Not able to change the original system of the object

Hello
BW infosource was created in the system Q01 (test) and transported back to D01 (dev).
I would like to change original system from Q01 to D01 to enable object modification.
I am not able to change the original system of the object in the tran se03 as system is disabled.
Original System Q01 (grey)
Any solution for this ?
thanks

hi,
before transporting maintain the settings in the Dev system as follows.
Open tcode RSA1 in dev system, from Menu goto -- tools -- Conversion of Logical system Names.
In this maintain the
Original source system Target source system
Technical name of R/3 client of test Technical name of R/3 client of dev system
This setting has to be maintained while transporting the changes to next system, this ensures that the objects are mapped to the correct source system name on importing and are replicated properly from them.
regards,
Arvind.

Similar Messages

SAP System is not the original system of the object being edited

Hi All,
We recently built a new system which is Copy of another system.We decomission our old system.Now when ABAPer is trying to edit Z/Y programs in se38 they are getting message "SAP System is not the original system of the object being edited".We already completed all post process after system copy.Client is open and status in Golbal modifiable in se06.
How we can resolve this situation.

Hello Guys,
Thks for your input.
@Vinod,
We rebuild new development system from the exsisting devlopment system and scrap old one.And yes thats true that new system is not the original system where object was created,its a replica of old dev to nev dev with SID change.
@Arjun,
I already check TADIR table and and its pointing to new SID.
@Ashok,
As i said earlier,post intallation is already completed.
Its a problem for developer who's getting some different format of screen when they editing development object ,like, when we perform manaul corretion in abap code through snote.They can see buttons to insert code line,delete line.
Thx,Nilesh

How to change to original system of an object

We have moved some sources from one system to another and now the
original system in the customers objects is obviously the old system.
How can I change the original system in these objects? Can anyone tell me
in which tables is this info kept and if there are any standard reports to do this?
Thanks
Martin

Thanks for your answer. No, we did not make a copy, but we have included
all objects in transports, which we imported into the new system.
SE06 sets general system setting. We need to change the information for single objects. Only those customer objects which carry the old system as original system need to be set to the new system. Not the SAP-Objects, obviously. I am talking about Z-Reports, subtypes of business objects, Z-Tables etc.
Bye bye
Martin

How to change the original system of a CR?

Dear gurus,
we have imported some workbench and customizing CRs into a system B mannually from system A,
there is no transport link between A and B.
But when we want to import those CRs into system C , which has transportation link with B, we can not found those CRs, i guess because those CRs is release on A ,not B.
Could you please help me how to import those CRs into system C, just like other 'normal' CRs?
do i need to modify the original system of the CRs? if so , could you pls tell me how to do that?
thanks and best regards.
Jun

Hi Nicole,
there are many system objects inside our CR, DDIC, FM ...
so we can not change them one by one.
what we are trying to do is to port a custom solution from one system to another,there is no link between them , and in the target system, those CRs can be transport to other systems normally using STMS.
we are trying to include those crs into a new cr in the target system , but failed.
could you please provide more informaiton on how to solve this?
thanks and best regards.
jun

Not able to change the size of the Drive

Hello ,
I have a template with 50 GB C drive and I want to a create a VM having 100 GB C drive using this template . But I am not able to change C drive size from the edit settings . After changing the size from the edit settings to 100 Gb , I found that in newly created VM the size of the C drive was 50 Gb.
If it is possible to change the C drive size to 100 Gb without making any changes in template ?
Can anyone suggest me how to do this ?

This question should be posted in a forum area related to a product - are you using vSphere, and if so which version?

I am not able to change my icloud password

i am not able to change my icloud password as the two questions its asking i frgot the ans f dem and now dey are sending the email on my hotmail account which i dont use,

How to reset your Apple ID security questions.
Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
Log in with your Apple ID and password. (If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email)
Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'. This will generate an automated e-mail that will allow you to reset your security questions.
If that doesn't work, or there is no rescue email link available, then click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.
Next, go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.

There was start up glitch on desktop, which changed the computers configuration, which requires activation on Adobe Photoshop CS, but am not able to get throug activation system and phone support has been disconnected.

here was start up glitch on desktop, which changed the computers configuration, which requires activation on Adobe Photoshop CS, but am not able to get throug activation system and phone support has been disconnected. How should I activate my software.

You are entitled to the CS2 version that will work without activation, since the activation servers were taken offline. Read the instructions and follow them on this page.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

Hierarchy R3PRODHIER may only be changed in the original system

Hi Experts
I have created a new Product Hierarchy in R/3 when i try to replicated them into CRM by using initial replication of DNL_CUST_PROD1.system throwing an error saying : Hierarchy R3PRODHIER may only be changed in the original system R3LNT200. ....in the SMQ2 before doing initial replication of DNL_CUST_PROD1 status was green.
And again i try to replicated the DNL_CUST_PROD1 by reguest load which has run successfully and 3 blocks are generated then i run the initial replication of Material but status of initial replication status in waiting. which is not run i mean to say.
then i again created a Request load for Object Material and which is run success fully
but my problem is i did not see the new hierarchy and products too in Table COMM_PRODUCT
.and when i see status of the in DNL_CUST_PROD1in R3am1. which is in ABORT .
Hence i request you could you please help me inorder to make green status of the DNL_CUST_PROD1 in r3am1 so that i can able to nun material successfully
i would appreciate you help
thanking you
Regards
Swathi

