Not able to browse to the CRS Administration URL and "Page Cannot be Displayed error appears"

I have installed IPCCX 7.0 in VMware
I have finished the installation without any error.But after installation when I tried to open the Admin page from
Start > Programs > Cisco Unified CCX Administrator > Application Administration
Getting error message "Page Cannot be displayed".
From troubleShooting Guide found that these services should be running
Check that the CRSJavaAdmin.exe is running (in Windows Task Manager).
World Wide Web Publishing service.IIS Admin service
Can anyone tell me How to run CRSJavaAdmin.exe ??
Thanks in advance.
Reena

Hi RAdha,
CRSJavaAdmin.exe is controlled by UCCX node manage servicer, Can you go to the serviceability tool (start - programs - Cisco unified CCX administrator - Cisco Unified CCX serviceability ) and in process ACtivation tab make sure all the services aren enabled specialy "cisco unified CCX administrator" if not enable it and restart the node manager service from the services menu
Hope this helps
Thank you
Anuj

Similar Messages

My mac's keyboard is not working with my mac.the green light blinks and i cannot get onto my mac. everything on the support questions does not help because i cant go on the mac and i cant sign in

my mac's keyboard is not working with my mac.the green light blinks and i cannot get onto my mac. everything on the support questions does not help because i cant go on the mac and i cant sign in

If you can't sign in, then you can't troubleshoot and/or pair the keyboard until after that........ so, for that, you will need to borrow someone's USB wired keyboard in order to get signed in and to the Keyboard Bluetooth Preferences.

The page cannot be displayed error in UWL

Hi
I am getting the "The page cannot be displayed error when I try to click the Refresh button or MSS link in the UWL.
Any idea...
Regards
Ali

Hello,
Can you be more clear? Are you able to see UWL list itself. If you are not able to see the UWL itself, then please make the needed config is done as in the link
http://help.sap.com/saphelp_erp2005vp/helpdata/en/39/a1bb5c4c0d4ab4a417e87ef35f1efa/frameset.htm
Regards
<i><b>Raja Sekhar</b></i>

The page cannot be displayed Error showing for workspace

Hi All
The page cannot be displayed Error showing for workspace.
http://localhost:19000/workspace/index.jsp
Other web applications working fine.... Shared Services, FDM webclient
1. I have restarted Hyperion Workspace - Agent Service and IIS Admin service Still my problem didn't get resolved.
2.Below web services extensions provided *"Allow"* permission in Internet information services(IIS)Manager
Active Server Pages
ASP.NET v1.1.4322
ASP.NET v2.0.50727
Internet Data Connector
Server Side Includes
WebDAV
Application Pool->DefaultApp Status showing Running
Web sites->*1.Default web site 2.Administration* Status showing Running
Regards
Smilee

Correct, I just mistyped it in my thread. I just tried "http://epm.southbay.local:19000/workspace/"
When I click Start Reporting and Analysis core serivces a command prompt window opens with the name "server" on the window, but the command prompt window itself is empty.

"The Page Cannot Be Displayed" error when clicking the Remote Agent

Hi everyone! We have installed ACS SE 4.0 and we have added a remote agent running on Windows Server 2003. Recently, we are encountering "The page cannot be displayed" error when we click the RA under a network device group. This is resolved by rebooting the ACS SE appliance and accessing the ACS SE web console again but after few hours, problem reoccurs. Clicking the links on the ACS SE web console is okay at first but after clicking the RA, every link shows the error "The page cannot be displayed." Hope you could help us on this problem. Anyone's support is very much appreciated.
Thanks!

Hi JG,
Thank you so much for your response. Does Cisco have a documentation that states that this is a known issue with 4.0, such as release notes, for we might need this for the proposal upgrade?
Again, thanks a lot!

Not able to download all the rows to excel sheet from alv grid display

Hi experts,
I am not able to download all the rows which are displayed in alv grid display for some material numbers.
for some materials i am able to download, i used two ways to download 1) from icon(local file) on grid 2) menu list->export.
i checked in debugging till selecting the spread sheet pop up window, i am able to see all the data in internal table.
Can you suggest me what will be the problem....
thanks in advance,

