Not a valid Network Installation Point

Post Author: BGardner
CA Forum: General
This one is obscure but I hope that someone will recognize it. It doesn't appear on any searches.
Crystal 8.5 was installed onto a client's server (used for custom reports in an accounting application). I was able to successfully run a Workstation installation to 2 or 3 PC's using P:\ as the Network Installation Point.
But now the Workstation install fails and returns the message "The directory P:\ is not a valid Network Installation Point - it does not contain the Crystal Reports network files."
Notes:
The cause of the problem is that the server was replaced by a newer one
The new server has the same name and sharenames & drive mappings are identical
All files were copied from the old server to the new one
Everything else runs correctly, including CR on workstations previously installed
I reinstalled CR but with the same results
Server O/S is Windows 2003 on both servers.
Clearly there is something missing (or something that shouldn't be there!). Or could it somehow be a rights issue?
I'm stymied so all suggestions are welcome! Thank you.

You don't specify the version number of 2.6. Is that Solaris 2.6 HW 5/98? Any earlier version of Solaris 2.6 will most likely not work.

Similar Messages

HT201372 I am trying to create a bootable USB drive for Yosemite and the terminal is telling me /Volumes/Untitled is not a valid volume mount point. HELP!!!

I erased the USB drive and partitioned it as directed in order to create a bootable drive. When I type in the sudo command in the terminal, it is telling me that /Volumes/Untitled is not a valid volume mount point. HELP!!!

FYI
my process just completed: here is what I see when it is done... (the first you saw in my earlier post. It took about 15-20 minutes.
To continue we need to erase the disk at /Volumes/Recovery.
If you wish to continue type (Y) then press return: y
Erasing Disk: 0%... 10%... 20%... 30%...100%...
Copying installer files to disk...
Copy complete.
Making disk bootable...
Copying boot files...
Copy complete.
Done.

I get /Volumes/Untitled is not a valid volume mount point when I try to use teminal to make bootable usb stick

I get /Volumes/Untitled is not a valid volume mount point when I try to use teminal to make bootable usb stick. Why and what do I do to fix this. Very frustrating. Thanks for any help. Btw, I went through all the steps properly more than once to fomat and partition etc.
John

FYI
my process just completed: here is what I see when it is done... (the first you saw in my earlier post. It took about 15-20 minutes.
To continue we need to erase the disk at /Volumes/Recovery.
If you wish to continue type (Y) then press return: y
Erasing Disk: 0%... 10%... 20%... 30%...100%...
Copying installer files to disk...
Copy complete.
Making disk bootable...
Copying boot files...
Copy complete.
Done.

HT5030 whem installing itunes i get this message "this installation package could not be opened. Verifiy that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package"

whem installing itunes on my mums new computer which is windows 7 i get this message everytime "this installation package could not be opened. Verifiy that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package"

Let's check your Windows system.
1. Have you done all the important windows updates and service Packs on your system. If not do it now. START button, type in Windows Update and ENTER. Select 'CHECK FOR UPDATES'
2. Let's check your Windows system files for possible file corruption
SCAN and repair possible Windows system file corruption:
Go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair any files.
3. Check your system for possible Malware. But you have to do it in WIndows Safe Mode.
Start your computer in "Safe mode with networking", go to this link download a free version of Malwarebyte.
http://www.malwarebytes.org/products/malwarebytes_free
Install and perform update immediately, then do a full SCAN. Remove malware if it indeed finds any. Restart computer to regular windows to let Malwarebyte complete the removal.
To start your computer in safe mode
Press and hold the F8 key as your computer starts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you'll need to try again by waiting until the Windows logon prompt appears, and then shutting down and restarting your computer.
On the Advanced Boot Options screen, use the arrow keys to highlight the "safe mode with networking" option, and then press Enter. Log on to your computer with a user account that has administrator rights.
When your computer is in safe mode, you'll see the words Safe Mode in the corners of your screen. To exit safe mode, restart your computer and let Windows start normally.

This installation package could not be opened. Verify that the package exists and that you can access it, or contact the applikcation vendor to verify that this is a valid Windows Installer package." How to fix this installation error?

Does anyone know, how to fix ' This installation package could not be opened. Verify that the package exists and that you can access it, or contact the applikcation vendor to verify that this is a valid Windows Installer package." ?

At what point in the process are you getting this message? Have you tried downloading a fresh copy of the iTunes setup file from http://www.apple.com/itunes/download/ ?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

I cannot upgrade itunes 10.1 or higher on Windows xp. I get the file 'C:\...AppleSoftwareUpdate\' is not a valid installation pkg for the product iTunes. Try to find the installation pkg in a folder for which u can intsall iTunes. Can't find folder. Now ?

This is getting frustrating, it won't let me upgrade. I get to a certain point where it tells me iTunes.msi is not a valid installation package for the product.
What do I need to do? I have bought a new Ipod & I have to update before I can download to my Ipod.

Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Installation of Office Pro 2007 - Error is not a valid Win 32 application

I am using MS office Pro trial on widows 7 operating program and have just brought the full retail version.
When I insert the installation disc the program will not install, after about 5 minutes I get a message"
*D:\is not a valid Win 32 application.*
The retail version I brought is certified for windows vista, I loaded on my PC which is running XP and the disc worked as should.( I did not go through with the install on the PC, I just tested the disc)
I copied onto a external hard drive and tried to load it from there. No go!
I even used my product key code on the trial program but it rejected it!
Any ideas out there would be most helpful

This may get round the problem if its related to "old" progs on your install disc. I used this method when installing Office 2007 with a packaging date of March 2007 in case it saved lots of product update downloads - worked perfectly but I still had 20+ updates downloaded after install.
If you have a reasonable broadband speed then [dowload the Office 2007 trial|http://us20.trymicrosoftoffice.com/default.aspx] . MS email and display a trial product key but when the download starts to run don't use this key but your own "full" version product key
Just re read your post - you are going from trial to full so what you do is follow MS instructions
Follow these steps to activate the trial:
Follow these steps to convert the trial:
You can convert from the trial software to a full-version either before or after your trial period ends.
Before the trial period ends:
You will start receiving expiration reminder messages indicating the date when the trial will expire. At this point, you can convert to the full product in two ways:
1. In any of the expiration reminder messages, click Convert, and then follow the steps in the conversion process, below.
2. At any time during the trial period (or even after the trial has expired), you can open any of the Microsoft Office System products, and in the Help menu: click "Activate your software".
After the trial period expires:
The software goes into reduced functionality mode. Some of the limitations of reduced functionality mode include the following:
- You can not create any new files.
- You can view existing files, but you can not modify them.
- You can print files, but you can not save them.

Error message when installing iTunes on my PC: This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows installer package

Error message when trying to install iTunes on my Pc:
Using Windows 7, had to replace hard drive. HELP!!
This installation package could not be
opened. Verify that the package exists
and that you can access it, or contact
the application vendor to verify that
this is a valid Windows installer package

Hello JAH1961,
I recommend following the steps in the article below when getting an error message trying to install iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thank you for using Apple Support Communities.
Best,
Sheila M.

This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this a valid Windows Installer package"

I'm unable to install Itunes on my new PC. I'm logged in as the administrator And have deleted my browsing history. This is the error I get, ITunes installation error- “This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this a valid Windows Installer package”... Any suggestions how to fix?

Hi
Try the following:
Uninstall iTunes and Quicktime
Reboot
in the task tray right click the quicktime icon and click exit.
navigate to the folder in program files and remove the quicktime directory and all its files.
Reboot.
Now try install iTunes and quicktime and it should work
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

I am trying to download iTunes to my Sony PC, but "This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer Package."

mI am trying to download iTunes to my Sony PC, but I keep getting the following error after initial download attempt:
"This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer Package."
I have Windows 7 Home Premium, Service Pack 1.
Any help is greatly appreciated.

Hi gump68,
Thanks for visiting Apple Support Communities.
You may find the steps in this article helpful if iTunes is not installing on your PC:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
All the best,
Jeremy

When i try to instal itunes on pc i get this message. This installation pack could not be opened. Verify that package exists and that you can access it or contact application vendor to verify that this is a valid windows installation pack. HELP

when i try to instal itunes on pc i get this message. This installation pack could not be opened. Verify that package exists and that you can access it or contact application vendor to verify that this is a valid windows installation pack. PLEASE HELP

Hello annesmith1954,
Thank you for using Apple Support Communities.
You can use the information in the following article to troubleshoot your installation issues with installing iTunes on your PC.
"Could not open key" message when installing iTunes or Apple components for Windows
Regards,
Jeff D.

This installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package

this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package how can i istaller itunes in my laptop windows 7 64 bits

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

While installing itunes i am getting error "this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package"

While installing itunes i am getting error "this installation package could not be opened.verify that the package exists and that you can access it,or contact the appliacation vendor to verify that this is a valid windows installer package"

I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

I-tunes won't download onto Windows XP. Error message 'this application package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this a a valid window Installation package'.

How do you download i-tunes onto Windows XP when error message occurs, 'This application pack could not be opened. Verify that hte package exists and that you can access it, or contact the application vendor to verify that this is a valid window installation package'.

I wish I knew because i'm having the same problem. As soon as I find the answer I will post.

When i try to install iTunes onto my new computer, it says ""installation pkg could not be opened. Verify that this pkg exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer pkg."

When I try to install iTunes onto my new computer, it says "This installation package could not be opened. Verify that this package exists and that you can access it or contact the application vendor to verify to verify that this is a valid Windows Installer package." I can save iTunes onto my computer, but when I click run, this is the message that appears. How do I get this thing installed?

Hello annesmith1954,
Thank you for using Apple Support Communities.
You can use the information in the following article to troubleshoot your installation issues with installing iTunes on your PC.
"Could not open key" message when installing iTunes or Apple components for Windows
Regards,
Jeff D.

Not a valid Network Installation Point

Similar Messages

Maybe you are looking for