Not able to access secure web sites

I have a satelite modem that connects via WAN port to my Airport Extreme which then is connected via LAN port to Netgear ethernet card on my PC. After just getting the broadband last week, I noticed that I cannot access certain secure sites such as my bank or american express site on my PC but I can do it via wireless from my PowerBook G4. When I bypass the Airport extreme and connect the modem directly to the PC ethernet card, I can then acess the secure sites on my PC.
Can some please help to solve this so that I can acess the secure sites on my PC as well when using the Airport Extreme?
After taking to tech supprot at the Hughes.net they say that the router is somehow blocking the sites into the PC- something about a MTU or something like that?
Thanks for your help
Faltu1

Thanks Duane for your prompt reply.
My knowlede of computers in very shameful. I am not aware of any software on the PC that has the wireless port more restricted. All I have is the AVG free Anit-virus and the Free Microsoft Fire Wall installed.
If it is a software blocking the ports; how can find out which one it is and what can be done to fix it.
Are there some settings on the AEBS that can be adjusted for it to communicate better with the PC to all the sites to pass through.
I did find some thing on the appple web site about restricted website but I don't understand what it means and wether it really applies to my situation. See below:
Restricted address ranges
Using AirPort Admin Utility or AirPort Utility, check the "Public" or "WAN" IP address. If this address starts with a "10" or "192", your ISP is using restricted address ranges. This may affect the ability of the base station to share the Internet connection among computers. If you have difficulty connecting to some websites when the base station has a public IP address beginning with 10 or 192, use AirPort Admin Utility or AirPort Utility to turn off connection sharing for the base station. Only one computer will be able to connect through the base station. If you have a broadband modem, you may need to unplug its power supply for a few seconds to reset it. If that resolves your issue, contact your Internet service provider. In this configuration the base station is serving as a wireless bridge between your computer and the ISP, rather than as a wireless router. To connect more than one computer, your ISP would need to assign additional IP addresses to your account.
Thanks for your help again.

Similar Messages

Not able to access Microsoft web sites

Hi!
We cannot only access Microsoft Websites through ISA 2006 on web proxy clients and even on ISA itself. We disabled all the rules but still cannot access. ISA server cannot access Microsoft websites even if we use direct connection to internet without using
proxy.
Any Suggestions?
Thanks.

Hi,
In addition, have you received any error messages? Firstly, I recommend you to ping the website or nsloookup the website?
Please make sure that those websites are not added
in restricted sites on your browser or you can change a browser to see if the issue persists.
Best regards,
Susie

After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

After upgrading to Mountain Lion I am not able to access "security and privacy" button under "system preferences". I like to activate "find my mac" but cannot access privacy setting after upgrade. Kindly advice.

BO 4.1 LCM not able to access through Web Browser

Hello Folks,
I installed BO 4.1 in my Vmware workstation 10. successfully. its working fine all tools and web based tools like CMC and BI launch pad.
I have problem while connecting to LCM through below link.
localhost:8080/BOE/LCM
Once i get hit this link on google crome browser I'm getting below error. Please anyone suggest me how to access LCM in my local server.
404 Missing Page
The page you requested is not available on this web server for one of the following reasons:
The address you typed may be inaccurate. For example, a character was missing. To correct this issue, double-check the address and make sure that it is spelled correctly.
If you clicked on a link or button, the web application that generates this link may be experiencing a temporary problem. Close and restart your browser and try the link again at a later time.
After verifying that the error is not the result of a bad address or web application problem, perhaps the page you tried to access may no long exist or can not be generated. Report this problem to the webmaster or the administrator.If you are the webmaster or the administrator of this web server, refer to the SAP BusinessObjects FAQ page regarding HTTP errors for more suggestions.
If the problem still persists, please:
Search the SAP BusinessObjects Knowledge Base Articles for similar cases.
Contact with SAP BusinessObjects Customer Support.
Thanks
venkat

Hello Jawahar,
Thanks for your reply.
Your right from 4.0 its a Promotion Management activity with LCM.
Here my question is I'm not able to Access LCM thorogh Localhost:8080/BOE/LCM.
Please anyone help me how to do rectify this.
Thanks
venkat

Not able to access the web based RuleAuthor of Oracle Business Rules

Hi ,
I have Installed Oracle SOA Suite (11g) version from here .
I have followed the steps in the Installation guide .
I was able to install it successfully. At present I need to Work on the oracle Business Rules.
As per the documentation I have tried to access the Rules author at the following URL
http://localhost:7001/ruleauthor/
But I was not able to access it.
Please let me know if I need to install any other component to access Rule Author. please let me know if you need any more information.
Thanks in advance for your time,
Raja Kumar

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select Change Settings for Keychain "login". In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked Keep login keychain unlocked is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

Not able to access SOAP web service data control from adf mobile

Hi,
I am trying to call web services from adf mobile..
I have created data control from external web service and it is perfectlly working on web browser..
But why it is showing an error on emulator??
Is there any .jar file missing in adf mobile so that it is not supporting a web service?
Or is there any other problem? Emulator is connected to network and I am able to run WSDL in emulator's browser..
Please help me to solve this issue..
Thanks,
Laxmi

