Not able to access OAM 11g Console

Hi,
We have OAM 11g environment. Initially we are able to login to oamconsole using "weblogic" user. We changed user store to OVD then onwards we are not able to login to console.
Thanks

Hi,
As GK says, you should just be able to add the user to the group that is defined in the "OAM Administrator's Role" in the OVD identity store that you have defined - could you verify that the user you are logging in as is a member of this group, and that the group's cn attribute value matches what you have defined in the user store.
What symptoms are you seeing - for example,are you being successfully authenticated but getting denied access to /oamconsole, or are you getting double-prompted for login?
Regards,
Colin

Similar Messages

Not able to access OAM

Hi Gurus,
I trying to access am access OAM on
http://drpatsdb02.rpadev.com:<port>/servlet/weboam/oam/oamlogin
but it gives me below error message..
"The Single Sign-On server registration is invalid. Please contact the System Administrator."
I am able to access portal thru single sine on ;; ;kindly guide if we are missing some config setting needed for OAM
Regards

Just the normal one:
Installing Oracle Application Server 10g with Oracle E-Business Suite Release 11i
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=233436.1
Log in through SSO, click on System Administrator, then Dashboard under Oracle Applications Manager.
You should be able to shutdown apache, deregister, reregister, start apache, then access OAM directly once passing your SSO credentials via the logon URL you originally posted. I verified this does work on 10.1.2.0.2 OAS.

Not able to access the Administrator Console 7001

Dear all,
We have installed weblogic server 11.1.2 in Aix 6.1.
Installation faced lot of FIXER problems finally we fixed all the required fixers and installation and configuration compleated without any error.
In the last page of Configuration summary we got the Admin consloe and Em console address.
When i try to connect those from my system using IE it says "internet explorer cannot Display the webpage" error comes.
While on Installation we used Humming bird for graphical installation[this is the first time am using this utlity]. And more over i do not have idea how to check about the admin server start and stop from the back end[AIX].
Kindly help me how to access the Administrator Console after Installation
"Administrator Console: http://emar:7001/console"
Exepecting all expects advice and guidance.
Regards,
Paja

Hi Paja,
Please check any weblogic process are running by using.
ps -ef | grep java
use " *kill -9 < pid >* "
Now under %Domain_Home%/ bin folder.
you will find startWebLogic.sh file.
start this one using following way.
./startWebLogic.sh
Once you provide your username and password
Check your last logging like this.
*<Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.17.62.212:7001 for protocols iiop, t3, ldap, s*
in this case 10.17.62.212 is my IP address or listen address and 7001 is my http port.
if you enable SSL list port it will also show you that one.
now try to access console using http://<IP address>:port/console
provide username and password
Here we go to start your weblogic server.
Now in %Domain_Home%/ bin folder you will find one more .sh file says stopWebLogic.sh.
this will help you to stop the server.
Hope this is easy way to start and stop your server.
Regards,
kal

Not able to access the Database & Clusterware from OEM Console.

hi,
I had installed Oracle RAC 11g R2 in RHEL 5.3 Operating environment. I had installed my Oracle RAC with Enterprise Manager Console.
Its with the defailt port 1158. After the installation when i try to access my EM Console, i was not able to access the Database and Clusterware from EM Console.
When i access the EM console with url, I found with Startup and Perform Recovery option. But whereas my database is already startup and running.
So when i click startup its saying database is already started. Since it is a prodution environment i dont want to go with Perform recovery option.
Please tell me hw to attach files in this thread so that i can send the snap shot of the console for your reference.
with regards
A.Aravind
Edited by: 795847 on Sep 21, 2010 10:40 PM

hi,
As mentioned due to not having the default listener port 1521, we are facing this problem.
As meniotned i had changed the emoms.properties file and changed the port and my emctl page is opening.
But am not able to access the other parameters like ASM, Servers, Clusters etc bcoz since in some file it is looking for 1521 default port.
So is it better to go for emctl deconfig and config again or to change the port the files which required.
If i do in what are the file the default port will be located related to emctl.
with regards
A.Aravind

Not able to access CAS service through Endeca workbench: getting an error "CAS Console must be accessed through Workbench"

