Not able to access the Oracle I/PM web client.

I have started the Administration server and the Oracle I/PM Managed Server. Now I'm trying to access the Oracle I/PM web client at this URL: http://hostname:16000/imaging. But when I hit this URL, the following error comes up:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I'm also posting a part of the logs from the IPM_server log file:
####<May 20, 2013 10:32:52 AM IST> <Notice> <WebLogicServer> <01hw311161> <IPM_server1> <main> <<WLS Kernel>> <> <> <1369026172860> <BEA-000360> <Server started in RUNNING mode>
####<May 20, 2013 10:32:53 AM IST> <Info> <J2EE> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1369026173516> <BEA-160151> <Registered library Extension-Name: bea_wls_async_response (JAR).>
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173641> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceHttps for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173735> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceJms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173735> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseService for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173750> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Jms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173766> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12 for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173782> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<May 20, 2013 10:33:51 AM IST> <Info> <Health> <01hw311161> <IPM_server1> <weblogic.GCMonitor> <<anonymous>> <> <> <1369026231604> <BEA-310002> <85% of the total memory in the server is free>
What configuration am I missing?
Thanks in advance
Pradeep

Hi Srinath,
I have checked that as well, it is showing the IPM_server in running mode.
Also it doesn't show any deployment failure in the command line. Here is what it shows:
<May 20, 2013 10:32:51 AM IST> <Notice> <WebLogicServer> <BEA-000332> <Started W
ebLogic Managed Server "IPM_server1" for domain "base_domain123" running in Deve
lopment Mode>
<May 20, 2013 10:32:52 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server st
ate changed to RUNNING>
<May 20, 2013 10:32:52 AM IST> <Notice> <WebLogicServer> <BEA-000360> <Server st
arted in RUNNING mode>
I feel there is some issue as this log is suggesting:
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173782> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
But I don't know how to resolve it.
Thanks
Pradeep

Similar Messages

  • Not able to see the accessories in IC Web Client and Web shop

    Hi All,
    we have configured Method Schema  for Product accessories and maintain the accessories in product master.
    I am facing an issue where in i cant see the accessories in IC Web Client and webshop.
    Any input will be a great help.
    Thanks in advance.
    DV.

    I'm answering this only because I just ran into this yesterday.
    Apparently, the Accessories you add to the Product Master have to be added to the item in the Product Catalog. 
    In the Item view of the catalog, click on the Edit List of Accessories button.  The accessories that you added to the Product Master show up on the right side of the window.  Select the accessories you want to show on the Webshop (and I assume IC Web Client) and click the move (left arrow) button.  Save, replicate, etc...
    Now, if someone knows how to avoid this step, please share it, as I find it annoying that while I can get the accessories to the Product Master easy enough, I can't get them to the Webshop without an extra step FOR EACH ITEM in the catalog(s).

  • Not able to access the URL for this web service (BPR)

    1. Start SAP Solution Manager and call transaction SICF.
    2. Right-click on default_host/sap/bc/solman, for example, and
    select Enable service. When the service is enabled, additional
    subgroups are visible.
    Enabling reveals the URI of the Web service. In this case, it is
    /sap/bc/solman/bpr. The protocol type is http. If you right-click
    on bpr and select Display service i got the below error
    <soap:Envelope soap:encodingStyle="http://schemas.xmlsoap.org/soap/encoding">
    <soap:Header/>
    u2212
    <soap:Body>
    u2212
    <soap:Fault>
    <soap:faultcode>Client</soap:faultcode>
    <soap:faultstring>Missing SOAP envelope.</soap:faultstring>
    </soap:Fault>
    </soap:Body>
    </soap:Envelop
    Regards,
    Neni

    Hello Neni,
    In most circumstances this error was caused by incorrect customizing, an external alias for the default host /sap/bc/solman/defaultuser had an incorrect target handler assigned to it.
    Solution Manager's IMG and documentation (www.service.sap.com/solutionmanager) should detail the correct
    value to use.
    The correct values can be maintained in SICF.
    On top of this, please review the following URL for external aliases documentation:
    http://help.sap.com/saphelp_sm40/helpdata/en/78/9852bdc06b11d4ad310000e83539c3/frameset.htm
    Thanks,
    Mark

