Not able to change product key in windows server using SLui command

I have installed windows server 2012 r2datacenter and when I am trying to insert the product key using slui 3 command (in run windows),I am getting an error code as
0x80070003(The system cannot find
the path specified error)
I have tried running sfc/scannow as well but it did not work.
Kindly help me .

Hi Ashish,
Would you please let me confirm whether want to
change the product key or activate the Windows Server 2012 R2 Datacenter? Just a confirmation, thanks for your understanding.
Please use the
Volume Activation Management Tool (VAMT) and check if help you to change the product key.
In addition, please
run the
Microsoft Genuine Diagnostics Tool and check if find more relevant clues.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

I need to downgrade Product key from Windows server 2012 STD edition to Windows server 2008 ENT edition

I have a product key for Windows server 2012 Standard ROK edition and need to downgrade it to windows server 2008 Enterprise edition.

Hi,
Based on my research,
Windows Server 2012
Standard edition
can be downgrade to any prior version of Standard and Enterprise or Essentials editions.
For more detailed information, please refer to the links below:
Understanding
downgrade rights
WS2012_Licensing-Pricing_FAQ
Best regards,
Susie

Not able to extract performance data from .ETL file using xperf commands. getting error "Events were lost in this trace. Data may be unreliable ..."

Not able to extract performance data from .ETL file using xperf commands.
Xperf Commands:
xperf –i C:\TempFolder\Test.etl -o C:\TempFolder\BootData.csv –a process
Getting following error after executing above command:
"33288636 Events were lost
in this trace.
Data may be unreliable
This is usually caused
by insufficient disk bandwidth for ETW lo
gging.
Please try increasing the minimum
and maximum number of buffers
and/or
the buffer size.
Doubling these values would be a good first at
tempt.
Please note, though, that
this action increases the amount of me
mory
reserved
for ETW buffers, increasing memory pressure on your sce
nario.
See "xperf -help start"
for the associated command line options."
I changed page size file but its does not work for me.
Any one have idea, how to solve this problem and extract ETL file data.

I want to mention one point here. I have total 4 machines out of these 3 machines above
commands working properly. Only one machine has this problem.<o:p></o:p>
Hi,
I consider that you can try to use xperf to collect the trace etl file and see if it can be extracted on this computer:
Refer to following articles:
start
http://msdn.microsoft.com/en-us/library/windows/hardware/hh162977.aspx
Using Xperf to take a Trace (updated)
http://blogs.msdn.com/b/pigscanfly/archive/2008/02/16/using-xperf-to-take-a-trace.aspx
Kate Li
TechNet Community Support

Problem: Not able to change Signature field reason code Dynamically using signatureSetSeedValue

Problem: Not able to change Signature Settings Dynamically.
What I want: Need to change the Signature Field Reason code Dynamically upon selecting Radio Button.
Here is My Code:
var mydoc = xfa.resolveNode("FormData.P3_443.signature[2].ePadSignatureField3");
mydoc.signatureSetSeedValue(
reasons: ["Advisor"],
flags: 8
Error Message:
TypeError: mydoc.signatureSetSeedValue is not a function
9:XFA:FormData[0]:P3_443[0]:signature[2]:ePadSignatureField3[0]:validate'
   Source Code: Acrobat Code for Signature.
   // Obtain the signature field object:
var f = this.getField("mySigFieldName");
f.signatureSetSeedValue(
{ reasons: ["This is a reason", "This is a better reason"],
flags: 8

Problem: Not able to change Signature Settings Dynamically.
What I want: Need to change the Signature Field Reason code Dynamically upon selecting Radio Button.
Here is My Code:
var mydoc = xfa.resolveNode("FormData.P3_443.signature[2].ePadSignatureField3");
mydoc.signatureSetSeedValue(
reasons: ["Advisor"],
flags: 8
Error Message:
TypeError: mydoc.signatureSetSeedValue is not a function
9:XFA:FormData[0]:P3_443[0]:signature[2]:ePadSignatureField3[0]:validate'
   Source Code: Acrobat Code for Signature.
   // Obtain the signature field object:
var f = this.getField("mySigFieldName");
f.signatureSetSeedValue(
{ reasons: ["This is a reason", "This is a better reason"],
flags: 8

Input Enabled Query - Web Template - Not able to change the key figure.