Getting an error while accessing the Datasource tab through Endeca workbench "CAS Console must be accessed through Workbench". Verified both ws-extensions.xml and casconsole.properties files which exists under %ENDECA_TOOLS_CONF%/conf, both files shares the same sharedSecret. Do anybody knows how to resolve this issue.
I did tried to reinstall CAS component multiple time , all the time the same error throwing.
Endeca CAS service is also not able to start through microsoft console (services.msc) throwing an error " Windows could not start the Endeca CAS Service service on Local Computer"

This can occur if CAS is reinstalled. Check your ws-extensions.xml and casconsole.properties files, and ensure that they agree on the same shared-secret.
Best
Brett

Not able to access weblogic console to other systems .

Hi All,
I am working on two project so I am using JDeveloper 11.1.1.4 and JDeveloper 11.1.1.7 .
For my usage I provide different port no for web logic servers .
11.1.1.4 version JDeveloper have the PortNO 7101 .
11.1.1.7 version JDeveloper have the PortNO 9101 .
In local I can Run the two Jdeveloper applications at the same time but
My problem is ,
For testing I am able to access http://127.0.0.1:7101/console/login/LoginForm.jsp URL to other systems .
But I am not able to access http://127.0.0.1:9101/console/login/LoginForm.jsp URL to other systems .
In log it's showing ,
<Logger> <error> ServletContainerAdapter manager not initialized correctly ..
How to access different port no web-logic console to other systems ?
Thanks ,
David ..

Hi All,
I resolved my issue by following below steps ,
Goto ->Weblogic Console ->Home ->Default Domain -->Control -->Default Server -->Remove the data from Listen Address field .
Now I can using two JDeveloper with different web-logic port no and the target URL can access from other systems .
Thanks ,
David .

Exchange management console not able to access after rename the administrative AD account

I had an administrative user account(AD Admin a/c) KXP004 that
recently rename as RPS001
The account which was working fine before renaming and was able to access the exchange console. Since I rename the account, everything is working fine except the exchange management
console.
When trying to access the EX Management console displays an error message saying it cannot find the new name. What can we do to make the exchange management
console work for the renamed account? Please assist.

Hi Sherieftkl,
After renaming the administrator account in AD, did you log off and then log on by using the new administrator name? Please log on again and monitor the result.
In addition, please also open Event Viewer and check if find some related events.
-->Since I rename the account, everything is working fine except the exchange management console.
By the way, if this issue just occurred for EMC, I also suggest that you should post the question in
Exchange Forum. I believe we will get a better assistance there.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Not able to access the multi-source universe in WebI

Hi
I am not able to access the multi-source universe in WebI, getting below error message.
[Data Federator Driver] Unexpected exception: com.crystaldecisions.thirdparty.org.omg.CORBA.UNKNOWN: null | [Data Federator Driver] Failed to connect to any of the provided 'Central Management Server' hosts.
And also Not able to perform anything to designing multi-source universe in business Layer.
Universe back-end is
Oracle 11g and
SQL2008 DB
Version IDT: 4.1 Support Pack 2
SAP BusinessObjects BI Platform 4.1 Support Pack 2,

Hi Sreeni,
You can create a new APS in CMC containing the Data Federation Service with
-Xmx2g -> 8g (This is the suggested range)
Make sure you remove this service from the existing APS and then create a new one.
You could refer SAP KBA 1694041 - BI 4.x Consulting:- How to size the Adaptive Processing
Server (APS) which would assist you in sizing the APS.
Regards,
Manpreet

Not able to access the web based RuleAuthor of Oracle Business Rules

Hi ,
I have Installed Oracle SOA Suite (11g) version from here .
I have followed the steps in the Installation guide .
I was able to install it successfully. At present I need to Work on the oracle Business Rules.
As per the documentation I have tried to access the Rules author at the following URL
http://localhost:7001/ruleauthor/
But I was not able to access it.
Please let me know if I need to install any other component to access Rule Author. please let me know if you need any more information.
Thanks in advance for your time,
Raja Kumar

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

Not able to login to weblogic console.

