Not able to access home map on Mac from RDC

I'm using Mac OS X 10.9.4 MacBook Pro Retina and connect to a Windows 2003 SP2 Server, Stand alone, Terminal Server through MS RDC 8.0.7. I have configured the RDC to enable some of my folders on the Mac.
But as soon as I try to open or copy to my Mac folders trough the RDC client the client locks. Seems to be a bug that I can't access my Mac through RDC.

Hi,
How is the issue going now? Is there any update?
Thanks.
Jeremy Wu
TechNet Community Support

Similar Messages

Exchange 2010 mailbox not able to access auto-mapped Exchange 2013 CU3 mailbox

Hi,
We are in co-existence with Exchange 2010 SP3 and Exchange 2013 CU3.
Outlook Anywhere and Autodiscover pointed towards Exchange 2013 CAS servers. Everything works fine irrespective where is mailbox is located Exchange 2010 or 2013.
When I tried to access auto-mapped mailbox from Exchange 2010 as primary mailbox accessing auto-mapped Exchange 2013 mailbox "Cannot expand the folder. The set of folders cannot be opened. Microsoft Exchange is not available. Either there are network
problems or the Exchange server is down for maintenance".
Exchange 2013 OutlookAnywhere "Externalclientauthenticationmethod" is Basic and "Internalclientauthencitcationmethod" is NTLM. Everything is setup as per the Tech-net recommendations.
Checked both these articles but still it is not working:
http://support.microsoft.com/kb/2839517
http://support.microsoft.com/kb/2834139
Please let me know if there are any other ideas.
Raman

Hi,
I recommend you refer to the following articles to troubleshoot the issue:
Troubleshooting Mailbox Auto-Mapping : Autodiscover
Details about the shared mailbox that is to be accessed will be returned to the Outlook client by the autodiscover process. This is really handy to know if you are ever in the position where you need to troubleshoot why the auto-mapping feature isn’t working
correctly
Troubleshooting Mailbox Auto-Mapping : Permissions
When you use either the Exchange Management Console or the Exchange Management Shell to grant a user with full access permission against another mailbox, permissions changes are made to allow this as you might expect. Certain Active Directory attributes
are also updated to reflect both the Active Directory account of the mailbox being accessed as well as the Active Directory account of the accessing mailbox. Specifically, you can check the contents of the msExchDelegateListLink and msExchDelegateListBL Active
Directory attributes to see these details and it is worth checking these if you have any suspicions that things aren’t working correctly.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

HT2518 not able to access files on macbook air from windows pc

Dear All,
I have resorted to all the options. I want to access macfiles from windows PC. I trieds out all the options. I went to system preferences> selected "file sharing">selected the folder>selected the user name and password for windows account.
But when i click the macbook on the network from windows pc, it prompts me to enter user name and password. When i do the needful it says denied access. I tried to access macbook from two different windows PC one running XP and the other windows 7. The funny thing is that this access is sometimes allowed "say 10% of the time" using the user name and password and sometimes its not allowed.
Another interesting thing is that i am able to connect to windows PC from Macbook but not the reverse option. Somebody pl suggest a way out.
Regards
KMurthi

i have done all that. Both the systems are in the same "WORKGROUP" folders.
The peculiar thing is smtms i am able to access the contents of shared folder of Mac but most of the time after i enter d username n passwd the screen just gives the message connecting to......Can this be due to communication issues b/w Mac and windows operating systems. Anyways i am facing lot of problems because of this..Interestingly i can access windows folders easily through MACA system by clicking "GO" and then "CONNECT TO SERVER" path....
Pl let me knw if anyone has any clue on how to sort this issue.
Thanks for the earlier message

Not able to access the native c code from servlet

I want to call c function from servlet using JNI . I created the .so file and gave the library path . But when i try to load the library it says "Unsatisfied link error ". I am using tomcat on linux .. any more setting has to be done in order to call native code from servlets ?

You need to post a little bit of code. What does your LoadLibrary() call look like?

Not able to access the Database & Clusterware from OEM Console.

hi,
I had installed Oracle RAC 11g R2 in RHEL 5.3 Operating environment. I had installed my Oracle RAC with Enterprise Manager Console.
Its with the defailt port 1158. After the installation when i try to access my EM Console, i was not able to access the Database and Clusterware from EM Console.
When i access the EM console with url, I found with Startup and Perform Recovery option. But whereas my database is already startup and running.
So when i click startup its saying database is already started. Since it is a prodution environment i dont want to go with Perform recovery option.
Please tell me hw to attach files in this thread so that i can send the snap shot of the console for your reference.
with regards
A.Aravind
Edited by: 795847 on Sep 21, 2010 10:40 PM

hi,
As mentioned due to not having the default listener port 1521, we are facing this problem.
As meniotned i had changed the emoms.properties file and changed the port and my emctl page is opening.
But am not able to access the other parameters like ASM, Servers, Clusters etc bcoz since in some file it is looking for 1521 default port.
So is it better to go for emctl deconfig and config again or to change the port the files which required.
If i do in what are the file the default port will be located related to emctl.
with regards
A.Aravind

Not able to send files to my Mac via bluetooth.

