Not able to change status after creating revision

Hi All,
I am not able to change status of the document after creating revision.
Here are the steps I am doing:
Set
- I assign the change number to the document.
- Now, I open the document in cv02n and change the status.
- New revision is created with revision level 01.
Now I want to change the status of the document to the next status according to status network but its not happening. Would you please provide your valuable suggestions.
Regards
Vidit

Hi Vidit,
based on your description I've tested the behaviour on our test system and I would kindly tell you that the behaviour you are facing is the standard. The mentioned error message are raised because, since the Change Order is released, the DIR remains locked and you will not be able to make any changes to the DIR, including the status.If this DIR was not associated to the Change Order(which is released),you could have made changes to the document status.
Please note that status change with 'Change Master Without Release Key' is possible to change the status but with 'Engineering Change Order with Release Key' it's not. I hope this information will help you.
Best regards,
Christoph

Similar Messages

Not able to change SC after partial rejection

Hello,
I am in the process of setting up a Shopping cart approval workflow on SRM 7.0 using process-controlled Workflow.
We have 2 levels in our process schema.
1 level: Approval with completion
2 Level: Approval (Line mangager approves if total value exceeds requestors spending limit)
If a Shopping cart with multiple line items go for approval, and the line manager approves one item and rejects another, the Shopping cart is returned to the requester to either accept the decision or to adjust the shopping cart.
However, when the requestor receives the work item in his inbox, he has no possibility to change the shopping cart.
I have checked the BBP_WFL_SECURITY setting for the requestor: Low (Workflow is always restarted when changes are made)
I have implemented SAP Note 1397705 BBP_WFL_SECUR_BADI: Incorrect security level in default BAdI.
Is there any experts who can advise what to do?
I don't want to copy the existing Shopping cart, just to make some small changes, and then send the new SC for approval and delete the old, source SC.
Best regards
Per T. Olsen

Hi,
reading the note it is clear that in process-controlled workflows it is not possible to change a partially rejected Shopping cart, and have it restart the workflow.
Is there any workaround to have a restart of the workflow when the requestor changes a partially rejected SC???
I mean, it would be great to change a Shopping cart based on the Approvers notes, and then resubmit for approval. This way we can keep track of the approval notes. All we can do now is to copy the Shopping cart into a new one make the changes and then go for approval with the new one, but then we lose the approval note history.
Is tehere anyone out there with a similar problem, who has any ideas or maybe found some workarounds??
Best regards
Per T.

Change material status after creating SO

Hi Guru,
i have created a sales order with material 'DCC001'.
after creating the sales order the STATUS of material 'DCC001' should be 'Sales not allowed'.
but, when i am checking the status of that material, its showing blank in field 'X-distr.chain status' which is in tab 'Sales: sales org. 1'.
Please tell me how can i change the status after creating SO.
Thanks & Regards
Sohel

Please post in correct forum..

Not able to change vendor name while creating a DC under a track in NWDS

Hi all,
I am trying to create a new DC under a track in NWDS.I am not able to change the vendor name .It is showing sap.com and the field is greyed out.Did anybody faced this issue earlier?
Need your inputs.
Thanks and regards,
Rajesh

Hi Rajesh
Please check this thread.
cannot create a new DC
You can create new SC with your name reservation and add to your track.
Hope this will help you.
Thanks
Arun

Not able to change the roles through the ERM after uploading from ECC

Hi
We are not able to do the following activities after uploading the roles into ERM from Backend system
1) We are not able to see any transaction data but we are able to see org values.
2) We are not able to change the roles from ERM.
Vserion and support pack leavel : GRC5.3 and 13
Please help in this.
Thanks in advance.
With Best Regards,
support

How are you trying to do this? using oiddas ?
Can you explain more in detail?
Greetings.

I am not able to change the object after upgrade(SPAU Activity).