hi sandeep,
sorry for didnt specify clearly.
note: EX: "asaasdada in this sentence i said " this symbol is special character not the text.
building final internal table code
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
    EXPORTING
      capid                 = p_capid
      datuv                 = sy-datum
      ehndl                 = '1'
      mktls                 = 'X'
      mehrs                 = 'X'
      mmory                 = '1'
      mtnrv                 = p_matnr
      stlal                 = '1'
      stpst                 = 0
      svwvo                 = 'X'
      werks                 = p_werks
      vrsvo                 = 'X'
    TABLES
      stb                   = i_stb
    EXCEPTIONS
      alt_not_found         = 1
      call_invalid          = 2
      material_not_found    = 3
      missing_authorization = 4
      no_bom_found          = 5
      no_plant_data         = 6
      no_suitable_bom_found = 7
      conversion_error      = 8
      OTHERS                = 9.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_stb1[] = i_stb[].
IF NOT i_stb1[] IS INITIAL.
    SORT i_stb1 BY idnrk.
    DELETE ADJACENT DUPLICATES FROM i_stb1 COMPARING idnrk.
    SELECT bmatn ematn FROM ampl INTO TABLE i_ampl
      FOR ALL ENTRIES IN i_stb1
      WHERE bmatn = i_stb1-idnrk AND
            datuv LE sy-datum AND
            datub GE sy-datum.
    SELECT
    matnr
    bwkey
    verpr
    stprs
    bwprh
    FROM mbew
    INTO TABLE i_mbew
    FOR ALL ENTRIES IN i_stb1
    WHERE
        matnr EQ i_stb1-idnrk AND
        bwkey EQ i_stb1-werks.
    IF NOT i_stb1[] IS INITIAL.
      SELECT matnr werks beskz
             dzeit webaz plifz
             ekgrp
      INTO TABLE i_marc
      FROM marc
      FOR ALL ENTRIES IN i_stb1
      WHERE matnr = i_stb1-idnrk
      AND werks = i_stb1-werks.
      SORT i_marc BY matnr werks.
    ENDIF.
    CLEAR i_ekpo.
    CLEAR i_vend.
    IF NOT i_stb1[] IS INITIAL.
      SELECT ebeln ebelp matnr werks loekz aedat
             netpr peinh
      INTO TABLE i_ekpo
      FROM ekpo
            FOR ALL ENTRIES IN i_stb1
            WHERE matnr = i_stb1-idnrk
            AND werks = i_stb1-werks.
      SORT i_ekpo BY matnr ASCENDING
                     aedat DESCENDING
                     ebeln DESCENDING
                     ebelp DESCENDING.
      IF NOT i_ekpo IS INITIAL.
        SELECT k~ebeln k~lifnr l~name1
        INTO TABLE i_vend
        FROM ekko AS k INNER JOIN lfa1 AS l
        ON k~lifnr EQ l~lifnr
        FOR ALL ENTRIES IN i_ekpo
        WHERE ebeln = i_ekpo-ebeln.
        SORT i_vend BY ebeln.
      ENDIF.
    ENDIF.
ENDIF.
i_ampl1[] = i_ampl[].
IF NOT i_ampl1[] IS INITIAL.
    SORT i_ampl1 BY ematn.
    DELETE ADJACENT DUPLICATES FROM i_ampl1 COMPARING ematn.
    SELECT matnr mfrpn mfrnr FROM mara INTO TABLE i_mara
      FOR ALL ENTRIES IN i_ampl1
       WHERE matnr = i_ampl1-ematn.
ENDIF.
SORT i_ampl BY bmatn.
IF NOT i_stb[] IS INITIAL.
    SELECT stlty stlnr stlkn stpoz idnrk potx1 potx2
    INTO TABLE i_stpo
    FROM stpo
    FOR ALL ENTRIES IN i_stb
    WHERE stlty = i_stb-stlty
      AND stlnr = i_stb-stlnr
      AND stlkn = i_stb-stlkn
      AND stpoz = i_stb-stpoz
      AND idnrk = i_stb-idnrk.
    SORT i_stpo BY stlty stlnr stlkn stpoz idnrk.
ENDIF.
LOOP AT i_stb INTO wa_stb.
    READ TABLE i_marc INTO wa_marc
    WITH KEY     matnr = wa_stb-idnrk
                 werks = wa_stb-werks
                 BINARY SEARCH.
    IF sy-subrc = 0.
      wa_outtab-beskz = wa_marc-beskz.
      wa_outtab-dzeit = wa_marc-dzeit.
      wa_outtab-webaz = wa_marc-webaz.
      wa_outtab-plifz = wa_marc-plifz.
      wa_outtab-ekgrp = wa_marc-ekgrp.
    ENDIF.
    READ TABLE i_ekpo INTO wa_ekpo
        WITH KEY matnr = wa_stb-idnrk.
    IF sy-subrc = 0.
      wa_outtab-netpr = wa_ekpo-netpr.
      wa_outtab-peinh = wa_ekpo-peinh.
      READ TABLE i_vend INTO wa_vend
      WITH KEY ebeln = wa_ekpo-ebeln
               BINARY SEARCH.
      IF sy-subrc = 0.
        wa_outtab-lifnr = wa_vend-lifnr.
        wa_outtab-name_sup = wa_vend-name1.
      ENDIF.
    ENDIF.
    READ TABLE i_stpo INTO wa_stpo
    WITH KEY stlty = wa_stb-stlty
             stlnr = wa_stb-stlnr
             stlkn = wa_stb-stlkn
             stpoz = wa_stb-stpoz
             idnrk = wa_stb-idnrk
