Not able pair my nokia 5230 with bluetooth headset

I am trying to pair jabra bluetooh headset with my nokia 5230, but i am not able to pair it..
Can anyone help me with this please...?

Hello Jamessm,
I would try the troubleshooting steps in the following article about Bluetooth and iOS devices.
iOS: Third-party Bluetooth headsets, headphones, and keyboards
http://support.apple.com/kb/ht1664
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Similar Messages

  • Using Nokia 6680 with Bluetooth Headset BH-601

    Hi all,
    I have Bluetooth headset model BH-601 and need to use it with my 6680 mobile.
    I was able to pair the headset with the mobile but I couldn't listen to music as stereo, I was able to listen to music on the left speaker of the headset with very low quality as I was listening using normal headphone.
    I tried to use the headset with my PC and it worked perfectly.
    Is there a way to configure the mobile to use the BH-601 as stereo headset?
    Is there a compatible music player.
    Thank you,
    Hadi

    The 6680 does not have the bluetooth profile necessary for listening to music in stereo on a bluetooth headset. As far as I am aware there is no way to get this profile onto the phone.
    The only Nokia phones that have this profile is the 8800 and possibly the 7390 which I dont think is even released yet.

  • Not able to connect Nokia 5233 with laptop using b...

    Hi Experts,
    I purchased Nokia 5233 couple of months back. Since then i am facing problem in connecting the phone with any laptop using bluetooth. It gets connected to other phones via bluetooth very easily, but doenot get connected with any laptop.
    Whenever I try to search the phone, it appears as active device. When I try to connect to phone the message appears "connection failure". It happens the same with every laptop. Is there anything which i can do to correct this problem?

    try the post above yours.
    Using the search function and actually reading threads will reveal more that you may think..
    Click on the blue Star Icon below if my advice has helped you or press the 'Accept As Solution' link if I solved your problem..

  • Not able to make any call with my lumia 710

    Not able to make any call with my lumia 710 though other then call everything is working fine. I chacked my SIM in other phone, i there phone i can make calls. Whats wrong with my phone?

    hi
    i am using nokia lumia since last 6 months. i am having aitel connection. till few days back i was able to make phone calls however now phone calls are immediately getting ended.  i m able to send sms, receive calls and use intenel..problem presisits only with receiving call..
    suggest me a way out..plz..

  • I'm not able to access goolge docs with the blackberry browser (it worked fine till a few weeks ago)

    I'm not able to access google docs with the blackberry browser (it worked fine till a few weeks ago)
    seems that this issue happens to a lot of people
    is google going head to head with Blackberry ? or is this just a bug ? 
    Message Edited by avolcoff on 08-27-2009 01:06 AM

    Welcme to the cmmunity supprt frums
    Nurse-Berry
    Follow NurseBerry08 on Twitter

  • [HP Expert Day] "You are not able to restore this system with the media"

    Welcome to HP Experts day! 
    I've got a long-standing problem since last year. Let's see if you can solve this! 
     I'll get straight to the point : 
    I am unable to perform recovery on my system. This is the error message : 
    It's a USB recovery media created with the HP recovery media utility on the same laptop. Tested to work correctly before I sent it for RMA on my SSD. It initially was running on a micron SSD. When I got it back, it was a samsung SSD instead, according to some benchmark results. 
    Laptop : HP Envy Spectre XT 13-2018TU
    P.S I've already opened another thread on this last year. 
    http://h30434.www3.hp.com/t5/Notebook-Recovery/Unable-to-boot-from-USB-recovery-media/m-p/2197929#M1... 
    But they were stumped. 

    I had this exact same issue on a Spectre XT Pro Ultrabook. 
    The original SSD failed and I was sent a replacement, was fortunate enough to be able to create a Recovery USB stick using the wizard in Windows. When booting from USB I received the message "You are not able to restore this system with the media".
    SOLUTION: You must NOT use the Recovery USB stick in any USB3.0 port (labelled SS). Using another USB port prevented this exact error message from appearing and I was able to complete the system restore process.
    I hope this helps someone, I signed up and posted here especially for this reason!

  • Not able to import the article with sidecar.xml

    Hi,
    With the new DPS version (ver. 18), we are not able to import the article with sidecar.xml. Could you please check and suggest the solution for the same.
    With Regards,
    Anil Yadav

    I read that your sidecar needs the author-value to be working.
    —Johannes
    (mobil gesendet)
    Am 30.01.2012 07:54 schrieb "Anil Yadav" <[email protected]>:
       not able to import the article with sidecar.xml  created by Anil Yadav<http://forums.adobe.com/people/Anil+Yadav>in
    Digital Publishing Suite - View the full discussion<http://forums.adobe.com/message/4173103#4173103>

  • Hi, i installed d latest version of itunes on my pc, but still am not able to connect my iPhone with that...

    hi, i installed the latest version of itune on my pc, but still i am not able to connect my iPhone with my pc....

    The top window says Accessing iTunes Store and the animation underneath will
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • I am Using Apple iPhone 4g 32gb and i have Updated to iOS 6.0 but in Maps i am not able to change the angle with two finger why so ?

