Not able to access the URL for this web service (BPR)

1. Start SAP Solution Manager and call transaction SICF.
2. Right-click on default_host/sap/bc/solman, for example, and
select Enable service. When the service is enabled, additional
subgroups are visible.
Enabling reveals the URI of the Web service. In this case, it is
/sap/bc/solman/bpr. The protocol type is http. If you right-click
on bpr and select Display service i got the below error
<soap:Envelope soap:encodingStyle="http://schemas.xmlsoap.org/soap/encoding">
<soap:Header/>
u2212
<soap:Body>
u2212
<soap:Fault>
<soap:faultcode>Client</soap:faultcode>
<soap:faultstring>Missing SOAP envelope.</soap:faultstring>
</soap:Fault>
</soap:Body>
</soap:Envelop
Regards,
Neni

Hello Neni,
In most circumstances this error was caused by incorrect customizing, an external alias for the default host /sap/bc/solman/defaultuser had an incorrect target handler assigned to it.
Solution Manager's IMG and documentation (www.service.sap.com/solutionmanager) should detail the correct
value to use.
The correct values can be maintained in SICF.
On top of this, please review the following URL for external aliases documentation:
http://help.sap.com/saphelp_sm40/helpdata/en/78/9852bdc06b11d4ad310000e83539c3/frameset.htm
Thanks,
Mark

Similar Messages

Not able to access the Oracle I/PM web client.

I have started the Administration server and the Oracle I/PM Managed Server. Now I'm trying to access the Oracle I/PM web client at this URL: http://hostname:16000/imaging. But when I hit this URL, the following error comes up:
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I'm also posting a part of the logs from the IPM_server log file:
####<May 20, 2013 10:32:52 AM IST> <Notice> <WebLogicServer> <01hw311161> <IPM_server1> <main> <<WLS Kernel>> <> <> <1369026172860> <BEA-000360> <Server started in RUNNING mode>
####<May 20, 2013 10:32:53 AM IST> <Info> <J2EE> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1369026173516> <BEA-160151> <Registered library Extension-Name: bea_wls_async_response (JAR).>
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173641> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceHttps for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173735> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceJms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173735> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseService for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173750> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Jms for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173766> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12 for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173782> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
####<May 20, 2013 10:33:51 AM IST> <Info> <Health> <01hw311161> <IPM_server1> <weblogic.GCMonitor> <<anonymous>> <> <> <1369026231604> <BEA-310002> <85% of the total memory in the server is free>
What configuration am I missing?
Thanks in advance
Pradeep

Hi Srinath,
I have checked that as well, it is showing the IPM_server in running mode.
Also it doesn't show any deployment failure in the command line. Here is what it shows:
<May 20, 2013 10:32:51 AM IST> <Notice> <WebLogicServer> <BEA-000332> <Started W
ebLogic Managed Server "IPM_server1" for domain "base_domain123" running in Deve
lopment Mode>
<May 20, 2013 10:32:52 AM IST> <Notice> <WebLogicServer> <BEA-000365> <Server st
ate changed to RUNNING>
<May 20, 2013 10:32:52 AM IST> <Notice> <WebLogicServer> <BEA-000360> <Server st
arted in RUNNING mode>
I feel there is some issue as this log is suggesting:
####<May 20, 2013 10:32:53 AM IST> <Info> <WebService> <01hw311161> <IPM_server1> <[STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <> <1369026173782> <BEA-220103> <Async web service support is not fully configured. The async response web service /AsyncResponseServiceSoap12Https for this server was not fully deployed because the JMS reliability queue was not defined/deployed: weblogic.wsee.DefaultQueue. The server will periodically retry completing the deploy for the service. This message can usually be ignored unless there are async web service applications. To completely disable async web service support, thus avoiding this message, set -Dweblogic.wsee.skip.async.response=true.>
But I don't know how to resolve it.
Thanks
Pradeep

Not able to access the application through URL in clustered environment.

