Not a slide show, but a group of photos lined up and scrolling

I want to take about 60 photos and line them up, and have
them scroll horizontally. Is there an easy way to do this? Id also
like for the user to be able to put their mouse over the pictures
as they scroll and stop the scrolling. Also, Id like for the
picture they mouse over to expand.
Any help would be appreciated.

There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Similar Messages

  • HT204150 My contacts and groups are not duplicated in iCloud but my groups are duplicated on iPhone and iPad. Any ideas on how to remove duplicate groups or why they are duplicating?

    My contacts and groups are not duplicated in iCloud but my groups are duplicated on iPhone and iPad. Any ideas on how to remove duplicate groups or why they are duplicating?

    Welcome to the Apple Community.
    Check that you don't have more than one account in your contacts, such as 'iCloud' and 'On My Phone'.

  • I made a slide show for friend of our photos with music and saved it to iTunes - how to share it with her?

    Made a slide show on macbook pro of the two of us, saved it, then exported it to my iTunes. So how do I now share this with her. None of this stuff is purchased, just photos I have taken over thirty years....????Any ideas, greatly appreciated.
    thanks,
    Belinda
    Message was edited by: belindafromsaint helena

    All the music plays. Literally took it off of my old hard drive I used to sync from and put it on my new computer. It all works. I don't know why it wouldn't work or why it would sync all f'ed up.

  • I am trying to create a slide show but QT Pro won't open now

    I am trying to create a slide show (Time Lapse Movie) from thousands of photographs and was told to buy QT Pro. After downloading QT 7 and QT Pro yesterday, the program would not operate correctly, although I was able to work with it somewhat. Today it started out Ok but then back to same as yesterday (will not open). Any advice would be greatly appreciated.
    Bob

    Export the slideshow out of iPhoto as a QT movie file via the Export button in the lower toolbar.  Select Size = Medium or Large.
    Open iDVD, select a theme and drag the exported QT movie file into the open iDVD window being careful to avoid any drop zones.
    Follow this workflow to help assure the best quality video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    If iDVD was not preinstalled on your Mac you'll have to obtain it by purchasing a copy of the iLife 09 disk from a 3rd party retailer like Amazon.com: ilife 09: Software or eBay.com.  Why, because iDVD (and iWeb) was discontinued by Apple over a year ago. 
    Why iLife 09 instead of 11?
    If you have to purchase an iLife disc in order to obtain the iDVD application remember that the iLife 11 disc only provides  themes from iDVD 5-7.  The Software Update no longer installs the earlier themes when starting from the iLIfe 11 disk nor do any of the iDVD 7 updaters available from the Apple Downloads website contain them. 
    Currently the only sure fire way to get all themes is to start with the iLife 09 disc:
    This shows the iDVD contents in the iLife 09 disc via Pacifist:
    You then can upgrade from iDVD 7.0.3 to iDVD 7.1.2 via the updaters at the Apple Downloads webpage.
    NOTE:  If you're running iPhoto 9.5 the export options will be different.
    OT

  • Hi, I made a slide show with music from 81 photos I downloaded from my camera.  I would like to burn these to a blank DVD, but there appears to be no utility for export to a DVD for slide shows.  Help.  I want to distribute DVD copies to classmates

    Hi, I made a slide show with music from 81 photos I downloaded to iphoto from my camera.  I would like to burn the slide show to DVD, but can't make this happen.  How do I go about doing this? 

    If the DVD is to play on a DVD Player, then Share -> Send to iDVD as iDVD is the only app that creates the correct file structure and format for this purpose.
    If the DVD is just to hold the file, then Export to the desktop and burn with the Finder.
    Regards
    TD

  • I am using Iphoto 6 to create a slide show but my music stops when it supposed to loop?

    I am using Iphoto 6 to create a slide show but my music stops when it supposed to loop?

    As a Test:
    Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • I am making a slide show, but when importing pic from organizer, they are fuzzy??

    I am making a slide show, but when importing pic from organizer, they are fuzzy??

    You need this forum: Community: Premiere Elements | Adobe Community
    You are in the Premiere Pro forum now.

