Not able to access Microsoft web sites

Hi!
We cannot only access Microsoft Websites through ISA 2006 on web proxy clients and even on ISA itself. We disabled all the rules but still cannot access. ISA server cannot access Microsoft websites even if we use direct connection to internet without using
proxy.
Any Suggestions?
Thanks.

Hi,
In addition, have you received any error messages? Firstly, I recommend you to ping the website or nsloookup the website?
Please make sure that those websites are not added
in restricted sites on your browser or you can change a browser to see if the issue persists.
Best regards,
Susie

Similar Messages

  • Not able to access secure  web sites

    I have a satelite modem that connects via WAN port to my Airport Extreme which then is connected via LAN port to Netgear ethernet card on my PC. After just getting the broadband last week, I noticed that I cannot access certain secure sites such as my bank or american express site on my PC but I can do it via wireless from my PowerBook G4. When I bypass the Airport extreme and connect the modem directly to the PC ethernet card, I can then acess the secure sites on my PC.
    Can some please help to solve this so that I can acess the secure sites on my PC as well when using the Airport Extreme?
    After taking to tech supprot at the Hughes.net they say that the router is somehow blocking the sites into the PC- something about a MTU or something like that?
    Thanks for your help
    Faltu1

    Thanks Duane for your prompt reply.
    My knowlede of computers in very shameful. I am not aware of any software on the PC that has the wireless port more restricted. All I have is the AVG free Anit-virus and the Free Microsoft Fire Wall installed.
    If it is a software blocking the ports; how can find out which one it is and what can be done to fix it.
    Are there some settings on the AEBS that can be adjusted for it to communicate better with the PC to all the sites to pass through.
    I did find some thing on the appple web site about restricted website but I don't understand what it means and wether it really applies to my situation. See below:
    Restricted address ranges
    Using AirPort Admin Utility or AirPort Utility, check the "Public" or "WAN" IP address. If this address starts with a "10" or "192", your ISP is using restricted address ranges. This may affect the ability of the base station to share the Internet connection among computers. If you have difficulty connecting to some websites when the base station has a public IP address beginning with 10 or 192, use AirPort Admin Utility or AirPort Utility to turn off connection sharing for the base station. Only one computer will be able to connect through the base station. If you have a broadband modem, you may need to unplug its power supply for a few seconds to reset it. If that resolves your issue, contact your Internet service provider. In this configuration the base station is serving as a wireless bridge between your computer and the ISP, rather than as a wireless router. To connect more than one computer, your ISP would need to assign additional IP addresses to your account.
    Thanks for your help again.

  • BO 4.1 LCM not able to access through Web Browser

    Hello Folks,
    I installed BO 4.1 in my Vmware workstation 10. successfully. its working fine all tools and web based tools like CMC and BI launch pad.
    I have problem while connecting to LCM through below link.
    localhost:8080/BOE/LCM
    Once i get hit this link on google crome browser I'm getting below error. Please anyone suggest me how to access LCM in my local server.
    404 Missing Page
    The page you requested is not available on this web server for one of the following reasons:
    The address you typed may be inaccurate. For example, a character was missing. To correct this issue, double-check the address and make sure that it is spelled correctly.
    If you clicked on a link or button, the web application that generates this link may be experiencing a temporary problem. Close and restart your browser and try the link again at a later time.
    After verifying that the error is not the result of a bad address or web application problem, perhaps the page you tried to access may no long exist or can not be generated. Report this problem to the webmaster or the administrator.If you are the webmaster or the administrator of this web server, refer to the SAP BusinessObjects FAQ page regarding HTTP errors for more suggestions.
    If the problem still persists, please:
    Search the SAP BusinessObjects Knowledge Base Articles for similar cases.
    Contact with SAP BusinessObjects Customer Support.
    Thanks
    venkat

    Hello Jawahar,
    Thanks for your reply.
    Your right from 4.0 its a Promotion Management activity with LCM.
    Here my question is I'm not able to Access LCM thorogh Localhost:8080/BOE/LCM.
    Please anyone help me how to do rectify this.
    Thanks
    venkat

  • Not able to access the web based RuleAuthor of Oracle Business Rules

    Hi ,
    I have Installed Oracle SOA Suite (11g) version from here .
    I have followed the steps in the Installation guide .
    I was able to install it successfully. At present I need to Work on the oracle Business Rules.
    As per the documentation I have tried to access the Rules author at the following URL
    http://localhost:7001/ruleauthor/
    But I was not able to access it.
    Please let me know if I need to install any other component to access Rule Author. please let me know if you need any more information.
    Thanks in advance for your time,
    Raja Kumar

    Back up all data.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
    If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
    Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
    From the menu bar, select
    Keychain Access ▹ Preferences ▹ First Aid
    If the box marked Keep login keychain unlocked is not checked, check it.
    Select
    Keychain Access ▹ Keychain First Aid
    from the menu bar and repair the keychain. Quit Keychain Access.

