Not able to access data in Query

Hi,
I have loaded data using DTP from 2 different source systems.
One is 3.x emulated datasource and the other is New 7.0 datasource.I have loaded data sucessfully in to DSO.Built a query on same.
But when iam executing the query by material as selection criteria.Iam not able to found data in query from one source system.The same data is available in DSO.Please needed in this regard.

Hi Venkat,
After extracting data into DSO check the request whether active or not.
Check data in DSO in contents.
If is there any restrictions on info providers in Queries.
Let us know status clearly.......
Reg
Pra

Similar Messages

Not able to input data in query analyzer

Hi buddies,
I am working on IP.I have created a input ready query.For few values of company code there is no transaction data available,but it should show us blank so that I can atleast punch data.I am able to punch data for company codes for which transaction data is avilable .For remaining company codes for which transaction data is not availbale it is showing yellow coloured rows not allowing to input data.
Solutions would be really appreciated.This is high priority issue.
With regards,
Lalitha

Hi,
1) if you have no transaction data, it will not show you the company codes, unless you select in your query definition "master data' instead of posted values in the query properties (for company code)
2) yellow lines are subtotals.... To enable it input ready
- set query to input ready in query properties
- set row to plannable in query properties
- very important: make sure each characteristic of your aggregation level has a unique value either in the filter definition or in the definition of your rows or columns. If not, your query will not be plannable
D

Not able to enter data in query designer

hi
can any one help, i created a input ready query on multi provider contain both standered and real time cube, here real time cube not contain any data.
when i created layout by taking 2 chracteristics and 2 key figures from real time cube it give me like " no data available".
what i have to do here to enter data to realtime cube key figure

First check if you have created aggregate level.
Second check the loading behavior setting on the Realtime infocube- it must be set to "Real- Time Data Target can be planned, data loading not allowed'.
Third, query must be also input ready- in other words set the Selections (key figures) to input ready in Query designer.
Finaly, when you open context menu over the query, Bex Analyzer' Analysis grid, you can check the input ready settings for every cell if you want. If you did all steps, mentioned in the text above, input ready check box will be automatically checked for every cell of input enabled keyfigures...
Alex.

Not able to access the Date variable in Bex report after SP upgrade

Hell Experts,
We have upgraded the support pack to 27 and after that we are not able to access date variable in Bex report.
We are not able to restrict the Posting date on variable, we are getting the message "Operation failed! No detailed error information from backend available".
Thanks
Chetan

Hi,
carry out basic checks like RSRV for the field,query ,Infoprovider on which this query is based..
Check whether there is any in consistent value in the posting date..
check whether objects are active correctly..
else serach for SAP note or raise OSS to SAP..
Thanks and regards
Kiran

Not able to see Data in Xcelsius 2008

Hi everyone,
My question is I am not able to see data in Xcelsius spreadsheet although I am able to connect to SAP BW and also able to see and select query but when I select Cross Tab Data in output Values it is not displaying in Xcelsius spreadsheet
System Info
Xcelsius 2008 Enterprise Trial Version SP 3.0
SAP BW 7.1 SP 6 ABAP and JAVA
Any help would be appreciated

Hi Rashid,
When you are using the BW conenction in Xcelsius you will not see any data in the spreadsheet at design time or at preview time.
To see the data you need to go SAP > Publish, then SAP > Launch to test the dashboard in the NetWeaver Portal as that is the only place where the data can be viewed.
Regards
Matt

APEX application not able to access

Hi all,
I am new in APEX.
and I have to create the same environment as the client have.
client only given me sql for importing the application developed in APEX.
I created workspace and imported the application in that. but the client is using the active directory authentication and now when i am trying to run the application at my environment then i am not able to access the application.
So could any one of you please guide me what i need to do with the APEX to login to the application with my active directory authentications.
this is somehow urgent and i am not able to get any help. so could anyone guide me.
Sanket
Edited by: user10528895 on Oct 28, 2010 10:46 PM

Hi ajinkya,
Thanks for forwording the helping hand.
but can able to mannage and found some documentas of configuration of LDAP and using the LDAP authentication at my own. and now i configured the LDAP and able to access the application.
now the next step i am stuch is the authentication is of 2 layer 1 i passed but next is there are some of the authorizations schems created and assigned to the specific users.
now if i want to get the information of the authentications schems and where the data store then from where i get the information that is my question
i am using database version 10g 10.2.0 and apex 3.0.1
Regards,
Sanket

User has appropriate permission, still not able to access one of the sharepoint site applications.

