Not able to access gmail folder

Have a new Mac Air.
As part of setup integrated with my gmail account.
gmails now come into Mac email.
However :
i) After some time emails in inbox are automatically transferred to Gmail Folder
ii) Gmail folder is visible but unable to access or see the content. Can just see the number of emails in the folder
Any ideas ?

Mail.app downloads all of your emails and stores them locally. It does not access them when you click on the folder.
If you have a lot of emails, it may take a good deal of time to initially sync them. I would let Mail.app run in the background for a day or two so that it has time to sync.
If that doesn't work, I would try deleting the Gmail account in settings and re-creating it.

Similar Messages

  • TS3899 Not able to access gmail thru iPhone. Error message states "mail server not accessible"

    Not able to access my Gmail in my iphone. Error message pops up
    "...... mail server not responding ........"

    Did this used to work or have you just set it up for Gmail access? Did you do it in accordance with: http://support.apple.com/kb/ht4810 ?
    Are you accessing it via cellular network or WiFi? If WiFi then is this your usual network?
    If it has been working fine for some time and now suddenly you get this message having changed nothing then it is most likely a temporary glitch at Google end or your ISP perhaps.

  • I am not able to access gmail. Error reading -The proxy server is refusing connections. Please help

    I get the attached error message when trying to access my gmail account "The proxy server is refusing connections. Firefox is configured to use a proxy server that is refusing connections. The problem started today. No issues before.
    Second problem although less of a concern - I am using Firefox 16.0.2.I tried to update to latest version and got the following message " ERROR The requested URL could not be retrieved"
    I can still access my gmail account though my IPAD

    hello, i've tried it with a fresh copy of a catalan firefox & it's showing up as expected for me...
    please try if it's the same when you launch firefox in safemode once (then it might be an issue with an extension hiding this setting) or else try a reset of firefox.
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
    [[Reset Firefox – easily fix most problems]]

  • Issue with only one distribution point not able to access only one folder wile PIXE boot

    I am facing problem only one distribution point not able to reach perticular folder through network access account, all other DP and other folder are working fine, I already verifiy share and security permission are in place, through <a href="file:///\\041TBVELCMS-001.xyz.ORG\SMSPKGE$\VEL000EA\">\\041TBVELCMS001.xyz.ORG\SMSPKGE$\VEL000EA\</a>&nbsp;
    i am able to reach from network, but while booting from system belongs to perticular DP, it stuck on below folder where fdisk.cmd files are uploded from primery server. pls check below logs and suggest what could be the actual issue.
    </p><p></p><p><spanlang="ENIN">Severity&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Type&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
    Site code&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Date / Time&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; System Component&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
    Message ID&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Description</span></p><p><span lang="EN-IN">Error&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Milestone&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
    CES&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 1/31/2014 12:32:11 PM&nbsp; MININT-L670NBC&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Task
    Sequence Engine&nbsp;&nbsp; 11135&nbsp;&nbsp;&nbsp; The task sequence execution engine failed executing the action (DiskPart DataDisk) in the group (Install Operating System) with the error code 2147942402&nbsp; Action output: T=80070047
    (e:\nts_sms_fre\sms\framework\tscore\tsconnection.cpp,148) Failed to access the share <a href="file:///\\041TBVELCMS-001.xyz.ORG\SMSPKGE$\VEL000EA\">\\041TBVELCMS-001.xyz.ORG\SMSPKGE$\VEL000EA\</a> with network access account !sAccessibleSource.empty(),
    HRESULT=80070002 (e:\nts_sms_fre\sms\framework\tscore\resolvesource.cpp,2392) GetAccessibleLocation(pszSource, saResolvedPath, sSourceDirectory, dwFlags, hUserToken), HRESULT=80070002 (e:... [Show more]

    The error 80070047 states a msg as "No more connections can be made to this remote computer at this time because there are already as many connection as the computer can accept." Check the share quota if at all any limitations has been provided, if not,
    try giving one.. Also, check if any enterprise policy has been applied for the share connections limitations..
    bluerail