  • Not able to access SOAP web service data control from adf mobile

    Hi,
    I am trying to call web services from adf mobile..
    I have created data control from external web service and it is perfectlly working on web browser..
    But why it is showing an error on emulator??
    Is there any .jar file missing in adf mobile so that it is not supporting a web service?
    Or is there any other problem? Emulator is connected to network and I am able to run WSDL in emulator's browser..
    Please help me to solve this issue..
    Thanks,
    Laxmi

    Emulator is connected to network and I am able to run WSDL in emulator's browser..
    Connecting to WSDL in the browser is not the same as connecting to WSDL in an application.
    To access a web service from an Android device enable a permission in AndroidManifest.xml that allows applications to open network sockets. Add the following uses-permission element.
    <uses-permission android:name="android.permission.INTERNET"></uses-permission>

  • I am not able to open any web site. I get an "Unable to load page" message.

    Firefox crashed last night. When I tried to reopen, it gives me "unable to load page" error. I tried several websites and same message. I removed firefox and re-downloaded it. Same thing.

    Still not able to open sites.

  • Sharepoint 2010 - Not able to access Sharepoint 2010 Public facing site on mobile browsers

    Hi All,
    Earlier, I posted a similar question in the forum , but did not get appropriate response . Posting it again with some more information .
    We are not able to access Sharepoint public facing site on Mobile browsers like chrome, IE, Safari (However the site is working fine on Firefox mobile browser and on PC/Laptops as well .)
    Following is the error we are getting :
     "Cannot set custom attribute on mobile controls in this page. Custom attributes specified are Access Key=0."
    I checked in the event logs , following was the exception :
    Exception captured in Exception HttpModule: System.Web.HttpException: Server cannot append header after HTTP headers have been sent.
       at System.Web.HttpResponse.set_RedirectLocation(String value)
       at Microsoft.SharePoint.Utilities.SPMobileUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String queryStrings)
       at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.HandleMobilePageRequest(HttpContext context)
       at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea)
       at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
       at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    Also, there was a microsoft OS security  patching on our farm servers post which the error starts coming . Following were the patches that were installed
    1. MS14-005          
    KB2916036          Security Update for Windows Server 2008 R2 x64
    Edition (KB2916036)
    MS14-009          
    KB2898857          Security Update for Microsoft .NET Framework 3.5.1
    2. on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
    (KB2898857)
    3. MS14-009          
    KB2901112          Security Update for Microsoft .NET Framework 3.5.1
    on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
    (KB2901112)
    4. MS14-009          
    KB2911501          Security Update for Microsoft .NET Framework 3.5.1
    on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
    (KB2911501)
    5. MS14-011          
    KB2909210          Security Update for Windows Server 2008 R2 x64
    Edition (KB2909210)
    6. MS14-012          
    KB2925418          Cumulative Security Update for Internet Explorer 8
    for Windows Server 2008 R2 x64 Edition (KB2925418)
    7. MS14-015          
    KB2930275          Security Update for Windows Server 2008 R2 x64
    Edition (KB2930275)
    8. MS14-016          
    KB2923392          Security Update for Windows Server 2008 R2 x64
    Edition (KB2923392)
    Has anyone of you ever faced similar(site not opening on mobile browsers) issue after installing these patches on farm servers .
    Any help would be much appreciated .
    Thanks
    Saquib Khan

    We have found below error related in ULS as well as event viewer both :
    Exception captured in Exception HttpModule: System.Web.HttpException: Server cannot append header after HTTP headers have been sent.   
     at System.Web.HttpResponse.set_RedirectLocation(String value)   
     at Microsoft.SharePoint.Utilities.SPMobileUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String
    queryStrings)   
     at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.HandleMobilePageRequest(HttpContext context)   
     at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea)   
     at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()   
     at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
    Saquib Khan

  • User has contribute access but he is not able to access the site collection...

    User has contribute access but he is not able to access the site collection...

    What error does he get.
    Can you share fiddler trace(check if any 404 error)
    what error do we see in ULS Logs
    Create disableloopback
    registry on server
    http://support.microsoft.com/kb/926642/en-us

  • User has appropriate permission, still not able to access one of the sharepoint site applications.

    Hi,
    I have tried all solutions available on internet regarding this problem but none seems to work.
    As per one solution I added the user in sharepoint site collection administrator group still no luck!
    As per another solution  I tried to run “User Profile Service Application Proxy – User Profile to SharePoint Full Synchronization”
    “User Profile Service Application Proxy – User Profile to SharePoint Quick Synchronization”
    but they dont run for some reason. Both these jobs are scheduled to run everyday but last time they ran was some date in 2011. When I click on Run Now nothing happens.
    I deleted all cache, forms password history everything.  Added the site in trusted sites and all. No luck!
    User also tried to access the site by logging onto another system but still same issue.
    This user recently joined alongwith a few more people. All of them are able to access the site except this particular user. So, a web part or unpublished page cant be the reason, right?
    This user is only able to access the home page which is say http://<siteurl:1234> application while the site which this user is not able to access is
    http://<siteurl:2345>.
    I even tried to give access through sharepoint designer but no luck! Please help!
    PS: This may not be relevant but still I'm sharing. Earlier I used to add users in manage user profiles - new profile. But now as soon as the user is added into active directory there profile is getting created automatically. This might be happening due to
    active directory and user profile sync but the question is how? Because I dont remember configuring this. And it was not configured earlier too.

