Not able save printer defaults as the scale is always 150%

All my printers default to a scale of 150%. Whatever i do will not save and changes any printer settings either the defaults or custom settings. Can anyone help me please.

ribit04 wrote:
Yes, I did go to /Library/Preferences but the file does not exist. I also looked through the whole Library folder for anything that may relate to the Printer, my Lexmark printer or Safari.
>>As Pahu says, make sure you are looking in ~/Library/Preferences. The printing files have the com.apple.print prefix.
When I opened a doscument in Preview it defaulted to 97%. When I make changes and save as a preset the changes are not saved. When I go to use the saved preset it has the system default values not my choices.
>>Scale is a page format attribute and the saved setting will not be used while printing. This has always been true, the same as Orientation and Paper Size.
TextEdit does have the same selection layout.
>>What happens if, in TextEdit, you select Page Setup, set the scale to 100% and then select Settings->Save as Default? Does 100% appear in the Scalle field in the other apps?
The file changed when you do this is com.apple.print.PrintingPrefs.
>>Apps implement scale differently, and some don't implement it at all.
>>Hope this helps.

Similar Messages

Since upgrading to Mavericks, I'm not able to print most of the pdf files that I download. Any suggestions?

I have tried apple support (3 hours on phone), Adobe (1.5 hours on the phone) and Epson (I use the CX11N printer), another 1.5 hours and the proble still exists.
I have tgried unstalling Epson printer and reinstalling, using "print as an image" and all the other things that Adobe suggedts on their sight. I am also using Adobe Reader XI. Any suggestions?

Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print PDF's displayed in Safari, you may be able to print by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar may appear under the cursor. Click the printer icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
Safari ▹ Preferences... ▹ Security
and check the box marked
Allow Plug-ins
Then click
Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

I am not able to print anything from the internet through Firefox. I can print from Safari, documents, etc. Pleaes help!Please help

Starting this am I cannot print anything form the internet when using Firefox as my browser. I can print Word documents and when using Safari as my browser...just not with Firefox. I have contacted Epson and it is not a printer problem. I have contacted my IP and it is not them

See this: 
http://kb.mozillazine.org/Problems_printing_web_pages

On the Wall Street Journal website, I am not able to print out of the print format. Never had a problem before with this.

I click on the print icon under an article in the Wall Street Journal. A new window opens with the article in print format. When I print, I get blank paginated pages equaling the length of the article. On the top left hand corner of the page will appear the title of the article; on the top right hand corner will appear the web address of the article; on the bottom left hand corner will appear the pagination; and on the bottom right hand corner will be the date and time of the printing. This is just how any article would print; the only difference being that I'm not getting the content of the article printed.
This has only started a couple of days ago. I do not have this issue with any other publication, yet this problem doesn't exist with other browsers.

I don't have a WSJ account to test... Here is some general advice:
When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
This will open a window listing the site's cookies, which you can remove individually.
Then try reloading the page and logging back in. Does that help?

Not able to Print Invoice thru Crystal Integration

Hi All,
Could anybody help me on the issue given below.
One of our client Issue while printing from crystal Integration in SAP Business One. I can able to view the crystal report through Crystal Integration but i am unable to print the document.No Error is getting displayed .If i am printing from PLD it's working fine .After exporting to PDF from crytal integration i can able to Print but not able to print directly from the crystal Integration.
Thanks,
Vishwanath

Vishwanath,
Please post your question in this forum ...
Reporting and Printing
Eddy

Not able to Print the report

Hello All,I am not able to print the report. When i click on the icon a blank form opens up. Is there something i need to do to see the form with some details.Thanksram 

Hi Ram, Can you give me some more details around your issue? How exactly are you building the viewer? Are you using the JSP Page Wizard that comes with Crystal Reports for Eclipse? If so, then can you tell me what application server you are deploying to? All of these pieces may help narrow down the issue. Regards, Sean Johnson (CR4E Product Manager) <a href="http://www.eclipseplugincentral.com/Web_Links-index-req-ratelink-lid-639.html">Rate this plugin @ Eclipse Plugin Central</a>

I can only print the current page of downloaded pdf's. Not able to print "all". I'm using a Macbook air.

I can only print the current page of downloaded pdf's. Not able to print "all". I'm using a Macbook air.

it says "the document could not be printed". "There were no ages selected to print".
I selected "all". I always tried selecting pages "1-3".
The only choice that works is current page. Very strange.

Latest Lithroom 5.6 does not recognize my .cr2 raw file format and Windows 7 it asociates with my older raw plug in in Ps CS5.5. I am not able to change default program for .cr2 in the properties pannel...

Latest Lithroom 5.6 does not recognize my .cr2 raw file format and Windows 7 it asociates with my older raw plug in in Ps CS5.5. I am not able to change default program for .cr2 in the properties pannel...
every new released update of Lr from v 5.2 changed somethin in my Windows 7 Professional settings. I am stucked. Can somebody help me please? Many thanks. Andrej

Hi Jim,
yes after I imported my .cr2 raw files into new catalog it started to work. Windows 7 still does not recognize them but I can edit them as you said within the Lr5.6 and then export them into .psd or .dng files...as needed.
I bought Lr5 only because I got present - my new camera Cannon 70D and because my older Photoshop CS5.5 raw plugin does not recognize. cr2 files.
Many thanks for your help.
Andrej.

