Not able to access the Lynksys WRT54GL router

Hi,
This is Vijay here. Few months back i had upgraded my Lynksys router with Coova AP firmware. Everything was working fine. I had configured the AAA server on CoovaAP and was able to access the internet.I had configured the user name and password as a "testuser" and "password" respectively. With that user id i used to access the Coova AP router and internet.
Now i want restore the WRT54GL firmware on Lynksys router. But with the used id and password which i had configured the router is not at all accessible. So i did 30-30-30 reset on the router 2-3 times.
Now i can see openwrt login page with 192.168.1.1 IP address. It is asking for user id and password. I tried all the combinations of user id and password, but no luck. I browsed some link on the internet and some people have recommended that default user id as a "root" and blank password. But with that also the router is not accessible. I cant to do much on the router untill i will log in to router. I have spent lot of time on this.
Can somebody please tell me how to restore back the original WRAT54GL firmware on my router. Anyhow i want WRAT54GL firmware on Lynksys router. Can somebody tell me how to achieve this?? Or atleast what user id and password should i try to log in to router?? It will be great help.
I tried to use telnet command on the router (Connected router to linux based computer with ethernet cable). But telnet also not working. It is not asking for password, and it saying disconnected.
I am stuck on this router from almost 1.5 weeks. Can somebody please tell me some solution.
Regards,
Vijay

Ask in a openwrt forum. They should know how you can upload a new firmware file.

Similar Messages

  • Not able to access the internet SOlaris 10

    I have installed solaris 10 and it is in subnet but no router. I was not able to access the internet.
    hostname.e1000g0
    hostname.hme0
    hostname6.e1000g0
    When I create the file dhcp.e1000g0 internet works but the hostname becomes unknown.
    Can someone please help me ?

    route add default 192.168.1.55 (Ipaddress of default gateway)
    DHCP able to find it dynamically but once dhcp is off we need to mention it.
    Makes it work.

  • User has contribute access but he is not able to access the site collection...

    User has contribute access but he is not able to access the site collection...

    What error does he get.
    Can you share fiddler trace(check if any 404 error)
    what error do we see in ULS Logs
    Create disableloopback
    registry on server
    http://support.microsoft.com/kb/926642/en-us

  • Not able to access the multi-source universe in WebI

    Hi
    I am not able to access the multi-source universe in WebI, getting below error message.
    [Data Federator Driver] Unexpected exception: com.crystaldecisions.thirdparty.org.omg.CORBA.UNKNOWN: null | [Data Federator Driver] Failed to connect to any of the provided 'Central Management Server' hosts.
    And also Not able to perform anything to designing multi-source universe in business Layer.
    Universe back-end is
    Oracle 11g and
    SQL2008 DB
    Version IDT: 4.1 Support Pack 2
    SAP BusinessObjects BI Platform 4.1 Support Pack 2,

    Hi Sreeni,
    You can create a new APS in CMC containing the Data Federation Service with
    -Xmx2g -> 8g (This is the suggested range)
    Make sure you remove this service from the existing APS and then create a new one.
    You could refer SAP KBA 1694041 - BI 4.x Consulting:- How to size the Adaptive Processing
    Server (APS) which would assist you in sizing the APS.
    Regards,
    Manpreet

  • Not able to access the Database & Clusterware from OEM Console.

    hi,
    I had installed Oracle RAC 11g R2 in RHEL 5.3 Operating environment. I had installed my Oracle RAC with Enterprise Manager Console.
    Its with the defailt port 1158. After the installation when i try to access my EM Console, i was not able to access the Database and Clusterware from EM Console.
    When i access the EM console with url, I found with Startup and Perform Recovery option. But whereas my database is already startup and running.
    So when i click startup its saying database is already started. Since it is a prodution environment i dont want to go with Perform recovery option.
    Please tell me hw to attach files in this thread so that i can send the snap shot of the console for your reference.
    with regards
    A.Aravind
    Edited by: 795847 on Sep 21, 2010 10:40 PM

    hi,
    As mentioned due to not having the default listener port 1521, we are facing this problem.
    As meniotned i had changed the emoms.properties file and changed the port and my emctl page is opening.
    But am not able to access the other parameters like ASM, Servers, Clusters etc bcoz since in some file it is looking for 1521 default port.
    So is it better to go for emctl deconfig and config again or to change the port the files which required.
    If i do in what are the file the default port will be located related to emctl.
    with regards
    A.Aravind

  • I do not have a Mac but I want to give a software program for a Mac as a gift. I am not able to access the Mac store. Do I just get an iTunes card?

