Not able to assign old dependancy net to new one.

I created a new Dependancy Net :
Problem is that it is not possible to attach an existing OD to the new net,
is there any solution for this.

Please check what is the dependancy type you are using.
following are the imp points which we need to conside before creating the dependancy.
1.Preconditions are allowed for characteristics and characteristic values.
2.Selection conditions are allowed for characteristics, BOM items, operations, sub-operations, sequences of operations, and production resources/tools.
3.Actions are allowed for characteristics, characteristic values, BOM items, operations, and configuration profiles.
4Constraints can only be linked to a configuration profile via dependency nets.
regards
shiv

Similar Messages

  • I am not able to access old music after a new hard drive install.  Wants an old password and I'd

    I am unable to sync music to iPad iPhone etc. from 27" iMac with anew hard drive install.  Wants an old really old apple I'd and PW that hasn't been in use. What to do?

    Hello DeedeeB6075,
    Thank you for posting in the Apple Support Communities.  It sounds like you have some music that you purchased with an older Apple ID that you don't have access to because your new hard drive needs to be authorized. If you know what the Apple ID is, you can go to https://iforgot.apple.com/ to reset your password. 
    If you cannot remember the Apple ID, you can follow the steps in this article to find your Apple IDs, and then go to https://iforgot.apple.com/ to reset your password.
    Apple ID: Finding your Apple ID
    http://support.apple.com/kb/HT5625
    I hope this helps get you back on track!
    Best,
    Sheila M.

  • Service desk---not able to assign employee and user to a position

    As i click on employee or user one popup comes and doesn't open. Therefore i am not able to assign a employee or user to a position.
    Friends please help me out.
    regards
    Rajneesh

    Hi Rajneesh,
    yes, please use the IE and add the pop-up-page to the compatibility mode under "EXTRAS --> Settings for compotibility mode --> ADD".
    Cheers,
    Robert

  • HT1329 I was able to transfer my music from my old PC to my new one and connect to the newest version of ITunes but my playlists do not appear on my new PC when I open ITunes.  Any suggestions?

    I was able to transfer my music from my old PC to my new one and connect to the newest version of ITunes but my playlists from my old PC do not appear on my new PC when I open ITunes.  Any suggestions?

    Copy everything from your old computer, or your backup copy of your old computer, to your new one.

  • Not able to assign the chart of depreciation

    Hi i am not able to assign the chart of depreciation, can any one provide me the detail path for the below issue.
    Inconsistency between FI company code BHEL and chart of deprec. BHEL
    Message no. AC481
    Diagnosis
    You tried to assign chart of depreciation BHEL to company code BHEL. According to its Customizing definition, this company code manages parallel currencies.
    The chart of depreciation does not contain a corresponding depreciation area for each of the currency types that are defined in the company code.
    System Response
    This assignment is not possible.
    Procedure
    1. Check the currency types of the company code.
    2. Specify a corresponding depreciation area for each currency type.

    Dear,
    Rajesh.
    Good Morning !
    If your company code is having more than one currency than you will have to maintain that many depreciation areas.
    OR
    Before assigning COD to Company Code, delete the parallel currency maintained in multiple currencies in global settings.
    below is the path:-
    SPRO>Financial Accounting>Financial Accounting Global Settings>Company Code>Multiple Currencies-->Define Additional Local Currencies
    After deleting you can assign the COD to Company Code.
    After assigning you have go back again in define additional local currencies screen (mentioned above) and maintain the parallel currency which you have deleted.
    You have first to Assign Input Tax Indicator for Non-Taxable Acquisitions in transaction code OBCL.
    Check your parallel currencies in T.code OABT.
    I hope this will help you to solve your issue. If you have any doubts feel free to share.
    Regards,
    Pankaj A Bhalerao.