Hi,
I am trying to login to weblogic console, but it is failing with error message as follow:
*"Page not found*
The server has not found anything matching the Request-URI. "_
Previous it was fine i was able to login to the weblogic console without any issue, but suddenly this problem start apearing.
Please can somebody help me on this issue.
Thanks,
Manoj

Hi Ravi,
This is the config file sample. Please have a look to this.
<server>
<name>AdminServer</name>
<ssl>
<name>AdminServer</name>
<enabled>true</enabled>
<hostname-verification-ignored>true</hostname-verification-ignored>
<listen-port>9002</listen-port>
<login-timeout-millis>25000</login-timeout-millis>
<two-way-ssl-enabled>true</two-way-ssl-enabled>
</ssl>
<log>
<name>AdminServer</name>
<file-min-size>50000</file-min-size>
<rotate-log-on-startup>true</rotate-log-on-startup>
<log-file-severity>Info</log-file-severity>
<stdout-severity>Info</stdout-severity>
<memory-buffer-severity>Notice</memory-buffer-severity>
<log4j-logging-enabled>false</log4j-logging-enabled>
<redirect-stdout-to-server-log-enabled>true</redirect-stdout-to-server-log-enabled>
</log>
<stuck-thread-max-time>2400</stuck-thread-max-time>
<stuck-thread-timer-interval>180</stuck-thread-timer-interval>
<listen-port>9001</listen-port>
<web-server>
<name>AdminServer</name>
<frontend-https-port>443</frontend-https-port>
<auth-cookie-enabled>false</auth-cookie-enabled>
</web-server>
<listen-address>-------</listen-address>
<tunneling-enabled>true</tunneling-enabled>
<staging-directory-name>/apps2/bcawl10/applications_on</staging-directory-name>
<staging-mode>nostage</staging-mode>
<health-check-timeout-seconds>120</health-check-timeout-seconds>
<graceful-shutdown-timeout>60</graceful-shutdown-timeout>
<ignore-sessions-during-shutdown>true</ignore-sessions-during-shutdown>
<client-cert-proxy-enabled>true</client-cert-proxy-enabled>
<weblogic-plugin-enabled>true</weblogic-plugin-enabled>
</server>
I am accessing the console from a different windows machine while the admin server is configure on different unix box.
http://host_IP:9001/console is the url i am using to access the console.
As this is the production environment so we do not have permission or flexibility to create the new domains.
and for your previous post i did search for the files on the DemoIdentity.jks, DemoTrust.jks and wsrpKeystore.jks.
I am able to file the files at
/apps/bea/software/bea1001/wlserver_10.0/server/lib/DemoTrust.jks
/apps/bea/software/bea1001/wlserver_10.0/server/lib/DemoTrust.jks
/bea/software/bea1001/wlserver_10.0/samples/domains/portal/wsrpKeystore.jks
and i can see from the console that all the instance point to the same path mentioned above under KeyStore setting of weblogic console.
One more point i want to add is that console is accessible for few of the users what few of them are not able to access intermittently. So if you know then please could you put some input from the network prospective whether firewall setting can play role in in this or not.
Thanks,
Manoj Kumar

Not able to copy-paste java console logs

I am able to copy paste the applet's java console logs from with our network.
but when i access the same applet from outside (internet), I am not able to copy-paste the console logs!
Seems weird but it is true
The console appears fine with log statements, i am not able to copy-paste when accessing through internet.
Environment: IE 6.0 and JRE 1.4.2
Any hints?
thanks

You probibly have differences in the machines you are using.
I have not had a problem cut/pasting in the situation you suggest.