Hello IP Gurus,
This is a simple question .
I have input enabled query and for all the KF's , I selected the radio button - data can be changed using user entries or planning functions , Equal Distribution and No disagrregation.
I attached the query to a web template.
When I execute the template I am not able to enter or change the key figures.
Do I have to use any planning function to do that in the web template or I am missing any configuration . Please let me know how to change or enter the key figures
Thanks
Senthil

HI Senthil,
Please ensure that u have enabled the property " start Query in changed Mode". This u can find it in the query properties under the advanced tab.
For the Input readiness this alone is not enough.You have to use all the charecteristics that u have in the multiprovider or the aggregation level over which the query is built.
regards.
Shafi.

Using Windows Server 2012 VL Product key with Windows Server 2012 R2

Hi all,
Trying to use a Server 2012 vl product key to active a Server 2012 R2, but running into issues, namely it is not accepting the key. I have read many threads pointing out that different keys are required, but no mention of the process that one needs
to take in order to obtain/swap product keys? Any ideas appreciated? :)

The product key I have is for Windows Server 2012 Standard VL, (It's not a DC).
I have downloaded the evaluation iso for Windows Server 2012 R2 and want to licence it (with a VL), but it is failing with the Windows Server Standard 2012 VL product key.
My question is - am I doing something wrong, or do I need to ask Microsoft to change the product key / buy a new one? - What steps do I need to take?
The product key for WS2012 will not work for WS2012R2. (so, yeah, you're doing that wrong)
WS2012R2 is not a "free" upgrade from WS2012 (it's different to Win8.0 -> Win8.1)
Your WS2012 pkey will work with WS2012. To use WS2012R2 you need a WS2012R2 pkey.
If you want to "convert" an evaluation license install, into a full licensed install, you must match the version (2012 vs. 2012R2) and the edition, and must use DISM as well as the correct pkey.
http://technet.microsoft.com/en-us/library/jj574204.aspx
If you don't have the correct pkey for WS2012R2 already, and you don't have one waiting for you in the Volume Licensing Service Center website, you'll need to purchase a new license for WS2012R2.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Not able to install studio + controller on windows server 2012 r2

Hi,
i have installed windows server 2012 R2, now i want to install windows HCK 2.1 with controller + studio option but i am not able to install because that option is grey. what additional settings i have to do in order to successfully installation
of WHCK. please guide me.
ankur dubey

Hi, see the
Windows HCK Getting Started.
Note:
Controller isn't supported on Windows Server 2003, Windows Server 2008, Windows Vista®, Windows XP, or Windows 2000.
Controller isn't supported on an installation that has already been set up as a domain controller.
Controller isn't supported in a virtual PC or any third-party Hypervisor environment.
Greetings
Nino
...esistono i motori di ricerca, facci un salto e troverai molte delle risposte che ti darò io.

Product Key for Windows Server 2008 R2 Trial Period

We have downloaded the trial version of Windows Server 2008 R2 from the Microsft web site. We have installed it but we never received the product key for the trial period.
We are still assessing if all our applications can work with Windows Server 2008 R2 and would need the time to assess the product.
How can we obtain such a key?
Thank you

Click Start, and then click Command Prompt.
Type slmgr.vbs -dli, and then press ENTER to check the current status of your evaluation period.
To reset the evaluation period, type slmgr.vbs –rearm, and then press ENTER.
Restart the computer.
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Not able to inistall Sharepoint 2013 on windows server 2012 r2

Hi ,
I am trying to install Sharepoint enterprise 2013 on windows 2012 r2. In very early stage i got issue when i ran prerequisite installer.
As we all know in this case we need to install prerequisite manually. I downloaded all the prerequisite and installed them manually. I have enabled all web and application role. then followed below link and installed all the prerequisite
http://iouchkov.wordpress.com/2013/10/19/how-to-install-sharepoint-2013-on-windows-server-2012-r2/
SQL Server 2008 R2 SP1 Native
Client
Microsoft
WCF Data Services 5.0
Microsoft Information Protection
and Control Client (MSIPC)
Microsoft Sync Framework Runtime
v1.0 SP1 (x64)
Windows
Identity Extensions
Windows
Identity Foundation (KB974405)
Windows
Server AppFabric
CU
1 for AppFabric 1.1 (KB2671763)
All got installed correctly on server validated from control panel then i restarted the server and Ran SharePoint Set up
But still facing issue attached in form of image
Please help me on this.
kirtesh