Emulator is connected to network and I am able to run WSDL in emulator's browser..
Connecting to WSDL in the browser is not the same as connecting to WSDL in an application.
To access a web service from an Android device enable a permission in AndroidManifest.xml that allows applications to open network sockets. Add the following uses-permission element.
<uses-permission android:name="android.permission.INTERNET"></uses-permission>

Not able to open secure web pages

Hi Members,
Their seems to be some problem with my internet. I hope i can get some answer to it. After i had my firmware update for my macbook (leopard 10.5.2 combo updated), it became very slow and gave me kernel panic. Last week i had to format my HDD and re-installed Mac OSX. Now i see some very serious problem. Neither i can use my macbook to log in to dicussion forum and not able to open any secure websites like facebook.com, hi5.com and microsoft.com and support.apple.com. Its pulling my nerves.
Kindly Help.
Regards
Vikram

Thank you so much for the helpful information. Let me tell you in brief...
"Hi,
It has been an ongoing problem with my mac book. I have to use a PC to log in to my discussion forum to know about my questions. I am using a macbook (leopard 10.5.2 combo updated) and i had done a complete re-installtion of the Mac OSX as i had a kenel panic after i had created another account to check the problem with safari (as on a telephone call with apple support). Then i am not able to log into my account even on .mac account too. I had firefox but i had to do too much of "forced quit" when i had to close. Even my "SENDING ERROR REPORTS" FAILS everytime.
All this started when i had some software updates from the website. How can i get rid of this problem. Further, while using any pc on the same network, i have the same problem. Is it a hardware / Mac OS software related problem or the Network (ISP) related problem....
Plzzzzzzzzzzzzzzz Help. "

I am not able to open any web site. I get an "Unable to load page" message.

Firefox crashed last night. When I tried to reopen, it gives me "unable to load page" error. I tried several websites and same message. I removed firefox and re-downloaded it. Same thing.

Still not able to open sites.

WCS-518 -- Web Clipping is not set up for accessing secure web sites

My webcliping studio didn't have this message until recent changes which I don't know what is.
I was able to go to some truested sites with https. And I also ran into other error messages such as WCS-517 before if the site was not a trusted site.
But now I can't go to any trusted sites although I could still visit those sites from a local browser session in the portal box.
I have played with the ca-bundle.crt file and it seems to make no difference in this case. The original ca-bundle.crt file should contains the sites such as entrust.net.
My environment contains web caches and firewalls.
And my search for the error message WCS-518 turned out nothing at this forum.

Not sure what you mean when you say you remove the group from the parent. Groups are always maintained for an entire site collection. You can remove the permissions assigned to a group at the parent level, but that won't remove the group. The
group is still there.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem.

Not able to use secure internet sites after Apple Update in WinXP

I used the apple updater after installing my Windows XP on my bootcamp partition, and now I am no longer able to log in to secure sites. I am unable to access my google account, this apple forum account, my Steam account, etc. I am unable to download updates such for applications such as Java as well. These things were working before I used apple update. I've tried going through all of my network settings and can't seem to find a problem. I've got my firewall turned off and my security setting set to low, but still no dice. I really, REALLY don't want to have to reinstall. That's an all day affair to get my machine back to where it is now, and I'd rather not waste the time if I can fix this problem instead. Any suggestions are welcome. Thanks.

I believe that the Apple Update was security certificates but my memory may be faulty. If something want wrong with that installation, then I can imagine that all your certificates were corrupted, which could cause problems validating that gmail.google.com is what it says it is, and so on, which would explain why it doesn't work. But keep in mind that I don't know what I'm talking about.
Have you tried using System Restore (Start\All Programs\Accessories\System Tools\System Restore, I think) to restore the computer to a time prior to the Apple Update?

Secure web sites

After getting computer fixed at Apple Store and downloading all current updates, I cannot cannot access secure web sites in Safari which I could do easily before. i.e. my bank account, pay son's college tuition on lines and re-fill prescriptions. How can I fix this?

Hello pete-o:
Welcome to Apple discussions.
If you have not done so, run permission repair. Then close Safari and trash the preference file (com.apple.safari.plist). Reenter your personal preferences and open Safari.
Barry

Sharepoint 2010 - Not able to access Sharepoint 2010 Public facing site on mobile browsers

