Not able to burn project

I have completed my project but am unable to burn it to a DVD. I have tried several different blank DVDs (Memorex DVD+R), made sure I have enough memory, confirmed that the DVD player can burn to this type of DVD, and made sure all of the elements are available to the project. But no luck.
I am trying to get this done for a Christmas gift. If anyone has any ideas, I would greatly appreciate it.
Thanks,
Kevin

I figured out the problem. I was using iMovie HD 5.0.2 to create the project. Then I attempted to burn it with iDVD 4.0.1. Apparently there is some type of conflict with this set up because when I upgraded to iDVD 5.0.1 it worked fine. Instead of the blank DVD being ejected after insertion, iDVD 5 immediately started rendering for burn.
Kevin
iMac G4   Mac OS X (10.4.3)  
iMac G5   Mac OS X (10.4.3)  

Similar Messages

  • I am not able to burn a CD on Itunes

    I am not able to burn a CD on Itunes. When I click burn it opens up the CD drive and I put in a black CD. When it goes back in it shows the computer is reading the disk, but then suddenly stops. No error message, just stops. At that point I did a diagnostics test and the following error appeared. Can anyone help me?
    The last failed audio CD burn had error code -128(0xffffff80). It happened on drive D: HL-DT-ST DVDRAM GMA-4020B on -128(0xffffff80) media at speed 0X.

    You need to update your Mac OS X to at least 10.6.8.
    Apple menu > Software update.

  • I am not able to burn a cd   from my   mac pro osx  . it tells me no supported software. what do i do

    I am not able to burn a  CD  from my Mac pro OSX 10.6.3.  how do i download the software . the message i get is no supported software

    You need to update your Mac OS X to at least 10.6.8.
    Apple menu > Software update.

  • In P6 version7 not able to copy project with the baseline.

    Hi,
    In P6 version 7 it is not able to copy project with the baseline. It copies only the schedule.
    Please help.
    regards,
    Baber.

    Tried the solution from another thread but did not work completely (as warned) - the workaround didn't quite work for me either:
    https://discussions.apple.com/thread/1398462?start=0&tstart=0
    Ended up taking a backup, did a fresh install, created the account as the first one so that it gets the same UID as the other Mac (on which my account was the first) and restored my data - was painful but finally on track.

  • I am not able to burn a cd from a video file.

    I Mac OSXIC .6X
    I am not able to burn a cd from a video file. Here is the message that I get :
    " the disc can't be burned because the Device failed to calibrate the laser power level for this media ."
    Can anybody help?
    Thanks .

    Try using a different brand of CD.......
    Failing that...
    Your CD Writer may need servicing/replacing....

  • I am not able to burn a purchased song to a CD. Any clues?

    I am not able to burn a purchased song to a CD.  I follow the instructions, and it looks like it will start, but it never happens, it ends after about 20 minutes, saying that an unknown error occurred (4000).  Anyone know how to remedy this?

    You need to update your Mac OS X to at least 10.6.8.
    Apple menu > Software update.

  • Not able to assign Project to the Urgent Change Request with Developer Id with the existing Authorizations. With SAP_ALL authorization, everything works fine.

    The Urgent Change request is in created status and I am not able to assign project to it. Also I am not able to change the status of the change request to In developement with developer's Id. Everything works fine if i assign SAP_ALL authorization to the developer.
    Below are the roles assigned to Developer ID -
    SAP_CM_SMAN_DEVELOPER
    SAP_SM_CRM_UIU_FRAMEWORK
    SAP_SM_CRM_UIU_SOLMANPRO
    SAP_SM_CRM_UIU_SOLMANPRO_CHARM
    SAP_SMWORK_BASIC_CHANGE_MAN
    SAP_SMWORK_CHANGE_MAN
    SAP_SOCM_DEVELOPER
    Z_S001
    ZSAP_SOCM_DEVELOPER
    Issue screen -
    SU53 for Developer-
    Please suggest which roles/Authorization should be assign to Developer Id.
    Thanks
    Kavita

