Not able to activate transformations

Hi All,
I have added some of the fields in the target, and applied made some one - one transformations. but Am not able to activate the transformations, It is giving error 'ERROR WHEN RESETTING TRANSFORMATION (TRANSFORMATION ID) TO THE ACTIVE VERSION.
Error arose when activating transformations, an active version already existed before the activation.
any suggestions...
Regards

Hi,
Please verify following points to resolve the same:
(1). Check whether your mapping for defined fields at source done in transformation and it's not showing any warning/error.
(2). Check the data type and analyze the kind of data has to reach to the field in transformation from your source.
(3). Check the data type length too.
(4). If everything goes fine then you can activate the transformation.
Hope it helps.
Vivek

Similar Messages

Not able to activate DTP

Hi all,
I have data loaded into PSA .Data is coming from ECC.From there I am not able to create transformations as there are no proposals.When I am activating DTP, it is giving msg as 'No authorisation available'.
But I am able to activate all other DTPs and there is no specific authorisation for this.
Pls suggest how to load into DSO.
Thanks in advance!

Hi Pallavi
My Suggestion, Delete the Old transformation. Create the new one.
If your transformation is from Infosource to ODS, than system take care of the transformation.
I think you are doing a transformation from DataSource to ODS.
You try to map the respective info objects for the particular fields In datasource level itself, than create the transformation. Now all the fields in the transformation will get mapped.
Assign points if it helps to you.
Regards
Saravanan.ar

New iPhone will not connect to iTunes Store. Not able to activate

I bought my iPhone 3 weeks ago from an AT&T store and use it everyday. It works fine. I bought one for my wife 2 days ago from the same AT&T store and it does not work. After spending 2 + hours on the phone with Apple level 1 and 2 support, the final diagnosis is a bad sim card. (Apple phone support was very good and very professional) They are in process of sending me a box to mail the iPhone in for service and I am confidant they will fix the problem. I am disappointed, however, the iPhone did not work out of the box and I now have to wait for service on a brand new iPhone.
Has anyone experienced the following problem?
When connected to iTunes, the iPhone is not able to connect to the iTunes store and I receive the following error message, "We could not complete your iTunes request. The network connection timed out. Make sure your network settings are correct and your network connection is active." I was not able to activate it.
The iPhone screen itself shows the iTunes logo and the sync connector. iTunes does not give me the ability to activate the phone nor make any changes to it. iPhone shows up in the device listing, but that is it. There are no settings in iTunes for making changes or setting up the new phone.
When I plug my iPhone into the computer, everything works fine. The new iPhone does not. I tried everything Apple recommended including: Resetting the phone and deleting / reinstalling iTunes, but nothing worked. So, here I am waiting for service on a brand new iPhone that I have paid for and am paying for monthly service, but cannot use. Kind of stinks...
Anyone have a similar problem?

2 things
one they will overnight you the box and give you a overnight box to send to them (fedex)
two call them back they will also overnight you a free iPhone loaner for the next few days if you ask

HT4061 im not able to activate my iphone 3gs after upgrading to ios6, saying server not available, what i can do

im not able to activate my iphone 3gs after upgrading to ios6, saying server not available try later. im not able to make my phone work, not able to bring serial # im in guatemala what i can do?

Activation issues are almost always the result of a device that has been hacked or jailbroken.
If this is the case, no support can be provided here.

Availability control is not able to activate in ko22

Hi frds,
my problem is i am going to creat availability control to order in 2012 i gave amount after order oerview also i gave amount but if we r not activate the budget control. because that is display mode.
in ops9 we had given activat type 1.that budget profile maintain in order type also.but i am not able to activate the availability control. can u please suggest me how to activate.
Actually my requirement is department wise budget control.when we are purchase any asset through po the amount will be reduced from that department. can u tell me suggestion this one also this is correct way r funds management implementation is the correct way.
Thanks,

Hi,
The Availability control will activate automatically when you enter budget in the order.

After system restore ,we are not able to activate the windows,while login to systems getting an error 0x800700B7

after system restore ,we are not able to activate the windows, while login to systems getting an error 0x800700B7
Cont-8096688758

hi Jain,
you may need to check the transfer structures,
right click infosource and 'change', click 'comm.structure'/expand,
click 'transfer', move the 0BASE_UOM from left to right side,
or if you wont use the comm structure anymore, you can right click infosource and 'delete comm structure'
hope this helps.

Wrong password resulted in disabling of the ipad. it says connect to itunes, i did but i am not able to activate the ipad

wrong password resulted in disabling of the ipad. it says connect to itunes, i did but i am not able to activate the ipad.
Ipad has been disabled

You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset it via your computer's iTunes and restore/resync your content to it

I download os5 and not able to activate my 3GS phone

I am not able to activate my 32GS phone after I download and installed OS5

Generally that is a sign that the iPhone had previously been jailbroken
or hacked to work with other than the original wireless provider. The update
has relocked the iPhone to the original wireless provider. You must
contact them to see if they provide unlocking and if you qualify.
If you can get that far, what does it say when you look at
Settings=>General=>About=>Carrier?