  • Not able to access the web based RuleAuthor of Oracle Business Rules

    Hi ,
    I have Installed Oracle SOA Suite (11g) version from here .
    I have followed the steps in the Installation guide .
    I was able to install it successfully. At present I need to Work on the oracle Business Rules.
    As per the documentation I have tried to access the Rules author at the following URL
    http://localhost:7001/ruleauthor/
    But I was not able to access it.
    Please let me know if I need to install any other component to access Rule Author. please let me know if you need any more information.
    Thanks in advance for your time,
    Raja Kumar

    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
    Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ First Aid
    If the box marked Keep login keychain unlocked is not checked, check it.
    Select
    Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain. Quit Keychain Access.

  • The server principal "XYuser" is not able to access the database "Ydb" under the current security context

    SQL2005 on winserver 2003. I have a view in Xdb that accesses tables in 2 different databases (Xdb and Ydb) on the same server. I have mixed mode security. I have a SQL user (XYuser) that has read access to all tables and views on both databases, yet when I try to access the view using a C# windows application I get the following error:
    The server principal "XYuser" is not able to access the database "Ydb" under the current security context
    This same scenario works under SQL 2000. I looked through the postings and tried to set TRUSTWORTHY ON on both databases but that didn't help. I can access any other views or tables on the SQL 2005 server, just not the one that joins the tables cross databases. Any help is much appreciated... john

    This appears to be a Login/Database Mapping issue.  I was having this problem, but was able to resolve it as follows:
    Using the SQL Server management Studio:
    In the Object explorer, under the SERVER security folder (not the database security folder), expand Logins. 
    That is: ServerName -> Security -> Logins
    NOT: ServerName -> Databases -> DatabaseName -> Security -> Users
    Select the Login that is having the troubles.  Right click on the Login and select ‘Properties.’
    The ‘User Mapping’ page should list all databases on the server with a check mark on the databases that the Login has been mapped to.  When I was getting the error, the database in question was not checked (even though the Login was assigned as a User on the database itself).  Map the Login by checking the box next to the database name.  Set the default schema.  Then select the roles for the Login in the Database role membership list box.  I selected db_datareader and public.  After clicking OK to save the changes, the problem was resolved.
    In order to ‘Map’ the Login, the Login must not already be as User on the database, so you may have to go to the database security (ServerName -> Databases -> DatabaseName -> Security -> Users) and delete the Login from the list of database Users before mapping the Login to the database.

  • Custom Fault Policy java class is not able to access mediator.jar file

    Hi,
    I am trying to implement the custom java class for mediator fault handling. However when this class is invoked its not able to access the "oracle.tip.mediator.common.error.recovery.MediatorRecoveryContext" class during run time (which exists in mediator.jar). However its able to access all the other imported class files which exists in other library files.
    Do we need to add mediator.jar to the weblogic classpath manually or should we place that jar file in some location in the server ?? Its currently residing in the path -- /app/oracle/product/soastg/11.1.0/SOA/soa/modules/oracle.soa.mediator_11.1.1/mediator.jar. I tried to copy the same jar into domain lib and admin lib path but there was no luck.
    Any input on this will be helpful.
    Thanks,
    Ramesh

    Hi Ramesh,
    Try out the following
    1) Copy mediator.jar from SOA_HOME>/soa/modules/oracle.soa.mediator_11.1.1 to <MW_HOME>//soa/modules/oracle.soa.ext_11.1.1/classes
    2) Goto <MW_HOME>//soa/modules/oracle.soa.ext_11.1.1/classes and run the following command:
    a. jar -xvf mediator.jar
    3) Now remove the jar file, i.e., mediator.jar from classes folder.
    4) Restart the server.
    Regards,
    Srijith

  • I am not able to access any of my music.

    I am not able to access any of my music in my library.  It keeps saying could not be used because original file could not be found.  What next?

