Not a common issue on update/restore
Hi there.
First off, this is a nice forum. I read a lot here when I Was a guest ;D
Well, after 2 days looking over the internet I just give up.
This is my last choice I think.
Here is the problem.
My desktop Manager allways show Device Connected (Pin): None. It's not a problem because I can just click and set the usb device pin.
Well, I did a full wipe (error 507) and on the middle of update after "loading module "net_rim_cldc.cod my device just Shutdown and I can hear a "pop" from the device. Well, DM just ask me to try again. So, I just wait the device reboot on error 507 and sometimes de net_rim_cldc.cod pass fine, but on the midle like language or something "pop" my device shutdown again.
I tried on 2 pcs and the same problem.
I tried also using loader.exe /nojvm, it's detect fine my usb device, do a erase/load rom perfectly. but again when it's copyng the files "pop" the device suddenly shutdown and autorebook
So, I ask... Could this be a batery problem? or something else?
My device is a nextel brasil 8350i. My DM is the lastest version, the software installed is the 8350iAMEA_PBr4.6.1_rel459_PL3.1.0.31_A4.6.1.313_Nextel_Communications_Inc also I tried the 8350iAMEA_PBr4.6.1_rel302_PL3.0.0.70_A4.6.1.194
Thanks and sorry my bad english
Edited: Here some screenShots
http://img237.imageshack.us/img237/8545/45049011.jpg
http://img42.imageshack.us/img42/6370/70456439.jpg
Are you performing this install using Desktop Manager?
Try this method:
First locate your carrier and the OS file you wish to use.
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
1. Download the OS file to the PC then install it to the PC by running (double clicking) the file you downloaded.
2. Go to c:\program files\common files\research in motion\apploader and delete the file named "vendor.xml."
3. Plug in BB and double click on "Loader.exe." It's located in the same place as the above vendor.xml file.
AND, make certain your device is connected to a USB cable which is connected to a REAR USB port on the PC -- not a front USB port or a USB hub.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
My ipod says it's up to date, but it's not and I can't update/restore
Itunes updated to 7.0.2 and I can load up my own CDs onto my ipod nano. I can buy new tunes on the internet and they load into my itunes library but the purchased tunes don't load onto my ipod - I keep getting a error message that my ipod software is out of date. I've tried uninstalling itunes but keep having the same problem. My ipod preferences page tells me I have software version 5.1 on the ipod. I can see the buttons for update/restore, but this whole section is grayed out and the buttons don't work. What can I do?
When you come back, try this.
Click on control panel/admin tools/computer management/disk management/right click on the iPod to re-assign the drive letter.
Choose something lower down the alphabet, say 'M' or something similar.
The iPod can be confused by any other storage devices assigned a similar drive letter even though they may not connected at the same time.
If the device manager is empty, see this: iPod not appearing in Windows device manager.
It's a long shot but worth a try. -
TS1398 Wifi not responding after the software update. restored the system but still no luck.
After I updated the software, the wi-fi has stopped working. I have already restored the system but the problem remains. Wifi is working fine otherwise.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
IPod not recognized in iTunes after update/restore
I was prompted by a message (don't remember the exact verbage) in iTunes to restore my iPod. It appeared to download and install an iPod update. Then when iTunes restarted, the iPod was no longer recognized by iTunes. The iPod still charges and iTunes still starts when it is plugged in but no devices are listed.
A connectivity test shows: iPod service is running, iTunes Helper is running, Apple Mobile Device is running. USB ports verified, FireWire (IEEE 1394) ports verified, iPod found. All tests passed.
The iPod is still visible in Windows but when I attempt to navigate into H:\iPod_Control\iTunes or H:\iPod_Control\Music I get the message: "(directory) is not accessible. The file or directory is corrupt and unreadable."
I have done the first 4 of the 5 R's; obviously not able to restore presently as the iPod is not recognized. I tried manually setting to disk mode- no luck. I tried uninstalling/reinstalling iTunes as well.
Any suggestions are greatly appreciated.
Message was edited by: Sgt HowieHi. I had the exact same problem that you identified. I came across a tip somewhere to delete the contents of the pictures folder. When that didn't work for me I figured I'd go for broke and format the darn thing. From windows explorer I right clicked on the ipod volume (for me it was J: drive) and format. After I unplugged and replugged the usb cord, iTunes recognized the ipod again.
Hope that helps. -
IPhone 4 issues with updating, restoring and unresponsiveness.
I plugged my iPhone 4 into itunes to update. The update 6 successfully downloaded, but when I tried to update my phone it did not work, stating that there was an error, and the phone must be restored.
After unplugging the phone and reconnecting it, the following message appeared: "iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes."
Now the screen on my iPhone says to connect to iTunes, which I have, and the PC (latest windows update), is remaining unresponsive to the phone and repeatedly displays the message mentioned above.
I also see when choosing a product below, that this phone is apparently not even registered with my iTunes account, which I thoroughly remember doing nearly 3 months ago.
This sounds typical, but please help as soon as possible- I am going on holidays tomorrow morning (it is currently 6:30pm), and I really need thisphone for photos and communication.
