Not able to access ports through firewall

I'm setting up our new server, and we want to run a Quark license server through port 1028.
In the Server Admin, under Firewall->Services->Settings, I set up a service for the license server on port 1028 using TCP and UDP protocols. It's allowed for any traffic.
under Firewall->Advanced->, I set up a rule to:
Allow all Quark services
Source: any port 1028
Destitnation: any port 1028 interface IN
when I scan the open ports onthe server, I don't get a reponse from this port, or any ports. I've tried turning the firewall off completely, and it still doesn't show in the port scan.
The only major change we're made to this server is that we're running bonded Ethernet on the 2 ports. Could this be stopping the ports from getting through?
I've checked with IT, and they've (supposedly) verified that there aren't any blocked ports on our switch. The old license server runs fine on port 1028, and it's on the same switch.
Mac OS X (10.4.7)

You are running a firewall on a non public server?
Usually source and destination are not the using the same port number.
Source is usually chosen from a range of high port numbers.
Nevertheless if the QLA server isn't running on the server you woun't get an indication when portscanning the server (try portscanning on the server and use either localhost/127.0.0.1 or the "real" bonded interface IP).
To my knowledge a switch can't block portnumbers but for a bonded interface the switch needs LACP capability for the trunk. There could also be different VLANs and routing.

Similar Messages

Safari not able to access internet through wifi after updating iphone 3gs with ios6

i have updated my iphone 3GS with ios 6 and initially my wifi worked fine but for some strange reason it stopped connecting to internet even though its connected to my home wifi i have and tried and failed with all the possible solutions given in this forum i am able to use safari with my cellular data network but with wifi its not working please provide me with a solution

well, first check whether you're connected to the blackberry network...
how can I check whether myself connected to blackberry?
Check within the network bars on the phone whether it is showing you 3G, EDGE or GPRS in capital letters...!!
If not give a hard-reset to the phone (remove the battery put it back once)...
And if it shows in caps letters then try requesting for services again... how? on the phone desktop > within the search bar > type "Host Routing Table".... search results shows you as "options"... select that & select host routing table... afterwards, hit the blackberry menu button > select register...
.RoCkInG dUdE.
Trust Your Technolust | Do not PM for any support
If a solution received, please hit on to show your support.

Not able to access the application through URL in clustered environment.

Hi,
I recently depoyed my application on clustered environment of weblogic 8.1 SP4.
Now I am able to access the application through the managed server name with port number but not able to access through URL.
For ex
http://machine1:7001/test/login.do?m=begin
this is accessible
If I use
http://test.domain.com/test/login.do?m=begin
Then application is not accessible.
any HTML or JSP page page is in reach by both the URL.
Please suggest me what should I do in this regard.
thanks
singhV

Hi Syed,
I meant to ask are you able to see the application you created in Hyperion Planning Login page,if yes try accessing the created application through Hyperion Planning(Try restarting Planning Services once even if you are able to launch hyperion planning page) url "http://servername:8300/HyperionPlanning and selecting the application you created.
And also could you please let me know if you are logging in to workspace through admin username ? and also check if you are able to see the application in shared services and try to provision any group on that application.
(The Assumptions are if application is not created successfully then it will not be available in workspace to launch and if its in maintainance mode (Application Maintenance Mode) in Application Settings and last would be check OHS and Hyperion Planning Services)
Thanks
Amith

I am not able to access my photos through the photo application... when I click on the photo app, I can see the camera roll but a transparent album screen is over it and I cannot click on the photos to see it... can any one please help ???

I am not able to access my photos through the photo application... when I click on the photo app, I can see the camera roll, but a transparent "album" screen is over it and I cannot click on the photos to see it... can any one please help ???

Known bug. Quit the Camera App, double-tap the home key and delete Camera from the recent apps bar. Fire it up again, should be good.