  • Not able to assign ringtone to particular contact

    Hello,
    I just updated my SE Live with walkman (WT19i) with Android ICS 4. After updation its working fine.
    But, I am not able to assign ringtone to any contact. It always shows as default ring tone.
    Kindly do needful.
    Thanks,
    Zinith Patel

    Use SUS instead
    Update Service (SUS)
    http://www.sonymobile.com/gb/tools/update-service/
    http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
    Alternatives on How to backup Xperias
    http://talk.sonymobile.com/thread/36355
    Don't forget to mark the Correct Answers & Helpful Answers
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Not  able  to Assign Organizational Units to the Sites

    Hi all,
    while  configuring  intercompany  billing  I  am  not  able  to  assign  the  Organizational Units to the Sites.
    I  am  in  retail  system  and  maybe  here  I  have  to  do  something  else  before  seting  up  the  intercompany?
    Thanks in advance
    L

    Hi,
    Go through the Building block and their prerequisites
    http://help.sap.com/bp_bblibrary/600/html/R01_EN_DE.htm
    http://help.sap.com/bp_bblibrary/600/html/R41_EN_DE.htm
    Thanks
    Chidambaram

  • Not able to assign Project to the Urgent Change Request with Developer Id with the existing Authorizations. With SAP_ALL authorization, everything works fine.

    The Urgent Change request is in created status and I am not able to assign project to it. Also I am not able to change the status of the change request to In developement with developer's Id. Everything works fine if i assign SAP_ALL authorization to the developer.
    Below are the roles assigned to Developer ID -
    SAP_CM_SMAN_DEVELOPER
    SAP_SM_CRM_UIU_FRAMEWORK
    SAP_SM_CRM_UIU_SOLMANPRO
    SAP_SM_CRM_UIU_SOLMANPRO_CHARM
    SAP_SMWORK_BASIC_CHANGE_MAN
    SAP_SMWORK_CHANGE_MAN
    SAP_SOCM_DEVELOPER
    Z_S001
    ZSAP_SOCM_DEVELOPER
    Issue screen -
    SU53 for Developer-
    Please suggest which roles/Authorization should be assign to Developer Id.
    Thanks
    Kavita

    Hi Kavita,
    Copy these roles to Z-roles
    SAP_CM_SMAN_DEVELOPER
    SAP_SM_CRM_UIU_FRAMEWORK
    SAP_SM_CRM_UIU_SOLMANPRO
    SAP_SM_CRM_UIU_SOLMANPRO_CHARM
    SAP_SMWORK_BASIC_CHANGE_MAN
    SAP_SMWORK_CHANGE_MAN
    SAP_SOCM_DEVELOPER
    Assign this to user.
    Put a stace using ST01.
    Find that object and modify/add in your custom role.
    Regards,
    Divyanshu

  • Not able to assign process server to file events.

    Hi,
    our requirement is we want a file event to be raised when ever a file is uploaded in BW.
    when we tried to configured a file event we are not able to assign a process server. when we click on process server our bw process server is not popped up.
    i am not clear what setting needs to be maintained in dataroot directory.
    Process Server>>Parametes>>Data root directory
    or
    do we need to set up any platform agent on BW System
    please advise.

    Hi Anthon ,
    1)Do we require seperate license for Platform agents and once after downloading  the platform agent can we install from CPS side  by submitting job definition or this is a BASIS job to install the platform agent on the system where we want the files to be detected.
    2)is there any setting needs to be done on CPS side after we intall Platform Agents in the bw system.
    Regards
    Rajesh Dhaval

  • NOT ABLE TO ASSIGN MO:OPERATING UNIT PROFILE VAL TO A RESPONSIBILITY

    I am trying to create new orgnization and assigning parameters in AP. I am not able to assign profile values. Could you pl. clarify foll points..
    To generate seeded data, it is displaying(in the concurrent program) existing operating unit in the LOV not the new Operating unit that I created.
    When i try to associate new Responsibilty to MO operating unit level, it is displaying existing organization not newly created org.
    NOt able to assign profile values to business group(field is protected against update) as I created new ORG not with "setup Business Group".
    When i click legal entity parameter in operating unit, it is displaying
    "NO ENTRIES FOUND FOR LIST OF VALUES"
    I would appreciate your early response
    Thanks
    Ven.
    [email protected]

