Not able to change display name in Forums

Hi SDN,
I am trying to change my display name in the forums posting by changing User Profile.
when i done it is showing in the Homw page ,but not in the Forums page.
Please check this out ,and let me know how can i do this.
Regards,
SReddy

Hi SReady,
Thanks for letting us know. I forwarded it to the developers. We will let you know once this is fixed.
Actually it takes a while until the change is replicated throughout the system. Can you check again to see whether your change made it to the forums?
I changed my display name to M Finnern, but so far it didn't make a difference.
Let us know, Mark.
Message was edited by: Mark Finnern

Similar Messages

Not able to change vendor name while creating a DC under a track in NWDS

Hi all,
I am trying to create a new DC under a track in NWDS.I am not able to change the vendor name .It is showing sap.com and the field is greyed out.Did anybody faced this issue earlier?
Need your inputs.
Thanks and regards,
Rajesh

Hi Rajesh
Please check this thread.
cannot create a new DC
You can create new SC with your name reservation and add to your track.
Hope this will help you.
Thanks
Arun

Not able to change the name of the attribute of the Table operator.

We are trying to create OMB scripts to automate certain tasks. As a part of this, there is a requirement to change the attribute name of table operators (which by default gets the name of the column). It is possible to change the attribute name from the GUI. But I was not able to do the same using OMB Scripting. Here is the script I used.
OMBALTER MAPPING 'TEST' \
MODIFY ATTRIBUTE 'GEOGRAPHY_ID' OF GROUP 'INOUTGRP1' OF OPERATOR 'TEST' \
SET PROPERTIES(BUSINESS_NAME,PRECISION,DESCRIPTION) \
VALUES('MEMBER_ID',2,'MEMBER')
This script was to change the name of the attribute - GEOGRAPHY_ID of the table operator TEST.
From what I can make out from the Scripting reference, changing BUSINESS_NAME of the attribute should do the trick but it is not happening. The syntax looks correct as the precision of the column changes.
Am I missing something? Or is it a limitation or a bug?
I use OWB client 10.2.0.1.25 and OWB repository 10.2.0.1.0.

Hi!
I'm using successfully
OMBALTER MAPPING '$mapName' MODIFY ATTRIBUTE '$attrName' OF GROUP '$groupName' OF OPERATOR '$joinName' RENAME TO '$newName'
Regards,
Carsten.

Not able to change exportfolders value in MBeans for FRConfig.cmd for Hyperion Financial reporting 11.1.2 version.

I am not able to change exportfolders value in MBeans for FRConfig.cmd for Hyperion 11.1.2 Financial reporting .
When I enter the value , it just vanishes. Am I missing something here.?
I need to set export path for PDF generation in Hyperion financial report for batches.

Edit FRConfig.cmd and update
set EPM_ORACLE_INSTANCE=%MIDDLEWARE_HOME%\user_projects\epmsystem1
update epmsystem1 to the correct epm instance name
Cheers
John
http://john-goodwin.blogspot.com/

User not able to Change Password in Webaccess

We are running GroupWise 7.0.3 HP3. We have one user who is not able to change her password in Webaccess. Whenever she tries, she get the following error message in Webaccess
Ldap Password Change Failed. Contact your system administrator.
When I look at the POA screen on the server, I see the following error message.
LDAP Error: 53.
Her account is not disabled, expired or locked. I get the same error message when the account has an unlimited number of network aconnections.
If I change the password in ConsoleOne and log into the account, I get prompted change my password because it has expired.
Thanks

n,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Sales Order form error "Not able to retrieve Display values for Service"

Hi,
Few of our orders flash the below error message when the order is queried
"Not able to retrieve Display values for Service"
Below are the points I observed
1.The orders I am referring to are imported order via EDI interface.
2.The service reference type code has value of ORDER, however no other service related fields (like service reference line id) have any values.
3. The item is not a service item (service tab in Item setup is disabled)
4. Same item when imported with value of "Customer Ordered" in "service reference type code" field, does not throw an error.
5. If I update "service reference type code" with value null or change it to CUSTOMER_PRODUCT, the error disappears.
Can someone explain the significance of this column value and what could have been causing this error message?
May be there are some dependent fields/setups which must have a value when service reference type code =ORDER.
Thanks in advance,
JC
Edited by: user10174990 on Oct 25, 2012 10:58 AM

Hi,
Maintain the dafault values using Tcode OISF with respective to Planning Plant you have to maintain the following values like Order Type, Main Work Center, Maint. Plant,Group,Group Counter,Business Area & Task List type.
or
Apply these OSS note 150732 / 195993.
regards,
Venkatesan Anandan

My MacBook Pro keeps making copies of a document that I am trying to save. I don't want to duplicate the file. I only want to save it on both my hard drive and my external hard drive. I do not want to change its name for every save, which the computer see

My MacBook Pro keeps making copies of a document that I am trying to save. I don't want to duplicate the file. I only want to save it on both my hard drive and my external hard drive. I do not want to change its name for every save, which the computer seems insistent on doing. Help!!

