Not  able to access default package classes in own package

I created a class called Constant.java in default package(no package ).
I have Connection.java in util package.
I am trying to use the Constant.java in my Connection.java like below..
public class Constant
     public static final String NEW = "01";
package util;
import Constant;
public class Connection
I am unable to compile the class Connection. My question here is Won't I able to access default package in my util package.. ?

java_guy04 wrote:
Djaunl , I understand.
but, Will I able to access default package in my util package.. ? is this correct.No, you won't be able to use classes out of the "default" package.
Because, AFAIK, if you use a classname that you haven't imported, Java automatically attempts to locate this class in the same package as the current class. It does not check the "default" package (unless that is also the current package), and since the "default" package does not have a package name, you can't import those classes either.

Similar Messages

  • Not able to access the mx.controls package

    hi,
    i found a weird issue. I'm developing my application
    entirely using actionscript 3 by creating "actionscript Project' in
    the flex builder. I need to use the ColorPicker component which is
    under mx.controls package, but to my disappointment i'm not able to
    access that mx.controls package and when i forcefully use it the
    compiler throws me an error, but when i create a new flex project
    and create an asctionscript file, i'm able to access that
    mx.controls package and also the ColorPicker class. Can anyone tell
    me what the problem is?
    Thanks,
    Shajahan

    I am having the same issue. I'm using Flex 3 and I cannot
    access the mx.controls package in any actionscript project.

  • Custom Fault Policy java class is not able to access mediator.jar file

    Hi,
    I am trying to implement the custom java class for mediator fault handling. However when this class is invoked its not able to access the "oracle.tip.mediator.common.error.recovery.MediatorRecoveryContext" class during run time (which exists in mediator.jar). However its able to access all the other imported class files which exists in other library files.
    Do we need to add mediator.jar to the weblogic classpath manually or should we place that jar file in some location in the server ?? Its currently residing in the path -- /app/oracle/product/soastg/11.1.0/SOA/soa/modules/oracle.soa.mediator_11.1.1/mediator.jar. I tried to copy the same jar into domain lib and admin lib path but there was no luck.
    Any input on this will be helpful.
    Thanks,
    Ramesh

    Hi Ramesh,
    Try out the following
    1) Copy mediator.jar from SOA_HOME>/soa/modules/oracle.soa.mediator_11.1.1 to <MW_HOME>//soa/modules/oracle.soa.ext_11.1.1/classes
    2) Goto <MW_HOME>//soa/modules/oracle.soa.ext_11.1.1/classes and run the following command:
    a. jar -xvf mediator.jar
    3) Now remove the jar file, i.e., mediator.jar from classes folder.
    4) Restart the server.
    Regards,
    Srijith