HI All,
I am not able to change the object after upgrade(SPAU Activity). Please any one can tell what is the reason with below details.
You are not authorized to make changes
Message no. 37202
Diagnosis
You have no authorization for the authorization object 'S_DEVELOP', which would allow you to change the screen concerned.
There is also a second possibility:
You want to edit a modified SAP screen in a customer system after an upgrate (SAP transport). The screen remains locked for editing until the new SAP version and the customer version have been aligned (Transaction SPAU).
System Response
Authorizations are assigned to users in profiles. Profiles are stored in the user master record.
Procedure
Comsult your system administrator.
Thanks in Advance,
Mahesh Devershetty

Hi,
Does the user who would like to change the screen have the authorisation
for S_DEVELOP in his profile? Please run transaction /NSU53 after the
failed authorisation. You will get an information which authorisation
is missing.
Additional please check if you have open entries in transaction SPAU for
that object.
If you couldn´t solve the issue I need an user to analyse it in your
development system.
That user needs all authorisation for development and has to be
registrated as developer.
The system uses the authorization object S_DEVELOP for Workbench objects
can you please check your user master record whether it contains the
required autorization or not.
Please also ensure that modification adjustment is turned on as per note:
197600 Switching the Modification Assistant off and on
Aidan

Not able to change the size of the Drive

Hello ,
I have a template with 50 GB C drive and I want to a create a VM having 100 GB C drive using this template . But I am not able to change C drive size from the edit settings . After changing the size from the edit settings to 100 Gb , I found that in newly created VM the size of the C drive was 50 Gb.
If it is possible to change the C drive size to 100 Gb without making any changes in template ?
Can anyone suggest me how to do this ?

This question should be posted in a forum area related to a product - are you using vSphere, and if so which version?

Not able to change sales stage from requirtement to reqmt analysis

in opportunity Not able to change sales stage from requirtement to reqmt analysis
Error Message:SBL-DAT-00284
Details error msg is:
Unable to evaluate workflow rule for foll reason
Update probability between 0 & 100%(SBL-ODS-00500)
Edited by: user1074008 on Sep 22, 2010 10:17 PM
Edited by: user1074008 on Sep 22, 2010 10:18 PM

Looks like a bug...
Previos Post Activity Status = Submitted - Access Denied

Not able to generate reports after 8.1.1.3 patch installation

Hi All,
We are not able to generate reports after 8.1.1.3 patch installtion.
and we also followed workaround as below
1) Import the sif files from Siebel\8.1\Tools_1\REPPATCH\12-1VMBCSV.zip
2) Import the 4 SIF files in the following order:
S_XMLP_REP_TMPL_02112010.sif
SBL_XMLP_REPORT_SELECTION_FLG.sif
Report Template BC.sif
Report Template Registration Applet.sif
3)Apply the DDL for table S_XMLP_REP_TMPL and compile repository
Still not able to generate Reports.
Below is error message
Please ask your systems administrator to check your application configuration.
ObjMgrMiscLog Error 1 000000064e150fa0:0 2011-07-07 19:45:31 (busobj.cpp (1654)) SBL-DAT-00222: An error has occurred creating business component 'Report Template Position BC' used by business object 'Report Administration'.
Please ask your systems administrator to check your application configuration.
ObjMgrBusServiceLog Error 1 000000064e150fa0:0 2011-07-07 19:45:31 (swemenusvc.cpp (406)) SBL-DAT-00222: An error has occurred creating business component '<?>' used by business object '<?>'.
Please ask your systems administrator to check your application configuration.
Thanks
Sean

Hi Rajan,
Thankyou for for your reply.
Reports were working fine and we are able to generate reports at configured views in 8.1.1.1 version.
After installing 8.1.1.3 patch, if we click on reports icon below is the error message displayed.
An error has occurred creating business component '<?>' used by business object '<?>'.
Please ask your systems administrator to check your application configuration. (SBL-DAT-00222).
- is it mandatory to configure security model?(in 8.1.1.1 we used default security model)?
-is it necessary to import BIPDataService and BIPSiebelSecurityWS inbound Web Services?
- I didn't see below views as mentioned in bookshelf.
. Reports - Custom Templates
. Reports - Standard Templates?
Thanks
Sean

My iCloud is defaulting to an old Hotmail address that I no longer use, my apple ID is currently functioning fine with a gmail account. I'm not able to change my iCloud email on my phone or on desktop... Any advice?

My iCloud is defaulting to an old Hotmail address that I no longer use, my apple ID is currently functioning fine with a gmail account. I'm not able to change my iCloud email on my phone or on desktop... Any advice?