11lizzyp wrote:
can't be saved because the file is read-only.
I did not create the file to be read-only. I created to be able to continue to add to it as I work on it.
More on versions here:
http://support.apple.com/kb/ht4753
local snapshots:
http://support.apple.com/kb/HT4878
Sounds like a permissions problem ie read only.
If running repair permissions from your DiskUtility.app does not sort it,
Someone should jump in here with erudite and concise fix.

Not able to change Company Code in f-58

I have done a payment with T-code f-58 in Co. Code XXXX.
Now I want to do a payment in Co. Code YYYY with f-58 but I am not able to change Co. Code.
Co Code field is in display mode.
I have searched on SCN but did not get any correct solution.
Plz suggest

Dear nisit shah, Press F3 - then the company code will be in the edit mode and you can change the company code. n.selvakumar.

Change display name of workflow email address in sharepoint 2010

Hi
How I can change display name of workflow email address in sharepoint 2010. I want to configure display name (from address)of email
for each site collection separately.for example I want to change "software unit"
in below pic to another name for my software unit site collection.
How I can do this?
Thanx.

Hi,
According to your post, my understanding is that you want to change display name of workflow email address in sharepoint 2010.
In my environment, if I assign a task to a user, the email is as below:
The “test” is the site name, the [email protected] is the “From” user.
Do you want to change the “From” field in the workflow?
If so, you can have a look at the "Send email extended" custom SPD workflow activity (http://www.codeplex.com/SPDActivities
) which allow you to specify the sender.
Here are some similar threads for your reference:
https://social.technet.microsoft.com/Forums/en-US/22d95510-95b7-4882-b988-4038e59fb031/how-to-change-the-display-name-for-sharepoint-emails-sent-using-workflows?forum=sharepointgeneralprevious
http://sharepoint.stackexchange.com/questions/19186/changing-from-email-address-in-sharepoint-designer-2010-workflows
http://sharepoint.stackexchange.com/questions/61964/how-to-change-the-from-address-in-feedback-workflow-email
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Not able to change UOM in material master for a material

Hi all ,
I have a issue with changing of the UOM in the material master , IN MMO2 after changing the UOM , in Display error , its showing the error as : The base unit of
                                     The reasons for
                                     Manual reservation
                                     Reserv.No   , Item - No data
                                     Purchase order - 30017056 , Item 1 - 1
There is no stock in the previous as well as current period , and deleted the PR , still i am not able to change
Please help urgently
Thanks in Advance
Neha

Hi Satyajit,
Please look at OSS Note 1069560 - Data inconsistencies: Activating integration. models in parallel, if this helps you.
Since Gross data of material is in the basic view, it is common across plants , whereas, IMs are normally designed to have material masters at plant level.
We may have same material in different IMs with different plants. Therefore changes of the basic view fields are then contained in multiple IMs. SAP advises to have a larger IM or sequential activation of IMs.
I hope this will help you .
Regards
Datta

How to change display name of the attachment item attribute.

Hello Experts
I have a requirement to send a notification with attachment but attachment name should be attachment name,
Is there any way to change the display name of the Attachment
Please advise;
Thanks
Rajesh.

Azmathulla,
It is not possible to change the name of the server, but you can add a label to it (see attached screenshot). And yes, it can be done during production hours, this doesn't affect the production data.
Please let me know if this answers your question.

Change display name of the server under Equipment

is it possible to change the display name of the LIVE / PRODUCTION blade under equipment --> Chasis -->Servers to our own naming standards.
Attached is the screenshot of current names.
UCS Manager Version 2.1(3a)

Azmathulla,
It is not possible to change the name of the server, but you can add a label to it (see attached screenshot). And yes, it can be done during production hours, this doesn't affect the production data.
Please let me know if this answers your question.

SRM 7.0 Buyer not able to change SC in Sourcing cokcpit.