Hi kirtesh,
According to your description, my understanding is that you got an error when you ran prerequisite installer.
Please make sure the Windows Server Features and Role services are enabled in your SharePoint server.
Start > All Programs > Administrative Tools > Server Manager->Add Roles and Features:
i. Application Server
ii. File Services
iii. Web Server (IIS)
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Not able to change authorization in c-folder for zrole

Hi Experts,
we are implementing two envelope bidding for SRM 7.0,Here For technical Evaluator ,we have to create a saparate workarea in c-folder.The roles assiged to technical Evaluator is SAP_CFX_USER for c-folder.Now while i was creating the workarea for technical evaluator, i t was throwing me the error.Cfolder.NoAuthorization.Owner....To remove this Error i assiged
a authorization object 'ACO_SUPER'..now i was able to create the folder but the problem is..Technical Evaluator is having administration authorization for Public area.
And i am not able to change the authorization..I tries using CFX_ACO_API_ACTIVITIES_SET and by passing 'Read' auth in badi parameter ct_cfx_auth but it is not chaging..
I am totally out of clues what to do?????please suggest..

Hi,
Can I know how you were able to change authorizations for the cFolders?
Ganapathi

Not able to save any projects to PWA server from MSPS client

HI,
We are not able to save any project to PWA server using MSPS client. It says saving (0%). But not getting processed to pwa.
Thanks!
Shamsuddeen

Hi Shamsuddeen,
Have you correctly configure in MSProject the connection to Project Server?
See reference below:
http://office.microsoft.com/en-us/project-help/connect-log-on-to-project-server-HA010373238.aspx
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

Latest Lithroom 5.6 does not recognize my .cr2 raw file format and Windows 7 it asociates with my older raw plug in in Ps CS5.5. I am not able to change default program for .cr2 in the properties pannel...

Latest Lithroom 5.6 does not recognize my .cr2 raw file format and Windows 7 it asociates with my older raw plug in in Ps CS5.5. I am not able to change default program for .cr2 in the properties pannel...
every new released update of Lr from v 5.2 changed somethin in my Windows 7 Professional settings. I am stucked. Can somebody help me please? Many thanks. Andrej

Hi Jim,
yes after I imported my .cr2 raw files into new catalog it started to work. Windows 7 still does not recognize them but I can edit them as you said within the Lr5.6 and then export them into .psd or .dng files...as needed.
I bought Lr5 only because I got present - my new camera Cannon 70D and because my older Photoshop CS5.5 raw plugin does not recognize. cr2 files.
Many thanks for your help.
Andrej.

'System Preferences' gets hanged. Not able to change any settings.

I'm not able to change my wallpaper. Main issue is as soon as I open 'System Preferences', the window opens but I'm not able to click on anything. Not able to change any settings. Tried restarting but no help.
Please help.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Boot in safe mode and log in to the account with the problem. First, disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable, and remove all aftermarket expansion cards. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including your login items.
Launch the application(s) and test. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.)

Сhange the product key for windows on the product key on a Mac OS.

Our family purchased Adobe Photoshop for Windows, and then changed the computer to Apple IMAC, you can change the product key for windows on the product key on a Mac OS. my key for windows had not even been activated.

http://kb2.adobe.com/cps/405/kb405819.html
Mylenium

HT4847 I have a new iphone and cannot delete the backup from icloud. It says that it is in use. I have read some of the other threads and it only seems to be haphazard solutions. Is there a definite way to fix this? I am not able to change icloud accoun

I have a new iphone and cannot delete the backup from icloud. It says that it is in use. I have read some of the other threads and it only seems to be haphazard solutions. Is there a definite way to fix this? I am not able to change icloud accounts.

Follow the steps in wjosten's post here: https://discussions.apple.com/message/13356770#13356770 (for Windows, substitute Outlook in step 2).

Not able to change product key in windows server using SLui command

Similar Messages

Maybe you are looking for