Hi,
I recently depoyed my application on clustered environment of weblogic 8.1 SP4.
Now I am able to access the application through the managed server name with port number but not able to access through URL.
For ex
http://machine1:7001/test/login.do?m=begin
this is accessible
If I use
http://test.domain.com/test/login.do?m=begin
Then application is not accessible.
any HTML or JSP page page is in reach by both the URL.
Please suggest me what should I do in this regard.
thanks
singhV

Hi Syed,
I meant to ask are you able to see the application you created in Hyperion Planning Login page,if yes try accessing the created application through Hyperion Planning(Try restarting Planning Services once even if you are able to launch hyperion planning page) url "http://servername:8300/HyperionPlanning and selecting the application you created.
And also could you please let me know if you are logging in to workspace through admin username ? and also check if you are able to see the application in shared services and try to provision any group on that application.
(The Assumptions are if application is not created successfully then it will not be available in workspace to launch and if its in maintainance mode (Application Maintenance Mode) in Application Settings and last would be check OHS and Hyperion Planning Services)
Thanks
Amith

I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc. I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting fo

I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc.
I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting for it to work.
Can you please help me with this?
Thanks Matthew.

Hello,
The services you listed in your post will require a data plan which is provisioned by your wireless provider. You may want to contact your wireless provider to see if you have the correct plan.
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

I do not have a Mac but I want to give a software program for a Mac as a gift. I am not able to access the Mac store. Do I just get an iTunes card?

I do not have a Mac but I want to give a software program for a Mac as a gift. I am not able to access the Mac store. Do I just get an iTunes card?

"Gift Card" is sometimes called a tacky gift, but if it allows the other person to get whatever they want it works.
Besides, anything purchased through App Store is usually "All Sales Final", so I think iTunes card is a good idea.

I am not able to access the App Store on my Iphone 3GS with IOS 6.01, however i can access the same on my laptop when i connect my phone to my PC. Any suggestions on this.

I am not able to access the App Store on my Iphone 3GS with IOS 6.01, however i can access the same on my laptop when i connect my phone to my PC. Any suggestions on this.

varunsharmaapplefan
http://support.apple.com/kb/ht5209 might help you. An iPhone 4 can airplay content from apps that support airplay and iTunes but it cannot mirror. If your game does not have airplay in the app you cannot mirror it to the apple TV so I don't know if you can play just the music. You should have no problem playing your iTunes over airplay though.
This may also help http://support.apple.com/kb/HT4437
Regards
Jules

I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

I am not able to access the "Settings" on my iPad 3. I just get a gray screen for about 30 seconds and then the app shuts down. I am also unable to access the App store, iTunes, or any app requiring an internet connection. Any thoughts?

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."

Not able to access the Database & Clusterware from OEM Console.

hi,
I had installed Oracle RAC 11g R2 in RHEL 5.3 Operating environment. I had installed my Oracle RAC with Enterprise Manager Console.
Its with the defailt port 1158. After the installation when i try to access my EM Console, i was not able to access the Database and Clusterware from EM Console.
When i access the EM console with url, I found with Startup and Perform Recovery option. But whereas my database is already startup and running.
So when i click startup its saying database is already started. Since it is a prodution environment i dont want to go with Perform recovery option.
Please tell me hw to attach files in this thread so that i can send the snap shot of the console for your reference.
with regards
A.Aravind
Edited by: 795847 on Sep 21, 2010 10:40 PM

hi,
As mentioned due to not having the default listener port 1521, we are facing this problem.
As meniotned i had changed the emoms.properties file and changed the port and my emctl page is opening.
But am not able to access the other parameters like ASM, Servers, Clusters etc bcoz since in some file it is looking for 1521 default port.
So is it better to go for emctl deconfig and config again or to change the port the files which required.
If i do in what are the file the default port will be located related to emctl.
with regards
A.Aravind

I am not able to access the "featured" and "top charts" in the app store

I am not able to access the "featured" and "top charts" icons in the app store. Everything else works fine.

Here I am using Java Type IV for database
connection.
So,there was no necessity of creating DNS.How your app communicates with db shouldn't matter for the end user. Still, you may want to use a functional network name also for the thin client driver connection string.
So,is there any other way to solve this problem.What is the problem really? Do you not use dns for network naming? Maybe you have to manage the hosts file on every client then.

