Not Able to Access the Properties of Workspace and Target

Hello
I have install PB 11.2 Build 9027 on my laptop ( Winows 7 (64 bit))). PowerBuilde is open and able to see the existing code.
But when I am trying to access the properties of Workspace or target for Source code control Setup, Properties will not come and nothing happen, I am not able to view the properties of Workspace and targets.
One more think I notice ,when I was trying to create new application (File > New > Target Tab > Application) then window will not open.
Please provide me some suggestion on this issue.
Thanks
Amit Maheshwari

Hi,
You might find a much larger audience for technical questions if you open a discussion at the PowerBuilder Developer Center
PowerBuilder Developer Center
Thanks,
Ben

Similar Messages

Not able to access the links to Planning and Shared Services

Hi,
I am trying to access the links to Planning and Shared Services but I get the following error message.
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I tried to restart all the services on all the servers and also restarted the servers but it didn't work.
Please let me know how to fix this issue. Also please let me know where else can I find the logs to the errors.
Thanks.

The logs would be a good place to start, if you are not sure where to look post your OS and planning version.
Cheers
John
http://john-goodwin.blogspot.com/

Why am I not able to access the app store, itunes and safari since upgrading to Mavericks 10.9?

IT tells me they would have to revert to the old OS which they don't want to do or can't do? I have been two months without access. I am at a loss. any help or guidance would be appreciated. I work for state government and our servers are PC-based which I think where the problem is. Is there a work around to gain access to the app store, itunes and safari. The app store icon indicates I have updates available but I am stuck. Please advise.

I know safari is mac's native browser. Since updating to OSX10.9, I have not been able to open safari. Firefox works fine but I preferred safari. Safari just won't open, it acts like it wants to, but the progress bar goes about half way across and stops. What other information do I need to supply?
This is a very frustrating problem when I see that there are updates to apply, but am unable to open the app store to get them. I can't even see them.
IT, in my opinion, has almost thrown in the towel since they are more PC-based.I believe it is a connection problem but they have been unable to fix it. They blame mac for a hasty upgrade release that was not fully tested to see if there were any Mac/PC connection issues.
Thanks for any help you can provide.

Not able to access the portal login page and idenetity console page

Hi all.
I installed PS 6.1 on a new Solaris 8 Box. DNS is not configured for this box.
I use netscape browser on the solaris boz to test my installation - everything is fine
issue:
When i tried to access the amconsole or amserver/UI/Login application, it bombs with the following exception.
but i can see the default webserver page (or any static html for that matter).
any clue?
10/28/2003 03:22:22:776 PM EET: Thread[Thread-195,5,main]
ERROR: Exception occured
java.lang.Exception: Service URL not found:session
at com.iplanet.services.naming.WebtopNaming.getServiceURL(WebtopNaming.java:180)
at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:686)
at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:668)
at com.iplanet.dpro.session.Session.getSession(Session.java:540)
at com.iplanet.sso.providers.dpro.SSOProviderImpl.createSSOToken(SSOProviderImpl.java:73)
at com.iplanet.sso.SSOTokenManager.createSSOToken(SSOTokenManager.java:280)
at com.sun.identity.authentication.service.AuthUtils.getOrigLoginURL(AuthUtils.java:1546)
at com.sun.identity.authentication.UI.LoginViewBean.forwardTo(LoginViewBean.java:253)
at com.iplanet.jato.ApplicationServletBase.dispatchRequest(ApplicationServletBase.java:783)
at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:434)
at com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:312)
at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:282)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:919)
at com.iplanet.server.http.servlet.WebApplication.service(WebApplication.java:1061)
at com.iplanet.server.http.servlet.NSServletRunner.ServiceWebApp(NSServletRunner.java:981)

I am facing the same problem. I am using Custom Authentication module. When I access the login page for this custom authentication module I got this error. I have DNS entry and added the IP Adress in the host file too. Anyone tell us, what could be the problem?

Not able to access the Database & Clusterware from OEM Console.

hi,
I had installed Oracle RAC 11g R2 in RHEL 5.3 Operating environment. I had installed my Oracle RAC with Enterprise Manager Console.
Its with the defailt port 1158. After the installation when i try to access my EM Console, i was not able to access the Database and Clusterware from EM Console.
When i access the EM console with url, I found with Startup and Perform Recovery option. But whereas my database is already startup and running.
So when i click startup its saying database is already started. Since it is a prodution environment i dont want to go with Perform recovery option.
Please tell me hw to attach files in this thread so that i can send the snap shot of the console for your reference.
with regards
A.Aravind
Edited by: 795847 on Sep 21, 2010 10:40 PM

hi,
As mentioned due to not having the default listener port 1521, we are facing this problem.
As meniotned i had changed the emoms.properties file and changed the port and my emctl page is opening.
But am not able to access the other parameters like ASM, Servers, Clusters etc bcoz since in some file it is looking for 1521 default port.
So is it better to go for emctl deconfig and config again or to change the port the files which required.
If i do in what are the file the default port will be located related to emctl.
with regards
A.Aravind

The server principal "XYuser" is not able to access the database "Ydb" under the current security context

SQL2005 on winserver 2003. I have a view in Xdb that accesses tables in 2 different databases (Xdb and Ydb) on the same server. I have mixed mode security. I have a SQL user (XYuser) that has read access to all tables and views on both databases, yet when I try to access the view using a C# windows application I get the following error:
The server principal "XYuser" is not able to access the database "Ydb" under the current security context
This same scenario works under SQL 2000. I looked through the postings and tried to set TRUSTWORTHY ON on both databases but that didn't help. I can access any other views or tables on the SQL 2005 server, just not the one that joins the tables cross databases. Any help is much appreciated... john

