Not able to assign map in Syndicator

Hi all,
I am using Syndication Server of MDM 5.5 SP05 Patch 2 to create an export from my MDM repository into a flat file.
My plan is to define a map and assign it to a repository port for scheduled output.
But I am confused on how to create the map and assign it to the port. Did anyone do that before?
Could you give a step-by-step guide describing a simple case?
Here you can see what I did (severel times) until now:
1. created a system for the repository in the MDM Console (named "System 1")
2. created a port for the repository in the MDM Console (named "Port 1")
   Type of port is "Outbound", System is "System 1". Map is empty.
3. in the Syndicator created a map and saw the result on "Destination preview" tab
   On the Map Properties Map the Output Remote System is set to "System 1"
4. Saved the map via "File > SaveAs" and named it "Map 1"
5. tried "File > Destination Properties" to set
   Type=Port
   Remote System=System 1
   Port=Port 1
   Error message is "Could not load selected map"
6. tried to save map as "Map 2" and repeated but same error message
7. Back in the MDM Console at the Port no map is selectable as it seems no map is assigned to the port.
I know the documentation "MDM Syndicator Reference Guide 5.5 SP5 July 26, 2007" from SMP and studied it closely.
In the documentation it says:
"To select a remote system, choose from the Remote System drop-down
list in the New Map dialog, shown in Figure 94."
But I can not find the "New Map" dialog. There is no "New" menu item.
It also says:
"The File > Save As command saves to a new map. Use the
File > Save command to save to the current map if it has already been
opened or saved."
I have not "Save" command in my File menu. Just "Save As"
Anyone a hint?
Thanks and best regards
Ingo

Hi,
now i am working on 5.5.41.58, i tried your scenario, i could not insert a map in  the port details tab. That may be a bug.
normally what we do is,
1. in the syndicator you create a map
go to file --> save as --> map 1.    map saved.
2. go to file --> open the map --> export --> save to local system.
3. in the console for that particular repository;
Admin --> Portstable --> click on already created outbound port, in the port details we have to assign the map,
but in this it is not allowing,
hope this may help you
Regards,
srinivas

Similar Messages

  • Service desk---not able to assign employee and user to a position

    As i click on employee or user one popup comes and doesn't open. Therefore i am not able to assign a employee or user to a position.
    Friends please help me out.
    regards
    Rajneesh

    Hi Rajneesh,
    yes, please use the IE and add the pop-up-page to the compatibility mode under "EXTRAS --> Settings for compotibility mode --> ADD".
    Cheers,
    Robert

  • Not able to assign the chart of depreciation

    Hi i am not able to assign the chart of depreciation, can any one provide me the detail path for the below issue.
    Inconsistency between FI company code BHEL and chart of deprec. BHEL
    Message no. AC481
    Diagnosis
    You tried to assign chart of depreciation BHEL to company code BHEL. According to its Customizing definition, this company code manages parallel currencies.
    The chart of depreciation does not contain a corresponding depreciation area for each of the currency types that are defined in the company code.
    System Response
    This assignment is not possible.
    Procedure
    1. Check the currency types of the company code.
    2. Specify a corresponding depreciation area for each currency type.

    Dear,
    Rajesh.
    Good Morning !
    If your company code is having more than one currency than you will have to maintain that many depreciation areas.
    OR
    Before assigning COD to Company Code, delete the parallel currency maintained in multiple currencies in global settings.
    below is the path:-
    SPRO>Financial Accounting>Financial Accounting Global Settings>Company Code>Multiple Currencies-->Define Additional Local Currencies
    After deleting you can assign the COD to Company Code.
    After assigning you have go back again in define additional local currencies screen (mentioned above) and maintain the parallel currency which you have deleted.
    You have first to Assign Input Tax Indicator for Non-Taxable Acquisitions in transaction code OBCL.
    Check your parallel currencies in T.code OABT.
    I hope this will help you to solve your issue. If you have any doubts feel free to share.
    Regards,
    Pankaj A Bhalerao.