You would have to change your Apple ID back to your old hotmail address (https://appleid.apple.com ) in order to turn off "Find My iPhone" and change the iCloud ID. After you changed it back and verified your old hotmail address you should be able turn off "Find My iPhone" and to temporarily delete your iCloud account from your devices. After that you can change your Apple ID back to your gmail address again. After it is verfied, you could add back your iCloud account by using your gmail address.

Not able to change the the Contract Line Item Payer

Hi there,
I am not able to change the Contract Line item Payer and giving an error message '' Credit limit customer differs from credit limit customer in header''.
I checked the credit management assignment and the Business partner is assigned with the required Payer.
Request your help.
Thanks,
Renjith

Hi Renjith
So first of all check with which customer you have created Contract. So go to CMR data and check wheather you have maintained multiple Payers or not. If not maintained maintain multiple payers.
As you are getting error '' Credit limit customer differs from credit limit customer in header'' , so check the payer at header level and item level also. the payer at header level and item level should be different.
Regards
Srinath

Not able to change UOM in material master for a material

Hi all ,
I have a issue with changing of the UOM in the material master , IN MMO2 after changing the UOM , in Display error , its showing the error as : The base unit of
                                     The reasons for
                                     Manual reservation
                                     Reserv.No   , Item - No data
                                     Purchase order - 30017056 , Item 1 - 1
There is no stock in the previous as well as current period , and deleted the PR , still i am not able to change
Please help urgently
Thanks in Advance
Neha

Hi Satyajit,
Please look at OSS Note 1069560 - Data inconsistencies: Activating integration. models in parallel, if this helps you.
Since Gross data of material is in the basic view, it is common across plants , whereas, IMs are normally designed to have material masters at plant level.
We may have same material in different IMs with different plants. Therefore changes of the basic view fields are then contained in multiple IMs. SAP advises to have a larger IM or sequential activation of IMs.
I hope this will help you .
Regards
Datta

Buyer not able to change fields of SC in sourcing cockpit in SRM 7.0

Hi
We are on SRM 7.0 , SP 07 . We are in classic mode.
Buyer is not able to change fields of shopping cart in sourcing cockpit like delivery date and quantity . He is able to add supplier and create PO . Even when he creates draft PO , he is not able to edit the fields of shopping cart like delivery date and quantity. Is it a standard Bug , is their any OSS SAP Note for this
Regards
Ashish

As per SAP Standard BUYER can only vendor and Enter price and create a follow on document.
Buyer does not have a control to edit other data.
Buyer wants to they can do it in ME21N ..PO
not in the shopping cart

Latest Lithroom 5.6 does not recognize my .cr2 raw file format and Windows 7 it asociates with my older raw plug in in Ps CS5.5. I am not able to change default program for .cr2 in the properties pannel...

Latest Lithroom 5.6 does not recognize my .cr2 raw file format and Windows 7 it asociates with my older raw plug in in Ps CS5.5. I am not able to change default program for .cr2 in the properties pannel...
every new released update of Lr from v 5.2 changed somethin in my Windows 7 Professional settings. I am stucked. Can somebody help me please? Many thanks. Andrej

Hi Jim,
yes after I imported my .cr2 raw files into new catalog it started to work. Windows 7 still does not recognize them but I can edit them as you said within the Lr5.6 and then export them into .psd or .dng files...as needed.
I bought Lr5 only because I got present - my new camera Cannon 70D and because my older Photoshop CS5.5 raw plugin does not recognize. cr2 files.
Many thanks for your help.
Andrej.

Not able to change authorization in c-folder for zrole

Hi Experts,
we are implementing two envelope bidding for SRM 7.0,Here For technical Evaluator ,we have to create a saparate workarea in c-folder.The roles assiged to technical Evaluator is SAP_CFX_USER for c-folder.Now while i was creating the workarea for technical evaluator, i t was throwing me the error.Cfolder.NoAuthorization.Owner....To remove this Error i assiged
a authorization object 'ACO_SUPER'..now i was able to create the folder but the problem is..Technical Evaluator is having administration authorization for Public area.
And i am not able to change the authorization..I tries using CFX_ACO_API_ACTIVITIES_SET and by passing 'Read' auth in badi parameter ct_cfx_auth but it is not chaging..
I am totally out of clues what to do?????please suggest..

Hi,
Can I know how you were able to change authorizations for the cFolders?
Ganapathi

Not able to change status after creating revision

Similar Messages

Maybe you are looking for