Not able t delete ODS data

Hi Experts,
I am trying to delete ODS data, but it not getting deleted.
When I scheduled for deletion (ODS manage) it is showing delete icon for particular req, after some time automatically it is showing reporting symbol in the
Place of delete symbol.
Can u please explain me why ODS not allowing to delete the data.
Regards,
Venkat.

Hi,
You can't delete a request from the ODS when it is alredy updated into any datatarget or when the request lies under any new request.
I.e if the request you want to delete is older and if a new request is loaded after the req you want to delete then you can't delete the old request.
In such a situation delete the requests loaded after the request you want to delete and then delete your request.
To delete a request that has been updated into any data targget you need to reset the ODS delta status for that request(3rd column under the request tab in the ODS manage screen), and also delete the request from the concerned data target.
Hope this helps,
regards

Similar Messages

I m trying to manage space in my iPhone but what I find is I m not able to delete document data alone of an application without deleting the entire application ... Any other suggestions or methods to accompanish this? Any pointers welcome... Is this a bug

I m trying to manage space in my iPhone but what I find is I m not able to delete document data alone of an application without deleting the entire application ... Any other suggestions or methods to accompanish this? Any pointers welcome... Is this a bug

You mean take the cover off of the iPhone, to look inside? I'd recommend against it. Even with warranty expired, you might qualify for an out-of-warranty service, which for 3GS is $149.
Other than that, any repair/service options are going to cost money. You might want to see if a wireless carrier will let you get a new contract & phone.
Out of curiousity, you're just using at as, basically, an iPod Touch, if there's no cell provider? Did I understand that correctly?

Not able to delete the data from ODS

Hi All,
I have ODS which is having some requests . All the requests are being loaded with full update only. When I am trying to delete the requests from ODS, out of 4 requests 2 requests have been deleted but rest of them are not at all deleting .
As I am working in Quality system, So I don't have the access to delete request from Table level like RSODSACTREQ, RSICCONT etc...
Can you give any clue to delete the remaining 2 requests.
Thanks,

Hi kavitha,
Does the Request has data mart status.IF yes try to delete the request from the respective DSO's.
and try to delete the request.
are you deleting the Whole data from DSO ? - right click on the DSO and select deleted data from the context menu.
Regards
Prashanth K

Not able to Delete the data from Memory card

Hi all,
I have bought a new nokia 3120 classic.it is working fine but recently i have received some data from my friend.
Then suddenly the problem begins like.. when i take a photo.. i am getting error like the image is not in the format and i am not able to save that.And also, the main problem is I am unable to delete the data from my memory card.
Every time after deleting i am getting the same data.
Why this happening..is it because of VIRUS?? If so how to delete the virus from my memory card??
When i contacted the nokia care people in bangalore they are saying that they can offer the service of formatting the memory card??
Except that my Phone is working fine..the problem is with Memory card!!!
Please help me...

you can actually format your memory card first see if you have such option on your phone to format directly from the phone if that is not possible you can always use a card reader and reformat your card using your pc. just understand that all data from that memory card will be lost unless you do a back up of it. if you do a back up and restore the data to the memory card after reformat you might get the same issue so be careful as to what you will decide to do with the data from the card. once you format your card it should all be good unless the card is corrupted itself which can also happen. but first try with the reformat and see if it works out for you.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

ODS request not able to delete very urgent

Hi All,
I am loading the data from r/3 system to bw (bi 7.0), the objct is Obpartner master data loading into this data targets are 0bp_o01, 0bpartner. there is no further loads.
while loading the delta load i am getting error message like " last delta not updated, repeat the last delta' .while i am checking in the monitor scree the request it's showing red , but in the data targets the request are showing green colour.
Note - i tried to chnge the status from green to red but it's not allwoing to change the status because " the requeest is partially activated u can't chage the status".
in the data targets i am trying to delete the the request but i am not able to delete the request, while selected request only for deletion it's asking for rollback.if u click on continue rollback all request will be going to delete.
please advise me is there any way to delete the request , i will assign the full points for right answer.
hi all,
there is no further loads , while i am trying to change
it's giving message like " the request is partially activated u con't update".
i think there is one procedure but i am not sure about
that one in se16 we can give the rsodsactreq. is it possible to delete the request here....
please advise if anybody knows.......
thanks
kk
Message was edited by:
kk

Hi ,
This should work ..
The request cannot be deleted in the administration of the data target, make sure that there is no data in the activation queue of the ODS for this request. If there is data nevertheless, make sure that table rsodsactreq contains all entries for this request and ODS in the operation field has the value 'U'. If this is the case, use transaction SE16 to delete all entries for this request and ODS object from tables rsiccont, rsmonicdp and rsodsactreq. Then set the 'from date' to a value that is older than the oldest loaded request in this ODS in the administration of the data target and choose 'Refresh'. This corrects the administration. The data in the activation queue does not cause a problem, it is deleted the next time all new requests are activated.
Regards
pavan
appreciate with points if it helps