Not able to print double sided or into the mailbox of our "Canon Image Press C1" anymore

Maybe someone can help me.
Yesterday I noticed, that I am not able to print double sided or into the mailbox of our "Canon Image Press C1" anymore (InDesign Version 6.0.4).
At the end of january I printed double sided the last time and it worked.
Right now, I can choose "double print", but the system does not keep it. I tried with different documents already and it didn't work, so it can't be just that one file. Since everything works out of other programs like Adobe Acrobat or MS Word, it can not be printer bug; it's pretty much my impression that it must be a InDesign bug.
So if somebody has any idea .... please help :-(
Thank you in advance
red witch

Sorry that I forgot about the operating system, but I am new so you may forgive me about that ...
I am working with a PC. Last week I was working in a document and suddenly the side window did not show the sides anymore. Our IT department took a file from my collegues PC and copied it to my PC, after this the sides where shown again. Since my colleque has got the same basic problem, I think something went wrong on the installation. I am not the expert with this installation stuff.
Bye
red witch

I am not able to print or to do a print preview with firefox 5. The problem happens with my Xerox Laser printer and also with Bullzip PDF printer. All prints are white with the printer and empty with the PDF printer.

I have a Phaser 6280DN and Bullzip (PDF virtual printer). They work perfectly with firefox 4 and with other application on my notebook running Windows Vista. But I am not able to print with firefox 5. All prints are white or empty. My notebook is a Dell Vostro 1710 with 3GB RAM and 500GB HD.

LytKT wrote:
We called the internet company and from their end everything was working.
Your ISP can only determine that their equipment is responding to ping requests. They can determine nothing about your equipment or if theirs is communicating with it.
Disconnect the Ethernet cable that comes from their equipment and connect it directly to a computer instead of the Extreme. If you can load web pages, it means your Internet connection is working. If not, it's not.
Is your ISP supplying cable Internet? Sometimes it is necessary to reset your ISP's connection by disconnecting their coaxial cable that connects to their modem. Literally unscrew it and leave it detached for a minute or so, then screw it back in again and power up the modem. They call this a "full reset". I don't know how it differs from simply powering down the modem, but I have confirmed that on rare occasions doing this will reset a recalcitrant connection.
... however the internet bars are present on the desktop and also indicated I was connected to the internet.
The Wi-Fi icon "bars" show that a connection to a wireless network has been established. It conveys no information about an Internet connection that lies beyond your local network. Option-click that menu and select "Open Wireless Diagnostics..." Authenticate with your Admin name and password and click the Continue button. Some useful diagnostic information and suggestions will result.

Not able to print reader file

When I convert MS Word files to Adobe Reader files, some people are not able to print them. Some of the content prints for instance, but some is missing. The graphics may print, but the text is missing.
Any ideas?
Thanks,
Brian

Thanks for the response Michael,
Here is a file I converted from Word to a PDF that will only print the graphics.
I am using Word 2007 and Adobe Reader 9 Pro. I have the CS4 suite. When I save, I am using the following parameters:
Convert Document Information
Enable Accessibility and Reflow with tagged Adobe PDF
Create Bookmarks
Convert Word Headings to Bookmarks
I should add that changing and eliminating these parameters make no difference.
Thanks,
Brian

Not able to print anything on ATG Rest webservices

Hi..I am new to ATG Rest.. Just for the heads up, i followed following steps :-
1 ) Added rest module to MANIFEST.MF
2) Created a custom class which looks like this -
package com.sgs.utils;
import atg.nucleus.GenericService;
public class SGSdummy extends GenericService {
public void dummy() throws Exception {
 logDebug("sdbfhj");
3) Mapped it to the property file -
$class=com.sgs.utils.SGSdummy
$scope=global
loggingInfo=true
4) Configured the security for above component in restSecurityConfiguration.xml
<rest-security>
<resource component="/atg/commerce/order/dummy" secure="false">

<method name="dummy" secure="false"/>
</resource>
</rest-security>
I commented acl as i really didn't need it for a POC plus it was throwing 401 unauthorized.
5) Now I am calling it from chrome's Advanced Rest Client. However, status is 200 OK but I am not able to print a logDebug or sysout in my SGSdummy class.
 When i check console, it says "Depth 0 is greater than maximum depth 0"
 I tried to change maxDepthAllowed in configuration.properties but in vain..I need help to proceed.