    Hi Kavita,
    Copy these roles to Z-roles
    SAP_CM_SMAN_DEVELOPER
    SAP_SM_CRM_UIU_FRAMEWORK
    SAP_SM_CRM_UIU_SOLMANPRO
    SAP_SM_CRM_UIU_SOLMANPRO_CHARM
    SAP_SMWORK_BASIC_CHANGE_MAN
    SAP_SMWORK_CHANGE_MAN
    SAP_SOCM_DEVELOPER
    Assign this to user.
    Put a stace using ST01.
    Find that object and modify/add in your custom role.
    Regards,
    Divyanshu

  • Satellite U200: I am not able to burn DVDs

    I have a problem with the burner of DVD :
    Since I formated (and then reinstall with recover CD that was with computer at beggining), I am not able to burn DVDs !
    How can I do to recover that !!
    And also, that's weird, instead of showing one DVD player, there are 2 : One for CD, one for DVD, when it's the same...
    I'm able to read DVDs, but I am not able to burn them :(

    > And also, that's weird, instead of showing one DVD player, there are 2 : One for CD, one for DVD, when it's the same...
    This is very strange its confusing that two ODDs appears in MY Computer
    What you could do is to remove the ODD (CD/DVD) drive from the device manager and then to reboot the notebook.
    Please check if the CD/DVD would be recognized correctly after the new reinstallation.

  • I am not able to burn CDs.

    I am not able to burn CDs each time I open Itunes I get the following error.  "Itunes was not properly Installed. If you wish to import or burn CDs you need to reinstall Itunes"  And when I try to burn a CS using Itunes I get that nu Burner is found.
    I have tried removing and redownloading and updating drivers from this link http://support.apple.com/kb/TS2308
    I have tried uninstalling itunes and its components but nothing seems to fix this issue.
    Below are the diagnostics.
      Microsoft Windows 7 x64 Enterprise Edition (Build 7600)
    LENOVO 2537O38
    iTunes 10.6.1.7
    QuickTime not available
    FairPlay 1.14.37
    Apple Application Support 2.1.7
    iPod Updater Library 10.0d2
    CD Driver Not Available
    CD Driver DLL Not Available
    Apple Mobile Device 5.1.1.4
    Apple Mobile Device Driver 1.59.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.5.502
    Gracenote MusicID 1.9.5.115
    Gracenote Submit 1.9.5.143
    Gracenote DSP 1.9.5.45
    iTunes Serial Number 0033AD3C03113E90
    Current user is an administrator.
    The current local date and time is 2012-04-19 18:30:55.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    NVIDIA, NVIDIA NVS 3100M
    **** External Plug-ins Information ****
    No external plug-ins installed.
    iPodService 10.6.1.7 (x64) is currently running.
    iTunesHelper 10.6.1.7 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM
    Failed while scanning for CD / DVD drives, error 2380.
    Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.

    What can we do?

  • Users are not able to edit projects even with right permissions

    Hello,
    We have a weird issue. Your help or inputs is appreciated.
    A user is not able to edit projects in SAP PPM 50 unless 1)the project is created by the user and 2)user has access to ACO_SUPER auth object. For the projects, the user is trying to edit, we made sure user has write ACL access in the administration tab of the project.
    Obviously, we can't give all users ACO_SUPER access. Please advise how to proceed.
    Thanks in advance

    Hi Pranith,
    You are right..ACO_SUPER is not recommended for all users, it's an super user access.
    In PPM-Project management, there are two authorizations
    1) General Authorizations
    2) Project Specific authorizations
    General authorizations:
    This is provided to user using a backend PFCG roles like 'SAP_CPR_USER' which contains business partner view access and other similar roles are assigned for project creation, template creation etc.,
    Project Specific authorizations:
    This authorizations are provided using ACL 'Authorizations' tab within the project and here you have different authorisation activities like admin, write, read & none.
    As you said, the user who creates the project will get 'Admin' authorization and after that if you want give access to other users, then you need to add manually users in the project definition-authorisation tab or you can provide default authorization through project role type.
    Have you added the users manually in authorisation tab?
    Regards,
    Ravi

  • RH 9 - Not able to edit project settings (styles)

    Hi.
    Once I import my FM 9 files I'm not able to edit my project settings via the Project Settings dialog. I can access the dialog, but when I try to edit the Style settings, none of the current style settings display. I followed the directions in Online Help and it did not indicate that this could not be done with imported documents as opposed to linked documents. Could that be the reason why?
    Thanks in advance.