  • Not able to access the multi-source universe in WebI

    Hi
    I am not able to access the multi-source universe in WebI, getting below error message.
    [Data Federator Driver] Unexpected exception: com.crystaldecisions.thirdparty.org.omg.CORBA.UNKNOWN: null | [Data Federator Driver] Failed to connect to any of the provided 'Central Management Server' hosts.
    And also Not able to perform anything to designing multi-source universe in business Layer.
    Universe back-end is
    Oracle 11g and
    SQL2008 DB
    Version IDT: 4.1 Support Pack 2
    SAP BusinessObjects BI Platform 4.1 Support Pack 2,

    Hi Sreeni,
    You can create a new APS in CMC containing the Data Federation Service with
    -Xmx2g -> 8g (This is the suggested range)
    Make sure you remove this service from the existing APS and then create a new one.
    You could refer SAP KBA 1694041 - BI 4.x Consulting:- How to size the Adaptive Processing
    Server (APS) which would assist you in sizing the APS.
    Regards,
    Manpreet

  • Not able to access the Database & Clusterware from OEM Console.

    hi,
    I had installed Oracle RAC 11g R2 in RHEL 5.3 Operating environment. I had installed my Oracle RAC with Enterprise Manager Console.
    Its with the defailt port 1158. After the installation when i try to access my EM Console, i was not able to access the Database and Clusterware from EM Console.
    When i access the EM console with url, I found with Startup and Perform Recovery option. But whereas my database is already startup and running.
    So when i click startup its saying database is already started. Since it is a prodution environment i dont want to go with Perform recovery option.
    Please tell me hw to attach files in this thread so that i can send the snap shot of the console for your reference.
    with regards
    A.Aravind
    Edited by: 795847 on Sep 21, 2010 10:40 PM

    hi,
    As mentioned due to not having the default listener port 1521, we are facing this problem.
    As meniotned i had changed the emoms.properties file and changed the port and my emctl page is opening.
    But am not able to access the other parameters like ASM, Servers, Clusters etc bcoz since in some file it is looking for 1521 default port.
    So is it better to go for emctl deconfig and config again or to change the port the files which required.
    If i do in what are the file the default port will be located related to emctl.
    with regards
    A.Aravind

  • Not able to Start the oracle db error "ORA-01031: insufficient privileges"

    Hi experts,
    I have oracle 11g setup on so solaris. i changed the db_cache_size
    & processes values and stopped the DB services after that i am not able to start the oracle DB. Listener is running.
    when i start the db server its giving the below error(startup.log)
    ./dbstart: Starting up database "orcl"
    Mon Sep 27 04:31:08 MDT 2010
    SQL*Plus: Release 11.1.0.7.0 - Production on Mon Sep 27 04:31:08 2010
    Copyright (c) 1982, 2008, Oracle. All rights reserved.
    SQL> ERROR:
    ORA-01031: insufficient privileges
    SQL> ORA-01031: insufficient privileges
    SQL>
    ./dbstart: Database instance "orcl" warm started.
    Please help me to ressolve this issue.
    Thanks
    Krishna

    yes, password file is there in /etc/passwd
    here are the contents:
    root:x:0:0:Super-User:/:/sbin/sh
    lroot:x:0:0:Super-User:/:/sbin/sh
    daemon:x:1:1::/:
    bin:x:2:2::/usr/bin:/bin/false
    sys:x:3:3::/:
    adm:x:4:4:Admin:/var/adm:/bin/false
    lp:x:71:8:Line Printer Admin:/usr/spool/lp:/bin/false
    uucp:x:5:5:uucp Admin:/usr/lib/uucp:/bin/false
    nuucp:x:9:9:uucp Admin:/var/spool/uucppublic:/usr/lib/uucp/uucico
    listen:x:37:4:Network Admin:/usr/net/nls:/bin/false
    nobody:x:60001:60001:Nobody:/:/bin/false
    noaccess:x:60002:60002:No Access User:/:/bin/false
    nobody4:x:65534:65534:SunOS 4.x Nobody:/:/bin/false
    itunix:x:50000:14:IT Unix Account:/export/home/itunix:/bin/csh
    hharika:x:765:38:Harpal Harika:/export/home/hharika:/bin/csh
    prsingh:x:795:38:Pradeep Singh:/export/home/prsingh:/bin/csh
    mmir:x:1229:21:Mir Monis Ali:/export/home/mmir:/bin/csh
    bogunnai:x:1207:21:Bose Ogunnaike:/export/home/bogunnai:/bin/ksh
    mpokala:x:2117:21:Mahesh Pokala:/export/home/mpokala:/bin/ksh
    apopov:x:2385:38:Anton Popov:/export/home/apopov:/bin/csh
    kkeith:x:2629:227:Kevin Keith:/home/kkeith:/usr/bin/ksh
    sshd:x:22:22:SSH Privsep:/var/empty:/bin/false
    patrol:x:2784:10:Patrol User:/opt/bmc:/usr/bin/ksh
    smmsp:x:25:25:Sendmail Submission user:/none:/bin/false
    ldap:x:50001:1002::/export/home/ldap:/bin/sh
    perfuser:x:884:268::/export/home/perfuser:/bin/csh
    webservd:x:80:80::/home/webservd:/bin/pfsh
    oracle:x:156:40:Oracle Software Owner:/export/home/oracle:/bin/bash
    perfuser_idc:x:64383:1::/home/perfuser_idc:/bin/sh
    idc_perf:x:64384:292::/home/idc_perf:/bin/sh