HT4623 I am not able to activate my OS. ? What shall I do ??

I am not able to activate my OS. ? What shall I do ??

We're sorry, we are unable to continue with your activation at this time.
Please try again later, or contact customer care.

Iam not able to activate my iphone it was working fine i restored it . i have entered the correct apple id and pass still its not able to activate

am not able to activate my iphone it was working fine i restored it . i have entered the correct apple id and pass still its not able to activate

i am the original owner of the iphone 5s i been using for a month the and the apple id and pass is the correct one
i just restored it and i am entering the same apple id and pass still its giving the error msg . but with the same id and pass iam able to log in to itunes ,icloud

TS4268 not able to activate my imessage and FaceTime...

not able to activate my imessage and FaceTime...it was working earlier but now it has stopped and just shows waiting for activation and then activation failed. have restored all the possible options but to no avail.
this happened after i had done the erased all setting restore after which i am facing this above mentoned issue. since this issue has come up i have used all the restore options but this issue has not yet solved
Please help

http://support.apple.com/kb/TS4268

Not able to activate Java even after clicking "allow and remember"

Hi,
After opening a website in Mozilla Firefox it shows "Activate Java(TM) Platform SE 7 U. This plugin has security vulnerabilities" and after clicking "allow and remember in red plugin icon in the address bar" the website closes automatically. Again after opening the same website the same problem exists - Not able to activate java.
After opening the same website in Google Chrome "Java(TM) Platform SE 7 U21 has crashed." - this message appears.
Please and Kindly help me solving this problem so that Im able to open the website.
Thanks & Regards,
Akansha.

You appear to have a very old version of Java installed - '''''Next Generation Java Plug-in 10.21.2 for Mozilla browsers '''''. It is shown in the Plugins submitted with your original question (click ''Question Details > More System Details'' to the right of your original question). That is Java 7u21, the current version is Java 7u45.
*All Java 7 updates (versions) prior to u45 have been blocked due to security issues - https://addons.mozilla.org/en-US/firefox/blocked/p458
*You can scroll down or use Find (Ctrl+F) to find Java versions that have been blocked on this list - https://addons.mozilla.org/en-US/firefox/blocked/
There are several methods to update Java. I recommend that you update by either 1 or 2 below:
#download, SAVE to your hard drive, close all browsers, run the updater, uncheck items that you do not want installed (if offered), then open Firefox and test.
#*Download link - http://www.oracle.com/technetwork/java/javase/downloads/index.html '''''(scroll down a bit and download the '''''JRE''''' version in the 3rd column)'''''
#*Test Java - https://www.java.com/en/download/installed.jsp
#You can also update using Windows Control Panel > Update
Your are also 2 full revisions behind on Shockwave Flash 11 (aka, Flash or Flashplayer). You System Details with you question indicate that you are using Shockwave Flash 11.7 r700 ### which contains security issues; current version is Shockwave Flash 11.9.900.152.
*Read and follow the instruction in these articles to update Flash
**https://support.mozilla.org/en-US/kb/keep-flash-up-to-date-and-troubleshoot-problems
**https://support.mozilla.org/en-US/kb/install-flash-plugin-view-videos-animations-games
You are using Firefox 25.0; Firefox 25.0.1 was released November 15, 2013. Follow the instructions to update below and read the release notes to see what changed.
*Update Firefox - https://support.mozilla.org/en-US/kb/update-firefox-latest-version
*Release notes Firefox 25.0.1 - https://www.mozilla.org/en-US/firefox/25.0.1/releasenotes/

I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard

I have unlocked my iphone and when tried to upgrade it, i got an error, so i restored it.But i was not able to activate my iphone 3gs now...it is showing a message like ' sim card not found'..please help me with this regard

Try popping out the SIM card and turn off the phone.
Pop in the SIM card once again and turn on the phone, make sure that the SIM card is placed and seated perfectly in the tray!
Tell me how did you unlock your phone!?

HT5163 i am not able to activate my Iphone- I have a SIM card but it keeps telling me there is no SIM card. My phone has been unlocked by Apple but keeps.

i am not able to activate my Iphone- I have a SIM card but it keeps telling me there is no SIM card. My phone has been unlocked by Apple but keeps.

i got in Manhattan from AT&T-
This error came after I updated the software since Apple confirmed and I have spoken with them and they confirmed it is officially iunlocked since I have full filled their terms of the agreement.
This phone was working earlier since i had jail broken it.
I have been using it with jail break for about 2 years now

I restored my iphone5 after forgetting the passcode unfortunately i am not able to activate the phone because it can't recognize my sim card

I restored my iphone5 after forgetting the passcode unfortunately i am not able to activate the phone because it can't recognize my sim card

Has the phone been officially unlocked by the provider before? Only the provider can unlock the phone, if the phone has been jailbroken to unlock it, restoring will lock it again.
iPhone: About unlocking

Not able to activate transformations

Similar Messages

Maybe you are looking for