Hi All,
Earlier, I posted a similar question in the forum , but did not get appropriate response . Posting it again with some more information .
We are not able to access Sharepoint public facing site on Mobile browsers like chrome, IE, Safari (However the site is working fine on Firefox mobile browser and on PC/Laptops as well .)
Following is the error we are getting :
"Cannot set custom attribute on mobile controls in this page. Custom attributes specified are Access Key=0."
I checked in the event logs , following was the exception :
Exception captured in Exception HttpModule: System.Web.HttpException: Server cannot append header after HTTP headers have been sent.
   at System.Web.HttpResponse.set_RedirectLocation(String value)
   at Microsoft.SharePoint.Utilities.SPMobileUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String queryStrings)
   at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.HandleMobilePageRequest(HttpContext context)
   at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea)
   at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Also, there was a microsoft OS security patching on our farm servers post which the error starts coming . Following were the patches that were installed
1. MS14-005
KB2916036          Security Update for Windows Server 2008 R2 x64
Edition (KB2916036)
MS14-009
KB2898857          Security Update for Microsoft .NET Framework 3.5.1
2. on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
(KB2898857)
3. MS14-009
KB2901112          Security Update for Microsoft .NET Framework 3.5.1
on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
(KB2901112)
4. MS14-009
KB2911501          Security Update for Microsoft .NET Framework 3.5.1
on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems
(KB2911501)
5. MS14-011
KB2909210          Security Update for Windows Server 2008 R2 x64
Edition (KB2909210)
6. MS14-012
KB2925418          Cumulative Security Update for Internet Explorer 8
for Windows Server 2008 R2 x64 Edition (KB2925418)
7. MS14-015
KB2930275          Security Update for Windows Server 2008 R2 x64
Edition (KB2930275)
8. MS14-016
KB2923392          Security Update for Windows Server 2008 R2 x64
Edition (KB2923392)
Has anyone of you ever faced similar(site not opening on mobile browsers) issue after installing these patches on farm servers .
Any help would be much appreciated .
Thanks
Saquib Khan

We have found below error related in ULS as well as event viewer both :
Exception captured in Exception HttpModule: System.Web.HttpException: Server cannot append header after HTTP headers have been sent.
at System.Web.HttpResponse.set_RedirectLocation(String value)
at Microsoft.SharePoint.Utilities.SPMobileUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String
queryStrings)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.HandleMobilePageRequest(HttpContext context)
at Microsoft.SharePoint.ApplicationRuntime.SPRequestModule.PostResolveRequestCacheHandler(Object oSender, EventArgs ea)
at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
Saquib Khan

WRT51AB - Not able to connect to one site when accessing thro router

When I am trying to access a particluar website directly via cable modem using ethernet cable, I am able to access the website. However if I connect the wireless router to the modem and then try to access the website using wireless connection, I am not able to access the site.
Any ideas?
Any help will be appreciated.
Thanks
Sonia

Are you able to go online using wireless router?? Logon to router’s setup page and try changing wireless channel to 11, go to advanced wireless settings and reduce beacon interval to 50, reduce fragmentation and RTS threshold to 40 by each, try upgrading latest firmware on the router… also let me know which web sites you are trying to access?? Is it secured websites?

User has appropriate permission, still not able to access one of the sharepoint site applications.

Hi,
I have tried all solutions available on internet regarding this problem but none seems to work.
As per one solution I added the user in sharepoint site collection administrator group still no luck!
As per another solution I tried to run “User Profile Service Application Proxy – User Profile to SharePoint Full Synchronization”
“User Profile Service Application Proxy – User Profile to SharePoint Quick Synchronization”
but they dont run for some reason. Both these jobs are scheduled to run everyday but last time they ran was some date in 2011. When I click on Run Now nothing happens.
I deleted all cache, forms password history everything. Added the site in trusted sites and all. No luck!
User also tried to access the site by logging onto another system but still same issue.
This user recently joined alongwith a few more people. All of them are able to access the site except this particular user. So, a web part or unpublished page cant be the reason, right?
This user is only able to access the home page which is say http://<siteurl:1234> application while the site which this user is not able to access is
http://<siteurl:2345>.
I even tried to give access through sharepoint designer but no luck! Please help!
PS: This may not be relevant but still I'm sharing. Earlier I used to add users in manage user profiles - new profile. But now as soon as the user is added into active directory there profile is getting created automatically. This might be happening due to
active directory and user profile sync but the question is how? Because I dont remember configuring this. And it was not configured earlier too.

Hi,
According to your description, my understanding is that only one user cannot access the site even though he has the right permission.
I recommend to verify the things below:
Check the permission of the user in the site to see if the permission is right.
Is http://<siteurl:2345> a new site collection ? Can the user access other pages except the home page in
http://<siteurl:1234>?
Grant needed permission to the user in the web application to see if the issue still occurs.
Delete the user and re-add the user in AD to see if the issue still occurs.
Check the ULS log for detailed error message.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

I am not able to access the sharepoint:80 site using the local IP address.

I am able to access the Central administration using the Local LAN IP address and the port number, but, I am not able to access the sharepoint:80 site using the same local IP address without the port for the central administration. I tried adding
the local IP address in the Alternative Access Mapping to no avail. Any ideas, where I should look, is much appreciated.

Hi，
By my test, I set the Alternative Access Mapping for the SharePoint 80 port web application as below and it works fine:
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

Not able to access secure web sites

Similar Messages

Maybe you are looking for