             BINARY SEARCH.
    IF sy-subrc = 0.
      wa_outtab-potx1 = wa_stpo-potx1.
      wa_outtab-potx2 = wa_stpo-potx2.
    ENDIF.
    READ TABLE i_mbew INTO wa_mbew
    WITH KEY
    matnr = wa_stb-idnrk
    bwkey = wa_stb-werks.
    IF sy-subrc IS INITIAL.
      MOVE:
      wa_mbew-verpr TO wa_outtab-verpr,
      wa_mbew-stprs TO wa_outtab-stprs,
      wa_mbew-bwprh TO wa_outtab-bwprh.
    ENDIF.
    wa_outtab-matnr = p_matnr.
    wa_outtab-posnr = wa_stb-posnr.
    wa_outtab-stufe = wa_stb-stufe.
    wa_outtab-idnrk = wa_stb-idnrk.
    wa_outtab-ojtxb = wa_stb-ojtxp.
    wa_outtab-menge = wa_stb-menge.
    wa_outtab-meins = wa_stb-meins.
    MOVE: wa_stb-zzitem_draw_no TO wa_outtab-zzitem_draw_no.
    IF wa_stb-upskz = 'X'.
      SELECT * FROM stpu INTO TABLE i_stpu
               WHERE stlty = wa_stb-stlty AND
                      stlnr = wa_stb-stlnr AND
                      stlkn = wa_stb-stlkn AND
                      stpoz = wa_stb-stpoz.
    ENDIF.
    LOOP AT i_stpu INTO wa_stpu.
      wa_outtab-upmng = wa_stpu-upmng.
      wa_outtab-ebort = wa_stpu-ebort.
      wa_outtab-uposz = wa_stpu-uposz.
      CONCATENATE v_ebort wa_stpu-ebort      INTO v_ebort
      SEPARATED BY space.
    ENDLOOP.
    MOVE strlen( v_ebort ) TO v_len.
    MOVE: 0 TO x,
      128 TO y.
    DATA : lt_tab TYPE TABLE OF swastrtab.
    DATA : ls_tab LIKE LINE OF lt_tab.
    DATA : lv_ebort TYPE string.
    CLEAR lv_ebort. CLEAR lt_tab.
    MOVE v_ebort TO lv_ebort.
    CALL FUNCTION 'SWA_STRING_SPLIT'
      EXPORTING
        input_string                 = lv_ebort
        max_component_length         = 128
      TABLES
        string_components            = lt_tab
      EXCEPTIONS
        max_component_length_invalid = 1
        OTHERS                       = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    IF lt_tab[] IS NOT INITIAL.
      LOOP AT lt_tab INTO ls_tab.
        CLEAR lv_ebort.
        MOVE: ls_tab-str TO lv_ebort.
        CONDENSE lv_ebort.
        MOVE lv_ebort TO wa_outtab-ebort.
        APPEND wa_outtab TO i_outtab.
        CLEAR:
        wa_outtab-matnr,
        wa_outtab-posnr,
        wa_outtab-zzitem_draw_no,
        wa_outtab-ojtxb,
        wa_outtab-menge,
        wa_outtab-meins,
        wa_outtab-uposz,
        wa_outtab-upmng,
        wa_outtab-verpr,
        wa_outtab-stprs,
        wa_outtab-bwprh,
        wa_outtab-lifnr,
        wa_outtab-name_sup,
        wa_outtab-potx1,
        wa_outtab-potx2,
        wa_outtab-netpr,
        wa_outtab-peinh.
*        wa_outtab-idnrk.
      ENDLOOP.
    ELSE.
      APPEND wa_outtab TO i_outtab.
    ENDIF.
    CLEAR v_ebort.
    CLEAR: wa_stpu.
    REFRESH: i_stpu.
    LOOP AT i_ampl INTO wa_ampl WHERE bmatn = wa_stb-idnrk.
    READ TABLE i_mara INTO wa_mara WITH TABLE KEY matnr = wa_ampl-ematn.
      IF sy-subrc = 0.
        LOOP AT i_outtab INTO wa_outtab
        WHERE
        idnrk = wa_stb-idnrk AND
        flag NE 'X'.
          wa_outtab-mfrpn = wa_mara-mfrpn.
          wa_outtab-mfrnr = wa_mara-mfrnr.
          SELECT SINGLE name1 FROM lfa1 INTO wa_outtab-name1 WHERE lifnr = wa_mara-mfrnr.
          MOVE 'X' TO wa_outtab-flag.
          MODIFY i_outtab FROM wa_outtab
          TRANSPORTING mfrpn mfrnr name1 flag.
          EXIT.
        ENDLOOP.
        IF sy-subrc <> 0.
          CLEAR:
          wa_outtab-matnr,
          wa_outtab-posnr,
          wa_outtab-zzitem_draw_no,
          wa_outtab-ojtxb,
          wa_outtab-ebort,
*          wa_outtab-idnrk,
          wa_outtab-menge,
          wa_outtab-meins,
          wa_outtab-uposz,
          wa_outtab-upmng,
          wa_outtab-verpr,
          wa_outtab-stprs,
          wa_outtab-bwprh,
          wa_outtab-lifnr,
          wa_outtab-name_sup,
          wa_outtab-potx1,
          wa_outtab-potx2,
          wa_outtab-netpr,
          wa_outtab-peinh.
          wa_outtab-mfrpn = wa_mara-mfrpn.
          wa_outtab-mfrnr = wa_mara-mfrnr.
          SELECT SINGLE name1 FROM lfa1 INTO wa_outtab-name1 WHERE lifnr = wa_mara-mfrnr.
          APPEND wa_outtab TO i_outtab.
        ENDIF.
      ENDIF.
      REFRESH i_stpu.
      CLEAR i_stpu.
    ENDLOOP.    CLEAR: wa_matnr1, wa_mfrnr, wa_outtab.
ENDLOOP.
Edited by: srinivasareddy j on Mar 9, 2011 7:16 AM
Edited by: srinivasareddy j on Mar 9, 2011 7:20 AM