    I am Using Apple iPhone 4g 32gb and i have Updated to iOS 6.0 but in Maps i am not able to change the angle with two finger why so ? I have also restored it but not getting

    I have an iPhone 4 also.  If you are referring to the flyover view, its unavailble for the iPhone4.  If you want to rotate the map, hold two fingers on the map for 2-3 seconds and rotate them in opposite directions.
    Hope this helps

  • HT1386 Since 8th May , I am not able to synchronize my iPhone with iTunes. Have tried removing previous back up data , removed all photos and videos on iPhone , switched  on and of and  reset iPhone  a million times , restarted my Mac a thousand times :(

    Since 8th May , after updating the iphone software to 5.1.1  I am not able to synchronize my iPhone with iTunes. Have tried removing previous back up datas , removed all photos and videos on iPhone , switched  on and of and  reset iPhone  a million times , restarted my Mac a thousand times Please Help !!!

    I have tried both options .. back up on this computer and also back up on icloud.
    The backingup is fine .. there is no problem .. even synchronizing songs , applications , calender , mail accounts is fine .. only the contacs are not synchronizing. The itune goes on and on .. showing synchronizing contacs .. but nothing happens. When i uncheck contacts synchronisation .. everything works fine . I have also reorganized my address book . but it does not help

  • Not able to open any doc with adobe reader XI. fatal error, acrobat failed to its core DLL load

    not able to open any doc with adobe reader XI. fatal error, acrobat failed to its core DLL load

    See http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

  • HT1420 i am not able to authorised my mac with iPad

    i am not able to authorised my mac with ipad

    What happens when you try to authorise your account on your computer's iTunes ? You should be able to do so via the Store drop-down menu at the top of iTunes :
    If your iPad hasn't been synced to that computer before then you may also find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141

  • Not able to find Portal Combo with Stoplight in top right corner

    We are running on EP7.0 SP8. VC is also in SP8. After installing, I am not able to see PORTAL combo with the stoplight in the top right corner of VC. Any Help ?
    Regards,
    Murali

    Hi
    Actaully, in this version, I believe that we would not be getting the PORTAL url at top right corner. In my Quality server, it works fine.
    In my Development Server, when i click on 'Find Data' icon, it throws me the following error.
    0001> Welcome to Visual Composer
    0002> Portal Connector: fetch error: Bad or missing XML object
    0003> Parse of result error :Bad or missing XML object
    Any Help.
    Regards,
    Murali.

  • 2nd Try: Please Help : UIX : Not able to use messageFileUpload along with m

    UIX : Not able to use messageFileUpload along with messageChoice
    I used messageFileUpload UIX element and associated upload button to fileupload servlet. This servlet just captures the file and put it in desired location. This works just fine.
    My client wanted me to add another choice filed on UI. I used messageChoice. I named the field as fileType. All the options have name and value populated but when I submit the form servlet is reading fileType as NULL.
    I am not sure what's happening. Please let me know how should I send file handle as well fileType ?
    Thanks,
    Linda

    What exactly are you expecting this to do for you?
    Forall is designed to process batches of DML to prevent context switching from PL/SQL to SQL.
    Has no relevance for what you are trying to do.
    If you don't want to call the procedure multiple times, you need to rewrite it to passs the cursor to the function, then have the function process all the records.
    Carl

  • HT3541 I'm not able to complete my billing with my credit card is there any other options

    I'm not able to complete my billing with my credit card is there any other options

    See
    Why can’t I select None when I edit my Apple ID payment information?
    and
    Creating an iTunes Store, App Store, iBooks Store, and Mac App Store account without a credit card
    Step 3 is important, no matter whether you do this on a Mac or an iPad / iPhone:
    Important: Before proceeding to the next step, you must download and install a free application. ...
    Important: Before proceeding to the next step, you must download and install the free application by tapping Free followed by tapping Install App. …
    First you must download a free app from the App Store. When you are asked to sign in with your Apple ID, select "Create new account". Accept the terms and conditions checkbox, then click Continue. After you enter all the requested personal data, click Continue.
    When you are asked to select a payment method, select "None". 
    That's all there is to it.

Maybe you are looking for

  • AX X 2 - second not working - trying to extend network

    I have a AX connected to amy router and this works fine connecting to the internet. I also had another AX extending my network upstairs (+ printer connected to it) and they both worked fine. Recently my internet access speed has been not great so I r

  • Games (as a response to my last forum)

    i found a page on itunes with good games that work on the ipod nano. the page says it works on 3G nano, 4G nano, and 5G nano, but whenever i look at the system requirements for a good game, it says that it works on 3G nano, 4G nano, and 5G classic iP

  • Flight Instance table

    I am developing a Web-based GUI for a flight reservation system. The following select statement is used to find the selected flights on a given date: select distinct flight_no, origin, dept_time, destination, arri_time, flight_date from flight_instan

  • Why won't my Load Earlier Messages button appear on my iphone5

    Why won't the Load  Earlier Messages button appear anymore on my iphone5

  • Does preview open native raw files?

    I was hoping one of the techies could answer a question for me. I can open my Nikon .nef files in preview. But, is Preview really opeining the raw file itself, of the jpg that is bundled inside of it (the one used to display on the back of the camera