BO 4.1 LCM not able to access through Web Browser

Hello Folks,
I installed BO 4.1 in my Vmware workstation 10. successfully. its working fine all tools and web based tools like CMC and BI launch pad.
I have problem while connecting to LCM through below link.
localhost:8080/BOE/LCM
Once i get hit this link on google crome browser I'm getting below error. Please anyone suggest me how to access LCM in my local server.
404 Missing Page
The page you requested is not available on this web server for one of the following reasons:
The address you typed may be inaccurate. For example, a character was missing. To correct this issue, double-check the address and make sure that it is spelled correctly.
If you clicked on a link or button, the web application that generates this link may be experiencing a temporary problem. Close and restart your browser and try the link again at a later time.
After verifying that the error is not the result of a bad address or web application problem, perhaps the page you tried to access may no long exist or can not be generated. Report this problem to the webmaster or the administrator.If you are the webmaster or the administrator of this web server, refer to the SAP BusinessObjects FAQ page regarding HTTP errors for more suggestions.
If the problem still persists, please:
Search the SAP BusinessObjects Knowledge Base Articles for similar cases.
Contact with SAP BusinessObjects Customer Support.
Thanks
venkat

Hello Jawahar,
Thanks for your reply.
Your right from 4.0 its a Promotion Management activity with LCM.
Here my question is I'm not able to Access LCM thorogh Localhost:8080/BOE/LCM.
Please anyone help me how to do rectify this.
Thanks
venkat

HT203163 I am not able to access to iphone updates/store; as secure link to itunes store failed. I tried to turn firewall off, reinstall itunes and other troubleshoot options but none of them works.....

I am not able to access to iphone updates/store; it displays the message under diagnostics 'secure link to itunes store failed'.
I tried to turn firewall off, reinstall itunes and other troubleshoot options but none of them works......
Please help.

Update: I tried the "Toshiba Recovery Wizard" after everything else either fizzled out or hung up. After going all the way thru the recovery process (up to 100%), I finally got an error message.....it didn't work. And now, when I fire up the computer, I don't even get to that menu with the recovery options....the only thing I can boot into is the screens with the various ways to run your OS (in "safe mode", "safe mode with networking", etc).
I'm not a techie, but I'm guessing at this point, the part of my hard drive that got damaged in the fall was, at the very least, the partition with the recovery data. Couple that with the fact that this cheapo Toshiba laptop didn't even come with recovery disk (or ANY kind of disk, even basic installation software!), I'm screwed: I don't see any way to get a workable computer now without some kind of disk to boot from. So NOW my concern is more about spending the $$ for a new OS and THEN finding out the hard drive has other problems too...is broken in some other way to boot.
How to check this? As I said, I did run "chkdsk" back when I could get into the recovery menu and run the fix-it programs. It didn't note any problems. Thinking of taking this opportunity to upgrade to Windows 7 from Vista (which I never liked), but I have to know that the computer is otherwise ok....how to be sure?

Not able to access meeting place 6.0 through Web browser

Meeting Place version : 6.0
Issue : Not able to access meeting place through a web browser
Getting errors regarding database in eventviewer.

Also, if you reset the "sa" password in Microsoft SQL Server, you will want to reset it in MeetingPlace. Do this by going to the desktop of the Web Server(s), then double click on the orange door on the bottom right, click on the Web Conferencing tab, and re-entering the "sa" password for both the Database Connection and the Slave Database Connection if both are showing.
Then you may need to restart the "Cisco Unified MeetingPlace Web Conferencing" service.
If this still does not work, you can open a SQL Server tool such as Enterprise Manager or Query Analyzer and try to connect to the SQL server using the "sa" credentials.
Regards,
Andrew

I have connected an AirPlay enabled device to iphone4s. I started palying songs. I was able to access internet through 3G from iphone.After few seconds 3G symbol disappears and WiFi symbol appears. After that I'm not able to access internet. Why is it so?

I have connected an AirPlay enabled device to iphone4s. I started palying songs. I was able to access internet through 3G from iphone.After few seconds 3G symbol disappears and WiFi symbol appears. After that I'm not able to access internet. Why is it so?

