Not able to change the value in 'sold to party' once disabled.

Hi,
I am validating the Business partner entered in the 'sold to party' field while creating a sales order in webclient UI.
The error message pop up as expected but the field becomes disabled. I tried changing the field to editable by setting  rv_disabled = 'FALSE' in method GET_I_SOLDTO_NAME.
Now the field is editable but it does not take the new value which i enter. it takes the old value only.
How do i make the field to accept new values?
Thanks in advance.
Regards
Shanthi.

Hi Shanthi,
Just check small config in your Partner determination profile if it helps you:
Path: SPRO->CRM->Partner Processing->Define Partner Determination Procedure-
Open you Partner determination Profile and go in details Sold-to-party partner and Mark Check box Changable to allow to make changes in partner.
Regards,
Dipesh.

Similar Messages

  • Not able to change exportfolders value in MBeans for FRConfig.cmd for Hyperion Financial reporting 11.1.2 version.

    I am not able to change exportfolders value in MBeans for FRConfig.cmd for Hyperion 11.1.2 Financial reporting .
    When I enter the value , it just vanishes. Am I missing something here.?
    I need to set export path for PDF generation in Hyperion financial report for batches.

    Edit FRConfig.cmd and update
    set EPM_ORACLE_INSTANCE=%MIDDLEWARE_HOME%\user_projects\epmsystem1
    update epmsystem1 to the correct epm instance name
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Not able to change the roles through  the ERM after uploading from ECC

    Hi
    We are not able to do the following activities after uploading the roles into ERM from Backend system
    1) We are not able to see any transaction data but we are able to see org values.
    2) We are not able to change the roles from ERM.
    Vserion and support pack leavel : GRC5.3 and 13
    Please help in this.
    Thanks in advance.
    With Best Regards,
    support

    How are you trying to do this? using oiddas ?
    Can you explain more in detail?
    Greetings.

  • Not able to edit the value options in LKM

    Hi
    I have recently upgraded to ODI 11g .
    In that we are not able to edit the value options in LKM.
    (i.e.. editor window is not appearing, not able to edit the text.
    Please let me know the solution .
    Thanks

    We were using JDK1.6.0_29 and it was not supporting ODI 11.1.1.5, so we have uninstalled the JDK1.6.0_29 and reinstall the JDK1.6.0_11.This solves our issue.
    Thanks a lot!!

  • My past billing adress of my apple ID is the states, presently i'm in montreal Canada and im not able to change the billing address because my balance is $ 0.68, any idea how can i change it?

    my past billing adress of my apple ID is the states, presently i'm in montreal Canada and im not able to change the billing address because my balance is $ 0.68, any idea how can i change it?

    You can contact iTunes support and request that they remove the $0.68 from your account here:
    http://www.apple.com/support/itunes/contact/
    They should respond within 24 hours.

  • Not able to change the the Contract Line Item Payer

    Hi there,
    I am not able to change the Contract Line item Payer and giving an error message '' Credit limit customer differs from credit limit customer in header''.
    I checked the credit management assignment and the Business partner is assigned with the required Payer.
    Request your help.
    Thanks,
    Renjith

    Hi Renjith
    So first of all  check with which customer you have created Contract. So go to CMR data and check wheather you have maintained multiple Payers or not. If not maintained maintain multiple payers.
    As you are getting error  '' Credit limit customer differs from credit limit customer in header'' , so check the payer at header level and item level also. the payer at header level and item level should be different.
    Regards
    Srinath

  • Not able to change the Valuation class of a Material

    Hi Team,
    I am not able to change the Valuation class of a Material even if the stock is zero.
    Please assist.
    Thanks in advance.
    Chetan

    Hi Chetan,
    Please check if any open PO for this Material exist, if it is there, delete it and try to change VC.
    Thanks,
    Ninad

  • Not able to change the price of PO

    Hi All,
    I am not able to edit the price on PO.
    Materail is free text catalog orders from SRM, I am not able to change the price.
    Could you please help me in changing the price.
    Is there any other steps i need to do to change the price.
    Thanks

    Hi there,
    Is it greyed out or do you get an error?
    Are there any follow-on documents?
    Regards,
    Matthew

  • I am Using Apple iPhone 4g 32gb and i have Updated to iOS 6.0 but in Maps i am not able to change the angle with two finger why so ?

    I am Using Apple iPhone 4g 32gb and i have Updated to iOS 6.0 but in Maps i am not able to change the angle with two finger why so ? I have also restored it but not getting

    I have an iPhone 4 also.  If you are referring to the flyover view, its unavailble for the iPhone4.  If you want to rotate the map, hold two fingers on the map for 2-3 seconds and rotate them in opposite directions.
    Hope this helps

  • Not able to change the original system of the object

    Hello
    BW infosource was created in the system Q01 (test) and transported back to D01 (dev).
    I would like to change original system from Q01 to D01 to enable object modification.
    I am not able to change the original system of the object in the tran se03 as  system is disabled.
    Original System          Q01   (grey)
    Any solution for this ?
    thanks

    hi,
    before transporting maintain the settings in the Dev system as follows.
    Open tcode RSA1 in dev system, from Menu goto -- tools -- Conversion of Logical system Names.
    In this maintain the
    Original source system                                   Target source system
    Technical name of R/3 client of test              Technical name of R/3 client of dev system
    This setting has to be maintained while transporting the changes to next system, this ensures that the objects are mapped to the correct source system name on importing and are replicated properly from them.
    regards,
    Arvind.

  • Printing issues i'm not able to change the print order it always prints back to front.