Hey i have mac os x 10.5, i am not able to sen files to my mac from my blackberry 8520. I have paired my bb and mac but when i try to send files from my bb it says "Failed to find service".
Please help.
Thanks.

Hi
go to system preference
and go to sharing
enable blue tooth sharing
Hope it helps
LH

After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

I do not have a Mac but I want to give a software program for a Mac as a gift. I am not able to access the Mac store. Do I just get an iTunes card?

I do not have a Mac but I want to give a software program for a Mac as a gift. I am not able to access the Mac store. Do I just get an iTunes card?

"Gift Card" is sometimes called a tacky gift, but if it allows the other person to get whatever they want it works.
Besides, anything purchased through App Store is usually "All Sales Final", so I think iTunes card is a good idea.

HT1338 not able to access my external hd which i used on my windows pc ntfs3g and mac fuse aren't helping what to do?

not able to access my external hd which i used on my windows pc ntfs3g and mac fuse aren't helping what to do?

Bump-I still really need help with this! The connection keeps cutting in and out and I really don't know how to fix it!

I am not able to access my photos through the photo application... when I click on the photo app, I can see the camera roll but a transparent album screen is over it and I cannot click on the photos to see it... can any one please help ???

I am not able to access my photos through the photo application... when I click on the photo app, I can see the camera roll, but a transparent "album" screen is over it and I cannot click on the photos to see it... can any one please help ???

Known bug. Quit the Camera App, double-tap the home key and delete Camera from the recent apps bar. Fire it up again, should be good.

User has appropriate permission, still not able to access one of the sharepoint site applications.

Hi,
I have tried all solutions available on internet regarding this problem but none seems to work.
As per one solution I added the user in sharepoint site collection administrator group still no luck!
As per another solution I tried to run “User Profile Service Application Proxy – User Profile to SharePoint Full Synchronization”
“User Profile Service Application Proxy – User Profile to SharePoint Quick Synchronization”
but they dont run for some reason. Both these jobs are scheduled to run everyday but last time they ran was some date in 2011. When I click on Run Now nothing happens.
I deleted all cache, forms password history everything. Added the site in trusted sites and all. No luck!
User also tried to access the site by logging onto another system but still same issue.
This user recently joined alongwith a few more people. All of them are able to access the site except this particular user. So, a web part or unpublished page cant be the reason, right?
This user is only able to access the home page which is say http://<siteurl:1234> application while the site which this user is not able to access is
http://<siteurl:2345>.
I even tried to give access through sharepoint designer but no luck! Please help!
PS: This may not be relevant but still I'm sharing. Earlier I used to add users in manage user profiles - new profile. But now as soon as the user is added into active directory there profile is getting created automatically. This might be happening due to
active directory and user profile sync but the question is how? Because I dont remember configuring this. And it was not configured earlier too.

Hi,
According to your description, my understanding is that only one user cannot access the site even though he has the right permission.
I recommend to verify the things below:
Check the permission of the user in the site to see if the permission is right.
Is http://<siteurl:2345> a new site collection ? Can the user access other pages except the home page in
http://<siteurl:1234>?
Grant needed permission to the user in the web application to see if the issue still occurs.
Delete the user and re-add the user in AD to see if the issue still occurs.
Check the ULS log for detailed error message.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Not able to access human task form (11.1.1.4)