Thank you.After pressing restore, it says that an unknown error occured.
After reconnecting the iPhone iTunes is not recognising it. -
After the latest FF update every page seems to freeze up and I get script error pop ups that cause the FF browser to hang forever. Only happened after updating FF and shockwave, I have had to disable shockwave flash which seems to fix the problem, but I can't watch videos. I had to add the NoScript addon just to see browser pages... not very good as it kills pretty much everything. Also I noticed that the newest version of java deployment kit has been rendered UNSAFE by FF. Why, and what to do about that issue also? Thanks.
The combination of a recent Windows update and the Flash player plugin's protected mode caused pages to hang for me with the eventual script error.
* You can disable protected mode following the steps in this support article from Adobe under the heading "Last Resort": [http://forums.adobe.com/message/4468493#TemporaryWorkaround Adobe Forums: How do I troubleshoot Flash Player's protected mode for Firefox?]
* My thread: [https://support.mozilla.org/en-US/questions/962798?esab=a&s=&r=0&as=s Flash hangs Firefox (eventually get script continue/stop dialog)] -
Black Screen Mac OSX Yosemite (though not the common issue)
Hi all I've read a lot of posts already about the black screen that seems to be plaguing people lately, but my issue seems to be slightly different. When I open Spotify it loads for a while (about 2-3 minutes): http://i.imgur.com/4qQYdJI.png Then, for no more than a minute, I get the fabled black screen. Nothing loads, playlists are blank, and nothing can be selected to be played: http://i.imgur.com/wFNWMpe.png Before long, however, I reach the final stage of blackness: http://i.imgur.com/I9uQotr.png All I can do by this point is use the play/pause button on my mac, which will continue to play Mark Pritchard's 'Elephant Dub' (which, don't get me wrong, is not a bad thing--could have far worse tracks to get stuck on). I've tried reinstalling Spotify multiple times with no luck. I have noticed however that there is no Spotify cache and no folder in Application Support, and reinstalling does not bring these back. Does anyone have any suggestions? I'm running OSX 10.10.4 if that at all helps. Thanks in advance!
Hi
they are asking me:
1) if You followed the steps listed here when reinstalling: https://support.spotify.com/learn-more/faq/#!/article/reinstallation-of-spotify
2) the exact Spotify version that he's running. He can find this by heading to Spotify > About Spotify.
Thank you!
Best regards,
Camillo -
After updating my iPhone 4 to iOS7, the controls on the headset are not working anymore. However, the controls are working on my friend's iPhone 5. Is this a common issue?
ofel wrote:
After updating my iPhone 4 to iOS7, the controls on the headset are not working ..
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
Since updating to iOS 5, the delete buttons on all my apps are missing. I did a hard shutdown, but that did not resolve the issue. Would appreciate any suggestions to resolve this issue.
There is No Pre-installed Youtube App in iOS 6.
http://itunes.apple.com/app/youtube/id544007664?mt=8 -
I heard about all the problems with the new iOs 7 update but also heard Apple would force me to do it. I tried to update but didn't have enough space. Had to delete ALOT of my apps and still not enough space. Phone was working perfectly fine and message pops up that "I will not have any service until I restore to iTunes. I plug into laptop to restore and it forces me to update to iOs7. Takes 3 hours. It updates but phone doesn't restore. Have tried all the troubleshooting tips:reset to factory settings, recover etc. Got a new SIM card because it said I don't have one but I do. Apple support wouldn't help me because I was out of warranty, and said I would have to pay. Went to the Apple store and they couldn't fix it and said "it's a hardware issue" that will cost me $170.00+. I FIRMLY BELIEVE THAT THE NEW iO7 FRIED MY PHONE'S HARDWARE. The phone is on the HELLO stage and keeps searching but will not activate to server- it's temporarily unavailable. Have tried multiple times.I have a 3 year contract with Rogers and the phone is less than 2 years old. Apple needs to take responsibility for crashing my phone. I NEED A FREE NEW PHONE!!!
Restore it to factory settings, then set it up from your back up. Did this last year when I got my new iPod, and it worked. I have no idea why syncing OTA can sometimes glitch, but hopefully this will help.
-
sir my iphone 3G was not on due to software update and its not resotre previous software and shown as error 1051 kindly resolve my issue as soon as possible
The easiest way to fix the hosts file is to restore it from a backup that predates the modification, or to copy the unmodified file from another Mac. If you can't do that, then do as below.
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Paste into a Terminal window by pressing command-V. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
255.255.255.255 broadcasthost
::1 localhost
Below that, you may see some other lines. The first 9 lines should be exactly as above, apart from differences in the blank space within lines. Otherwise you can't use this procedure—STOP and ask for guidance.
If the contents of the TextEdit window are as described, close it, then enter the following command in the Terminal window in the same way as before (by copy and paste):
sudo sed -i~ '10,$d' /etc/hosts
You may be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. Quit Terminal.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
That will fix the hosts file. There is now a copy of the old hosts file with the name "hosts~" in the same folder as "hosts". You can delete the copy if you wish. Don't delete the file named "hosts". -
Hey guys....