    I have an HP Pavilion  model p6112p. Operating System is Vista Home Premium 64-bit, with an HP Deskjet Printer Model 6980.
    The issue is I am unable to change the printing order of multiple page printing, they print from back to front on everything that I print, even my Quicken Checks, print back to front. I am unable to resolve this issue. HELP!!!! 

    I changed the code a bit. I removed the graph and replaced it by a value, the same error occured.
    How to reproduce:
    1) Exit LabVIEW completely (VERY IMPORTANT)
    2) Open and run the attached VI
    3) change the value of the 'value'-control to eg. 2.2 by typing in the value.
    4) press on the print button
    5) try to change the value of the 'value'-control to eg. 5.0 by typing in the value. This is NOT possible.
    Changing the value with the arrows is possible.
    6) stop the VI.
    7) restart and no problem will occure.
    8) Completely exit LV, restart the VI (and LV), the same error appears again after having printing the front panel.
    I notice this only with LV 6.0.2. With LV 6.1 it seems to work fine.
    Attachments:
    PRINTfp.vi ‏28 KB

  • I am not able to change the ip adress with the change of network...e.g i am using a different network in office and home bt my office inter ip adress is showing at my home network....user id are different and d ip adress is not changing

    i am not able to change the ip adress as i have changed the network...my old ip adress is been shown....i cant edit it n change it

    Manually input your SSID and Password
    Settings>Wi-Fi>Other...>Other Network
    http://i1224.photobucket.com/albums/ee374/Diavonex/d83f974f.jpg

  • Not able to change the password using FNDCPASS

    I am not able to change password using FNDCPASS. I am getting follwoing error while executing following command with APPLMGR user ( before that I have source the .env file ) (OS-Linux)
    [applmgr@ora11 /]$ FNDCPASS apps/apps 0 Y system/manager SYSTEM APPLSYS WELCOME
    Log filename : L2741743.log
    Report filename : O2741743.out
    APP-FND-01630: Cannot open file L2741743.log for appending
    Cause: FDPFOP encountered an error when attempting to open file L2741743.log for appending.
    Action: Verify that the filename is correct and that the environment variables controlling that filename are correct.
    Action: If the file is opened in read mode, check that the file exists. Check that you have privileges to read the file in the file directory. Contact your system administrator to obtain read privileges.
    Action: If the file is opened in write or append mode, check that you have privileges to create and write files in the file directory. Contact your system administrator to obtain create and write privileges.
    Can some one pls guide me on this

    Duplicate post-
    Not able to change the password using FNDCPASS
    Please post only once.
    Thanks,

  • I am not able to change the object after upgrade(SPAU Activity).

    HI All,
    I am not able to change the object after upgrade(SPAU Activity). Please any one can tell what is the reason with below details.
    You are not authorized to make changes
    Message no. 37202
    Diagnosis
    You have no authorization for the authorization object 'S_DEVELOP', which would allow you to change the screen concerned.
    There is also a second possibility:
    You want to edit a modified SAP screen in a customer system after an upgrate (SAP transport). The screen remains locked for editing until the new SAP version and the customer version have been aligned (Transaction SPAU).
    System Response
    Authorizations are assigned to users in profiles. Profiles are stored in the user master record.
    Procedure
    Comsult your system administrator.
    Thanks in Advance,
    Mahesh Devershetty

    Hi,
    Does the user who would like to change the screen have the authorisation
    for S_DEVELOP in his profile? Please run transaction /NSU53 after the
    failed authorisation. You will get an information which authorisation
    is missing.
    Additional please check if you have open entries in transaction SPAU for
    that object.
    If you couldn´t solve the issue I need an user to analyse it in your
    development system.
    That user needs all authorisation for development and has to be
    registrated as developer.
    The system uses the authorization object S_DEVELOP for Workbench objects
    can you please check your user master record whether it contains the
    required autorization or not.
    Please also ensure that modification adjustment is turned on as per note:
    197600  Switching the Modification Assistant off and on
    Aidan

  • Hi All,  I am not able to change the email address to update my secret question and answer.  Instead it directs the email to my work address where I cannot access now.  Thoughts?

    Hi All,  I am not able to change the email address to update my secret question and answer.  Instead it directs the email to my work address where I cannot access now.  Thoughts?

    Call Apple Care and ask for the Account Security Team. They can assist you with your issue.

Maybe you are looking for

  • How to debug when you can't recreate error consistently

    I have a simple illustrator-type application in which I draw rounded rectangles to a JPanel and then the user is able to move them around (the position and repaint is done in via the mouseDragged interface. Sometimes, the application shuts down when

  • Battety problems - blank screen wit battery sign with red line

    I have the blackberry 8900 curve. Recently when I put my phone on charge it would turn my BB off and turn it self back on again. My battery was about 2% and I put it on charge and the phone turned off but when I looked at my phone the red light came

  • Suppress error message in fm READ_TEXT

    Hi I have a smartform in which i am trying to display some longtext.My problem is that i have to draw some extra lines when the longtext does not exist.I tried to verify if the longtext exists using the fm READ_TEXT(and set a flag if exists or not ),

  • Why are albums still not sorted alphabetically?

    iPhoto 11, v. 9.4.2 Hello all, I am running Lion Server and I share the server's iPhoto Library (source lib) on the local LAN. When other Macs access the iPhoto Library the albums that are alphabetically sorted on the server are displayed randomly on

  • Incorrect email address for user name

    My wife bought her own ipad mini yesterday.,unfortunately the user name had an incorrect email address We have as yet been unable to change this We are able to use safari but unable to create email account or iCloud account therefore not able to purc