Not able to activate source system meta data
Hello,
For BW 3.5 The connection is working fine between source system and metadata is getting replicated successfully but in inactive mode.
While activating I get following error.
Incorrect IDoc type éâÄÃðôð@@@@@@@@@@@@@@@@@@@@@@@ in the ALE definition of the source system RSAR 373
Not sure what is wrong I have checked IDoc settings in both the systems they exists and the table RSBASIDOC has all the correct entries.
Thanks and Regards,
Milan
Hi,
Re-activate the source system in BW. That will recreate all the ALE settings. Make sure that the source system is open for changes and you use a user ID and password with appropriate auths for maintaining ALE settings.
after that
Try the restore option. Run check after that.
Regards,
San!
Similar Messages
-
Not able to find Source System in BI 7......
Hi All,
I am working on BI 7
I am exctracting the data from Flat File Source System like SMID(Characterstic) and PQTY,SALE,PROFIT as a KeyFigures
I have taken SMID as Characterstic and PQTY,SALE,PROFIT as a KeyFigures..
I hav created InfoObject Catalog for Characterstic and Keyfigures...
I Created a Application Componenet and Assigned Objects to InfoSource also...
But i struckked while assigning the Source System to the InfoSource...
I am not able to find how to assign the Source System like we do in 3.0b,3.1c & 3.5..
Can anybody tell me the Step by Step Navigation procedure for to assign Source System to the InfoSource and Other Things also....
Regards,
Kiran TelkarHi,
These are the settings needed for the broadcaster:
http://help.sap.com/saphelp_nw70/helpdata/en/55/1b9940ccd42a54e10000000a1550b0/frameset.htm
Eddy
PS. Reward useful answers and earn points yourself -
Not able to change source system connection
Hi, I have problems changing a source system connection from BW. BW is already connected to source system A, which is closed down, and I'd like to connect BW to source system B, which excists and can be accessed. I have tried to use BDLS, but get the message that System B already excists (new one). I try to delete it (Change view logical System), but am not allowed to do this. I get the message "must not be deleted, first delete from distribution model." And thats where I am stuck. Can anyone guide me on my way?
Regards E!Comment to the last answer:
When I try to delete in SALE I am told that the source system also excists in the Distribution Model (CUA) and can therefore not be deleted. It must be deleted in the distribution model first. I find CUA at BD64. Looks like this is the connection to Solution Manager. What are the consequences for deleting the Source System here? And will it hlep me to solve my problem, which is that I can't change my connection from Source System A to new Source System B?
Regards E -
Not Able to create Source system for MSS using DB Connect
hi All,
i am trying to create a source system for MSS(SQL Server) using DB Connect.
CAN I KNOW THE ENTIRE PROCEDURE FROM BOTH THE ENDS?
like how you create the user in SQL Server and
Do WE NEED ANY ADD-ONS in BW SYSTEM and the Connection Parameters..
needed immediate HELP...
ADVANCE THANKS TO ALLHi Lokanth,
Refer to OSS Note 512739.
Also check these links:
http://help.sap.com/saphelp_nw04/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/58/54f9c1562d104c9465dabd816f3f24/frameset.htm
Bye
Dinesh -
Data Source Z*** is not defined in the source system
Hello All,
I am facing a well known problem extracting data from R3 to the BI side. On both sides I've got SAP ALL.
I created data source on R3 DEV side, tested it and it extracts data. I've replicated metadata on BI side and activated the data source. The problem starts once I create the info package as no data is availble in PSA.
I went to extractor checker and tried to start the extraction and I could see the message: data source Z**** not defined in the source system.
I tried to locate the data source through RSA5 and I cannot see that it is availble there.
Can you please help and advise where the problem is?Hi Neb,
It can be related to many issues, one of them can be RFC connection issue. Please check the link below :-
Datasource xxx is not defined in the source system
It might give you some of ideas. Also if possible can you tell what Datasource are you having problem with.