    The iTunes application doesn't actually contain your music, it points to a folder of music stored your computer.
    Did you recently update iTunes or "organize your music?" You might have to point iTunes at the music folder again or undo any changes that you made to the folder.
    Check out this document that Apple created -> No content shows up in iTunes after updating.
    WTH.

  • Should Clients be able to access Wsuscontent folder share?

    I was testing some MDT options for installing approved updates during the install task. One of the steps was to map to the WSUSContent folder on our wsus sever. Access was blocked by our firewall and the shares were not configured.
    That got me thinking. Do clients need to be able to access this folder share to download the updates from WSUS? Are my clients currently downloading from MS based upon the approvals?

    Do clients need to be able to access this folder share to download the updates from WSUS?
    Clients DO NOT download from the share directly; the download is done via an HTTP GET file transfer call to http://wsusServer/Content/pathNameToFile.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • APEX application not able to access

    Hi all,
    I am new in APEX.
    and I have to create the same environment as the client have.
    client only given me sql for importing the application developed in APEX.
    I created workspace and imported the application in that. but the client is using the active directory authentication and now when i am trying to run the application at my environment then i am not able to access the application.
    So could any one of you please guide me what i need to do with the APEX to login to the application with my active directory authentications.
    this is somehow urgent and i am not able to get any help. so could anyone guide me.
    Sanket
    Edited by: user10528895 on Oct 28, 2010 10:46 PM

    Hi ajinkya,
    Thanks for forwording the helping hand.
    but can able to mannage and found some documentas of configuration of LDAP and using the LDAP authentication at my own. and now i configured the LDAP and able to access the application.
    now the next step i am stuch is the authentication is of 2 layer 1 i passed but next is there are some of the authorizations schems created and assigned to the specific users.
    now if i want to get the information of the authentications schems and where the data store then from where i get the information that is my question
    i am using database version 10g 10.2.0 and apex 3.0.1
    Regards,
    Sanket

  • Sharepoint 2010 - Not able to access Sharepoint 2010 Public facing site on mobile browsers

    Hi All,
    Earlier, I posted a similar question in the forum , but did not get appropriate response . Posting it again with some more information .
    We are not able to access Sharepoint public facing site on Mobile browsers like chrome, IE, Safari (However the site is working fine on Firefox mobile browser and on PC/Laptops as well .)
    Following is the error we are getting :
     "Cannot set custom attribute on mobile controls in this page. Custom attributes specified are Access Key=0."
    I checked in the event logs , following was the exception :
    Exception captured in Exception HttpModule: System.Web.HttpException: Server cannot append header after HTTP headers have been sent.
       at System.Web.HttpResponse.set_RedirectLocation(String value)
       at Microsoft.SharePoint.Utilities.SPMobileUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String queryStrings)
       at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.HandleMobilePageRequest(HttpContext context)
       at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea)
       at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
       at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    Also, there was a microsoft OS security  patching on our farm servers post which the error starts coming . Following were the patches that were installed
    1. MS14-005          
    KB2916036          Security Update for Windows Server 2008 R2 x64
    Edition (KB2916036)
    MS14-009          
    KB2898857          Security Update for Microsoft .NET Framework 3.5.1
    2. on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
    (KB2898857)
    3. MS14-009          
    KB2901112          Security Update for Microsoft .NET Framework 3.5.1
    on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
    (KB2901112)
    4. MS14-009          
    KB2911501          Security Update for Microsoft .NET Framework 3.5.1
    on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
    (KB2911501)
    5. MS14-011          
    KB2909210          Security Update for Windows Server 2008 R2 x64
    Edition (KB2909210)
    6. MS14-012          
    KB2925418          Cumulative Security Update for Internet Explorer 8
    for Windows Server 2008 R2 x64 Edition (KB2925418)
    7. MS14-015          
    KB2930275          Security Update for Windows Server 2008 R2 x64
    Edition (KB2930275)
    8. MS14-016          
    KB2923392          Security Update for Windows Server 2008 R2 x64
    Edition (KB2923392)
    Has anyone of you ever faced similar(site not opening on mobile browsers) issue after installing these patches on farm servers .
    Any help would be much appreciated .
    Thanks
    Saquib Khan