  • Not able to assign ringtone to particular contact

    Hello,
    I just updated my SE Live with walkman (WT19i) with Android ICS 4. After updation its working fine.
    But, I am not able to assign ringtone to any contact. It always shows as default ring tone.
    Kindly do needful.
    Thanks,
    Zinith Patel

    Use SUS instead
    Update Service (SUS)
    http://www.sonymobile.com/gb/tools/update-service/
    http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    Don't forget to mark the Correct Answers & Helpful Answers
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Not  able  to Assign Organizational Units to the Sites

    Hi all,
    while  configuring  intercompany  billing  I  am  not  able  to  assign  the  Organizational Units to the Sites.
    I  am  in  retail  system  and  maybe  here  I  have  to  do  something  else  before  seting  up  the  intercompany?
    Thanks in advance
    L

    Hi,
    Go through the Building block and their prerequisites
    http://help.sap.com/bp_bblibrary/600/html/R01_EN_DE.htm
    http://help.sap.com/bp_bblibrary/600/html/R41_EN_DE.htm
    Thanks
    Chidambaram

  • Not able to assign Project to the Urgent Change Request with Developer Id with the existing Authorizations. With SAP_ALL authorization, everything works fine.

    The Urgent Change request is in created status and I am not able to assign project to it. Also I am not able to change the status of the change request to In developement with developer's Id. Everything works fine if i assign SAP_ALL authorization to the developer.
    Below are the roles assigned to Developer ID -
    SAP_CM_SMAN_DEVELOPER
    SAP_SM_CRM_UIU_FRAMEWORK
    SAP_SM_CRM_UIU_SOLMANPRO
    SAP_SM_CRM_UIU_SOLMANPRO_CHARM
    SAP_SMWORK_BASIC_CHANGE_MAN
    SAP_SMWORK_CHANGE_MAN
    SAP_SOCM_DEVELOPER
    Z_S001
    ZSAP_SOCM_DEVELOPER
    Issue screen -
    SU53 for Developer-
    Please suggest which roles/Authorization should be assign to Developer Id.
    Thanks
    Kavita

    Hi Kavita,
    Copy these roles to Z-roles
    SAP_CM_SMAN_DEVELOPER
    SAP_SM_CRM_UIU_FRAMEWORK
    SAP_SM_CRM_UIU_SOLMANPRO
    SAP_SM_CRM_UIU_SOLMANPRO_CHARM
    SAP_SMWORK_BASIC_CHANGE_MAN
    SAP_SMWORK_CHANGE_MAN
    SAP_SOCM_DEVELOPER
    Assign this to user.
    Put a stace using ST01.
    Find that object and modify/add in your custom role.
    Regards,
    Divyanshu

  • Not able to assign process server to file events.

    Hi,
    our requirement is we want a file event to be raised when ever a file is uploaded in BW.
    when we tried to configured a file event we are not able to assign a process server. when we click on process server our bw process server is not popped up.
    i am not clear what setting needs to be maintained in dataroot directory.
    Process Server>>Parametes>>Data root directory
    or
    do we need to set up any platform agent on BW System
    please advise.

    Hi Anthon ,
    1)Do we require seperate license for Platform agents and once after downloading  the platform agent can we install from CPS side  by submitting job definition or this is a BASIS job to install the platform agent on the system where we want the files to be detected.
    2)is there any setting needs to be done on CPS side after we intall Platform Agents in the bw system.
    Regards
    Rajesh Dhaval

  • NOT ABLE TO ASSIGN MO:OPERATING UNIT PROFILE VAL TO A RESPONSIBILITY

    I am trying to create new orgnization and assigning parameters in AP. I am not able to assign profile values. Could you pl. clarify foll points..
    To generate seeded data, it is displaying(in the concurrent program) existing operating unit in the LOV not the new Operating unit that I created.
    When i try to associate new Responsibilty to MO operating unit level, it is displaying existing organization not newly created org.
    NOt able to assign profile values to business group(field is protected against update) as I created new ORG not with "setup Business Group".
    When i click legal entity parameter in operating unit, it is displaying
    "NO ENTRIES FOUND FOR LIST OF VALUES"
    I would appreciate your early response
    Thanks
    Ven.
    [email protected]

    Hi Nagamohan
    Your query returned me the seeded ones:
    GL_AUTO_ALLOC_WF_PKG
    PA_AUTOALLOC_WF_PKG
    We have a value at the site level, and at the 1st OM super user responsibility having the issue has no default value, hence defaulting the value from the site level.
    The other OM super user responsibility has a value. And this value is defaulted to the 1st OM responsibility profile from time to time.
    The other responsibility OM Administrator have no problem. This value changes when the users logged into this OM super user responsibilities (both OU), the value switches back and forth to 2nd OU value and then the site level value fills the value for the 1st OM super user responsibility(even though we didn't have any default value before).
    If the users logged into 1st OM Administrator responsibility to process the orders, then no problem, the value stays to the correct OU).
    We have been relying on the defaulting value(coming from the site level) for all this time and have had no problems until now. It was always blank for the 1st OM super user. but, when the problem started then only it's having issue. I manually deleted the value (wrong value from the other OU) at the 1st OM Super user level, then next time the user logs into the 1st OM Super user resp, then it's having the correct value(same as site), and keep on updating the value with this correct value. But, all of a sudden it changes to the wrong OU value, don't know what object is causing this...
    Thanks
    Radhika