Regards
Sunny -
after system restore ,we are not able to activate the windows, while login to systems getting an error 0x800700B7
Cont-8096688758hi Jain,
you may need to check the transfer structures,
right click infosource and 'change', click 'comm.structure'/expand,
click 'transfer', move the 0BASE_UOM from left to right side,
or if you wont use the comm structure anymore, you can right click infosource and 'delete comm structure'
hope this helps. -
i get an error message saying "system overload, the audio engine was not able to process all the required data in time (10011)
The thing is, that error message has been appearing when playing/recording a track that was running perfectly a few minutes ago and nothing has changed!
That can mean, that your project is too ambitious for your Mac. Are you using many complicated automations on that track?
4GB memory is not much, when doing audio processing. GarageBand will need all memory it can get, or will be forced to continually swap pages to your disk, to free RAM, and that can cause this error.
When this error occurs, it is best to restart the computer. This will free your RAM. Close all other applications that are competing for memory, i.e. other multimedia applications, and Safari.
Also, make sure, that you have plenty of free disk space. Don't let the free disk space drop below 20G.
Where is your project located? On an external drive or your internal drive? If it is on an external drive, connect this drive directly, not daisy-chained, or move the project to your internal drive.
I got up to eat, came back and tried to continue but GarageBand shuts down and displays that message every time I try to run the song. I've also recently run songs with several more tracks than this one and they worked perfectly. Any tips?
Are your other projects, that worked perfectly, still working? -
i am from india...my ipad2 is not able to activate cellular data network after i updated it to ios5
Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David -
Infosource 8ZISCMS10 is not defined in the source system
Hi Gurus,
I got an issue when loading the data with in SAP BW (Info source is ODS),It threw an error message stating "Infosource 8ZISCMS10 is not defined in the source system",
Could any one of you help me in this regrad plz,
N:B: I have activated the transfer structure through RS_TRANSTRU_ACTIVATE_ALL and replicated the data sources before loading...When u activate DSO/ODS (say ZISCMS10) it creates datasource (8ZISCMS10) & Infosource (8ZISCMS10)
U can check these at ...... Modeling --> Datasources -> BI -> BI source system name. If it is missing .. reactivate DSO/ODS.
If the load is failing in QA, u should rereactivate DSO/ODS in DEV and transport that to QA.. After transport.. make sure datasource (8ZISCMS10) & Infosource (8ZISCMS10) appears in QA (Modeling --> Datasources -> BI -> BI source system name) -
Language field is not maintained in the source system
hi,
I had problem with 0ehs_actn_text data source. when i'm trying to pull data to BW it's saying language field is not maintained in the source system.
I check the datasource there is no language field in the extract structure. and No fileds are checked for slection. I found one field REFOBJ checked in the data selection tab of datasource. But the data not coming to BW side.
could anyone help.
regards
kumarhi kumar,
Check in rsa6 TXTLG field should be there and it should not be checked in HideField Tab.. then only the data will populate to BW..
So make the things properly and once again replicate the data source in Bw side.. load the data..
other wise if u dont wanto the language field in Bw side goto infoobject maintanance uncheck the "TExt Language dependent" option in masterdata/texts Tab.. save and activate it.. load the data..
i hope this will help you..
Thanks..
ravi.p -
DataSource 2LIS_11_VAHDR is not defined in the source system
I have a problem when I had activated the Data Source called 2LIS_11_VAHDR in ERP DEV and then put it in a request to be transfered to ERP Prod
Then I am using RSA3 I receive the following error
DataSource 2LIS_11_VAHDR is not defined in the source system
I tried to activate this data source several times in ERP Dev and send it to production without any successI am sure you would have done these steps, but just a double-check.
1. RSA5 - Install the data source
2. RSA6 - Activate the data source
Check in LBWE if the data source is available.
All this will be captured in a transport request(s) - you may may have a Workbench request & a Customizing request.
Also, before transporting, please check in your target system whether the datasource is available or not (RSA5).
Further to the above, do a check in Dev for the following.
After activating it in RSA6, fill the setup tables for 2LIS_11_VAHDR - i.e. thru' transaction OLI7BW.
And check the data in RSA3. -
Extraction Problem - DataSource is not defined in the source system
Hi,
I am loading transaction data into sales cubes, while loading in process chain it shows "No Data"
so when i go in rsa3 extration for checking availibilty of data.
The following message shows,
DataSource 2LIS_12_VCHDR is not defined in the source system.
In LBWE first it was shown Inactive then i make it active.