I installed SOA Suite with BPM Suite 11.1.1.4. I ran into quite a few issues. The biggest one is I am not able to access the human task form in BPM workspace even for the new application created in 11.1.14.
Do you have such issue? I am not sure if it is a bug or is related to my specific installation. I followed the document “Quick Start Guide for Oracle® SOA Suite 11gR1 (11.1.1.4.0) Version 1.6” for the installation. The only difference is that I installed the generic version of WebLogic and JDev and configured them to use JDK 64-bit version since my OS is windows 7 (64-bit). Before, I had installed 11.1.1.3 with 64-bit and it was working fine. The only tool installed with 32-bit is the JDev 11.1.1.3. Since JDev 11.1.1.4 is supporting 64-bit, I installed everything with 64-bit for this time.
The details of the error are the following:
With JDev 11.1.1.4, I created a new application which has a simple BPM process with 3 flow objects: start event-user activity-end event. The human task has the auto-generated task form. I deployed the application to the SOA server.
When testing the application, the task was created and listed in the BPM workspace. But when I clicked the task link to open the task form, the web page was hanging. I noticed the following log was REPEATED again and again in the access.log:
140.98.125.168 - - [20/Apr/2011:10:28:08 -0400] "GET /workflow/TestpsUI/faces/adf.task-flow?bpmWorklistTaskId=2a5b4ad1-823f-4615-8a7e-c5449a7be814&bpmWorklistContext=12aa4934-991a-487c-b7f3-5159808c399a%3B%3BtbcZXSd1E1LVZv8OIaLZGd21meLUMNkYSMsmz60kNKoEaJ1N53wy3zyRYA%2BunyKF9UNi50fPHKtaXY6IqKbh%2Fu68WebTan3zCwGsUNmNMaw8aLEygS5qb2cOGx2qGal86F%2FgiRka874PYLXhohFdDPCQyoxre2p7IgpsloLHq2rh7T3zWGnyOjLdC7Qw0Geb20Kfp8XA2UUIoxaxTHS6YFPQqqs%2FzIkyEsgMNQJMDbYYGdceRL2sT8rMkBXpmQ0r&bpmWorklistHttpURL=http%3A%2F%2Flocalhost%3A7001%2Fbpm%2Fworkspace%2Ffaces&bpmWorklistHome=home.jspx&bpmWorklistReassign=reassignTask.jspx&bpmWorklistRoute=routeTask.jspx&bpmWorklistRequestInfo=requestInfo.jspx&bpmWorklistSecurity=signTask.jspx&tz=America%2FNew_York&lg=en&cy=US&vr=&dispNameLg=en&dispNameCy=US&dispNameVr=&df=medium&dt=both&tf=short&bpmWorklistSessionTimeoutInterval=900&soaUrl=http%3A%2F%2F140.98.125.168%3A7001&bpmBrowserWindowStatus=taskFlowReturn&adf.tfDoc=%2FWEB-INF%2FHumantask_TaskFlow.xml&adf.tfId=Humantask_TaskFlow&_task-flow-return=http%3A%2F%2Flocalhost%3A7001%2Fbpm%2Fworkspace%2Ffaces%2Fadf.task-flow-return%3F_adf.ctrl-state%3De1i6yi1gq_35&_adf.winId=e1i6yi1gq_26&_afrLoop=7156779026094&_afrWindowMode=0&_afrWindowId=null HTTP/1.1" 200 5478
Please help if you know what is going on for the issue.
Thanks a lot,
Helen

Go to OEM, select the SOA Composite application you deployed.
Under Component Metrics … click the link of the Human Workflow Component that you have the issue
The settings of the Human Workflow Component would be displayed
Click the Administration tab, you will get the URI setting for the human task
update the Host name etc. as you want and click "OK" then click "Apply"
Please note: this is just a shortcut for my own dev-env. I have not got the time to figure out why this happens. It is sure not the right solution for the production if we have the issue in the prod-env, I think.

I am not able to access the sharepoint:80 site using the local IP address.

I am able to access the Central administration using the Local LAN IP address and the port number, but, I am not able to access the sharepoint:80 site using the same local IP address without the port for the central administration. I tried adding
the local IP address in the Alternative Access Mapping to no avail. Any ideas, where I should look, is much appreciated.

Hi，
By my test, I set the Alternative Access Mapping for the SharePoint 80 port web application as below and it works fine:
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

The server principal "XYuser" is not able to access the database "Ydb" under the current security context

SQL2005 on winserver 2003. I have a view in Xdb that accesses tables in 2 different databases (Xdb and Ydb) on the same server. I have mixed mode security. I have a SQL user (XYuser) that has read access to all tables and views on both databases, yet when I try to access the view using a C# windows application I get the following error:
The server principal "XYuser" is not able to access the database "Ydb" under the current security context
This same scenario works under SQL 2000. I looked through the postings and tried to set TRUSTWORTHY ON on both databases but that didn't help. I can access any other views or tables on the SQL 2005 server, just not the one that joins the tables cross databases. Any help is much appreciated... john

This appears to be a Login/Database Mapping issue. I was having this problem, but was able to resolve it as follows:
Using the SQL Server management Studio:
In the Object explorer, under the SERVER security folder (not the database security folder), expand Logins.
That is: ServerName -> Security -> Logins
NOT: ServerName -> Databases -> DatabaseName -> Security -> Users
Select the Login that is having the troubles. Right click on the Login and select ‘Properties.’
The ‘User Mapping’ page should list all databases on the server with a check mark on the databases that the Login has been mapped to. When I was getting the error, the database in question was not checked (even though the Login was assigned as a User on the database itself). Map the Login by checking the box next to the database name. Set the default schema. Then select the roles for the Login in the Database role membership list box. I selected db_datareader and public. After clicking OK to save the changes, the problem was resolved.
In order to ‘Map’ the Login, the Login must not already be as User on the database, so you may have to go to the database security (ServerName -> Databases -> DatabaseName -> Security -> Users) and delete the Login from the list of database Users before mapping the Login to the database.

Not able to access home map on Mac from RDC

Similar Messages

Maybe you are looking for