SMS. Deggie, had them check that. After a lengthy discussion with Senior Tech advisor, it appears it is iMessage/Face Time server (they are the same) issue, which will strong arm those into purchasing Data if they use iMessage over multiple devices, as the server registers the phone number associated with apple ID. Not impressed. I put what I've learned here in a simliar thread
https://discussions.apple.com/message/17416082#17416082
and this is what I've put in apple.com/feedback
"iMessage requires internet. SMS does not. iMessage/FaceTime auto logs phone numbers to the iMessage/Facetime server (it's the same server as I've come to learn), this means that when iMessage/Face Time is turned on anyone sending a message through the server to me will only be sent as an iMessage- not when I'm not connected to internet, meaning I will not receive the message as an SMS by default, when I have another device using iMessage (such as MacBook) logged in.
This feature is a problem for me, bottom line, in that iMessage strong arms the consumer (me) into having to buy a data plan that they either do not want, or do not need."

Not able to access virtual machine applications in remote server.

Hi All,
I am using Oracle Linux server 5.6 - 64 bit and installed all IAM 11gr2 stack and Oracle data base. I am not able to access the any Identity Management applications in remote servers (able to access in local virtual machine) but i can able to access Database Enterprise Manager application which is running in the same machine. If any one can help me on how to fix the issue really appreciate your help.
Thanks
Kiran Pokuri

It should work with adapter in bridged mode and firewall down. (you should however check and confirm this is the case)
A reason for why local client connections to the server s/w works, and remote ones not, can be due to IP/port binding. If the server binds its listening port on an IP (such as localhost) that is not accessible to remote clients, those clients will not be able to connect.
Have a look at what IP address(es) the listening port(s) are on: netstat -l -t -p
You should see a *:7001 entry for the relevant server process - meaning that it used INADDR_ANY when it did the port bind (binds port to all existing and future IP addresses of that platform).
If not, it means the port bind was done to a single specific IP address - and that the clients need to be able to route and connect to that specific IP in order to get a connection with the server process.

User has appropriate permission, still not able to access one of the sharepoint site applications.

Hi,
I have tried all solutions available on internet regarding this problem but none seems to work.
As per one solution I added the user in sharepoint site collection administrator group still no luck!
As per another solution I tried to run “User Profile Service Application Proxy – User Profile to SharePoint Full Synchronization”
“User Profile Service Application Proxy – User Profile to SharePoint Quick Synchronization”
but they dont run for some reason. Both these jobs are scheduled to run everyday but last time they ran was some date in 2011. When I click on Run Now nothing happens.
I deleted all cache, forms password history everything. Added the site in trusted sites and all. No luck!
User also tried to access the site by logging onto another system but still same issue.
This user recently joined alongwith a few more people. All of them are able to access the site except this particular user. So, a web part or unpublished page cant be the reason, right?
This user is only able to access the home page which is say http://<siteurl:1234> application while the site which this user is not able to access is
http://<siteurl:2345>.
I even tried to give access through sharepoint designer but no luck! Please help!
PS: This may not be relevant but still I'm sharing. Earlier I used to add users in manage user profiles - new profile. But now as soon as the user is added into active directory there profile is getting created automatically. This might be happening due to
active directory and user profile sync but the question is how? Because I dont remember configuring this. And it was not configured earlier too.

Hi,
According to your description, my understanding is that only one user cannot access the site even though he has the right permission.
I recommend to verify the things below:
Check the permission of the user in the site to see if the permission is right.
Is http://<siteurl:2345> a new site collection ? Can the user access other pages except the home page in
http://<siteurl:1234>?
Grant needed permission to the user in the web application to see if the issue still occurs.
Delete the user and re-add the user in AD to see if the issue still occurs.
Check the ULS log for detailed error message.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Not able to access DB on VM after getting Reserved IP

Hi,
I have Reserved an Public Virtual IP for my VM 23.102.xxx.xxx The OS WIN server 2012 R2 and and has SQL server 2012 running on it.
Problem:
1. I'm not able to access the DB or connect to the server form outside( from my local machine). I was able to connect when the Public Virtual IP wasn't reserved.
2. As my website is hosted on the same VM, I use the Internal IP address as the Binding IP address, however I recently noticed that the Internal IP address has changed and my website was down.
3. How do I prevent the Internal IP address from changing. So that I don't have to reset my webconfig and binding IP address frequently?