  • User has contribute access but he is not able to access the site collection...

    User has contribute access but he is not able to access the site collection...

    What error does he get.
    Can you share fiddler trace(check if any 404 error)
    what error do we see in ULS Logs
    Create disableloopback
    registry on server
    http://support.microsoft.com/kb/926642/en-us

  • Not able to access the internet SOlaris 10

    I have installed solaris 10 and it is in subnet but no router. I was not able to access the internet.
    hostname.e1000g0
    hostname.hme0
    hostname6.e1000g0
    When I create the file dhcp.e1000g0 internet works but the hostname becomes unknown.
    Can someone please help me ?

    route add default 192.168.1.55 (Ipaddress of default gateway)
    DHCP able to find it dynamically but once dhcp is off we need to mention it.
    Makes it work.

  • I do not have a Mac but I want to give a software program for a Mac as a gift. I am not able to access the Mac store. Do I just get an iTunes card?

    I do not have a Mac but I want to give a software program for a Mac as a gift. I am not able to access the Mac store. Do I just get an iTunes card?

    "Gift Card" is sometimes called a tacky gift, but if it allows the other person to get whatever they want it works.
    Besides, anything purchased through App Store is usually "All Sales Final", so I think iTunes card is a good idea.

  • I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc. I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting fo

    I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc.
    I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting for it to work.
    Can you please help me with this?
    Thanks Matthew.

    Hello,
    The services you listed in your post will require a data plan which is provisioned by your wireless provider. You may want to contact your wireless provider to see if you have the correct plan.
    Cheers,
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • I am not able to access the sharepoint:80 site using the local IP address.

     I am able to access the Central administration using the Local LAN IP address and the port number, but, I am not able to access the sharepoint:80 site using the same local IP address without the port for the central administration. I tried adding
    the local IP address in the Alternative Access Mapping to no avail. Any ideas, where I should look, is much appreciated.

    Hi，
    By my test, I set the Alternative Access Mapping for the SharePoint 80 port web application as below and it works fine:
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Eric Tao
    TechNet Community Support

  • I am not able to access the internet without wi-fi after updated to iOS 7.0.4. Please help!

    I am not able to access the internet without wi-fi after updated to iOS 7.0.4. Please help!

    Hello sweetracy,
    The following article can help restore and stabilize your cellular data connection.
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/TS3780
    Cheers,
    Allen

  • I am not able to access the "featured" and "top charts" in the app store

    I am not able to access the "featured" and "top charts" icons in the app store.  Everything else works fine.

    Here I am using Java Type IV for database
    connection.
    So,there was no necessity of creating DNS.How your app communicates with db shouldn't matter for the end user. Still, you may want to use a functional network name also for the thin client driver connection string.
    So,is there any other way to solve this problem.What is the problem really? Do you not use dns for network naming? Maybe you have to manage the hosts file on every client then.

  • I am not able to access the App Store on my Iphone 3GS with IOS 6.01, however i can access the same on my laptop when i connect my phone to my PC. Any suggestions on this.

    I am not able to access the App Store on my Iphone 3GS with IOS 6.01, however i can access the same on my laptop when i connect my phone to my PC. Any suggestions on this.

    varunsharmaapplefan
    http://support.apple.com/kb/ht5209 might help you.  An iPhone 4 can airplay content from apps that support airplay and iTunes but it cannot mirror.  If your game does not have airplay in the app you cannot mirror it to the apple TV so I don't know if you can play just the music.  You should have no problem playing your iTunes over airplay though.
    This may also help http://support.apple.com/kb/HT4437
    Regards
    Jules 

  • I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

    I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."

Maybe you are looking for