    Hi,
    According to your description, my understanding is that only one user cannot access the site even though he has the right permission.
    I recommend to verify the things below:
    Check the permission of the user in the site to see if the permission is right.
    Is http://<siteurl:2345> a new site collection ? Can the user access other pages except the home page in
    http://<siteurl:1234>?
    Grant needed permission to the user in the web application to see if the issue still occurs.
    Delete the user and re-add the user in AD to see if the issue still occurs.
    Check the ULS log for detailed error message.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • I am not able to access the sharepoint:80 site using the local IP address.

     I am able to access the Central administration using the Local LAN IP address and the port number, but, I am not able to access the sharepoint:80 site using the same local IP address without the port for the central administration. I tried adding
    the local IP address in the Alternative Access Mapping to no avail. Any ideas, where I should look, is much appreciated.

    Hi，
    By my test, I set the Alternative Access Mapping for the SharePoint 80 port web application as below and it works fine:
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Eric Tao
    TechNet Community Support

  • WRT51AB - Not able to connect to one site when accessing thro router

    When I am trying to access a particluar website directly via cable modem using ethernet cable, I am able to access the website. However if I connect the wireless router to the modem and then try to access the website using wireless connection, I am not able to access the site.
    Any ideas?
    Any help will be appreciated.
    Thanks
    Sonia

    Are you able to go online using wireless router?? Logon to router’s setup page and try changing wireless channel to 11, go to advanced wireless settings and reduce beacon interval to 50, reduce fragmentation and RTS threshold to 40 by each, try upgrading latest firmware on the router… also let me know which web sites you are trying to access?? Is it secured websites?

  • Not able to access meeting place 6.0 through Web browser

    Meeting Place version : 6.0
    Issue : Not able to access meeting place through a web browser
    Getting errors regarding database in eventviewer.

    Also, if you reset the "sa" password in Microsoft SQL Server, you will want to reset it in MeetingPlace. Do this by going to the desktop of the Web Server(s), then double click on the orange door on the bottom right, click on the Web Conferencing tab, and re-entering the "sa" password for both the Database Connection and the Slave Database Connection if both are showing.
    Then you may need to restart the "Cisco Unified MeetingPlace Web Conferencing" service.
    If this still does not work, you can open a SQL Server tool such as Enterprise Manager or Query Analyzer and try to connect to the SQL server using the "sa" credentials.
    Regards,
    Andrew

  • Not able to access the multi-source universe in WebI

    Hi
    I am not able to access the multi-source universe in WebI, getting below error message.
    [Data Federator Driver] Unexpected exception: com.crystaldecisions.thirdparty.org.omg.CORBA.UNKNOWN: null | [Data Federator Driver] Failed to connect to any of the provided 'Central Management Server' hosts.
    And also Not able to perform anything to designing multi-source universe in business Layer.
    Universe back-end is
    Oracle 11g and
    SQL2008 DB
    Version IDT: 4.1 Support Pack 2
    SAP BusinessObjects BI Platform 4.1 Support Pack 2,

    Hi Sreeni,
    You can create a new APS in CMC containing the Data Federation Service with
    -Xmx2g -> 8g (This is the suggested range)
    Make sure you remove this service from the existing APS and then create a new one.
    You could refer SAP KBA 1694041 - BI 4.x Consulting:- How to size the Adaptive Processing
    Server (APS) which would assist you in sizing the APS.
    Regards,
    Manpreet

  • I'm not able to access the thumbnails of my open web pages. Why?

    I'm not able to access the thumbnails of my open web pages. Why?

    Oh ok, that explains it. Thank you so much. I'm still getting use to my ipad2. I've only had it for about three weeks

  • Not able to access Site logo from layout and css After removing all the permission from site

    Hi Techis,
    I have stucked here, actually I have removed permissions from all the users from the site and after sometime I got the mails from client that they are not able to access the Site logo and css in the site.
    When I logged from Farm account and checked I can see everything working fine.Also the masterpage and all are checked in
    I am not getting whats the exact issue.I stucked here from last one day Please help me to solve this issue.
    Thanks Regards,
    Simanchal

    Hello,
    Is it the publishing site? If so then go to site permission and provide permission to "NT AUTHORITY\authenticated users" to "Style Resource Readers" group.
    You also need to make sure that "style library" is inheriting permission from parent otherwise you need to give at least read permission to library for all users. To verify this, just open view all site content page-->then click on style library,then
    check permission.
    Let us know your result
    Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Maybe you are looking for