Now I am trying to create a REST request using custom client. I believe it should be a POST request as I am trying to call a method. My custom client looks like this :-
package atg.rest.client;
import java.io.IOException;
import java.util.HashMap;
import java.util.Map;
import atg.rest.client.RestClientException;
import atg.rest.client.RestComponentHelper;
import atg.rest.client.RestResult;
import atg.rest.client.RestSession;
public class RestDemoClient {
/** The m username. */
private String mUsername;
/** The m password. */
private String mPassword;
/** The m host. */
private String mHost;
/** The m port. */
private int mPort;
/** The m session. */
private RestSession mSession = null;
 * Instantiates a new method call by rest.
public RestDemoClient() {
 * Execute.
 * @throws RestClientException the rest client exception
private void execute() {
 mSession = RestSession
 .createSession(mHost, mPort, mUsername, mPassword);
 mSession.setUseHttpsForLogin(false);
 Map<String,Object> params = new HashMap<String,Object>();
 params.put("atg-rest-input", "json");
 RestResult result = null;
 try {
 result = RestComponentHelper.executeMethod("/atg/rest/SGSdummy", "addOrder", new
 Object[] {}, params, mSession);
 } catch (RestClientException e1) {
 System.out.println(e1);
 try {
 if (result != null && result.getResponseCode() == 200) {
 System.out.println("Executed Successfully.");
 } else {
 System.out
 .println("Error while execution : Error Code ["
 + result.getResponseCode()
 + "] and Message ["
 + result.getResponseMessage() + "]");
 } catch (IOException e) {
 System.out.println("Error while execution Successfully.");
 * @param args
public static void main(String[] args) {
 RestDemoClient stepUtils = new RestDemoClient();
 stepUtils.mUsername = "admin";
 stepUtils.mPassword = "admin";
 stepUtils.mHost = "localhost";
 stepUtils.mPort = 8080;
 stepUtils.execute();
But everytime i execute this, I get following exception :-
atg.rest.client.RestClientException: java.io.IOException: Unauthorized Server returned HTTP response code: 401 for URL: http://localhost:8080/rest/bean/atg/rest/SGSdummy/addOrder
Exception in thread "main" java.lang.NullPointerException
at atg.rest.client.RestDemoClient.execute(RestDemoClient.java:64)
at atg.rest.client.RestDemoClient.main(RestDemoClient.java:82)
I tried different set of credentials but nothing seems to work out for me.
However it always works fine for GET requests. I am able to see status as 200 OK but it never hits my addOrder() method in SGSdummy class, hence I am not able to print sysout in that method. For status 200 OK GET requests, my logs say "[JSONOutputCustomizer] Depth 0 is greater than maximum depth 0. Outputting object of class java.lang.String as string rather than continuing to nest."
Can you give me some pointers how to run it without any errors plus it should print a random sysout in my custom class. Thanks

User not able to print from SAP

Hi guys,
User is not able to print from SAP. The printer is directly connected to his PC. It is not a network printer. The user is able to print at OS level perfectly. IN SP01, it shows in green and the print job has been completed successfully. I can see the output request. Its all fine in SAP. I am not sure why it is not printing from SAP. Please help ?
Thanks

hi venkata,
did you already defined your printer on SAP Server using tcode SPAD ?
What kind of printing you're using ?
My suggest for simplest one is create new output devices.
Type tcode SPAD
Give simple name
Choose SAPWIN for device type (if you're using WIndows clients)
On Access Method tab
Choose Host Spool Access Method F : Front end Printing or G :
For Host Printer fill with __DEFAULT (remember double underscore)
save and test it.
ardhian
http://sapbasis.wordpress.com

Users not able to print local (frontend)

SAP users are not able to print LOCL (front-end). The error message found in SP01 is waiting for formatter. This is no dump on ST22 related to this problem. SM21 is clean as well. SM66 looks OK. There are plenty of spool work process in wait status (SM50). How to troubleshoot this problem?

Hello.
Is this an issue across all of the users?
The way i would look into this is first look at the user in SU01. Does the user have local as the printer default and is print immediately checked?
From there i would have a look at the spool using transaction SP01. Is this beginning to get full?
If it is just specfic users is there any differences with the SAPGui's to someone that it works with? Does the users have SAPLPD coming up? This often gives a better error than the spool. If it is what is the error.
Sorry if you have already looked into this but this is the process i always work through with printing errors
Kind Regards,
Emily
Edited by: Emily Needham on Jul 28, 2009 3:24 PM

Not Able to Print in PDF Format Apex

we are not able to print in pdf format with using a template, if we use default layout we are getting a pdf output,
Can any one please help me on this issue....
Thanks
Malleswar

Hello Malleswar,
we are not able to print in pdf format with using a template, if we use default layout we are getting a pdf output,If your scenario with APEX Listener is generally capable of producing a PDF when using a working template, than the error is very likely to be in your template, not in APEX Listener.
If that's the case, you'll probably find more people with experiences on how to build custom xsl-templates into your APEX application in the APEX forum: {forum:id=137}.
If you decide to post there (or even if you think it's better to continue here), please provide information on your APEX and APEX Listener version and whether you see some error information in APEX Listeners log when trying your own template or not. If you don't see anything there right now, enabling debug mode will make the log more verbose and probably provide a hint on which part of your template can't be processed properly by the FOP built into APEX Listener.
-Udo

Not able save printer defaults as the scale is always 150%

Similar Messages

Maybe you are looking for