Hi Swathi,
I'm assuming this development is copied from your production.
For example: Go to COMM_PRODUCT table and check the log sys field. Now it will show the Production Logical System. So you need to convert this value.
After the client copy, basis needs to execute BDLS transaction. This transaction is used to convert the logical systems in all the Database Tables.
     Perform this conversion only for Client Dependent Tables.
     Execute below conversion in CRM Development Box
                   CRMOLDLOGICAL SYSTEM to CRMNEWLOGICALSYSTEM
                   ECCOLDLOGICALSYSTEM to ECCNEWLOGICALSYSTEM
      In ECC Development Box
                   CRMOLDLOGICAL SYSTEM to CRMNEWLOGICALSYSTEM
                   ECCOLDLOGICALSYSTEM to ECCNEWLOGICALSYSTEM
Regards,
Bhanu

The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, cont

I have a user on an iMac 10.6 connected to our domain. She uses Outlook web access for email on our exchange server. Last week she received the following message which is randomly preventing her from sending emails. She claims no attachment was involved in the original email when this all started. I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue. I realize this may not be Mac related but thought I'd give it a try. She did say it occurred once over two days while working on a PC but it continued over the past weekend.
If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

Not able to change the roles through the ERM after uploading from ECC

Hi
We are not able to do the following activities after uploading the roles into ERM from Backend system
1) We are not able to see any transaction data but we are able to see org values.
2) We are not able to change the roles from ERM.
Vserion and support pack leavel : GRC5.3 and 13
Please help in this.
Thanks in advance.
With Best Regards,
support

How are you trying to do this? using oiddas ?
Can you explain more in detail?
Greetings.

'System Preferences' gets hanged. Not able to change any settings.

I'm not able to change my wallpaper. Main issue is as soon as I open 'System Preferences', the window opens but I'm not able to click on anything. Not able to change any settings. Tried restarting but no help.
Please help.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Boot in safe mode and log in to the account with the problem. First, disconnect all wired peripherals except keyboard, mouse, and monitor, if applicable, and remove all aftermarket expansion cards. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including your login items.
Launch the application(s) and test. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.)

Not able to change the password using FNDCPASS

I am not able to change password using FNDCPASS. I am getting follwoing error while executing following command with APPLMGR user ( before that I have source the .env file ) (OS-Linux)
[applmgr@ora11 /]$ FNDCPASS apps/apps 0 Y system/manager SYSTEM APPLSYS WELCOME
Log filename : L2741743.log
Report filename : O2741743.out
APP-FND-01630: Cannot open file L2741743.log for appending
Cause: FDPFOP encountered an error when attempting to open file L2741743.log for appending.
Action: Verify that the filename is correct and that the environment variables controlling that filename are correct.
Action: If the file is opened in read mode, check that the file exists. Check that you have privileges to read the file in the file directory. Contact your system administrator to obtain read privileges.
Action: If the file is opened in write or append mode, check that you have privileges to create and write files in the file directory. Contact your system administrator to obtain create and write privileges.
Can some one pls guide me on this

Duplicate post-
Not able to change the password using FNDCPASS
Please post only once.
Thanks,

I am not able to change the object after upgrade(SPAU Activity).

HI All,
I am not able to change the object after upgrade(SPAU Activity). Please any one can tell what is the reason with below details.
You are not authorized to make changes
Message no. 37202
Diagnosis
You have no authorization for the authorization object 'S_DEVELOP', which would allow you to change the screen concerned.
There is also a second possibility:
You want to edit a modified SAP screen in a customer system after an upgrate (SAP transport). The screen remains locked for editing until the new SAP version and the customer version have been aligned (Transaction SPAU).
System Response
Authorizations are assigned to users in profiles. Profiles are stored in the user master record.
Procedure
Comsult your system administrator.
Thanks in Advance,
Mahesh Devershetty

Hi,
Does the user who would like to change the screen have the authorisation
for S_DEVELOP in his profile? Please run transaction /NSU53 after the
failed authorisation. You will get an information which authorisation
is missing.
Additional please check if you have open entries in transaction SPAU for
that object.
If you couldn´t solve the issue I need an user to analyse it in your
development system.
That user needs all authorisation for development and has to be
registrated as developer.
The system uses the authorization object S_DEVELOP for Workbench objects
can you please check your user master record whether it contains the
required autorization or not.
Please also ensure that modification adjustment is turned on as per note:
197600 Switching the Modification Assistant off and on
Aidan

HT4847 I have a new iphone and cannot delete the backup from icloud. It says that it is in use. I have read some of the other threads and it only seems to be haphazard solutions. Is there a definite way to fix this? I am not able to change icloud accoun

I have a new iphone and cannot delete the backup from icloud. It says that it is in use. I have read some of the other threads and it only seems to be haphazard solutions. Is there a definite way to fix this? I am not able to change icloud accounts.

Follow the steps in wjosten's post here: https://discussions.apple.com/message/13356770#13356770 (for Windows, substitute Outlook in step 2).

How do I change the country for my iTunes account? I had purchased some itunes gift cards and i have about .75USD left in it. I am not able to change the country because i have to clear the account balance. there is any way I could spend that money???

I would like to change my country from US to Thailand in the iTunes Account. I purchased some iTunes gift card to purchase some apps and since ever i was not able to change my account balance to 0.00USD which is needed in case I want to change my account country. I appreciate if some body can help with this

1) Buy something 75c or greater and charge the balance to a credit card.
or
2) Contact Apple and ask them to keep the 75c
iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store

Not able to change the original system of the object

Similar Messages

Maybe you are looking for