to continue (theoretically). After the 1st time, it goes back to mostly working normally (until the 1st time you  try to purchase from another new computer, then you get another text message - so this alerts you to someone, somewhere else, trying to get into your account).

  • My ipod touch does not start up after resetting

    my ipod does not turn on after I reset it. It shows an apple logo and flicker white screen until the battery goes dead.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                                                       
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Not wake up after sleep

    My new (2011) MacBook Pro does not wake up after sleep and this happens about 1 time in 10.

    Hello, I have a Mac Book Pro and have the same problem, I close the lid, I have tried every possible thing I have read, and the problem is still here.
    Things I have done:
    - SMS Reset.
    - PR reset,
    - Installed Caffeine and solve temporaly the problem, but using annother display.
    The mac´s screen only turns on some seconds in grey when start chim sounds, but it turns off, however, I could run the mac but keyboard, keyboard backligth´s and mouse pad don´t work
    I ran the Apple Hardware Test complete and It says there is no problem. This not The truth.
    Thying a solution, I did a recovery from newest version and now it get worst and only can see the computer torning on, chim sounds, screen goes on in grey, them screen torns of ando the white ligth gets on and some seconds later start twinkle. Even when the lip reamins opened always, nor the keyboard, keyboard´s bacligth and the mouse pad woks.
    I for real don´t know wath to do, I am almost crazy, almost trow this mac to the trash and buy a new windows computer. Please, help to recover my mac!!!

  • Can not refresh page after save properly(When not saving master record)

    I am using jdeveloper 11g R2 (11.1.2.3) JSF Facelet
    In some use case I have Address as master table and Person as detail table
    For some business reason I need to don't save same addresses
    eg:
    If +1 Test St+ is in database already and new user coming and adding this address with new person
    I need to use the row in database not creating a new address
    I do saving in doDML method of Address with some hashing algorithm and it is fine
    My problem is that I can not refresh page after save properly
    User coming to page think Adding a new address and a new person but in fact no new
    address added because of business I describe above
    Any ideas how I can implement this?
    Appreciate that
    Regards
    Mohsen

    Hi,
    from your description it is not clear why the page doesn't refresh. It could be a problem in your implementation code - who knows. What if you perform the address check on a command button that actually submits the new address? If the check returns true (address exists) you would call row.refresh(forget new row); and re-query the view object so the address coming from the database is displayed. If you wanted to use the doDML then yuou need to be aware that doDML doesn't help removing the row the user created. It just ignores the database update but the entity is still around, which in my suggested solution wont be the case.
    Frank

  • Can not access BIOS after update BIOS

    Can not access BIOS after update X220 BIOS to version 1.19
    Type: 4290-R32
    BIOS: 1.19
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj09uc.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj09uc.iso
    Ask google and try anyway but not work
    - Press ThinkVantage, Press F1, Press Fn+F1
    - Power off, unplug AC, unplug battery, wait 15 miniute, try all again
    - Try to update BIOS again

    That is really weird.
    When you are in Windows, can you test and see if the F1 key is working? If it is working. Shut down the laptop then boot it back up. At the Thinkpad screen, keep spamming the F1 key and see if you are able to boot into BIOS.
    //JameZ
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

  • Screen fields not getting displayed after Line 16

    Hi All,
    There is a screen exit created in IW51, now the new requirment is to add 3 more fields.  I added the fields below the exiting fields, in line number 15 , 16 &17. After executing the Tcode I could find that the field created in line 17 is not getting displayed in runtime. I have increased the screen length. The fields if moved to line numbers below 16 then they are getting displayed. Can anyone help me to find why it is not getting displayed after line 16.

    Hi,
    Can you give me the Enhancement name?
    I searched for the exits using package , but i did not find any screen exists for that IW51 Tcode?

  • Iphone 4 front camera not working even after reboot,resets and restore.

    i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
    Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help me

    If setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
    How to back up your data and set up as a new device
    Apple - Support - Service Answer Center

  • There is a problem on my mac mini. I install windows7 in my mac then i cancelled the installation did not finish..after that i saw the black screen on my monitor..

    There is a problem on my mac mini. I install windows7 in my mac then i cancelled the installation did not finish..after that i saw the black screen on my monitor untill now the monitor is black..

    It maybe trying to boot from the incomplete install.
    Try starting your Mac while holding down the Option key, it should then list all the available boot drives including the Mac OS X one. Boot from the Mac one and then you can wipe the damaged PC one or set the Mac to stay booting in to OS X.

  • Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options.

    Why can I not disable the guest user in the 10.8.2 update? I have never enabled the guest user, but after the update, it was automatically enabled with a "managed" tag. It is not selectable even after entering my admin password to unlock the options. I was able to select the account under "parental controls", but again, could not delete it. Why Apple? Why?!!????

    SOLVED Ok. I actually was able to disable it. I had to actually log in as the guest user to make it accessible in the preference window. Then I disabled it and logged out. Apologies if this was obvious for some people, but I have had some sort of issue with something every update since Snow Leopard.

  • HT201269 When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a serve

    When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a server error. Have no clue what to do... I've restarted the iPad and get the same message. But my internet works just fine.

    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • In my MacBook Pro, finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see top bar(Apple, Date, Wifi). Even in safari address bar not accepting

    In my MacBook Pro(10.7.5), finder is crashing after logging in. It is showing crash report with Relaunch option, when i click on Relaunch option finder is working properly but i am unable to see Top bar(Apple logo, Date and Wifi etc... bar). Even in safari address bar, TextEdit not accepting any text means when type something not showing up and also i am unable operate any thing from keyboard. Plz help me…..

    One thing that you can try is installing a 'fresh' version of OS X Lion. Boot into your Recovery partition (holding down the command and R keys whilst booting) and elect to install OS X from the Recovery screen. You need not erase your hard drive and you should not lose any of your data.
    Oh, and just as a precaution, I would use Disk Utility, once you're in Recovery mode, to verify your hard drive before trying to install the OS again.
    Clinton

  • Accounting document not clearing even after payment posting.

    In document flow of may cash sale process showing the accounting document 123-- Not cleared.
    After payment receipts in FBCJ and posted & saved, eventhough the accounting data not clearing, but in FBL5N the report is updating, what can be the step i am missing to update the document flow TOP to BOTTOM cleared.
    Waiting for your replies
    Thanking you,
    Veera

    Dear,
    Kindly use the transaction F-32  (Clear Customer).  Select both Uncleared items or document numbers.
    Regards
    Ramesh

  • My iPod 5th gen is not turning on after iOS 8 update!

    My iPod 5th gen is not turning on after iOS 8 update! Before this all happened, I noticed that my apps crashed unexpectedly, it was laggy, and it decides to reset on its own at times. I CAN'T charge or plug it into my computer. Also, my home button is sunk in but my sleep/wake button at the top is most definitely not. I know my iPod was not running out of battery and I did not even power it off. I am very disappointed but I really need it to turn on =/

    Try:                                               
    - iOS: Not responding or does not turn on           
    Ignore the reset and when it says place the iPod in recovery mode
    Place the iPod in recovery mode using one of these programs:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    or
    http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                          
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:       
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable              
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Billing document should not be cancelled after creating return sales order

    Hi All,
    Billing document should not be cancelled after creating return sales order with reference to billing document. Please suggest configuration settings on the same.
    Sudheer.

    Hi,
    In SAP, when the sub-sequent document is existing , we can not cancel the preceeding document. Therefore if you want to cancel the billing document you need to calcel the documents which are created with reference to that.
    Check and confirm.
    Regards,
    Ravi Duggirala

Maybe you are looking for