Hi,
I have tried all solutions available on internet regarding this problem but none seems to work.
As per one solution I added the user in sharepoint site collection administrator group still no luck!
As per another solution I tried to run “User Profile Service Application Proxy – User Profile to SharePoint Full Synchronization”
“User Profile Service Application Proxy – User Profile to SharePoint Quick Synchronization”
but they dont run for some reason. Both these jobs are scheduled to run everyday but last time they ran was some date in 2011. When I click on Run Now nothing happens.
I deleted all cache, forms password history everything. Added the site in trusted sites and all. No luck!
User also tried to access the site by logging onto another system but still same issue.
This user recently joined alongwith a few more people. All of them are able to access the site except this particular user. So, a web part or unpublished page cant be the reason, right?
This user is only able to access the home page which is say http://<siteurl:1234> application while the site which this user is not able to access is
http://<siteurl:2345>.
I even tried to give access through sharepoint designer but no luck! Please help!
PS: This may not be relevant but still I'm sharing. Earlier I used to add users in manage user profiles - new profile. But now as soon as the user is added into active directory there profile is getting created automatically. This might be happening due to
active directory and user profile sync but the question is how? Because I dont remember configuring this. And it was not configured earlier too.

Hi,
According to your description, my understanding is that only one user cannot access the site even though he has the right permission.
I recommend to verify the things below:
Check the permission of the user in the site to see if the permission is right.
Is http://<siteurl:2345> a new site collection ? Can the user access other pages except the home page in
http://<siteurl:1234>?
Grant needed permission to the user in the web application to see if the issue still occurs.
Delete the user and re-add the user in AD to see if the issue still occurs.
Check the ULS log for detailed error message.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Not able to get data while executing in background for mb52

Dear all,
my requirement is i want to schedule the zreport for every 1 hour.but proble is when iam executing in fore ground iam able to get data.but when iam going to scheduling this iam not able to get data.
my code is
type-pools:slis.
data zbudat type RANGE OF budat.
data wab like line of zbudat.
data zmatkl type RANGE OF MATKL.
data waz like line of zMATKL.
data zwerks type RANGE OF werks.
data wax like line of zwerks.
waz-sign = 'I'.
waz-low = 'CRUDE'.
waz-option = 'EQ'.
append waz to zmatkl.
clear waz.
waz-sign = 'I'.
waz-low = 'SGO'.
waz-option = 'EQ'.
append waz to zmatkl.
clear waz.
*waz-sign = 'I'.
*waz-low = 'FINES'.
*waz-option = 'EQ'.
*append waz to zmatkl.
*clear waz.
*waz-sign = 'I'.
*waz-low = 'LUMPS'.
*waz-option = 'EQ'.
*append waz to zmatkl.
*clear waz.
*waz-sign = 'I'.
*waz-low = 'UFO'.
*waz-option = 'EQ'.
*append waz to zmatkl.
wax-sign = 'I'.
wax-low = 'BIMI'.
wax-option = 'EQ'.
append wax to zwerks.
clear wax.
wax-sign = 'I'.
wax-low = 'BIPL'.
wax-option = 'EQ'.
append wax to zwerks.
*waz-sign = 'I'.
waz-low = 'C'.
*waz-option = 'CP'.
*append waz to zmatnr.
*clear waz.
*waz-sign = 'I'.
waz-low = 'S'.
*waz-option = 'CP'.
*append waz to zmatnr.
*clear waz.
*waz-sign = 'I'.
waz-low = 'UC'.
*waz-option = 'CP'.
*append waz to zmatnr.
*waz-sign = 'I'.
waz-low = 'F'.
*waz-option = 'CP'.
*append waz to zmatnr.
*clear waz.
*waz-sign = 'I'.
waz-low = 'L'.
*waz-option = 'CP'.
*append waz to zmatnr.
types:begin of w_tab,
       bwkey type werks_d,
       matnr type matnr,
        lgort type LGORT_D,
        budat type budat,
        labst type labst,
       endmenge type p decimals 3,
      end of w_tab.
      DATA : IT_TAB TYPE STANDARD TABLE OF W_TAB WITH HEADER LINE .
FIELD-SYMBOLS: <gt_fieldcat> TYPE slis_fieldcat_alv,
<gt_report_list> TYPE w_tab .
field-symbols <lt_pay_data> type any table.
*FIELD-SYMBOLS : <LT_DATA> LIKE LINE OF IT_TAB .
FIELD-SYMBOLS : <LT_DATA> type any .   " i have chaged it
data lr_pay_data type ref to data.
cl_salv_bs_runtime_info=>set( exporting display = abap_false
metadata = abap_false
data = abap_true ).
****SUBMIT ZQM_GR_BARGE_LOADING WITH S_date in zbudat with s_werks in zwerks with p_pend = ' ' AND RETURN .
submit RM07MLBS with MATKLA in zmatkl with werks in zwerks
"with XVBST = 'X'
using selection-SCREEN '1000' and return.
try.
cl_salv_bs_runtime_info=>get_data_ref( importing r_data = lr_pay_data ).
assign lr_pay_data->* to <lt_pay_data>.
catch cx_salv_bs_sc_runtime_info.
message `Unable to retrieve ALV data` type 'E'.
endtry.
cl_salv_bs_runtime_info=>clear_all( ).
data: obj_s type ref to ZKMINCO_MINESTOCKFROM_SAP_OUT.
create OBJECT obj_s.
data : output TYPE ZKMINMINESTOCKFROM_SAP1 ,
        record type ZKMINMINESTOCKFROM_SAP_REC_TAB ,
       wa_record like line of record.
LOOP AT <lt_pay_data> ASSIGNING <LT_DATA>.
MOVE-CORRESPONDING <LT_DATA> TO IT_TAB .
APPEND IT_TAB .
wa_record-STOCK_AS_ON_DATE = sy-datum .
wa_record-STOCK_AS_ON_TIME = sy-uzeit .
wa_record-PLANT_ID = it_tab-bwkey.
wa_record-STORAGE_LOC_ID = it_tab-lgort .
wa_record-MATERIAL = it_tab-matnr .
wa_record-STOCK_QTY = it_tab-labst.
append wa_record to record.
clear wa_record.
endloop.
output-MINESTOCKFROM_SAP-record = record .
CALL METHOD obj_s->MINESTOCKFROM_SAP_OUT
EXPORTING
    output = output .
commit work.
Thanks in advance.