    Hi Nagamohan
    Your query returned me the seeded ones:
    GL_AUTO_ALLOC_WF_PKG
    PA_AUTOALLOC_WF_PKG
    We have a value at the site level, and at the 1st OM super user responsibility having the issue has no default value, hence defaulting the value from the site level.
    The other OM super user responsibility has a value. And this value is defaulted to the 1st OM responsibility profile from time to time.
    The other responsibility OM Administrator have no problem. This value changes when the users logged into this OM super user responsibilities (both OU), the value switches back and forth to 2nd OU value and then the site level value fills the value for the 1st OM super user responsibility(even though we didn't have any default value before).
    If the users logged into 1st OM Administrator responsibility to process the orders, then no problem, the value stays to the correct OU).
    We have been relying on the defaulting value(coming from the site level) for all this time and have had no problems until now. It was always blank for the 1st OM super user. but, when the problem started then only it's having issue. I manually deleted the value (wrong value from the other OU) at the 1st OM Super user level, then next time the user logs into the 1st OM Super user resp, then it's having the correct value(same as site), and keep on updating the value with this correct value. But, all of a sudden it changes to the wrong OU value, don't know what object is causing this...
    Thanks
    Radhika

  • I have forgotten my password for icloud, have an invalid email address and do not know my security answers. How can I transfer all my data from my old iphone to the new one?

    I have forgotten my password for icloud, have an invalid email address and do not know my security answers. How can I transfer all my data from my old iphone to the new one?

    In this case you won't be able to do that?

  • I have a new pc. If I copy the Itunes folder from my old pc onto my new one in the music folder will I be able to sync just as if it were the old one? This is from a Widows Vista machine to Windows 7.

    If I copy the Itunes folder from my old pc onto my new one in the music folder will I be able to sync just as if it were the old one? This is from a Widows Vista machine to Windows 7.

    I suspect design rather than a bug, it's too useful. The behaviour seems to have been consistent for quite a long time on both Windows and Mac machines...
    Here are the typical layouts for the iTunes folders:
    In the layout above right, with the media folder (everything in the red box) inside the library folder, the library will be portable. A portable library can be moved from one path to another, or even between Windows & Mac computers, without breaking the links between the library and the media, and being self-contained is much easier to backup (You do backup, don't you?). Anything that isn't stored inside the media folder must stay put or be restored to precisely the same path on a new machine or iTunes won't know where to find it. Within the media folder the relative paths from the library to the media remain unchanged and iTunes can cope even when the absolute paths are updated.
    Should your library not be in the usual layout I've written some general posts on how to make a split library portable or I can give specific instructions on request.
    tt2

  • My hard drive crashed. I slaved the old drive, but did not make a backup of my bookmarks. how can I transfer my bookmarks from the old drive to the new one?

    My original hard drive was replaced due tom multiple errors. Before it crashed completely, I installed a new hard drive and slaved the old one to allow me to access the data and transfer it to the new one. I did not backup the bookmarks. How can I pull the old bookmarks from the old drive to the new installation drive???

    Since you said you were able to transfer the data from your old drive to the new one, you probably still have the old Firefox Profile. Please read this article to see if it helps:
    http://support.mozilla.com/en-US/kb/Profiles

  • Hello, I have transferred my Acrobat XI Pro from old MAC to the new one. After the transfer can not open any PDF file. Any idea how to solve this?

    Hello, I have transferred my Acrobat XI Pro from old MAC to the new one. After the transfer can not open any PDF file. Any idea how to solve this?

    Hey ilyaz20360341,
    Could you please specify how exactly did you transfer Acrobat from one MAC to other.
    You might need to deactivate the software from your old machine and then activate it on the new one with the same serial number (for Acrobat license) or Adobe credentials (for Acrobat subscription).
    If you have done the same way, then let me know if you are able to open Acrobat itself.
    Do you get any specific error message while opening a PDF?
    Hope to get your response.
    Regards,
    Anubha

  • How do i transfer songs from my old ipod to my new one when not all the songs are on my itunes account?

    I got a new ipod touch. my old ipod is a nano.  i have an itunes account, but it is very old and i do not remember my itunes account information. most of the songs from my old ipod are not on my itunes account. how can i get all the songs from my old ipod onto my new one?

    Transfer non-iTunes purcased music from the iPod to the computer by using a hird-party program like one of those discused here:
    Copy music from Ipod to new computer...: Apple Support Communities
    Transfer iTunes purchased by:
    iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
    You do have to know the accout(s) ID and password.
    The follwing includes how to reset your password.
    Frequently Asked Questions About Apple ID

Maybe you are looking for