Not able to access the portal login page and idenetity console page

Hi all.
I installed PS 6.1 on a new Solaris 8 Box. DNS is not configured for this box.
I use netscape browser on the solaris boz to test my installation - everything is fine
issue:
When i tried to access the amconsole or amserver/UI/Login application, it bombs with the following exception.
but i can see the default webserver page (or any static html for that matter).
any clue?
10/28/2003 03:22:22:776 PM EET: Thread[Thread-195,5,main]
ERROR: Exception occured
java.lang.Exception: Service URL not found:session
at com.iplanet.services.naming.WebtopNaming.getServiceURL(WebtopNaming.java:180)
at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:686)
at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:668)
at com.iplanet.dpro.session.Session.getSession(Session.java:540)
at com.iplanet.sso.providers.dpro.SSOProviderImpl.createSSOToken(SSOProviderImpl.java:73)
at com.iplanet.sso.SSOTokenManager.createSSOToken(SSOTokenManager.java:280)
at com.sun.identity.authentication.service.AuthUtils.getOrigLoginURL(AuthUtils.java:1546)
at com.sun.identity.authentication.UI.LoginViewBean.forwardTo(LoginViewBean.java:253)
at com.iplanet.jato.ApplicationServletBase.dispatchRequest(ApplicationServletBase.java:783)
at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:434)
at com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:312)
at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:282)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:919)
at com.iplanet.server.http.servlet.WebApplication.service(WebApplication.java:1061)
at com.iplanet.server.http.servlet.NSServletRunner.ServiceWebApp(NSServletRunner.java:981)

I am facing the same problem. I am using Custom Authentication module. When I access the login page for this custom authentication module I got this error. I have DNS entry and added the IP Adress in the host file too. Anyone tell us, what could be the problem?

Similar Messages

Not able to access the portal on the network - (RedHat Enterprise Linux 5).

Friends,
I have installed the portal(7.1) on a linux(RHEL 5) box.I am able to access the portal locally and everything looks fine.
However when I try accessing the portal on the network...I get "page cannot be displayed" as if the server is not listning on 8080.
when I do "GET http://rexportal.davita.corp:8080" I get ........
500 Can't connect to rexportal.davita.corp:8080 (connect: No route to host)
what does this mean?
other info:
1) I have disbaled the firewall by setting SELinux to disabled.
2)I am able to traceroute to the m/c
3) can ftp and SSH
4) When I do "GET http://rexportal.davita.corp" I see a apache server page.It means apache server is accessible at port 80 on the network.
Can you plz help me resolve this issue.what can prevent my server not being accesible across the network
Thanks!!
Deepak.

I was able to resolve this.! basically It was a firewall issue.
To help othere here is what I found.
I had disabled the SELinux utility which should have basically disabled the firewall service but It didnt stop it.
You can check If the firewall is running with following command on redhat linux.
service iptables status
If it is enabled ,you can either stop it by
/etc/init.d/iptables stop (not recommended -- for security)
or
you can add a entry for the port you want to enable by modifying the file
/etc/sysconfig/iptables
Hope it might be helpful !
Thanks,
Deepak.

Not Able to Access the Properties of Workspace and Target

Hello
I have install PB 11.2 Build 9027 on my laptop ( Winows 7 (64 bit))). PowerBuilde is open and able to see the existing code.
But when I am trying to access the properties of Workspace or target for Source code control Setup, Properties will not come and nothing happen, I am not able to view the properties of Workspace and targets.
One more think I notice ,when I was trying to create new application (File > New > Target Tab > Application) then window will not open.
Please provide me some suggestion on this issue.
Thanks
Amit Maheshwari

Hi,
You might find a much larger audience for technical questions if you open a discussion at the PowerBuilder Developer Center
PowerBuilder Developer Center
Thanks,
Ben

Not able to access the links to Planning and Shared Services

Hi,
I am trying to access the links to Planning and Shared Services but I get the following error message.
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I tried to restart all the services on all the servers and also restarted the servers but it didn't work.
Please let me know how to fix this issue. Also please let me know where else can I find the logs to the errors.
Thanks.

The logs would be a good place to start, if you are not sure where to look post your OS and planning version.
Cheers
John
http://john-goodwin.blogspot.com/

Why am I not able to access the app store, itunes and safari since upgrading to Mavericks 10.9?

IT tells me they would have to revert to the old OS which they don't want to do or can't do? I have been two months without access. I am at a loss. any help or guidance would be appreciated. I work for state government and our servers are PC-based which I think where the problem is. Is there a work around to gain access to the app store, itunes and safari. The app store icon indicates I have updates available but I am stuck. Please advise.

