Not able to change exportfolders value in MBeans for FRConfig.cmd for Hyperion Financial reporting 11.1.2 version.

I am not able to change exportfolders value in MBeans for FRConfig.cmd for Hyperion 11.1.2 Financial reporting .
When I enter the value , it just vanishes. Am I missing something here.?
I need to set export path for PDF generation in Hyperion financial report for batches.

Edit FRConfig.cmd and update
set EPM_ORACLE_INSTANCE=%MIDDLEWARE_HOME%\user_projects\epmsystem1
update epmsystem1 to the correct epm instance name
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Not able to change plan value in appropriation request

Dear Gurus
I am not able to the change the investment cost in plan value tab after creating an appropriation request. We have done an upgrade from ECC6 to EHP6. Earlier we were able to change. We want to change the plan value ,since an approximate value is entered while creating and later, on we change the value to the cost incurred.
Please help
Regards
Vidhyadharan

Hello Vidhya,
Also check below SAP note
1884400 - Unable to change the ECP cost estimate
201517 - Updating plan values for appropriation requests
Regards
Tushar

Not able to change the value in 'sold to party' once disabled.

Hi,
I am validating the Business partner entered in the 'sold to party' field while creating a sales order in webclient UI.
The error message pop up as expected but the field becomes disabled. I tried changing the field to editable by setting rv_disabled = 'FALSE' in method GET_I_SOLDTO_NAME.
Now the field is editable but it does not take the new value which i enter. it takes the old value only.
How do i make the field to accept new values?
Thanks in advance.
Regards
Shanthi.

Hi Shanthi,
Just check small config in your Partner determination profile if it helps you:
Path: SPRO->CRM->Partner Processing->Define Partner Determination Procedure-
Open you Partner determination Profile and go in details Sold-to-party partner and Mark Check box Changable to allow to make changes in partner.
Regards,
Dipesh.

Not able to change values in the Property Inspector

Hello!
Can some one please help me with this. I was working in
Director when I noticed that all of a sudden I wasn't able to
change the values in the property inspector, specifially the sprite
properties such as the x and y coordinates and the width and
height. I'll type in a value and then I will get an error sound and
it will revert to the previous value. How can I fix this??
Thanks!

Hi Ringerz,
I've seen the PI lock up sometimes. What usually works is to
switch to List Viw
Mode. Never have trouble there. Then, close Director and
reopen. Think it's jus a
bug that hasn't been fixed yet.
regards
Dean
Director Lecturer / Consultant / Director Enthusiast
http://www.fbe.unsw.edu.au/learning/director
http://www.multimediacreative.com.au
email: [email protected]

Sales Order form error "Not able to retrieve Display values for Service"

Hi,
Few of our orders flash the below error message when the order is queried
"Not able to retrieve Display values for Service"
Below are the points I observed
1.The orders I am referring to are imported order via EDI interface.
2.The service reference type code has value of ORDER, however no other service related fields (like service reference line id) have any values.
3. The item is not a service item (service tab in Item setup is disabled)
4. Same item when imported with value of "Customer Ordered" in "service reference type code" field, does not throw an error.
5. If I update "service reference type code" with value null or change it to CUSTOMER_PRODUCT, the error disappears.
Can someone explain the significance of this column value and what could have been causing this error message?
May be there are some dependent fields/setups which must have a value when service reference type code =ORDER.
Thanks in advance,
JC
Edited by: user10174990 on Oct 25, 2012 10:58 AM

Hi,
Maintain the dafault values using Tcode OISF with respective to Planning Plant you have to maintain the following values like Order Type, Main Work Center, Maint. Plant,Group,Group Counter,Business Area & Task List type.
or
Apply these OSS note 150732 / 195993.
regards,
Venkatesan Anandan

Not Able to Post Takeover Values using AS91

Hi Guys,
I am not able to post Takeover Values as of 12/31/2007. I gave the last closed fiscal year as 2007 and the system automatically took the takeover date as 12/31/2007. When I try to enter the dtat in Takeover values, it is greyed out. Can anybody explain why it is not allowing me to change values?
Thanks and Regards
Madhu Vutukuri

Hi,
Try this option -
1. Keep the cursor focussed on the field that you want to change
2. Goto Menu Edit >> Change field contents
A pop up will appear asking to change the value. Give the required value to be changed and save.
Regards,
Sridevi

Not able to change the roles through the ERM after uploading from ECC

Hi
We are not able to do the following activities after uploading the roles into ERM from Backend system
1) We are not able to see any transaction data but we are able to see org values.
2) We are not able to change the roles from ERM.
Vserion and support pack leavel : GRC5.3 and 13
Please help in this.
Thanks in advance.
With Best Regards,
support

How are you trying to do this? using oiddas ?
Can you explain more in detail?
Greetings.