I just recently encountered a strange issue which no makes sense.
I have a 16GB Black iPhone 3GS **LOCKED** to Rogers, never been unlocked, was given to me by Apple as a replacement.
It was on 4.3.3 and was getting a little slow so I decided to do an update + restore to 4.3.5.
After the restore and update, iTunes gave me the "the SIM card inserted into this phone does not appear to be supported" error... so I can't get past the emergency call screen.
I tried restoring in DFU and with diff comps PLUS diff Rogers SIM cards and no dice.
Also tried restoring with/without SIM card in during restore.
Any ideas on how this has happened and how I can fix it?
It's no longer under warranty so I know I can't go to the Genius Bar, even though technically it's their faulty phone...I would still take it to the Genius Bar and see what they say. Worst case scenario, since it's out of warranty, they'll offer you an out of warranty exchange, which will roughly be 200 Canadian dollars.
-
My Ipod touch 2nd generation has been freezing today. We have updated, restored etc and now it will not play any music - as in no sound coming from it. It looks as if it is playing, but no sound comes out. It played ok 2 days ago. Any suggestions?
So, here is an update to my original question, in case anyone else has this issue. I spoke with a senior adviser at apple, who had me use the "devmgmt.msc" command in the search line of Windows 7; after expanding the USB controllers menu, she had me uninstall/delete the "apple mobile device driver" and then open "control panel" and "uninstall programs." Once the menu of programs was open, she had me highlight the program "apple mobile device controller", then repair it, and restart the computer. This fixed the issue and the iPod synced.
However, just one day ago, when I plugged in both the iPod, then the iPad (not at the same time), I get the message that "this library has already been synced to another iPod/iPad or other IOS device." It then asked if I wanted to set up as a new device or from restore of previous. That is wher I am right now; I am trying to get the same apple adviser again to discuss the case number. More to follow. -
I have updated my 13" MacBook Pro OS to Yosemite 10.10.3 two days ago. I immediately noticed the start up is slower than the previous version. It gives me a black screen for sometime in the beginning and then comes the apple logo. Is this a common issue?
Reset PRAM. http://support.apple.com/kb/PH18761
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Start up in Safe Mode. http://support.apple.com/en-us/HT1564
Best. -
I'm completely up to date, I've restarted my pc and my phone several times. Is this intentional? Is apple trying to hide the device so it forces you to go through itunes and icloud?
Photostream has NEVER worked for me anyway and even if it did I want to see my device on my computer. My 16gb 4s has been 'backing up' for over an hour now. I can no longer access my phone photo folders through my computer, my phone does not even appear as a device anymore. It charges and itunes starts right up though. Prior to this last update it worked fine.
I don't want to be forced into using icloud or itunes to access my data. Is this yet another glitch or is it intentional?
I texted my IT friend hoping for a quick fix and he texts back "As you know I support 30 iphones, this week has been a nightmare, I feel your pain and don't have an answer."
I've seen a lot of similar posts when googling this issue but no one from apple support has addressed this, the only 'solutions' are 'reinstall icloud' or something like that. F*** icloud, which I deleted anyway. I want to access my phone through my computer as I was doing before.
All my drivers are up to date on my pc.@ Peter: So this is apple supports way of saying 'we have no clue' or 'yes infact we are attempting to force you to use itunes as the sole way of transferring your data'?
Since you apparently can't figure out the issue by reading my first post I will lay it out very simply:
Ever since this last iTunes update (just this week) my Win 7 64 bit computer will not 'see' my 4s iPhone, but iTunes will. Prior to this I could go to 'My Computer' and see my phone, I could then open and copy any photos or videos out of it to my computer in 1/1000th of the time it took to sync with iTunes.
Now, suddenly I can't. Restarting my phone and my computer several times has not resolved this issue.
1) I'd like a solution if there is one
2) If there isn't one I'd like to know if this is something apple has done intentionally
3) If you're reading this and do not have a solution or an answer to this issue, please don't call me liar or complain that I'm ranting.
Maybe you are looking for
-
I built a new BW system with BI-Content 7.04. When activate BI content, it usually got a runtime out error. I has changed parameter: icm/conn_timeout value I read lots of document about performance, but too much information. So anybody can tell me w
-
dear team, i have been working on migrating my DB to ASM and while i was configuring ASM i got the following issues. 1- when i have to prepair the disk i used fdisk tool to make the filesystem table and then save the configuration for each disk. "do
-
Hello Experts, I would like to assign some documentation directly in the system for my BW structures (ODS, Cube, IObjcets TR, UR .). I found out then each of these objects can have documents (Ctrl + Shift + F4). Great! Because I want to have some re
-
How to add key figuers before chracteristic
Hi all, i would like to now if it is possible to add key figuers before chracteristics in a report. The report look like this (CH - characteristic, KF - key figure): CH1 CH2 CH3 CH4 CH5 KF1 KF2 KF3 KF4 KF5 but it should look like this: CH1 CH2 KF1 KF
-
Transferring suite to new computer
Hi , I would appreciate some help to transfer my adobe creative suite licence to a new computer. How would I go about doing this? Thankyou