  • Not able save the mapping after writing the 4th UDF (in PI 7.1)

    Hi All,
    After writing the 4th UDF i am not able to save the mapping in PI 7.1, i am getting the following error "the length 3 of the array 'sortedFunctionKeys' is not equal to the number 4 of functions".
    Please let me know how to overcome this
    Regards
    Vinay P

    can you check the syntax of the UDF?
    seems there is some issue in it.
    Also sortedFunctionKeys is this part of the UDF? then make sure the logic is correct behind the code.

  • Problem with OC4J:: not able to deploy map

    hello
    i have downloaded the OC4J stand alone.
    Then i have run the oc4j START Script- it is running.
    then went to browser and runhttp://localhost:8888/mapviewer to access its functions.
    oracle application server MAP VIEWER starts and home page opens..
    but I AM NOT ABLE TO ACTUALLY DEPLOY THE MAP??
    i have also installed the demo database given in mvdemo.zip.
    But actally i dont know how to link it to map viewer??
    PLEASE HELP!!!!

    http://localhost:8888/mapviewer/fsmc/tutorial/setup.html
    contains a set of instructions to set up the mapviewer metadata and data sources once you've loaded the mvdemo.dmp data into a database.
    Have you tried that?

  • Not able to deploy mapping from one schema location to another

    When I am trying to deploy a mapping from a source schema to another target schema, i am not able to do so even though the deployment of the connector is also successfull.
    Can somebody help in this regards.
    Thanks.

    Hi,
    did you grant the select permission of the objects from your source location to the target user? You must do this direct on the database because you cannot do this with the owb.
    Regards,
    Detlef

  • NOT able to assign business system in ID

    Dear all ,
      i am not able to see my business system in the list when am trying to assign
      business system.
      i also tried refreshing the SLD cache but not working.
      if u can help.
    Regards,
    Tarang Shah

    Hi Tarang,
    Just check if you have the right permissions to do that.
    It can also happend that the businees system is not added in the SLD or SLD has to be refreshed.
    regards,
    younus

  • Not able to assign my purchased item in avg costing organisation

    Dear Sir
    Our company is an Average Costing Organisation. When I try to assign an item (After applying Purchased Item Template) to my organisation, I am not able to save it. But If I apply Finished Good and Subassembly Templates, I am able to assign the item to my organisation. Please clarify
    Merlin Rajesh

    Declare Average rate type in average costing org meters and assign purchased item
    M.U.Shankar

  • KEA0 - not able to assign characteristic to Op. Concern

    Hi,
    i'm trying to assign a user-defined characteristic to a operating concern in KEA0. This characteristic is already active in KEA5, i'm entering KEA0, clicking on "Modify", then I click on "Data Strucutre" - button "active", the list of characteristics appear. But i'm not able to see the right column with the non-assigned characteristics, so I cannot transfer it to the left side.
    Can you help me?
    Regards
    Mayumi

    Hi
    With in KEA0 - Click on DISPLAY /CHANGE Data Structure button
    In next screen, click on CHANGE VIEW button.. You will see the chars populated on the right side...
    You may need to unlock the chars before transf from Right to left side (Extras > Chars > Unlock)
    After you transfer - SAVE and Click on ACTIVATE button (Candle icon)
    Now press back button.. System would ask you to Regenerate the Op concern....
    Later on create a transport request from KE3I and transport it across
    br, Ajay M

  • Not able to assign Composite Role to Position

    Hello All,
               I am facing following problems.
    1) The user is Not able to see Create Report Links, when i checked the Composite Role in PFCG i found that the in USER Tab Organizational Tab was yellow, i did Indirect Reconcillatin in Organizational Tab and then it went GREEN, then i did User Comparision.
    I got this Message
    "You do not need to perform Prfile Comparision for role " Role Name".
    and the Position was removed.
    2) Now i am Trying to assing the Role to Position, i am not even able to assign it and the User id is not coming under User id  list.
    Please suggest.
    Thanks,
    CB

    @Point#1: It could be that user master is already compared for your composite role and no further comparison is required. To double check you might just run the comparison again via tcode PFUD or report RHAUTUPD_NEW
    @Point#2: For indirect assigment to position make sure organization management is active in your system (the switch HR_ORG_ACTIVE is set in the table PRGN_CUST to YES).
    Thanks
    Sandipan

Maybe you are looking for