Hi,
I assume that in your case you have two program lets say ZFOREGROUND and ZBACKGROUND (Called inside zforeground using submit statement)
zforeground has :
1. a input field to browse excel sheet or some file at the selection screen, and
2. button 'post all' to determine the background processing.
Now your requirement is such that you want zbackground to get scheduled as background job when post all button is clicked.
So, within the event AT USER-Command, check the sy-ucomm as that of post all button, if so write the following code to schedule the job:
DATA: jobname LIKE tbtcjob-jobname.
DATA :jobcount LIKE tbtcjob-jobcount,
host LIKE msxxlist-host.
DATA: BEGIN OF starttime.
INCLUDE STRUCTURE tbtcstrt.
DATA: END OF starttime.
DATA: starttimeimmediate LIKE btch0000-char1.
DATA: gv_job_dt TYPE sy-datum,
gv_job_tm TYPE sy-uzeit.
jobname = 'EXCLUSION_LISTING'.
gv_job_dt = sy-datum.
gv_job_tm = sy-uzeit.
Job open
CALL FUNCTION 'JOB_OPEN'
EXPORTING
delanfrep = ' '
jobgroup = ' '
jobname = jobname
sdlstrtdt = sy-datum
sdlstrttm = sy-uzeit
IMPORTING
jobcount = jobcount
EXCEPTIONS
cant_create_job = 01
invalid_job_data = 02
jobname_missing = 03.
IF sy-subrc NE 0.
"error processing
ENDIF.
Insert process into job
SUBMIT ZBACKGROUND AND RETURN
WITH p_file1 = gv_file_cust_exc "<----
Parameters which you want to pass to report zbackground from the report
WITH p_file2 = gv_file_win_deal "------zforeground
USER sy-uname
VIA JOB jobname
NUMBER jobcount.
IF sy-subrc ne 0.
"error processing
ENDIF.
Close job
starttime-sdlstrtdt = gv_job_dt.
starttime-sdlstrttm = gv_job_tm.
CALL FUNCTION 'JOB_CLOSE'
EXPORTING
event_id = starttime-eventid
event_param = starttime-eventparm
event_periodic = starttime-periodic
jobcount = jobcount
jobname = jobname
laststrtdt = starttime-laststrtdt
laststrttm = starttime-laststrttm
prddays = 1
prdhours = 0
prdmins = 0
prdmonths = 0
prdweeks = 0
sdlstrtdt = starttime-sdlstrtdt
sdlstrttm = starttime-sdlstrttm
strtimmed = starttimeimmediate
targetsystem = host
EXCEPTIONS
cant_start_immediate = 01
invalid_startdate = 02
jobname_missing = 03
job_close_failed = 04
job_nosteps = 05
job_notex = 06
lock_failed = 07
OTHERS = 99.
IF sy-subrc EQ 0.
WRITE:/1 'JOB' COLOR 3,
jobname COLOR COL_GROUP,
'Scheduled in Background' COLOR 3. "error processing
gv_time = starttime-sdlstrttm.
gv_date = starttime-sdlstrtdt.
ENDIF.
Above code will schedule the report zbackground in background.
Note:
the program schduled in background will not be able to access any data present on your presentation server. data should be provided either by the program schhedulling it in foreground or it has to be thr in application server.
Regards,
Ravi

HT203163 I am not able to access to iphone updates/store; as secure link to itunes store failed. I tried to turn firewall off, reinstall itunes and other troubleshoot options but none of them works.....