  • Deleting Photos in slide show modus trashes the wrong photos

    In my Library are 13500 photos. Some good, many not so good. I find it comfortable to delete some of them by browsing a slide show, but when looking into the trash I was very surprised that I found photos that I for sure not deleted even not viewed...
    one example: let´s say I want to delete photo "01.jpg" and photo "girl45-1" (it depends not on the names).... and I delete them by pressing the "delete-key" on the keyboard...
    In the trash bin in iPhoto I found: photo "01.jpg and "car.jpg" (just an example)
    This behavior is identical on both Macs.
    DualCore 2,0 G5 / MacBook Black 2.0   Mac OS X (10.4.3)  

    The only way to remove Scene Menu button from Disc Menus is to physically remove it from the template by editing it (They're PSD files) in Photoshop Elements.
    As for photos, DO NOT use photos from that 7.2 megapixel camera at full resolution, niagara. It's a sure recipe for disaster. RAther, per the FAQs at the top of this forum, rez those photos all down to no larger than 1000x750 pixels in size.
    http://www.adobeforums.com/webx/.3bb8822c
    That done, you can get your photos to fill your screen one of two ways:
    a) Leave the Default to Frame Size option checked in your preferences. The only case in which this won't work is if you're using 4:3 photos in a 16:9 widescreen project.
    b) If this is the case, go to Edit/Preferences and uncheck Default to Frame Size BEFORE you import that photos into your project. (It won't work if you do it after.) Then, after placing each photo on your timeline, right-click on each, select Show Properties and, in Properties, open Motion and set Scale to 85%. Note that, because your photos and the widescreen have different aspect ratios, you will lose some of the vertical off the tops and bottoms of your photos.
    There are many more ways to do it -- but it all depends on what you're trying to accomplish.

  • The enter key is not working in firefox but it has working fine in chrome and IE so please help me to rid out from this.

    The enter key is not working in firefox but it has working fine in chrome and IE so please help me to rid out from this.

    Hello gokulaan, '''try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • When I use send to trash the file does not go into trash but brings up a notice to delete and if I do this it is gone forever?

    when i use send to trash it does not go into trash but brings up a message to delete and if I do it is gone forever?
    is there a cure for this?

    Have a look here: https://discussions.apple.com/message/11291053?messageID=11291053&
    Thomas A Reed's tip seems to fix the problem.

  • I am using IDVD to make slide shows.  The pictures are clear and of good quality.  When I burn the slide show to a disk, the pictures are blurry and of poor quality.  Is there a setting for quality of picture in burning a disk?

    I am using IDVD to make slide shows.  The pictures are clear and of high quality when viewed on my computer.  When I burn the slide show to a disk, the pictures are blury and of poor quality.  Is there a setting adjustment to correct this problem?

    I would re-post in the iDVD forum.  You are likely to get a faster answer there.  Good luck.

  • Preview slide show-but not full screen?

    Seems to me I recall seeing an option to NOT preview the slideshow full screen. But can't find it now. I would like to view the slide show while keeping Pages on screen so I can take notes. Is there any way to do that?
    Thanks.

    I had gathered that, so am I to assume that the answer to my original question is no; ''"Is there still a way to maximise the screen without it going into full screen mode?"''

  • I made a slide show with music and random transitions in iPhoto.  I can't burn it to a DVD.  The burn button in iPhoto is not highlighted, and when I exported the slide show to iDVD, it lost the random transistions, and the disk won't play in DVD player.

    Two problems:  1. My iphoto slide show loses its random transitions when I export it to iDVD.
    2. When I then burn it to a disk, the disk will not play in a DVD player, but only on my MAC.
    Any ideas?

    The random transitions can only be random when played in iPhoto.
    If you are in the slideshow mode and use the Share ➙ iDVD menu option a quictime movie will be created of the slideshow with the first random set of transitions and imported into iDVD.  The transitions, however,  will be fixed permanently and will not be changed again.
    There is no way to get any sort of random behavior in an iDVD.  When it's burned to disk it's locked permanently.
    OT

  • IPhoto 9 video playback shuttery in slide show but ok otherwise.