    We have found below error related in ULS as well as event viewer both :
    Exception captured in Exception HttpModule: System.Web.HttpException: Server cannot append header after HTTP headers have been sent.   
     at System.Web.HttpResponse.set_RedirectLocation(String value)   
     at Microsoft.SharePoint.Utilities.SPMobileUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String
    queryStrings)   
     at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.HandleMobilePageRequest(HttpContext context)   
     at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea)   
     at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()   
     at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    Saquib Khan

  • User has contribute access but he is not able to access the site collection...

    User has contribute access but he is not able to access the site collection...

    What error does he get.
    Can you share fiddler trace(check if any 404 error)
    what error do we see in ULS Logs
    Create disableloopback
    registry on server
    http://support.microsoft.com/kb/926642/en-us

  • Not able to access blackberry world on Z10. what could be the reason?

    not able to access blackberry world on Z10. what could be the reason? It wasn't issue earlier but facing it from last two days.

    Please guys read other forums on this community before posting redundant issues.
    Try this fix
    Go to the games app.
    At the bottom tap on games.
    At the right bottom, you will notice three dots. Tap the dots
    Tap the option to enter the blackberry world. Wait until the screen is loaded
    Swipe right to Enter My World - > My Apps and Games.
    Tap the three dots again to check for updates.
    Update all the apps and close your App World.
    Try accessing the app world in the standard way. Everything mus be fixed by now.
    Twitter: @ukmight
    1. Click on the " Like " button if you find anything helpful posted.
    2. If any of the replies in your post has resolved your problem, mark the reply(ies) as " Solution ", so that others can readily view the solution instead of creating another redundant post.

  • Not able to access webservice after migrating from 8.1 to 10.3,plz help

    Hi All,
    Prev our application was running in weblogic 8.1 and now we moved to 10.3
    We are able to deploy our webservice in 10.3 and access the wsdl but we are not able to access the webservice from the client.
    Even the testclient is not comming up.
    After spending long time in that,now i dont have any clue on this issue.
    Plz help on this
    Thanks ni advance,
    Mouli

    Sunil,
    We are not seeing any exception.We regenerated the webservice and then deployed in the 10.3
    When we make req from the client ,we are getting null response but thing is there are no log trace in the server side for that
    folllowing is the input string we are pasing to the method notifyservice
    IN the client we pass the wsdl url and then pass the following input string and hit the notifySerivce method
    Req:
    <?xml version="1.0" encoding="UTF-8" standalone="no"?><object><GLCCode>102431</GLCCode><callBackNumber>888256798</callBackNumber></object>
    Res:
    <m:notifyService xmlns:m="http://www.testportal.com/outbound/tsp/WowWebservices">
    <result xsi:nil="true"/>
    </m:notifyservice>
    Therre was an exception in the client side,plz check below
    javax.xml.rpc.soap.SOAPFaultException: Failed to get operation name from incoming request
    at weblogic.webservice.core.ClientDispatcher.receive(ClientDispatcher.java:317)
    at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDispatcher.java:147)
    at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:473)
    at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:459)
    at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:569)
    at weblogic.webservice.core.rpc.CallImpl.invoke(CallImpl.java:422)
    Thanks For your time,
    Mouli

  • I am not able to access my photos through the photo application... when I click on the photo app, I can see the camera roll but a transparent album screen is over it and I cannot click on the photos to see it... can any one please help ???

    I am not able to access my photos through the photo application... when I click on the photo app, I can see the camera roll, but a transparent "album" screen is over it and I cannot click on the photos to see it... can any one please help ???

    Known bug.  Quit the Camera App, double-tap the home key and delete Camera from the recent apps bar. Fire it up again, should be good.

Maybe you are looking for