HI Everyone,
I remember, in SRm 5.0, buyer can change shopping cart whole sourcing from sourcing cokpit. Has this been changed in SRM 7.0? We are nota able to change the SC in Sourcing cockpit.
Thanks,
SG

SAP rules says that
You cannot change a shopping cart directly from the sourcing application.
http://help.sap.com/saphelp_srm70/helpdata/en/d8/33ec56f17f4404806072749f7e764f/frameset.htm
Since REQUESTER department requested only BUYER department has to source.
BUYER can identify the vendor and add / price only in the cockpit.
Since conflict between REQUESTER and BUYER department.
BUYER duty is whatever REQUEST department has requested needs to be sourced.
Note 1435354 - Sourcing Cockpit:Product Category field editable in SC
Add a shopping cart to the Purchaser's Workarea in the Sourcing Cockpit and click at the link of the Shopping Cart item the Shopping Cart item will be opened in change mode and the Product Category field is shown as editable. As per standard design of Sourcing Cockpit, the product category of the item should not be editable in the Sourcing Cockpit.This note corrects the error and displays the Product Category field of the Shopping Cart as read only.
Muthu

Change DISPLAY NAME

I install this messaging :
Sun Java(tm) System Messaging Server 6.2-8.04 (built Feb 28 2007)
libimta.so 6.2-8.04 (built 19:20:35, Feb 28 2007)
SunOS sunmail 5.10 Generic_125101-01 i86pc i386 i86pc
My problem is:
When user send email to internet user ( ex: yahoo.com or gmail.com etc. ) the messaging. must change the DISPLAY NAME with other DISPLAY.
ex: from: Giovanni <[email protected]>
on
from: External Mail <[email protected]>
I try with CONVERSION channel but it's change only body of mail.
### mappings
CONVERSION
IN-CHAN=tcp_*;OUT-CHAN=tcp_*;CONVERT Yes
### Conversion
! Append disclaimer to single part messages if the body part
! is text.
in-channel=tcp_*; out-channel=tcp_*;
in-type=text; in-subtype=*; part-number=1;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=0;
command="/opt/iplanet/sitescripts/change.sh footer.txt"
! Append disclaimer only to the first part of a multipart message
! if that part is a text message part. (part-number=1.1 is the
! first part of a multipart message).
in-channel=tcp_*; out-channel=tcp_*;
in-type=text; in-subtype=*; part-number=1.1;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=0;
command="/opt/iplanet/sitescripts/change.sh footer.txt"
### Script Change.sh
Change $MESSAGE_HEADERS
cat NEW_MESSAGE_HEADERS > $MESSAGE_HEADERS
But don't work.....
I try with reverse mapping but change only email address don't change display name
#### mappings
REVERSE
*|tcp_local|[email protected] $D$Y"NEW DISPLAY"[email protected]
I try with sieve filter but I don't know how change FROM.
### imta.cnf
tcp_local destinationfilter file:///opt/SUNWmsgsr/config/invia.filter
What is the correct way ? There are other way ?
It's possible change the Display Name ?
Thank's
Giovanni

Hi,
My problem is:
When user send email to internet user ( ex: yahoo.com
or gmail.com etc. ) the messaging. must change the
DISPLAY NAME with other DISPLAY.
ex: from: Giovanni <[email protected]>
on
: External Mail <[email protected]>
I try with CONVERSION channel but it's change only
body of mail. Correct, the conversion channel only deals with MIME body parts and not the email headers themselves.
I try with reverse mapping but change only email
address don't change display name
#### mappings
REVERSE
*|tcp_local|[email protected] $D$Y"NEW
DISPLAY"[email protected]
Haven't tried this myself but will take your word for it.
I try with sieve filter but I don't know how change
FROM.
### imta.cnf
tcp_local destinationfilter
file:///opt/SUNWmsgsr/config/invia.filterWith 6.3 you could use the deleteheader/addheader to remove the From: and replace it with something else - this ability doesn't exist in 6.2.
What is the correct way ? There are other way ?
It's possible change the Display Name ? Yes.
You can change the display name by using the PERSONAL_NAMES mapping table.
For example to change the following on outgoing email (via tcp_local):
From: Shane Hjorth <[email protected]>
to
From: What The <[email protected]>
1) Add the personalmap keyword to the tcp_local channel
2) Add the following mapping table to the mappings file:
PERSONAL_NAMES
*|[email protected] $YWhat$ The3) Rebuild config
./imsimta cnbuild; ./imsimta restart
This is all explained in the messaging server admin guide "Handling Personal Names in Address Header Lines".
Regards,
Shane.

Not able to change the size of the Drive

Hello ,
I have a template with 50 GB C drive and I want to a create a VM having 100 GB C drive using this template . But I am not able to change C drive size from the edit settings . After changing the size from the edit settings to 100 Gb , I found that in newly created VM the size of the C drive was 50 Gb.
If it is possible to change the C drive size to 100 Gb without making any changes in template ?
Can anyone suggest me how to do this ?

This question should be posted in a forum area related to a product - are you using vSphere, and if so which version?

Not able to change display name in Forums

Similar Messages

Maybe you are looking for