    I do not have a Mac but I want to give a software program for a Mac as a gift. I am not able to access the Mac store. Do I just get an iTunes card?

    "Gift Card" is sometimes called a tacky gift, but if it allows the other person to get whatever they want it works.
    Besides, anything purchased through App Store is usually "All Sales Final", so I think iTunes card is a good idea.

  • I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc. I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting fo

    I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc.
    I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting for it to work.
    Can you please help me with this?
    Thanks Matthew.

    Hello,
    The services you listed in your post will require a data plan which is provisioned by your wireless provider. You may want to contact your wireless provider to see if you have the correct plan.
    Cheers,
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • I am not able to access the sharepoint:80 site using the local IP address.

     I am able to access the Central administration using the Local LAN IP address and the port number, but, I am not able to access the sharepoint:80 site using the same local IP address without the port for the central administration. I tried adding
    the local IP address in the Alternative Access Mapping to no avail. Any ideas, where I should look, is much appreciated.

    Hi，
    By my test, I set the Alternative Access Mapping for the SharePoint 80 port web application as below and it works fine:
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Eric Tao
    TechNet Community Support

  • I am not able to access the internet without wi-fi after updated to iOS 7.0.4. Please help!

    I am not able to access the internet without wi-fi after updated to iOS 7.0.4. Please help!

    Hello sweetracy,
    The following article can help restore and stabilize your cellular data connection.
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/TS3780
    Cheers,
    Allen

  • I am not able to access the "featured" and "top charts" in the app store

    I am not able to access the "featured" and "top charts" icons in the app store.  Everything else works fine.

    Here I am using Java Type IV for database
    connection.
    So,there was no necessity of creating DNS.How your app communicates with db shouldn't matter for the end user. Still, you may want to use a functional network name also for the thin client driver connection string.
    So,is there any other way to solve this problem.What is the problem really? Do you not use dns for network naming? Maybe you have to manage the hosts file on every client then.

  • I am not able to access the App Store on my Iphone 3GS with IOS 6.01, however i can access the same on my laptop when i connect my phone to my PC. Any suggestions on this.

    I am not able to access the App Store on my Iphone 3GS with IOS 6.01, however i can access the same on my laptop when i connect my phone to my PC. Any suggestions on this.

    varunsharmaapplefan
    http://support.apple.com/kb/ht5209 might help you.  An iPhone 4 can airplay content from apps that support airplay and iTunes but it cannot mirror.  If your game does not have airplay in the app you cannot mirror it to the apple TV so I don't know if you can play just the music.  You should have no problem playing your iTunes over airplay though.
    This may also help http://support.apple.com/kb/HT4437
    Regards
    Jules 

  • I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

    I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."

  • I'm not able to access the thumbnails of my open web pages. Why?

    I'm not able to access the thumbnails of my open web pages. Why?

    Oh ok, that explains it. Thank you so much. I'm still getting use to my ipad2. I've only had it for about three weeks

  • The server principal "XYuser" is not able to access the database "Ydb" under the current security context

    SQL2005 on winserver 2003. I have a view in Xdb that accesses tables in 2 different databases (Xdb and Ydb) on the same server. I have mixed mode security. I have a SQL user (XYuser) that has read access to all tables and views on both databases, yet when I try to access the view using a C# windows application I get the following error:
    The server principal "XYuser" is not able to access the database "Ydb" under the current security context
    This same scenario works under SQL 2000. I looked through the postings and tried to set TRUSTWORTHY ON on both databases but that didn't help. I can access any other views or tables on the SQL 2005 server, just not the one that joins the tables cross databases. Any help is much appreciated... john