  • Not able to access javaFx charts from a remote system after using ext. jars

    We are facing following issue. Any recommendations to resolve these issues are highly appreciated.
    1. Not able to access javaFx charts from a remote system (More details at the end of mail).This is high priority requirement as we have a web based reporting application and users access it over our static IP address.
    We are using Java Fx charts in our web application where we built jnlp and jar files in a separate fx project and kept jar and jnlp’s inside our web project.
    It is working fine when we did not used any external jar files and remotely it is accessible. But when we used external jars our project is running on local
    system but remotely it is not working due to some path settings. We modified jnlp files where entry of jar files exists and modified the jar path as per our
    project. But still it did not work.
    Before using external jars inside our java fx project my jnlp looks like:
    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp spec="1.0+" codebase="http://localhost:8083/servlet/org.netbeans.modules.javafx.project.JnlpDownloadServlet/F%3A/New+FX+Projects+08-12-
    2009/JavaFXApplication3/dist/" href="JavaFXApplication3.jnlp">
    <information>
    <title>JavaFXApplication3</title>
    <vendor>Saurabh</vendor>
    <homepage href="http://localhost:8083/servlet/org.netbeans.modules.javafx.project.JnlpDownloadServlet/F%3A/New+FX+Projects+08-12-
    2009/JavaFXApplication3/dist/"/>
    <description>JavaFXApplication3</description>
    <offline-allowed/>
    <shortcut>
    <desktop/>
    </shortcut>
    </information>
    <resources>
    <j2se version="1.5+"/>
    <extension name="JavaFX Runtime" href="http://dl.javafx.com/1.2/javafx-rt.jnlp"/>
    <jar href="JavaFXApplication3.jar" main="true"/>
    </resources>
    <application-desc main-class="com.sun.javafx.runtime.main.Main">
    <argument>MainJavaFXScript=misc.Test</argument>
    </application-desc>
    <update check="background">
    </jnlp>
    After modifying my jnlp as per my project as
    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp spec="1.0+" codebase="/PiFx/FxFiles/" href="JavaFXApplication3_browser.jnlp">
    <information>
    <title>JavaFXApplication3</title>
    <vendor>Saurabh</vendor>
    <homepage href="/PiFx/FxFiles/"/>
    <description>JavaFXApplication3</description>
    <offline-allowed/>
    <shortcut>
    <desktop/>
    </shortcut>
    </information>
    <resources>
    <j2se version="1.5+"/>
    <extension name="JavaFX Runtime" href="/PiFx/FxFiles/javafx-rt.jnlp"/>
    <jar href="/PiFx/FxFiles/JavaFXApplication3.jar" main="true"/>
    </resources>
    <applet-desc name="JavaFXApplication3" main-class="com.sun.javafx.runtime.adapter.Applet" width="500" height="500">
    <param name="MainJavaFXScript" value="misc.MyChart">
    </applet-desc>
    <update check="background">
    </jnlp>
    After adding external jars my jnlp looks like this :
    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp spec="1.0+" codebase="http://localhost:8083/servlet/org.netbeans.modules.javafx.project.JnlpDownloadServlet/F%3A/New+FX+Projects+08-12-
    2009/JavaFXApplication3/dist/" href="JavaFXApplication3.jnlp">
    <information>
    <title>JavaFXApplication3</title>
    <vendor>Saurabh</vendor>
    <homepage href="http://localhost:8083/servlet/org.netbeans.modules.javafx.project.JnlpDownloadServlet/F%3A/New+FX+Projects+08-12-
    2009/JavaFXApplication3/dist/"/>
    <description>JavaFXApplication3</description>
    <offline-allowed/>
    <shortcut>
    <desktop/>
    </shortcut>
    </information>
    <resources>
    <j2se version="1.5+"/>
    <extension name="JavaFX Runtime" href="http://dl.javafx.com/1.2/javafx-rt.jnlp"/>
    <jar href="JavaFXApplication3.jar" main="true"/>
    <jar href="lib/jdom.jar"/>
    </resources>
    <application-desc main-class="com.sun.javafx.runtime.main.Main">
    <argument>MainJavaFXScript=misc.Test</argument>
    </application-desc>
    <update check="background">
    </jnlp>
    I have modified the jnlp as per my project :
    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp spec="1.0+" codebase="/PiFx/FxFiles/" href="JavaFXApplication3_browser.jnlp">
    <information>
    <title>JavaFXApplication3</title>
    <vendor>Saurabh</vendor>
    <homepage href="/PiFx/FxFiles/"/>
    <description>JavaFXApplication3</description>
    <offline-allowed/>
    <shortcut>
    <desktop/>
    </shortcut>
    </information>
    <resources>
    <j2se version="1.5+"/>
    <extension name="JavaFX Runtime" href="/PiFx/FxFiles/javafx-rt.jnlp"/>
    <jar href="/PiFx/FxFiles/JavaFXApplication3.jar" main="true"/>
    <jar href="/PiFx/FxFiles/lib/jdom.jar"/>
    </resources>
    <applet-desc name="JavaFXApplication3" main-class="com.sun.javafx.runtime.adapter.Applet" width="500" height="500">
    <param name="MainJavaFXScript" value="misc.MyChart">
    </applet-desc>
    <update check="background">
    </jnlp>
    where PiFx is our project Name