I am not able to see the data By request id in ODS

HI Gurus,
I am trying to do data loads from flatflies based on Region to ODS(We have flat files based on region for each region we have one flatfile) .I have loaded 2 files into ods.But when i am checking the data in ODS by request id .I am seeind 2 regions data on one request id .I am not able to see the data for other request id.
For example:
We have two flat files one is region 1: 5100 and region 2: 5030
Request id 1: contains region 5100 data
request id 2 : contains region 5030 data.
But when i am checking the data in ODS its showing 5100&5030 data onn request id 1.I am not seeing any data for requestid 2.
Please help me out.

Hi,
Active data cant be seen by Request id but definitely change log table contains request id and list of records per request
Go to Manage ---> Contents tab --> New Data. Over here you can enter the request number and check the data request wise.....The same can be done for Change log
Check the log in SM37 if it exists there or not.
May be the number of records will be more and depending upon the system processses it will be taking time to load.ID request is loaded to ODS then it could be activation time
Hareesh

Problem Using HTTP Dispatcher -- Could Not able to get the data in JSP

Hi, I am using HTTP Dispatcher to send my events to particular URL which is a JSP page. I am trying to populate the received event through URL and populate to a oracle data base. But could not able to get the data in Oracle database.
Code is :
<h1>JSP Page</h1>
<%
long type = 0;
String tagId = null;
String timeStr = "0";
String deviceName = "";
// Get Event Parameters
// Available Parameters: id, siteName, deviceName, data, time, type, subtype, sourceName, correlationId
try
type = Long.parseLong(request.getParameter("type")); // Get type
tagId = request.getParameter("id"); // Get tagId
timeStr = request.getParameter("time"); // Get time
          deviceName = request.getParameter("deviceName");
catch (Exception e)
out.println( "Error: "+e.getMessage() );
          // Write into DB.
          try {
          if ((tagId == null) || (type != 200) ){
               // Do Nothing
               //return;
          } else {
               OracleDataSource ods = new OracleDataSource();
               String URL = "jdbc:oracle:thin:@//3.235.173.16:1525/vislocal";
               ods.setURL(URL);
               ods.setUser("cus");
               ods.setPassword("cus");
               Connection myConn = ods.getConnection();
               Statement stmt = myConn.createStatement();
               String selectQuery =
                         "SELECT MAX(rfid_raw_reads_id) as max_id FROM "+
                    "cus.rfid_raw_reads ";
               ResultSet rs = stmt.executeQuery(selectQuery);
               String maxId = "1";
               if (rs.next()) {
                    maxId = rs.getString(1);
               String selectMaxTagIDQuery =
                         "SELECT MAX(rfid_raw_reads_id) as max_id FROM "+
                    "cus.rfid_raw_reads WHERE tag_id = '" + tagId + "'" ;
               stmt = myConn.createStatement();
               rs = stmt.executeQuery(selectMaxTagIDQuery);
               String maxTagId = "1";
               if (rs.next()) {
                    maxTagId = rs.getString(1);
               long primaryKey = 1;
               long tagKey = 1;
               try {
                    primaryKey = Long.parseLong(maxId) + 1;
                    tagKey = Long.parseLong(maxTagId) + 1;
               } catch (Exception e) {
               long currentTime = System.currentTimeMillis();
               long updateKey = (tagKey - 1);
               String updateQuery = " UPDATE cus.rfid_raw_reads SET read_end_time = " + currentTime + " WHERE rfid_raw_reads_id = " + updateKey;
               Statement updateStmt = myConn.createStatement();
               updateStmt.execute(updateQuery);
               String query =
                    "INSERT INTO cus.rfid_raw_reads (rfid_raw_reads_id, tag_id,device_name,read_start_time) VALUES ("+ primaryKey + ",'" + tagId + "'," + deviceName + "'," + System.currentTimeMillis() + " )" ;
               Statement insertStmt = myConn.createStatement();
               insertStmt.execute(query);
               myConn.commit();
               myConn.close();
          } catch (Exception e) {
%>
<p>For browser debug:
<%
out.println( "Type="+type+" ID="+tagId +" time="+timeStr );
%>
Kindly suggest where is the problem...
Thanks and regards
Mohammad Nasim Akhtar

HI Prabhat,
Thanx for your reply, I worked out and able to receive the data in oracle database, Actually there was some problem in insert Query. Now I have tested the same... and able to edit the same in the Database.....
But I am facing a new problem, Http Dispatcher in SES console is displaying all the Events generated as well as event in Que but there is no events in the Event Send. I guess it is not able to send the events.....?????
Event statical is showing like this
Events Received: 0 (0.00/sec)
Events Generated: 311 (0.19/sec)
Events Sent: 2 (0.19/sec)
Queued Events: 309 (0.19/sec)
Kindly suggest where is the problem, Is it a JSP problem or OSES end problem.....
Thanks and regards
Nasim

I am not able to delete my files.