    This appears to be a Login/Database Mapping issue.  I was having this problem, but was able to resolve it as follows:
    Using the SQL Server management Studio:
    In the Object explorer, under the SERVER security folder (not the database security folder), expand Logins. 
    That is: ServerName -> Security -> Logins
    NOT: ServerName -> Databases -> DatabaseName -> Security -> Users
    Select the Login that is having the troubles.  Right click on the Login and select ‘Properties.’
    The ‘User Mapping’ page should list all databases on the server with a check mark on the databases that the Login has been mapped to.  When I was getting the error, the database in question was not checked (even though the Login was assigned as a User on the database itself).  Map the Login by checking the box next to the database name.  Set the default schema.  Then select the roles for the Login in the Database role membership list box.  I selected db_datareader and public.  After clicking OK to save the changes, the problem was resolved.
    In order to ‘Map’ the Login, the Login must not already be as User on the database, so you may have to go to the database security (ServerName -> Databases -> DatabaseName -> Security -> Users) and delete the Login from the list of database Users before mapping the Login to the database.

  • Not able to access the portal on the network - (RedHat Enterprise Linux 5).

    Friends,
    I have installed the portal(7.1) on a linux(RHEL 5) box.I am able to access the portal locally and everything looks fine.
    However when I try accessing the portal on the network...I get "page cannot be displayed" as if the server is not listning on 8080.
    when I do "GET http://rexportal.davita.corp:8080" I get ........
    500 Can't connect to rexportal.davita.corp:8080 (connect: No route to host)
    what does this mean?
    other info:
    1) I have disbaled the firewall by setting SELinux to disabled.
    2)I am able to traceroute to the m/c
    3) can ftp and SSH
    4) When I do "GET http://rexportal.davita.corp" I see a apache server page.It means apache server is accessible at port 80 on the network.
    Can you plz help me resolve this issue.what can prevent my server not being accesible across the network
    Thanks!!
    Deepak.

    I was able to resolve this.! basically It was a firewall issue.
    To help othere here is what I found.
    I had disabled the SELinux utility which should have basically disabled the firewall service but It didnt stop it.
    You can check If the firewall is running with following command on redhat linux.
    service iptables status
    If it is enabled ,you can either stop it by
    /etc/init.d/iptables stop (not recommended -- for security)
    or
    you can add a entry for the port you want to enable by modifying the file
    /etc/sysconfig/iptables
    Hope it might be helpful !
    Thanks,
    Deepak.

Maybe you are looking for

  • Error while updating user Organization

    I'm using OIM 9031. In order to put reconciled user to right organization, I've created a custom entity adapter, that writes the value to Organization attribute of Xellerate User. According to logs, I can see, that my adapter returns no errors, but w

  • What is the processor family for an Intel T2080?

    Hi everyone, I'm compiling my own kernel and I'm stuck on the part regarding processor family. I got a weird sort of CPU. It's an intel pentium dual core T2080. It's not a Core 2 Duo or any of that. According to wikipedia, the model name is 'Yonah' a

  • How do i get my ringtones on my new iphone

    i recently purchesed a iphone 4s and downloaded ringtones and music and had to get a new iphone 4s today and my music and contacts transferred but my ringtones did not how do i get my ringtones back

  • Change Seconds Waiting for Device during boot

    During boot at the section: "Waiting 10 Seconds for Device", I am often dropped to a shell. I think it may be because I need to increase the wait time. How can I do this? I've looked in several places but I'm not sure what to look for.

  • LSMW with bapi BAPI_REQUISITION_CREATE

    Hi I'm creating an LSMW for create purchase requisition with Bapi (BAPI_REQUISITION_CREATE) I'm trying to upload 2 items for a PR but the LSMW is creating 2 PR with each item. How can I tell to the LSMW that I have to item for the same PR? Remember t