    We have tried few things given in thread : http://forums.sun.com/thread.jspa?threadID=5401999
    Now it is not able to get the external jar file only
    exception: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar.
    java.io.IOException: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar
         at com.sun.deploy.net.DownloadEngine.getCachedResourceFilePath(Unknown Source)
         at com.sun.javaws.LaunchDownload.getSignedJNLPFile(Unknown Source)
         at com.sun.javaws.LaunchDownload.checkSignedLaunchDescHelper(Unknown Source)
         at com.sun.javaws.LaunchDownload.checkSignedLaunchDesc(Unknown Source)
         at sun.plugin2.applet.JNLP2Manager.prepareLaunchFile(Unknown Source)
         at sun.plugin2.applet.JNLP2Manager.loadJarFiles(Unknown Source)
         at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Exception: java.io.IOException: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar
    exception: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar.
    java.io.IOException: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar
         at com.sun.deploy.net.DownloadEngine.getCachedResourceFilePath(Unknown Source)
         at com.sun.javaws.LaunchDownload.getSignedJNLPFile(Unknown Source)
         at com.sun.javaws.LaunchDownload.checkSignedLaunchDescHelper(Unknown Source)
         at com.sun.javaws.LaunchDownload.checkSignedLaunchDesc(Unknown Source)
         at sun.plugin2.applet.JNLP2Manager.prepareLaunchFile(Unknown Source)
         at sun.plugin2.applet.JNLP2Manager.loadJarFiles(Unknown Source)
         at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Exception: java.io.IOException: Cannot find cached resource for URL: http://192.168.0.111:8086/PiFx/FxFiles/lib/jdom.jar
    JavaFXApplication3.jnlp
    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp spec="1.0+" codebase="/PiFx/FxFiles/" href="JavaFXApplication3.jnlp">
        <information>
            <title>JavaFXApplication3</title>
            <vendor>Saurabh</vendor>
            <homepage href="/PiFx/FxFiles/"/>
            <description>JavaFXApplication3</description>
            <offline-allowed/>
            <shortcut>
                <desktop/>
            </shortcut>
        </information>
        <resources>
            <j2se version="1.5+"/>
            <extension name="JavaFX Runtime" href="/PiFx/FxFiles/javafx-rt.jnlp"/>
            <jar href="/PiFx/FxFiles/JavaFXApplication3.jar" main="true"/>
            <jar href="/PiFx/FxFiles/lib/jdom.jar" main="true" />
        </resources>
        <application-desc main-class="com.sun.javafx.runtime.main.Main">
            <argument>MainJavaFXScript=misc.MyChart</argument>
        </application-desc>
        <update check="background">
    </jnlp>JavaFXApplication3_browser.jnlp
    <?xml version="1.0" encoding="UTF-8"?>
    <jnlp spec="1.0+" codebase="/PiFx/FxFiles/" href="JavaFXApplication3_browser.jnlp">
        <information>
            <title>JavaFXApplication3</title>
            <vendor>Saurabh</vendor>
            <homepage href="/PiFx/FxFiles/"/>
            <description>JavaFXApplication3</description>
            <offline-allowed/>
            <shortcut>
                <desktop/>
            </shortcut>
        </information>
        <resources>
            <j2se version="1.5+"/>
            <extension name="JavaFX Runtime" href="/PiFx/FxFiles/javafx-rt.jnlp"/>
           <jar href="/PiFx/FxFiles/JavaFXApplication3.jar"  main="true"/>
            <jar href="/PiFx/FxFiles/lib/jdom.jar" main="true"/>
        </resources>
        <applet-desc name="JavaFXApplication3" main-class="com.sun.javafx.runtime.adapter.Applet" width="500" height="500">
            <param name="MainJavaFXScript" value="misc.MyChart">
        </applet-desc>
        <update check="background">
    </jnlp>Applet Code
    javafx({
    archive: "../FxFiles/JavaFXApplication3.jar",
    draggable: true,
    height:hgt,
    width:wdt,
    code: "misc.MyChart",
    name: appletName,
    id: appletName
    });