The server principal "XYuser" is not able to access the database "Ydb" under the current security context

SQL2005 on winserver 2003. I have a view in Xdb that accesses tables in 2 different databases (Xdb and Ydb) on the same server. I have mixed mode security. I have a SQL user (XYuser) that has read access to all tables and views on both databases, yet when I try to access the view using a C# windows application I get the following error:
The server principal "XYuser" is not able to access the database "Ydb" under the current security context
This same scenario works under SQL 2000. I looked through the postings and tried to set TRUSTWORTHY ON on both databases but that didn't help. I can access any other views or tables on the SQL 2005 server, just not the one that joins the tables cross databases. Any help is much appreciated... john

This appears to be a Login/Database Mapping issue. I was having this problem, but was able to resolve it as follows:
Using the SQL Server management Studio:
In the Object explorer, under the SERVER security folder (not the database security folder), expand Logins.
That is: ServerName -> Security -> Logins
NOT: ServerName -> Databases -> DatabaseName -> Security -> Users
Select the Login that is having the troubles. Right click on the Login and select ‘Properties.’
The ‘User Mapping’ page should list all databases on the server with a check mark on the databases that the Login has been mapped to. When I was getting the error, the database in question was not checked (even though the Login was assigned as a User on the database itself). Map the Login by checking the box next to the database name. Set the default schema. Then select the roles for the Login in the Database role membership list box. I selected db_datareader and public. After clicking OK to save the changes, the problem was resolved.
In order to ‘Map’ the Login, the Login must not already be as User on the database, so you may have to go to the database security (ServerName -> Databases -> DatabaseName -> Security -> Users) and delete the Login from the list of database Users before mapping the Login to the database.

Not able to access the multi-source universe in WebI

Hi
I am not able to access the multi-source universe in WebI, getting below error message.
[Data Federator Driver] Unexpected exception: com.crystaldecisions.thirdparty.org.omg.CORBA.UNKNOWN: null | [Data Federator Driver] Failed to connect to any of the provided 'Central Management Server' hosts.
And also Not able to perform anything to designing multi-source universe in business Layer.
Universe back-end is
Oracle 11g and
SQL2008 DB
Version IDT: 4.1 Support Pack 2
SAP BusinessObjects BI Platform 4.1 Support Pack 2,

Hi Sreeni,
You can create a new APS in CMC containing the Data Federation Service with
-Xmx2g -> 8g (This is the suggested range)
Make sure you remove this service from the existing APS and then create a new one.
You could refer SAP KBA 1694041 - BI 4.x Consulting:- How to size the Adaptive Processing
Server (APS) which would assist you in sizing the APS.
Regards,
Manpreet

I am not able to access the sharepoint:80 site using the local IP address.

I am able to access the Central administration using the Local LAN IP address and the port number, but, I am not able to access the sharepoint:80 site using the same local IP address without the port for the central administration. I tried adding
the local IP address in the Alternative Access Mapping to no avail. Any ideas, where I should look, is much appreciated.

Hi，
By my test, I set the Alternative Access Mapping for the SharePoint 80 port web application as below and it works fine:
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

I'm not able to access the thumbnails of my open web pages. Why?

I'm not able to access the thumbnails of my open web pages. Why?

Oh ok, that explains it. Thank you so much. I'm still getting use to my ipad2. I've only had it for about three weeks

Hi, I recently updated my iPhone 4 with the new OS 5. However, mid way now the laptop is not able to find the drivers for the iPhone. Please help

Hi, I recently updated my iPhone 4 with the new OS 5. However, mid way now the laptop is not able to find the drivers for the iPhone. Please help

Please search the forums. This has been covered here extensively.

User has contribute access but he is not able to access the site collection...

User has contribute access but he is not able to access the site collection...

What error does he get.
Can you share fiddler trace(check if any 404 error)
what error do we see in ULS Logs
Create disableloopback
registry on server
http://support.microsoft.com/kb/926642/en-us

Not able to access the URL for this web service (BPR)

Similar Messages

Maybe you are looking for