I am not able to delete my files. When I delete file It ask me for password, and then It delete from system but hard does not show any free space that must be created when I delete some file. Please help me.

After deleting ,no data is going trash.
I am getting this problem from 3 three days. Rebooting system is not working. It seems like that when I delete file its move to some other location.
If it is security feature then please tell me how can I change it?

Not able to delete inbound delivery.

Hi Gurus,
Please help me delete inbound delivery. I have a ticket where user is not able to delete inbound delivery. I tried to delete this delivery and I’m also getting the same errors that user is getting.
I have tried to insert real screen shots from production system in this post to give a better understanding of the scenario.
The situation is: PO was created for 2 line items for same material but different batch, for different quantities.
For line item 1:
1.      Two separate partial deliveries were received along with 1 delivery note each, for quantities 14,957.130 KG and 855.017 KG.
2.      Goods issue was posted for both quantities.
3.      Invoice receipt was done for both quantities.
4.      Goods receipt was done for both quantities.
5.      However, goods receipt was later reversed for quantity 14,957.130 KG.
Screenshots Line item 1
For line item 2:
1.      One delivery was received for full quantity of 292.112 KG.
2.      Goods issue was posted for same quantity.
3.      Invoice receipt was posted for same quantity.
4.      Goods receipt was posted for same quantity.
5.      However, goods receipt was later reversed for full quantity.
Inbound Delivery screens below:
Error VL32N screen
Message in VL09 when trying to reverse goods movement with reference to inbound delivery:
Please tell me how can this inbound delivery be deleted?
Points will be awarded for right help.
Thank you for viewing.

Hi
BV Yadav:
1. it's the business user who posted the invoice, and posted goods issue the was it appears in PO history. i'm not sure how they did it.
Kamlesh: I tried both, changing the document date and delivery date to current. i still got same error. still not able to delete inbound delivery.
Tomas Figura: Puaway QTY is already 0. this field is blank, nothing in it. pic below:
Note: someone has suggested to follow the process to reverse as many postings that have been done against the PO as possible and ultimately delete the PO, this will break all links between PO and inbound, outbound deliveries. and hence, there won't be a need to delete inbound delivery anymore. then the business user can start the brand new process from scratch by creating a new PO, create a new outbound, inbound deliveries, and all. what do you guys think of it? Please comment.
Thank you guys.

Function Module to Delete ODS Data based on Request

Hi All,
Is there any specific function module to delete ODS data based on Request.
I found the program RS_DEL_ODS_1 which is using the FM RSAR_ODS_API_DEL.
But this FM is deleting the request at PSA level.
Is there any alternate FM?Or is there any ABAP Program or so?

Hi,
Deletion of specific request is not perimitted for ODS objects. You can delete the most recent request, but if you delete any previous requests, all the requests up to that request will also be deleted.
You can do it by write an ABAP program to identify the specific requests to be deleted for ODS.
Regards
CSM Reddy

Not Able To Delete Master Agreements/Sub Agreements

Hello Everybody,
I have to delete a Master Agreement or Sub Agreement. The Help sections says that in order to be able to delete a MA/SA the following conditions should be met :
1) The current date should be greater than end date.
2) The current date should be greater than the Retention Date
3) The document should not be flagged as perpetual.
My document meets all the above conditions but when I try to delete it, I get a pop-up saying that the 'Document could not be deleted. It has been restored to its previous version'. I checked the log and it didn't help much. The Error there was 'Unable to delete the document'.
Now, here is the best part : I have a validation script that runs on a MA. If I make that script inactive, the document gets deleted. When I make it Active, I am not able to delete the document. The script, independently, runs without any error but seems to be generating exceptions here.
I am not sure why the system behaves this way. Any help is appreciated.
Thanks In Advance,
Devesh

Erik,
Thanks for the reply.
We have actually tried the approach you are suggesting before posting this thread. I wrote a similar logic to see whether the checkbox is checked and then delete it. But it was not of any help.
The same problem occurs. But the moment I make the script inactive things work now.
So, as of now, the problem is still there.
Thanks
Devesh