  • Not able to access the result set from one member function to another

    Im new to jdbc
    I have declared a connection object , a result set object and statement object in one member function and i am not able to access these in another member function. But both are in the same class
    Kindly help
    Thanks
    Shasi

    Kindly refrain from double-posting:
    http://forum.java.sun.com/thread.jspa?threadID=700659&tstart=0
    - Saish

  • Not able to access the Database & Clusterware from OEM Console.

    hi,
    I had installed Oracle RAC 11g R2 in RHEL 5.3 Operating environment. I had installed my Oracle RAC with Enterprise Manager Console.
    Its with the defailt port 1158. After the installation when i try to access my EM Console, i was not able to access the Database and Clusterware from EM Console.
    When i access the EM console with url, I found with Startup and Perform Recovery option. But whereas my database is already startup and running.
    So when i click startup its saying database is already started. Since it is a prodution environment i dont want to go with Perform recovery option.
    Please tell me hw to attach files in this thread so that i can send the snap shot of the console for your reference.
    with regards
    A.Aravind
    Edited by: 795847 on Sep 21, 2010 10:40 PM

    hi,
    As mentioned due to not having the default listener port 1521, we are facing this problem.
    As meniotned i had changed the emoms.properties file and changed the port and my emctl page is opening.
    But am not able to access the other parameters like ASM, Servers, Clusters etc bcoz since in some file it is looking for 1521 default port.
    So is it better to go for emctl deconfig and config again or to change the port the files which required.
    If i do in what are the file the default port will be located related to emctl.
    with regards
    A.Aravind

  • Not able to access the internet SOlaris 10

    I have installed solaris 10 and it is in subnet but no router. I was not able to access the internet.
    hostname.e1000g0
    hostname.hme0
    hostname6.e1000g0
    When I create the file dhcp.e1000g0 internet works but the hostname becomes unknown.
    Can someone please help me ?

    route add default 192.168.1.55 (Ipaddress of default gateway)
    DHCP able to find it dynamically but once dhcp is off we need to mention it.
    Makes it work.

  • Not able to access the web based RuleAuthor of Oracle Business Rules

    Hi ,
    I have Installed Oracle SOA Suite (11g) version from here .
    I have followed the steps in the Installation guide .
    I was able to install it successfully. At present I need to Work on the oracle Business Rules.
    As per the documentation I have tried to access the Rules author at the following URL
    http://localhost:7001/ruleauthor/
    But I was not able to access it.
    Please let me know if I need to install any other component to access Rule Author. please let me know if you need any more information.
    Thanks in advance for your time,
    Raja Kumar

    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
    Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ First Aid
    If the box marked Keep login keychain unlocked is not checked, check it.
    Select
    Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain. Quit Keychain Access.

  • The server principal "XYuser" is not able to access the database "Ydb" under the current security context

    SQL2005 on winserver 2003. I have a view in Xdb that accesses tables in 2 different databases (Xdb and Ydb) on the same server. I have mixed mode security. I have a SQL user (XYuser) that has read access to all tables and views on both databases, yet when I try to access the view using a C# windows application I get the following error:
    The server principal "XYuser" is not able to access the database "Ydb" under the current security context
    This same scenario works under SQL 2000. I looked through the postings and tried to set TRUSTWORTHY ON on both databases but that didn't help. I can access any other views or tables on the SQL 2005 server, just not the one that joins the tables cross databases. Any help is much appreciated... john