DRm 11.1.2.103: Howto: Not allowed to change property value after value set

Tips on how to ensure this?
I would appreciate help on solving the following request: a property must be set by a user (ex property 'Entitytype' of a Unit node). However as soon as the property has been defined (value of property is not blank) this cannot be overridden again (example; if Unit node is set to COMPANY it cannot be set to DEPARTMENT, but the property value must be allowed to be set in the first place and overridden if blank only) Also remove value of this property should not be allowed if value is not blank or 'nothing. I assume this must be a common request, but I cannot get my head around how to solve this in DRM since DRM does not have a way to check the 'previous value' of a propery when validating (as far as I know)

Hi,
Try this
1. Create a derived property e.g. Can_Change with a formula like this
Equals(Date,Now(),AddedOn()) --depending on your requirement you may either use AddedOn() or ChangedOn()
This will return True of the system date and create date are same. which mean user should be able to change the value for the first time.
Now create a real-time validation based on the above property to stop the user from changing the value.
hope this helps.
SJ

HT4847 I have a new iphone and cannot delete the backup from icloud. It says that it is in use. I have read some of the other threads and it only seems to be haphazard solutions. Is there a definite way to fix this? I am not able to change icloud accoun

I have a new iphone and cannot delete the backup from icloud. It says that it is in use. I have read some of the other threads and it only seems to be haphazard solutions. Is there a definite way to fix this? I am not able to change icloud accounts.

Follow the steps in wjosten's post here: https://discussions.apple.com/message/13356770#13356770 (for Windows, substitute Outlook in step 2).

Not able to change sales stage from requirtement to reqmt analysis

in opportunity Not able to change sales stage from requirtement to reqmt analysis
Error Message:SBL-DAT-00284
Details error msg is:
Unable to evaluate workflow rule for foll reason
Update probability between 0 & 100%(SBL-ODS-00500)
Edited by: user1074008 on Sep 22, 2010 10:17 PM
Edited by: user1074008 on Sep 22, 2010 10:18 PM

Looks like a bug...
Previos Post Activity Status = Submitted - Access Denied

How do I change the country for my iTunes account? I had purchased some itunes gift cards and i have about .75USD left in it. I am not able to change the country because i have to clear the account balance. there is any way I could spend that money???

I would like to change my country from US to Thailand in the iTunes Account. I purchased some iTunes gift card to purchase some apps and since ever i was not able to change my account balance to 0.00USD which is needed in case I want to change my account country. I appreciate if some body can help with this

1) Buy something 75c or greater and charge the balance to a credit card.
or
2) Contact Apple and ask them to keep the 75c
iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store

Not able to get net value in billing document vf01.

Hello Sir,
I am trying to create an invoice for milestone billing plan. I have maintained copy controls at item level as follows
coplying req. 002
vbrk/vbrp        001
pricingtype     D
billing qntty     A
while i save contract and trying to create billing document system is not able to show net value in billing document.
Please guide me to get the net value in the billing document.
looking forward to reply.

Sir, May I know what is the process to confirm milestone billing. as per my knowledge we release billing block and then billing document is processed.
In my case even if i release billing block billing document succesfully created and saved but net value seems zero.
I am not aware of complete proces.
reply would be appreciated.
thanks

Not able to edit the value options in LKM

Hi
I have recently upgraded to ODI 11g .
In that we are not able to edit the value options in LKM.
(i.e.. editor window is not appearing, not able to edit the text.
Please let me know the solution .
Thanks

We were using JDK1.6.0_29 and it was not supporting ODI 11.1.1.5, so we have uninstalled the JDK1.6.0_29 and reinstall the JDK1.6.0_11.This solves our issue.
Thanks a lot!!

User not able to Change Password in Webaccess

We are running GroupWise 7.0.3 HP3. We have one user who is not able to change her password in Webaccess. Whenever she tries, she get the following error message in Webaccess
Ldap Password Change Failed. Contact your system administrator.
When I look at the POA screen on the server, I see the following error message.
LDAP Error: 53.
Her account is not disabled, expired or locked. I get the same error message when the account has an unlimited number of network aconnections.
If I change the password in ConsoleOne and log into the account, I get prompted change my password because it has expired.
Thanks

n,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

My iCloud is defaulting to an old Hotmail address that I no longer use, my apple ID is currently functioning fine with a gmail account. I'm not able to change my iCloud email on my phone or on desktop... Any advice?

My iCloud is defaulting to an old Hotmail address that I no longer use, my apple ID is currently functioning fine with a gmail account. I'm not able to change my iCloud email on my phone or on desktop... Any advice?

You would have to change your Apple ID back to your old hotmail address (https://appleid.apple.com ) in order to turn off "Find My iPhone" and change the iCloud ID. After you changed it back and verified your old hotmail address you should be able turn off "Find My iPhone" and to temporarily delete your iCloud account from your devices. After that you can change your Apple ID back to your gmail address again. After it is verfied, you could add back your iCloud account by using your gmail address.

Not able to change exportfolders value in MBeans for FRConfig.cmd for Hyperion Financial reporting 11.1.2 version.

Similar Messages

Maybe you are looking for