I am not able to access to iphone updates/store; it displays the message under diagnostics 'secure link to itunes store failed'.
I tried to turn firewall off, reinstall itunes and other troubleshoot options but none of them works......
Please help.

Update: I tried the "Toshiba Recovery Wizard" after everything else either fizzled out or hung up. After going all the way thru the recovery process (up to 100%), I finally got an error message.....it didn't work. And now, when I fire up the computer, I don't even get to that menu with the recovery options....the only thing I can boot into is the screens with the various ways to run your OS (in "safe mode", "safe mode with networking", etc).
I'm not a techie, but I'm guessing at this point, the part of my hard drive that got damaged in the fall was, at the very least, the partition with the recovery data. Couple that with the fact that this cheapo Toshiba laptop didn't even come with recovery disk (or ANY kind of disk, even basic installation software!), I'm screwed: I don't see any way to get a workable computer now without some kind of disk to boot from. So NOW my concern is more about spending the $$ for a new OS and THEN finding out the hard drive has other problems too...is broken in some other way to boot.
How to check this? As I said, I did run "chkdsk" back when I could get into the recovery menu and run the fix-it programs. It didn't note any problems. Thinking of taking this opportunity to upgrade to Windows 7 from Vista (which I never liked), but I have to know that the computer is otherwise ok....how to be sure?

Not able to access the multi-source universe in WebI

Hi
I am not able to access the multi-source universe in WebI, getting below error message.
[Data Federator Driver] Unexpected exception: com.crystaldecisions.thirdparty.org.omg.CORBA.UNKNOWN: null | [Data Federator Driver] Failed to connect to any of the provided 'Central Management Server' hosts.
And also Not able to perform anything to designing multi-source universe in business Layer.
Universe back-end is
Oracle 11g and
SQL2008 DB
Version IDT: 4.1 Support Pack 2
SAP BusinessObjects BI Platform 4.1 Support Pack 2,

Hi Sreeni,
You can create a new APS in CMC containing the Data Federation Service with
-Xmx2g -> 8g (This is the suggested range)
Make sure you remove this service from the existing APS and then create a new one.
You could refer SAP KBA 1694041 - BI 4.x Consulting:- How to size the Adaptive Processing
Server (APS) which would assist you in sizing the APS.
Regards,
Manpreet

I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc. I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting fo

I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc.
I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting for it to work.
Can you please help me with this?
Thanks Matthew.

Hello,
The services you listed in your post will require a data plan which is provisioned by your wireless provider. You may want to contact your wireless provider to see if you have the correct plan.
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

I am not able to access the internet without wi-fi after updated to iOS 7.0.4. Please help!

I am not able to access the internet without wi-fi after updated to iOS 7.0.4. Please help!

Hello sweetracy,
The following article can help restore and stabilize your cellular data connection.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/TS3780
Cheers,
Allen

I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

Not able to access the web based RuleAuthor of Oracle Business Rules

Hi ,
I have Installed Oracle SOA Suite (11g) version from here .
I have followed the steps in the Installation guide .
I was able to install it successfully. At present I need to Work on the oracle Business Rules.
As per the documentation I have tried to access the Rules author at the following URL
http://localhost:7001/ruleauthor/
But I was not able to access it.
Please let me know if I need to install any other component to access Rule Author. please let me know if you need any more information.
Thanks in advance for your time,
Raja Kumar

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

BlackBerry Curve 9320 not able to access BlackBerry App World

Hi All,
I am new to Using BlackBerry.I have got a BlackBery Curve 9320 also as it requires 3G Net Connection for accessing internet i have put Vodafone's 3G internet pack as my network provider is Vodafone.But still i am not able to access my BlackBerry App World and many other stuff.But when i connect to my friend's mobile internet with Wifi i am able to access BlackBerry App word.Also when i try to access BlackBerry App it says " we cannot connect you to Blackberry App World.Please ensure that your devide is connected to the wireless network and try again"
Please Help and Guide...
Have a Rocking Day ahead!
Thanks and Regards,
Sushma Ramakrishnan Iyer (PS No. 298028),
SalesForce.Com Team,
HiCE Business Unit,
Old Building - Block 1,
Plot No.EL - 200 | TTC Electronic Zone,Shil - Mahape Road,
Mumbai - 400710.
Mobile : +91 96 6515 6328 | Work : +91 22 6795 4111
E-mail id : [email protected]

Hello Sushu
Welcome to BlackBerry Support Forums
If you want to access most BlackBerry Application over your Mobile Network then a normal 3G data plan will not allow us, for that you have to activate BIS / BlackBerry Data Plan from our Carrier . However currently many application may work over a WiFi network .
So if you want to use those applications over your Carrier Network then call Vodafone and activate BIS on your account.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Not able to access data in Query

Similar Messages

Maybe you are looking for