    This appears to be a Login/Database Mapping issue.  I was having this problem, but was able to resolve it as follows:
    Using the SQL Server management Studio:
    In the Object explorer, under the SERVER security folder (not the database security folder), expand Logins. 
    That is: ServerName -> Security -> Logins
    NOT: ServerName -> Databases -> DatabaseName -> Security -> Users
    Select the Login that is having the troubles.  Right click on the Login and select ‘Properties.’
    The ‘User Mapping’ page should list all databases on the server with a check mark on the databases that the Login has been mapped to.  When I was getting the error, the database in question was not checked (even though the Login was assigned as a User on the database itself).  Map the Login by checking the box next to the database name.  Set the default schema.  Then select the roles for the Login in the Database role membership list box.  I selected db_datareader and public.  After clicking OK to save the changes, the problem was resolved.
    In order to ‘Map’ the Login, the Login must not already be as User on the database, so you may have to go to the database security (ServerName -> Databases -> DatabaseName -> Security -> Users) and delete the Login from the list of database Users before mapping the Login to the database.

  • Not able to access parent instance variable in outside of methods in child

    Hi,
    I am not getting why i am not able to access parent class instance variable outside the child class intance methods.
    class Parent
         int a;
    class Child extends Parent
         a = 1; // Here i am getting a compilation error that Syntax error on token "a", VariableDeclaratorId expected after this token
         void someMethod()
              a = 1;  // Here i am not getting any compilation error while accessing parent class variable
    }Can any one please let me know exact reason for this and what is the error talks about?
    Thanks,
    Uday
    Edited by: Udaya Shankara Gandhi on Jun 13, 2012 3:30 AM

    You can only put assignments or expressions inside methods, constructors or class initializors, or when declaring a variable.
    It has nothing to the with Child extending Parent.
    class Parent {
        int a = 1;
        { a = 1; }
        public Parent() {
            a = 1;
       public void method() {
           a = 1;
    }

  • When I added a new contact the screen went black in contacts.  I'm not able to access my contacts now.  I turned the iPad off and back on, still onlythe black screen appears.

    When I added a contact to my contacts, took a picture and added Ringtone, pressed done, the screen went black and I am not able to access contacts.  I turned off the ipad but still cannot access contacts.

    I don't fully understand what the System Reset does but I've found that it cures many ills.  It's easy, quick and harmless:
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.
    A System Reset does not remove any apps, music, movies, etc. nor does it cause any settings to revert back to default.
    Also, you might wish to download the iPad-2 User Guide.  Pay special attention to page 162.  Note that this Guide also applies to the iPad-1 with IOS 4.3 except for those functions that are not supported by the hardware.
    http://support.apple.com/manuals/#ipad
    Finally,  the User Guide can be downloaded at no charge via iBooks and a less   comprehensive version of the Guide is included as a Safari bookmark.

  • After recent upgrade not able to access content preferences

    what ever the last options button you click, that information stays visible when you click on content. i'm not able to access the content portion of that set of controls.
    running WINDOWS

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]

  • I have connected an AirPlay enabled device to iphone4s. I started palying songs. I was able to access internet through 3G from iphone.After few seconds 3G symbol disappears and WiFi symbol appears. After that I'm not able to access internet. Why is it so?

    I have connected an AirPlay enabled device to iphone4s. I started palying songs. I was able to access internet through 3G from iphone.After few seconds 3G symbol disappears and WiFi symbol appears. After that I'm not able to access internet. Why is it so?

    SMS. Deggie, had them check that.  After a lengthy discussion with Senior Tech advisor, it appears it is iMessage/Face Time server (they are the same) issue, which will strong arm those into purchasing Data if they use iMessage over multiple devices, as the server registers the phone number associated with apple ID.  Not impressed. I put what I've learned here in a simliar thread
    https://discussions.apple.com/message/17416082#17416082
    and this is what I've put in apple.com/feedback
    "iMessage requires internet.  SMS does not.  iMessage/FaceTime auto logs phone numbers to the iMessage/Facetime  server (it's the same server as I've come to learn), this means that when iMessage/Face Time is turned on anyone sending a message through the server to me will only be sent as an iMessage- not when I'm not connected to internet, meaning I will not receive the message as an SMS by default, when I have another device using iMessage (such as MacBook) logged in.
    This feature is a problem for me, bottom line, in that iMessage strong arms the consumer (me) into having to buy a data plan that they either do not want, or do not need."