This appears to be a Login/Database Mapping issue. I was having this problem, but was able to resolve it as follows:
Using the SQL Server management Studio:
In the Object explorer, under the SERVER security folder (not the database security folder), expand Logins.
That is: ServerName -> Security -> Logins
NOT: ServerName -> Databases -> DatabaseName -> Security -> Users
Select the Login that is having the troubles. Right click on the Login and select ‘Properties.’
The ‘User Mapping’ page should list all databases on the server with a check mark on the databases that the Login has been mapped to. When I was getting the error, the database in question was not checked (even though the Login was assigned as a User on the database itself). Map the Login by checking the box next to the database name. Set the default schema. Then select the roles for the Login in the Database role membership list box. I selected db_datareader and public. After clicking OK to save the changes, the problem was resolved.
In order to ‘Map’ the Login, the Login must not already be as User on the database, so you may have to go to the database security (ServerName -> Databases -> DatabaseName -> Security -> Users) and delete the Login from the list of database Users before mapping the Login to the database.

User has contribute access but he is not able to access the site collection...

User has contribute access but he is not able to access the site collection...

What error does he get.
Can you share fiddler trace(check if any 404 error)
what error do we see in ULS Logs
Create disableloopback
registry on server
http://support.microsoft.com/kb/926642/en-us

Not able to access the mx.controls package

hi,
i found a weird issue. I'm developing my application
entirely using actionscript 3 by creating "actionscript Project' in
the flex builder. I need to use the ColorPicker component which is
under mx.controls package, but to my disappointment i'm not able to
access that mx.controls package and when i forcefully use it the
compiler throws me an error, but when i create a new flex project
and create an asctionscript file, i'm able to access that
mx.controls package and also the ColorPicker class. Can anyone tell
me what the problem is?
Thanks,
Shajahan

I am having the same issue. I'm using Flex 3 and I cannot
access the mx.controls package in any actionscript project.

Not able to access the multi-source universe in WebI

Hi
I am not able to access the multi-source universe in WebI, getting below error message.
[Data Federator Driver] Unexpected exception: com.crystaldecisions.thirdparty.org.omg.CORBA.UNKNOWN: null | [Data Federator Driver] Failed to connect to any of the provided 'Central Management Server' hosts.
And also Not able to perform anything to designing multi-source universe in business Layer.
Universe back-end is
Oracle 11g and
SQL2008 DB
Version IDT: 4.1 Support Pack 2
SAP BusinessObjects BI Platform 4.1 Support Pack 2,

Hi Sreeni,
You can create a new APS in CMC containing the Data Federation Service with
-Xmx2g -> 8g (This is the suggested range)
Make sure you remove this service from the existing APS and then create a new one.
You could refer SAP KBA 1694041 - BI 4.x Consulting:- How to size the Adaptive Processing
Server (APS) which would assist you in sizing the APS.
Regards,
Manpreet

Not able to access the internet SOlaris 10

I have installed solaris 10 and it is in subnet but no router. I was not able to access the internet.
hostname.e1000g0
hostname.hme0
hostname6.e1000g0
When I create the file dhcp.e1000g0 internet works but the hostname becomes unknown.
Can someone please help me ?

route add default 192.168.1.55 (Ipaddress of default gateway)
DHCP able to find it dynamically but once dhcp is off we need to mention it.
Makes it work.

I do not have a Mac but I want to give a software program for a Mac as a gift. I am not able to access the Mac store. Do I just get an iTunes card?

I do not have a Mac but I want to give a software program for a Mac as a gift. I am not able to access the Mac store. Do I just get an iTunes card?

"Gift Card" is sometimes called a tacky gift, but if it allows the other person to get whatever they want it works.
Besides, anything purchased through App Store is usually "All Sales Final", so I think iTunes card is a good idea.

I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc. I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting fo

I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc.
I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting for it to work.
Can you please help me with this?
Thanks Matthew.

Hello,
The services you listed in your post will require a data plan which is provisioned by your wireless provider. You may want to contact your wireless provider to see if you have the correct plan.
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

I am not able to access the sharepoint:80 site using the local IP address.

I am able to access the Central administration using the Local LAN IP address and the port number, but, I am not able to access the sharepoint:80 site using the same local IP address without the port for the central administration. I tried adding
the local IP address in the Alternative Access Mapping to no avail. Any ideas, where I should look, is much appreciated.

Hi，
By my test, I set the Alternative Access Mapping for the SharePoint 80 port web application as below and it works fine:
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

I am not able to access the internet without wi-fi after updated to iOS 7.0.4. Please help!

I am not able to access the internet without wi-fi after updated to iOS 7.0.4. Please help!

Hello sweetracy,
The following article can help restore and stabilize your cellular data connection.
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/TS3780
Cheers,
Allen

I am not able to access the "featured" and "top charts" in the app store

I am not able to access the "featured" and "top charts" icons in the app store. Everything else works fine.

Here I am using Java Type IV for database
connection.
So,there was no necessity of creating DNS.How your app communicates with db shouldn't matter for the end user. Still, you may want to use a functional network name also for the thin client driver connection string.
So,is there any other way to solve this problem.What is the problem really? Do you not use dns for network naming? Maybe you have to manage the hosts file on every client then.

Not Able to Access the Properties of Workspace and Target

Similar Messages

Maybe you are looking for