Hi,
Thanks for your question.
1. How did you connect to the VM? I recommend you to use DNS name of the cloud service(xxx.cloudapp.net) with the public port for RDP to connect to see if the issue persists.
2. In general, if you shut down an Azure VM to stopped (deallocated) status, the resources for the VM will be released and the internal IP address may be changed.
3. You can assign a static internal IP address to an existing VM if it is in a virtual network. For more detailed information, please refer to the link below:
Configure a Static Internal IP Address for a VM
Best regards,
Susie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Not able to access the Database & Clusterware from OEM Console.

hi,
I had installed Oracle RAC 11g R2 in RHEL 5.3 Operating environment. I had installed my Oracle RAC with Enterprise Manager Console.
Its with the defailt port 1158. After the installation when i try to access my EM Console, i was not able to access the Database and Clusterware from EM Console.
When i access the EM console with url, I found with Startup and Perform Recovery option. But whereas my database is already startup and running.
So when i click startup its saying database is already started. Since it is a prodution environment i dont want to go with Perform recovery option.
Please tell me hw to attach files in this thread so that i can send the snap shot of the console for your reference.
with regards
A.Aravind
Edited by: 795847 on Sep 21, 2010 10:40 PM

hi,
As mentioned due to not having the default listener port 1521, we are facing this problem.
As meniotned i had changed the emoms.properties file and changed the port and my emctl page is opening.
But am not able to access the other parameters like ASM, Servers, Clusters etc bcoz since in some file it is looking for 1521 default port.
So is it better to go for emctl deconfig and config again or to change the port the files which required.
If i do in what are the file the default port will be located related to emctl.
with regards
A.Aravind

I do not have a Mac but I want to give a software program for a Mac as a gift. I am not able to access the Mac store. Do I just get an iTunes card?

I do not have a Mac but I want to give a software program for a Mac as a gift. I am not able to access the Mac store. Do I just get an iTunes card?

"Gift Card" is sometimes called a tacky gift, but if it allows the other person to get whatever they want it works.
Besides, anything purchased through App Store is usually "All Sales Final", so I think iTunes card is a good idea.

I am not able to access the sharepoint:80 site using the local IP address.

I am able to access the Central administration using the Local LAN IP address and the port number, but, I am not able to access the sharepoint:80 site using the same local IP address without the port for the central administration. I tried adding
the local IP address in the Alternative Access Mapping to no avail. Any ideas, where I should look, is much appreciated.

Hi，
By my test, I set the Alternative Access Mapping for the SharePoint 80 port web application as below and it works fine:
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

The server principal "XYuser" is not able to access the database "Ydb" under the current security context

SQL2005 on winserver 2003. I have a view in Xdb that accesses tables in 2 different databases (Xdb and Ydb) on the same server. I have mixed mode security. I have a SQL user (XYuser) that has read access to all tables and views on both databases, yet when I try to access the view using a C# windows application I get the following error:
The server principal "XYuser" is not able to access the database "Ydb" under the current security context
This same scenario works under SQL 2000. I looked through the postings and tried to set TRUSTWORTHY ON on both databases but that didn't help. I can access any other views or tables on the SQL 2005 server, just not the one that joins the tables cross databases. Any help is much appreciated... john

This appears to be a Login/Database Mapping issue. I was having this problem, but was able to resolve it as follows:
Using the SQL Server management Studio:
In the Object explorer, under the SERVER security folder (not the database security folder), expand Logins.
That is: ServerName -> Security -> Logins
NOT: ServerName -> Databases -> DatabaseName -> Security -> Users
Select the Login that is having the troubles. Right click on the Login and select ‘Properties.’
The ‘User Mapping’ page should list all databases on the server with a check mark on the databases that the Login has been mapped to. When I was getting the error, the database in question was not checked (even though the Login was assigned as a User on the database itself). Map the Login by checking the box next to the database name. Set the default schema. Then select the roles for the Login in the Database role membership list box. I selected db_datareader and public. After clicking OK to save the changes, the problem was resolved.
In order to ‘Map’ the Login, the Login must not already be as User on the database, so you may have to go to the database security (ServerName -> Databases -> DatabaseName -> Security -> Users) and delete the Login from the list of database Users before mapping the Login to the database.

Not able to access ports through firewall

Similar Messages

Maybe you are looking for