  • Not able to access weblogic console to other systems .

    Hi All,
    I am working on two project so I am using JDeveloper 11.1.1.4 and JDeveloper 11.1.1.7 .
    For my usage I provide different port no for web logic servers .
    11.1.1.4  version JDeveloper have the PortNO 7101 .
    11.1.1.7  version JDeveloper have the PortNO 9101 .
    In local I can Run the two Jdeveloper applications at the same time but
    My problem is  ,
    For testing I am able to access http://127.0.0.1:7101/console/login/LoginForm.jsp  URL to other systems .
    But I am not able to  access http://127.0.0.1:9101/console/login/LoginForm.jsp URL to other systems .
    In log it's showing ,
    <Logger> <error> ServletContainerAdapter manager not initialized correctly ..
    How to access different port no web-logic console to other systems ?
    Thanks ,
    David ..

    Hi All,
    I resolved my issue by following below steps ,
    Goto ->Weblogic Console ->Home ->Default Domain -->Control -->Default Server -->Remove the data from Listen Address field .
    Now I can using two JDeveloper with different web-logic port no and the target URL can access from other systems .
    Thanks ,
    David .

  • APEX application not able to access

    Hi all,
    I am new in APEX.
    and I have to create the same environment as the client have.
    client only given me sql for importing the application developed in APEX.
    I created workspace and imported the application in that. but the client is using the active directory authentication and now when i am trying to run the application at my environment then i am not able to access the application.
    So could any one of you please guide me what i need to do with the APEX to login to the application with my active directory authentications.
    this is somehow urgent and i am not able to get any help. so could anyone guide me.
    Sanket
    Edited by: user10528895 on Oct 28, 2010 10:46 PM

    Hi ajinkya,
    Thanks for forwording the helping hand.
    but can able to mannage and found some documentas of configuration of LDAP and using the LDAP authentication at my own. and now i configured the LDAP and able to access the application.
    now the next step i am stuch is the authentication is of 2 layer 1 i passed but next is there are some of the authorizations schems created and assigned to the specific users.
    now if i want to get the information of the authentications schems and where the data store then from where i get the information that is my question
    i am using database version 10g 10.2.0 and apex 3.0.1
    Regards,
    Sanket

Maybe you are looking for

  • Is this spam? What is iProtect?

    I keep recieving this text and it orginates from a China prefix followed by my own phone number--Verizon says it can't be blocked because it is international and they are costing me money. Is this spam? iProtect - Your sim status has changed, it may

  • What is idmManager view attribute to update manager in IDM

    We are on IDM6.0 sp1 and using User.waveset.idmManager attribute to update manager of a particular user. <set name='User.waveset.idmManager'> <ref>managerId</ref> </set> However I dont see these changes in IDM when I look the user. Also tried User.ac

  • Particular column numerical value unable to convert/transfer to excel

    Hi experts, Could any body help in my newly developed  ALV program where the required output is coming but one particular Numerical value column unable to export to excel. Apart from all the fields are exactly working and can do all the things. I am

  • Stretching space around photo

    I took a photo and got all the objects I wanted in it, but I would like to have a little more space around the photo, not a white border, just a little more space around the objects. Is there any way I can add more space around the photo just in case

  • Installing HP Deskjet 3510 Wireless Error Message

    I just purchased my HP Deskjet 3510 Wireless Printer today and I'm trying to install it on my Macbook so it will print wirelessly without the USB. I'm getting the follwing error messege and wondering how I can fix this? Any help?