I know safari is mac's native browser. Since updating to OSX10.9, I have not been able to open safari. Firefox works fine but I preferred safari. Safari just won't open, it acts like it wants to, but the progress bar goes about half way across and stops. What other information do I need to supply?
This is a very frustrating problem when I see that there are updates to apply, but am unable to open the app store to get them. I can't even see them.
IT, in my opinion, has almost thrown in the towel since they are more PC-based.I believe it is a connection problem but they have been unable to fix it. They blame mac for a hasty upgrade release that was not fully tested to see if there were any Mac/PC connection issues.
Thanks for any help you can provide.

I'm not able to access the thumbnails of my open web pages. Why?

I'm not able to access the thumbnails of my open web pages. Why?

Oh ok, that explains it. Thank you so much. I'm still getting use to my ipad2. I've only had it for about three weeks

The server principal "XYuser" is not able to access the database "Ydb" under the current security context

SQL2005 on winserver 2003. I have a view in Xdb that accesses tables in 2 different databases (Xdb and Ydb) on the same server. I have mixed mode security. I have a SQL user (XYuser) that has read access to all tables and views on both databases, yet when I try to access the view using a C# windows application I get the following error:
The server principal "XYuser" is not able to access the database "Ydb" under the current security context
This same scenario works under SQL 2000. I looked through the postings and tried to set TRUSTWORTHY ON on both databases but that didn't help. I can access any other views or tables on the SQL 2005 server, just not the one that joins the tables cross databases. Any help is much appreciated... john

This appears to be a Login/Database Mapping issue. I was having this problem, but was able to resolve it as follows:
Using the SQL Server management Studio:
In the Object explorer, under the SERVER security folder (not the database security folder), expand Logins.
That is: ServerName -> Security -> Logins
NOT: ServerName -> Databases -> DatabaseName -> Security -> Users
Select the Login that is having the troubles. Right click on the Login and select ‘Properties.’
The ‘User Mapping’ page should list all databases on the server with a check mark on the databases that the Login has been mapped to. When I was getting the error, the database in question was not checked (even though the Login was assigned as a User on the database itself). Map the Login by checking the box next to the database name. Set the default schema. Then select the roles for the Login in the Database role membership list box. I selected db_datareader and public. After clicking OK to save the changes, the problem was resolved.
In order to ‘Map’ the Login, the Login must not already be as User on the database, so you may have to go to the database security (ServerName -> Databases -> DatabaseName -> Security -> Users) and delete the Login from the list of database Users before mapping the Login to the database.

Not able to access the Database & Clusterware from OEM Console.

hi,
I had installed Oracle RAC 11g R2 in RHEL 5.3 Operating environment. I had installed my Oracle RAC with Enterprise Manager Console.
Its with the defailt port 1158. After the installation when i try to access my EM Console, i was not able to access the Database and Clusterware from EM Console.
When i access the EM console with url, I found with Startup and Perform Recovery option. But whereas my database is already startup and running.
So when i click startup its saying database is already started. Since it is a prodution environment i dont want to go with Perform recovery option.
Please tell me hw to attach files in this thread so that i can send the snap shot of the console for your reference.
with regards
A.Aravind
Edited by: 795847 on Sep 21, 2010 10:40 PM

hi,
As mentioned due to not having the default listener port 1521, we are facing this problem.
As meniotned i had changed the emoms.properties file and changed the port and my emctl page is opening.
But am not able to access the other parameters like ASM, Servers, Clusters etc bcoz since in some file it is looking for 1521 default port.
So is it better to go for emctl deconfig and config again or to change the port the files which required.
If i do in what are the file the default port will be located related to emctl.
with regards
A.Aravind

Not able to access Site logo from layout and css After removing all the permission from site

Hi Techis,
I have stucked here, actually I have removed permissions from all the users from the site and after sometime I got the mails from client that they are not able to access the Site logo and css in the site.
When I logged from Farm account and checked I can see everything working fine.Also the masterpage and all are checked in
I am not getting whats the exact issue.I stucked here from last one day Please help me to solve this issue.
Thanks Regards,
Simanchal

Hello,
Is it the publishing site? If so then go to site permission and provide permission to "NT AUTHORITY\authenticated users" to "Style Resource Readers" group.
You also need to make sure that "style library" is inheriting permission from parent otherwise you need to give at least read permission to library for all users. To verify this, just open view all site content page-->then click on style library,then
check permission.
Let us know your result
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

User has contribute access but he is not able to access the site collection...

User has contribute access but he is not able to access the site collection...