    While importing a FM document, the style settings can be done through import wizard. Following steps may be followed.
    1. Click File->Import->FrameMaker Document menu item.
    2. "Import File" dialog opens. Browse and select the desried FrameMaker document.
    3. "Content Settings" dialog appears. Do any TOC/Index/Glossary related setting if required. Click Next.
    4. Click "Edit" button.
    5. "Conversion Settings" dialog opens where style related settings can be done. The dialog will show all the styles of the FrameMaker document being imported currently.
    This way style settings can be done for FrameMaker document being imported.
    The "Conversion Settings" dialog opened through "Project Settings" dialog displays the styles of all the linked documents and not of imported document. However, if some settings are done for a linked document, those settings are available by default for all the FM documents being imported in the project.
    I hope this resolves the issue.
    Please let us know in case you have further queries.
    Mayank

  • I am not able to burn DVD on my Satellite A60

    Hi!
    I have a Toshiba Satellite A60 with a Pioneer DVD-RW DVR-K13A. And Every time I try to burn a dvd it doesn't work. The drive detects the dvd but I can't burn it. I've tried several burning programs such as Record Now! and Intervideo WinDvD Creator. Do I need to upgrade the burner or something.
    And the format of the dvd's are DVD-R, and I checked the manual, and it says I'm able to burn DVD-R.
    Thanks in advance.
    Message was edited by: Slintas

    Hello
    On this way it is not easy to say if there is just some small problem or maybe malfunction but according to your description I presume that the drive can read but not write DVD medias. In this case it is really possible that drive is defective.
    If you have tested it with different DVD medias and different burning applications I am pretty sure that drive is defective.

  • Delegate not able to edit project in project professional

    I have a scenario where the delegate is not able to edit the project in project professional which already under the ownership of the person whom he is delegated for. 
    Is this standard feature or limitation? Any fix or references from Microsoft? 
    Regards, Syed Faizan ur Rehman, CBPM®,PRINCE2®, MCTS

    Hi,
    this is just a limitation. Delegation does only work in PWA, not in client. Sorry!
    See also
    http://blogs.msdn.com/b/project/archive/2010/03/19/project-2010-introducing-delegates.aspx (does also apply to 2013), section 3.c "Project Professional. The delegate session does not apply to Project Professional."
    Regards
    Barbara
    To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
    an appropriate solution faster. Thanks for your support!

  • IMac G5 not able to burn dual-layer DVDs

    My iMac should be able to burn dual-layer DVDs, but it always seems to fail part way. It manages to burn DVDs and CDs fine.
    I've read about using compressed air inside the drive to clean it, but I'm not sure how to go about doing that.
    It's a MATSHITA DVD-R UJ-846 drive.

    Have you tried repairing permission & restarting?
    Have you tried a different brand of DVDs?
    Top forum favorites
    CDs
    FUJI
    TDK
    Verbatim
    DVDs
    Maxell
    "I've read about using compressed air inside the drive to clean it, but I'm not sure how to go about doing that."
    If your drive needs cleaning, cleaning kits can be purchased from any store that sells CD/DVDs.

  • Macbook Pro not able to burn from External DVD drive

    Hi there,
    I just bought a Samsung SE-208DB external drive for my 2011 Macbook Pro 8,1 13inch and at first the drive was detected by my Macbook Pro and I was able ot burn a disk but now when I plug in the device, it powers on for a bit then powers off to were I can't eject the disk anymore.Then sometimes it works just fine. I am using an external USB hub with AC plug power so I am confident power to the USb isn't an issue. I just wanted to know are Macbook Pro known to have issues with external drives?
    And for those wondering why I don't just use the internal DVD on my Macbook Pro, I replaced it with an SSD for dedicated Windows 7 operating system.
    Any ideas on how to approached this problem? Should I just get another brand of external DVD drive. I know I can't get Apples as for some strange reason, Apple makes those only compatible with Macs that didn't come with DVD drives like the Macbook Air.
    Thanks

    Ok I solved it.
    The problem is that the drive uses too much power from the usb port.
    You can use one of those cables with on one end two usb plugs and on the other end a mini usb. Connect the coresponding usb for power to an iphone charger or any 5v/1amp charger.
    Or you can do what I did. I used a usb hub. In one usb port I connected my iphone charger and the drive to another usb port on the hub.
    I have just burned my first succesful disc.
    Regards

Maybe you are looking for