Not able to see the data in the report

Hi All
      In my cube i am having data.But when i am running the report ,i am not able to see the data.
    The error its throwing is -No Applicable data found.
    what could be the problem,please provide me the idea to solve the problem.
Thanks&regards
syam prasad dasari

HI,
See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
Thanks

Not able to get the data in COSB Table

Hi Colleagues,
I have created a Project and assign the WBS number to a Sales order and also have done all the settings in Result Analysis.
But still not able to get the data in COSB table.
Could you please suggest me the steps and process, Might be i have missed something..
Thanks in Advance
Regards
Nitin

Hi Ken,
I have below mentioned requirement
COSB will show value by object number and need to pass the object number to PRPS table to find the corresponding WBS element and then pass the WBS element to VBAP table to find the corresponding SO line item.
Please let me know as Functional prospect what I have to do to bring this values in COSB table.
Regards
Nitin

Not able to fetch the data by Virtual Cube

Hi Experts,
My requirement is I need to fetch the data from Source System (From Data base table) by using Virtual Cube.
What I have done is I have created Virtual Cube and created corresponding Function Module in Source System.
That Function MOdule is working fine, if Data base table is small in Source System.But If data base table contains huge amount of data (millions of record), I am not able to fetch the data.
Below is the code I have incorporated in my function module.
c_th_mapping TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_TH_IOBJ_FLD_MAPPING.
DATA:
    l_s_map TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_S_IOBJ_FLD_MAPPING.
l_s_map-iobjnm = '0PARTNER'.
l_s_map-fldnm = 'PARTNER'.
insert l_s_map into table l_th_mapping.
create object l_r_srv
    exporting
       i_tablnm              = '/SAPSLL/V_BLBP'
      i_th_iobj_fld_mapping = l_th_mapping.
l_r_srv->open_cursor(
    i_t_characteristics = characteristics[]
    i_t_keyfigures      = keyfigures[]
    i_t_selection       = selection[] ).
   l_r_srv->fetch_pack_data(
    importing
      e_t_data = data[] ).
return-type = 'S'.
In the above function Module,Internal table L_TH_MAPPING contains Info Objects from Virtual Cube and corresponding field from Underlying data base table.
The problem where I am facing is, in the method FETCH_PACK_DATA, initially program is trying to fetch all the recordsfrom data base table to internal table.If Data base table so lagre, this logic is not working.
So would you please help me how to handle these kind of issues.

Hi Experts,
My requirement is I need to fetch the data from Source System (From Data base table) by using Virtual Cube.
What I have done is I have created Virtual Cube and created corresponding Function Module in Source System.
That Function MOdule is working fine, if Data base table is small in Source System.But If data base table contains huge amount of data (millions of record), I am not able to fetch the data.
Below is the code I have incorporated in my function module.
c_th_mapping TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_TH_IOBJ_FLD_MAPPING.
DATA:
    l_s_map TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_S_IOBJ_FLD_MAPPING.
l_s_map-iobjnm = '0PARTNER'.
l_s_map-fldnm = 'PARTNER'.
insert l_s_map into table l_th_mapping.
create object l_r_srv
    exporting
       i_tablnm              = '/SAPSLL/V_BLBP'
      i_th_iobj_fld_mapping = l_th_mapping.
l_r_srv->open_cursor(
    i_t_characteristics = characteristics[]
    i_t_keyfigures      = keyfigures[]
    i_t_selection       = selection[] ).
   l_r_srv->fetch_pack_data(
    importing
      e_t_data = data[] ).
return-type = 'S'.
In the above function Module,Internal table L_TH_MAPPING contains Info Objects from Virtual Cube and corresponding field from Underlying data base table.
The problem where I am facing is, in the method FETCH_PACK_DATA, initially program is trying to fetch all the recordsfrom data base table to internal table.If Data base table so lagre, this logic is not working.
So would you please help me how to handle these kind of issues.

Report exection problem for one user - not able to see the data.

Hello Friends ,
Need some help . I have got the one ticket from bussniess side about the report execution .
Unfortunately , I am also not having authorisation of that report due to sensible data.
Problem - User is executing the report but some how he is not ABLE TO see the data for one company code Hierachy .
I executed the same report through RSSMQ via his user id , and I got the below message.
All value were selected . Hierachy Authorisation cannot be used.
A displayed hierachy requier a hierachy authorisation .
But when i checked his authorisation , I am able to see that he should have authorisation to all the hireachy .
could you please let me know , how can I check more ?
Regards,

after accessing the report , u go to su53 tcode and check the authorization and u can see what is problem in authorization for the that user and u can send the details to secuity team to rectify the issue ,

Not able t delete ODS data

Similar Messages

Maybe you are looking for