"The page cannot be displayed" error in RWB with IE6 on Windows XP SP2

The following screens in the RWB give an error "The page cannot be displayed":
- End-to-end monitoring
- Alert Configuration
- Alert Inbox
My colleague who is on IE6 on Windows 2000 can display the pages. We have the same roles.
I searched on SAP notes and in the XI forum but could not find any response to this issue yet.
Any ideas?
Thanks.
Cedric

Not really an answer for you, but I run SP2 with IE6 and have no problems. Could be a problem with the host being defined for the Windows 2000 user, but not yourself. Some RWB connections are internally using the Fully qualified domain name while others don't. I know this was an issue with our adapter engine set-up at one point after we applied SP13.

In the view of Web Dynpro- "Page cannot be displayed screen"

Dear All,
In se80,During ABAP Webdynpro development,in the View "Page cannot be displayed screen" is appearing.....In SICF i have activated almost all services.....can anyone please help me out,so that i can develop webdynpros plsssss...........
Regards
Sajid
Edited by: shaik sajid on Feb 10, 2009 7:32 AM

Check Your internet Explorer connection settings Internet Option->Connection->LAN settings.
Try playing around with it. We had the same problem in the past.
Greetings
Prashant
P.S- Points welcome

I am not able to upload all the contacts into icloud and get into my new iphone 6

Hi I am trying to sync all the contacts in my old iphone 4 to iclud.
and so not able to sync only my contacts i think i got all my photos synced.
can any help me in that.

Hi Kinnera2740,
On the old phone go into Settings > Mail, Contacts, Calendars. Are there any email accounts listed here? Such as Google, Yahoo, Hotmail, etc?
If so, tap on each of them and check the 'Contacts' option. If it is turned on, this means that contact syncing is enabled for that account and that your contacts may already be synced to that mail account.
Also check Settings > iCloud and look for the 'Contacts' option. Is it enabled? If so, then it is possible that some contacts could be synced to your iCloud account as well. You can check to see which contacts are in which account by going to the Contacts app on your old phone and pressing the 'Groups' button in the top left corner. You may see several groups here. Uncheck all groups and then check each group one at a time to check and see how many contacts are synced to each account. You may need to add the same mail accounts to your new phone and enable contact syncing to have the contacts from the mail servers sync down to the new phone.