What error does he get.
Can you share fiddler trace(check if any 404 error)
what error do we see in ULS Logs
Create disableloopback
registry on server
http://support.microsoft.com/kb/926642/en-us

I have inadvertently infringe copyright on facebook and they have subsequently barred me from uploading any more videos. The question I need answered is ( and not able to find the answer on any of you help pages)..... Do the following have free copyright

I have inadvertently infringe copyright on facebook and they have subsequently barred me from uploading any more videos.
The question I need answered is ( and not able to find the answer on any of you help pages).....
Do the following have free copyright to publish on facebook and U Tube?
1.Garage band sounds?
2.Slide show...Sample music and Theme music?
3.iMovie...iMovie sounds and iLife sounds ie.Medal Ceremony and Memorial etc?
I note one can publish to shared net places directly from iMovie so one assumes these are copyright free for non-profit making and non-comercial use.
It is impossible to contact apple direct.No email address.We put our selves at risk without this knowledge and like applemac, facebook will not communicate direct.Will applemac please take responsibility for copyright/the above that they are all too willing to sell to us but not support us with that knowledge.
I have Mac OS X Snow Leopard version 10.6.2 (2009 bought in 2010)

Thank you Klaus1.The large font, I copied and pasted from my mail box.I'm visually impaired...not to a huge degree but it helps to use the large font.I believe you are right about the copyright on the imac stuff but if facebook decide otherwise, you have to reply electronically to their challenge.If you can't provide a reference directly from the copyright owner then they remove the video.I believe this is a programmed response and no human is involved which now makes it impossible for me to get my video uploading restored.They detect added soundtrack automatically and then challenge.There are many others in the same boat and facebook will not communicate.They have various discussion sites on which I have left messages including Mark Zuckerbergs own facebook but I don't think anyone from facebook ever reads them.I intend to start a second facebook which I can use purely to get my videos uploaded as a lot of my friends enjoy them BUT don't want fall foul of their programming again.If only iMac would put something on the net to this effect.I think it is so unfair that with modern technology it is impossible to contact these large conglomerates personally and receive an email response.I tried emailing [email protected] but I got a failure notice.If you have any ideas on how to get verification from apple direct, I would be very grateful.Thank You.

Not able to access the mx.controls package

hi,
i found a weird issue. I'm developing my application
entirely using actionscript 3 by creating "actionscript Project' in
the flex builder. I need to use the ColorPicker component which is
under mx.controls package, but to my disappointment i'm not able to
access that mx.controls package and when i forcefully use it the
compiler throws me an error, but when i create a new flex project
and create an asctionscript file, i'm able to access that
mx.controls package and also the ColorPicker class. Can anyone tell
me what the problem is?
Thanks,
Shajahan

I am having the same issue. I'm using Flex 3 and I cannot
access the mx.controls package in any actionscript project.

Not able to access the multi-source universe in WebI

Hi
I am not able to access the multi-source universe in WebI, getting below error message.
[Data Federator Driver] Unexpected exception: com.crystaldecisions.thirdparty.org.omg.CORBA.UNKNOWN: null | [Data Federator Driver] Failed to connect to any of the provided 'Central Management Server' hosts.
And also Not able to perform anything to designing multi-source universe in business Layer.
Universe back-end is
Oracle 11g and
SQL2008 DB
Version IDT: 4.1 Support Pack 2
SAP BusinessObjects BI Platform 4.1 Support Pack 2,

Hi Sreeni,
You can create a new APS in CMC containing the Data Federation Service with
-Xmx2g -> 8g (This is the suggested range)
Make sure you remove this service from the existing APS and then create a new one.
You could refer SAP KBA 1694041 - BI 4.x Consulting:- How to size the Adaptive Processing
Server (APS) which would assist you in sizing the APS.
Regards,
Manpreet

Not able to access the internet SOlaris 10

I have installed solaris 10 and it is in subnet but no router. I was not able to access the internet.
hostname.e1000g0
hostname.hme0
hostname6.e1000g0
When I create the file dhcp.e1000g0 internet works but the hostname becomes unknown.
Can someone please help me ?

route add default 192.168.1.55 (Ipaddress of default gateway)
DHCP able to find it dynamically but once dhcp is off we need to mention it.
Makes it work.

I do not have a Mac but I want to give a software program for a Mac as a gift. I am not able to access the Mac store. Do I just get an iTunes card?

I do not have a Mac but I want to give a software program for a Mac as a gift. I am not able to access the Mac store. Do I just get an iTunes card?

"Gift Card" is sometimes called a tacky gift, but if it allows the other person to get whatever they want it works.
Besides, anything purchased through App Store is usually "All Sales Final", so I think iTunes card is a good idea.

Not able to access the portal login page and idenetity console page

Similar Messages

Maybe you are looking for