So, what is the procedure to defined this data source to the source system.
Thanks & Reagards,
SD.Hi All,
Thanks for ur reply.
But i can not found the datasource in RSA5, can anyone explain how to find the datasource in RSA5?
Datasource name : 2LIS_12_VCHDR , Cube Name : 0SD_C03
and how to activate in RSA5 ? & after activation how can migrate the same datasource in r3 side by replication?
Also the procedure to fill up the setup tables and then do the loading from r3side by thorugh infopackage...
Thanks & Regards,
SD -
When I activate source system in BW, problem with IDoc (ZSBB027) occurs.
Hi,
I made some enhancing data source in R3 and when I would replicate and activate source system in BW, some error message occurs:
"Type IDoc ZSBB027 BW is not like IDoc in source system,
Incorrect IDoc ZSBA0003 in definition source system."
Can I find which data source is bad?
Thank You very much.Hi,
there is no need to activate ur Source system unless if there is any problem in ur Source system.
When ever u do some changes in ur data source then replicate that into ur BW by going into RSA1-> Source system-> right click , Replicate data source. later u can assign that to ur info source..
Once if u do the replication then u have to activate ur Transfer rules by executing RS_TRANSTRUE_ACTIVATE_ALL.
Hope it helps-
Regards-
MM -
Could not make connection to source system
Hello Experts,
I am trying to fetch data based on selection for last month in info-package but when I try to enter selection (pull down button), I get error message - "Could not make connection to source system..."
Any idea why this message?
I have already checked connection to ECC - is fine.
Datasource is replicated.
Also if I try to run info-package without selection - I am getting yellow status, No data fetched. RSA3 shows many rows but Info-package to data (Full extraction.)
Regards,
SMSrini/Vikram,
user credential is good. sm59 connection is good. there is data in selection as RSA3 fetches rows in ecc.
when I run any info-package - I am getting yellow status? No data while rsa3 indicate data for Full update?
why so?
I am more of design person, not much into hands-on - so seeing these error for first time.
Q1) if a package is already schedule - let us sat thru data source 2lis_11_vaitm. Now I want to go back and retrieve last month data already extracted... once again. I should be able to pull this data in new infopackage using Full update - data selection option.
Q2) - rsa3 should fetch data based on set-up tables, so any infopackage based on Full update mode - should fetch data - independent of any other infopackage.
q3) we need to do delete and fill-set-up table - only if extract structure is changed? right?
regards, sm -
How to de-activate source system in BI system...?
How to de-activate source system in BI system...?
Regs,
Naren..Hi,
I feel we cant de activate the source system. Either we can aceive to do any of the following method:
1. Delete the source system
2. Remove the RFC Destination.
3. Remove the authorization to load the data.
I dont know why you are asking to deactivate the system. Coz this will not cuase any problem to you for any testing in the landscape. One more thing if you will do any of the above three activity, then Basic guys only rollback the actual situation.
So please be confident before doing this task.
Regards,
Vivek V
Maybe you are looking for
-
i want to download windows to play windowx games but when i bought my i mac it came with lion on it already so ho do i download windows without the lion disk?
-
How to create Using Formatted Text Field with multiple Sliders?
Hi i found the Java Sun tutorial at http://java.sun.com/docs/books/tutorial/uiswing/components/slider.html very useful, and it tells how to create one Formatted Text Field with a Slider - however i need to create Formatted Text Field for multiple Sli
-
Active Directory + Resource action to delete home directory
Hi all, I am trying to delete home directory from the disk physically after the user is deleted from AD. I followed the link http://docs.sun.com/app/docs/doc/820-6551/bzbuc?a=view and implemented the delete resource action as mentioned in the link. h
-
Extending recording time/length for each track?
Hello Any and Everyone! I would like to know if someone can help me out with what I am to do about extending the recording time for each track? I have found nothing as of yet that explains to me how to do it in the manual or in the application itself
-
Granularity of change rules in CDC (using Oracle streams) at columns level.
Is it possible to implement granularity of change rules in CDC (using Oracle streams) at columns level. E.g. table abc with columns a1, b1, c1 where c1 is some kind of auditing column. I want to use CDC on table abc but want to ignore changes on c1.