    Hi,
    I'm using iPhoto 09 (version 8.1.2) on a brand new MacBook pro 2.66ghz running Snow Leapord 10.6.4. In my iPhoto events I have photos and videos imported from my Samsung pl150.
    If I play one of the videos in iPhoto by just clicking on it launches Qucktime and plays the video fine. However, if I run a slide show of the same event containing the same video it is stuttery.
    Anyone any ideas how I can get videos to show in slideshow without stuttering?

    That's correct. See my first post in this thread.
    iPhoto '11 uses the Quicktime X frameworks provided by Snow Leopard, so the GPU does the decoding. iPhoto '09 does not, it came out before Snow Leopard so didn't have that option.
    This is why you must have Snow Leopard to install iLife '11. I now experience nice smooth playback during slideshows & also directly inside iPhoto (it used to open in the external Quicktime X player when double clicked).
    I highly recommend anyone with a 9400m gpu or later & who works with HD h.264 get iLife '11.
    According to the link below, nearly all Macs with Snow Leopard will see an improvement during HD playback. But its the ones with 9400m and later GPUs that get the best increase.
    http://developer.apple.com/technologies/mac/snowleopard/quicktimex.html

  • Date created in IPTC not in slide show

    Hi,
    Currently I am processing analoge pictures in Lightroom 3.6.
    When adding IPTC data to a slide show, I am able to add almost every item, except "Date created". That does not apear in the ABC list.
    Does somebody have a clue how to fix that?
    Thanks, Henk

    Let's tease apart the issues, because they're messy:
    The ABC "Date" field in the LR slideshow shows the capture time of the photo, as recorded in the LR catalog.
    When you first import a photo into a catalog, LR reads the catalog capture time from the fields EXIF:DateTimeOriginal, XMP:DateTimeOriginal, or XMP:DateCreated.  (According to the standard, it should also get it from IPTC:DateCreated, but it doesn't, which is a bug.)
    You change the catalog capture time using the Metadata > Edit Capture Time command.  Using this command will change the metadata fields EXIF:DateTimeOriginal, XMP:DateCreated, and IPTC:DateCreated.   Changing the IPTC Date Created field in LR's Metadata panel does not change the catalog capture time.
    So, if you have a lot of photos in your catalog with just the IPTC:DateCreated field set and not EXIF:DateTimeOriginal or XMP:DateCreated set, and you want the LR catalog capture time to be set to the value of IPTC:DateCreated so you can show the capture time in slideshows, you have a couple of options:
    - Use the Metadata > Edit Capture Time to change each photo individually.
    - Write all the metadata from the catalog back to the photos using Metadata > Save Metadata To File, then use the free Exiftool to copy IPTC:DateCreated to XMP:DateCreated.  (Exiftool has a fairly steep learning curve unless you're comfortable with command-line tools.)  Then reread all of the photos' metadata back into the catalog using Metadata > Read Metadata From File.  (I don't know of a plugin that will do this -- the Search Replace Transfer plugin can't do it.)

Maybe you are looking for

  • A55M-P33 - Win 7 Pro x64 - 8.00GB (3.49 GB usable)

    Hello! After a few hours of google searching i've decided to ask for help. Search of this forum did yeald one post similar to mine: https://forum-en.msi.com/index.php?topic=161010.msg1180013 But there was no solution. Problem is very weird. Win 7 Pro

  • What are the drawbacks of creating execute queues

    Hi thread Gurus What are the drawbacks of using execute queues. I understand that if queues are not used they stay idle but on solaris the SunOS scheduler will only give active threads CPU time. what ar the other resources being wasted in the process

  • Need Pre_requisites to install Solution Manager in Solaries 9 and Oracle 10

    Hi Administrators, In my project, we have planned to implement Solution Manager 7.0 in O/S Solaries 9 and Database Oracle 10.2. We are implementing this Solution Manager in already existing SAP server. We have server like TSAPNGN, In this server alre

  • General Question about RMI

    Okay here is what I am trying to do: I work for a small consulting firm and part of what we do is we process a tremendous amount of data using a suite of tools written in C/C++. We have a Java application which is really just a script (Written in sta

  • Darwine on ppc

    hi... I lately found out about a software named "Darwine" or "WineBottle" (I think the latter is how it is called now) that apparently allows windows apps to run in Macs. Apparently it works only with Intel based Macs. Since I have an iBook G4 with M