APEX application not able to access

Hi all,
I am new in APEX.
and I have to create the same environment as the client have.
client only given me sql for importing the application developed in APEX.
I created workspace and imported the application in that. but the client is using the active directory authentication and now when i am trying to run the application at my environment then i am not able to access the application.
So could any one of you please guide me what i need to do with the APEX to login to the application with my active directory authentications.
this is somehow urgent and i am not able to get any help. so could anyone guide me.
Sanket
Edited by: user10528895 on Oct 28, 2010 10:46 PM

Hi ajinkya,
Thanks for forwording the helping hand.
but can able to mannage and found some documentas of configuration of LDAP and using the LDAP authentication at my own. and now i configured the LDAP and able to access the application.
now the next step i am stuch is the authentication is of 2 layer 1 i passed but next is there are some of the authorizations schems created and assigned to the specific users.
now if i want to get the information of the authentications schems and where the data store then from where i get the information that is my question
i am using database version 10g 10.2.0 and apex 3.0.1
Regards,
Sanket

Sharepoint 2010 - Not able to access Sharepoint 2010 Public facing site on mobile browsers

Hi All,
Earlier, I posted a similar question in the forum , but did not get appropriate response . Posting it again with some more information .
We are not able to access Sharepoint public facing site on Mobile browsers like chrome, IE, Safari (However the site is working fine on Firefox mobile browser and on PC/Laptops as well .)
Following is the error we are getting :
"Cannot set custom attribute on mobile controls in this page. Custom attributes specified are Access Key=0."
I checked in the event logs , following was the exception :
Exception captured in Exception HttpModule: System.Web.HttpException: Server cannot append header after HTTP headers have been sent.
   at System.Web.HttpResponse.set_RedirectLocation(String value)
   at Microsoft.SharePoint.Utilities.SPMobileUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String queryStrings)
   at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.HandleMobilePageRequest(HttpContext context)
   at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea)
   at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Also, there was a microsoft OS security patching on our farm servers post which the error starts coming . Following were the patches that were installed
1. MS14-005
KB2916036          Security Update for Windows Server 2008 R2 x64
Edition (KB2916036)
MS14-009
KB2898857          Security Update for Microsoft .NET Framework 3.5.1
2. on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
(KB2898857)
3. MS14-009
KB2901112          Security Update for Microsoft .NET Framework 3.5.1
on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
(KB2901112)
4. MS14-009
KB2911501          Security Update for Microsoft .NET Framework 3.5.1
on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
(KB2911501)
5. MS14-011
KB2909210          Security Update for Windows Server 2008 R2 x64
Edition (KB2909210)
6. MS14-012
KB2925418          Cumulative Security Update for Internet Explorer 8
for Windows Server 2008 R2 x64 Edition (KB2925418)
7. MS14-015
KB2930275          Security Update for Windows Server 2008 R2 x64
Edition (KB2930275)
8. MS14-016
KB2923392          Security Update for Windows Server 2008 R2 x64
Edition (KB2923392)
Has anyone of you ever faced similar(site not opening on mobile browsers) issue after installing these patches on farm servers .
Any help would be much appreciated .
Thanks
Saquib Khan

We have found below error related in ULS as well as event viewer both :
Exception captured in Exception HttpModule: System.Web.HttpException: Server cannot append header after HTTP headers have been sent.
at System.Web.HttpResponse.set_RedirectLocation(String value)
at Microsoft.SharePoint.Utilities.SPMobileUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String
queryStrings)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.HandleMobilePageRequest(HttpContext context)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Saquib Khan

User has contribute access but he is not able to access the site collection...

User has contribute access but he is not able to access the site collection...

What error does he get.
Can you share fiddler trace(check if any 404 error)
what error do we see in ULS Logs
Create disableloopback
registry on server
http://support.microsoft.com/kb/926642/en-us

Not able to access blackberry world on Z10. what could be the reason?

not able to access blackberry world on Z10. what could be the reason? It wasn't issue earlier but facing it from last two days.

Please guys read other forums on this community before posting redundant issues.
Try this fix
Go to the games app.
At the bottom tap on games.
At the right bottom, you will notice three dots. Tap the dots
Tap the option to enter the blackberry world. Wait until the screen is loaded
Swipe right to Enter My World - > My Apps and Games.
Tap the three dots again to check for updates.
Update all the apps and close your App World.
Try accessing the app world in the standard way. Everything mus be fixed by now.
Twitter: @ukmight
1. Click on the " Like " button if you find anything helpful posted.
2. If any of the replies in your post has resolved your problem, mark the reply(ies) as " Solution ", so that others can readily view the solution instead of creating another redundant post.

Not able to access OAM 11g Console

Similar Messages

Maybe you are looking for