Urgent..When clicked on one of the sub tab layout .. page cannot be display

Hi All,
We have a page with a subtablayout region with 3 subtabs in that.
It is working in some instances and in one instance we are getting Page cannot be displayed error when one tab is clicked.
Can any one give some light on this?
Thanks
Soujanya.

Hi ,
It is custom page.
Soujanya.

Not able to see all the SAP tables from CR 2008

Hi All,
1)I am not able to see all the SAP database tables(DEV server) from Database expert menu in CR 2008. Only tables those start with alphabet letters upto A & B are visible. I checked the database connection>right click>options> found no filters as well.
We are using the CR 2008 trial version with SAP ECC.
2) When i am trying with Production Server of SAP ECC, I am not able to logon to the SAP from CR 2008. It is giving error message
as : LOGON FAILED : User USER1 has no RFC AUTHORIZATION for function group SYST
Please help me to resolve these. Thanks in advance.

Thank you very much ingo.
You helped me a lot.
One more question, when I am trying for SAP database connections say for ex: 10.57.410.70, again and again some times the connection is getting saved in my connections with as new versions/variants like
10.57.410.70_1 or so. How to overcome this.
Thanks in advance ingo
Badari

Database Home Page - The page cannot be displayed

Hello Oracle Gurus,
Thank you in advance for your response.
I'm running Oracle Database 10g Express Edition on Windows XP. When I launch the Database Home Page in IE I get a "The page cannot be displayed" error.
I have gone through several posts on this forum and I have tried the following 5 things:
1. I have stopped the database (net stop ...) and re-started the database (net start ...). This did not fix the problem.
2. I checked the reading of "select open_mode from v$database;" this returned:
OPEN_MODE
READ WRITE
I assume this is what it should be.
3. I checked the reading of "select status from v$instance;" this returned:
STATUS
OPEN
I assume this is what it should be.
4. In IE -> Tools -> Internet Options -> Security -> Local intranet -> Sites -> Advanced, I added 127.0.0.1 to the local intranet zone.
5. I restarted my WinXP PC.
None of the above things worked.
Does anybody have any suggestions of things to try to get the Database Home Page up and running?
Please note that I am a newbie to Oracle so please write your response at the simplest possible level.
Thanks,
K

There's a specific XE forum where they may have better answers than here. See Cannot access Oracle XE database home page

Receive "The Page cannot be displayed" in the page header within FBL5N

I have a user that started getting "The Page cannot be displayed" error message in the web content header after running FBL5N. The computer is running SAPGUI 710 and Windows XP SP3. I have already checked the FEATURE_DISABLE_MK_PROTOCOL settings in the registry. Any help and guidance would be appreciated.

you must be using SAPGUI 7.10 patch level 15 or above.
I have a feeling that you upgrade to IE8 on that workstation...

The search service is not able to connect to the machine that hosts the administration component

Hi
After uninstalling the binaries, and reinstalling / joining back to the farm, everything seems happy expect search.
When we try and start the Search Service back, it takes us to the Search Application section, and shows this message;
The search service is not able to connect to the machine that hosts the administration component
How can I get search to work again, or get around this error?
I am pretty inexperienced with Search

Hi Tibsy80,
For your issue, it can be caused by the search admin timer job was disabled.
Run below PS command to know the status:
Get-SPTimerJob job-application-server-admin-service | fl
If it returns “IsDisabled: True”, ran below PS command to enable the service:
Enable-SPTimerJob job-application-server-admin-service
Then run below PS command to stop and start the timer and IIS reset:
Net Stop timer
Net start timer
iisreset
Then wait 1-2 min and try browsing to the SSA again.
Reference:
http://neelb.wordpress.com/2012/01/19/the-search-service-is-not-able-to-connect-to-the-machine/
Also you can refer to the blogs:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/b04498ec-78d1-4bb9-8077-0481977cef10/the-search-service-is-not-able-to-connect-to-the-machine-that-hosts-the-administration-component?forum=sharepointadminprevious
http://davidbajak.com/blog/post/2011/09/29/Fix-SharePoint-2010-Enterprise-Search-After-Using-AutoSPInstaller-Script-Installer.aspx
Best Regards,
Eric
Eric Tao
TechNet Community Support

I can not enter the crs administration lost the password.

I can not enter the crs administration lost the password.
How could retrieve the password to enter the administration interface crs?
Please help me,
Natalia

For versions prior to version 8, there is a procedure to do this. You'll find the details documented in this thread:
https://supportforums.cisco.com/message/3196728#3196728

Not able to browse to the CRS Administration URL and "Page Cannot be Displayed error appears"

Similar Messages

Maybe you are looking for