Not able to change variant data

i am changing selection screen date range and clicking on save and it is asking for overwriting and got message like variant saved , but when i come back and checked dates remains same.
please help here.

Hi,
check in the variant attribute page to see if this check box "Save Parameter without Values" is checked for the date fields. If this is checked then,values you change in the screen will not be saved. You need to either uncheck this box or reconfigure your dynamic variant so that it will change to the dates you want to see there.
Thanks & regards.

Similar Messages

Not able to change the data of test data containers in production system

Dear All,
We have created eCATT scripts in Development SolMan System and moved the transports to Production SolMan System. Customer wants to change the data at Test data containers and run the scripts in production system but we are not able to edit the data.
May be the reason is SCC4 transaction code has set the below option.
Changes and transports for client-specific Objects
u2022 No changes allowed
Customer doesnu2019t want to change the above option and wanted to change the test data containers to give different datau2019s and run the eCATT scripts.
Could you please let me know the solution for this?
Your help is really appreciated.
Thanks,
Mahendra

eCatt has the feature where you don't need to transport the scripts or test configuration to our target system. We can keep all our scripts and test data in Solman and run this script any other system in your landscape using the System data container and target system.
Maintain the production as one of the target system in System container in Solman and point that system while running the script. Change the test data in Solman to run this script.
Let me know if you need more information
thanks
Venkat

HT5252 I tried to change my metadata date and got this Aperture was not able to adjust the date and time of the original file "01769_p_h13ajyrm4bm0944.jpg" because it is locked or you do not have permission to modify it.

I tried to change the metadata date. It changed the date on my photo, but when I checked the box that said "also change my original file", it gave me this error message.
Unable to change original file. Aperture was not able to adjust the date and time of the original file “01769_p_h13ajyrm4bm0944.jpg” because it is locked or you do not have permission to modify it.
Wassup?

What is your Aperture version? The older versions of Aperture 3 had a problem to apply Metadata changes to the original file.
If you are using the current version Aperture 3.4.5, try to repair the permissions on your Aperture library, if you have not already done so:
Launch Aperture with the key combination ⌥⌘ held down and select "Repair Permissions" from the First Aid PAnel, that will appear.
If that does not help, post back with more information on your original files - are the referenced or managed? Where is your Aperture library located? Since when do you have this problem? And what did you do directly before noticed the problem for the first time?
Regards
Léonie

Not able to extract performance data from .ETL file using xperf commands. getting error "Events were lost in this trace. Data may be unreliable ..."

Not able to extract performance data from .ETL file using xperf commands.
Xperf Commands:
xperf –i C:\TempFolder\Test.etl -o C:\TempFolder\BootData.csv –a process
Getting following error after executing above command:
"33288636 Events were lost
in this trace.
Data may be unreliable
This is usually caused
by insufficient disk bandwidth for ETW lo
gging.
Please try increasing the minimum
and maximum number of buffers
and/or
the buffer size.
Doubling these values would be a good first at
tempt.
Please note, though, that
this action increases the amount of me
mory
reserved
for ETW buffers, increasing memory pressure on your sce
nario.
See "xperf -help start"
for the associated command line options."
I changed page size file but its does not work for me.
Any one have idea, how to solve this problem and extract ETL file data.

I want to mention one point here. I have total 4 machines out of these 3 machines above
commands working properly. Only one machine has this problem.<o:p></o:p>
Hi,
I consider that you can try to use xperf to collect the trace etl file and see if it can be extracted on this computer:
Refer to following articles:
start
http://msdn.microsoft.com/en-us/library/windows/hardware/hh162977.aspx
Using Xperf to take a Trace (updated)
http://blogs.msdn.com/b/pigscanfly/archive/2008/02/16/using-xperf-to-take-a-trace.aspx
Kate Li
TechNet Community Support

Not able to change sales stage from requirtement to reqmt analysis

in opportunity Not able to change sales stage from requirtement to reqmt analysis
Error Message:SBL-DAT-00284
Details error msg is:
Unable to evaluate workflow rule for foll reason
Update probability between 0 & 100%(SBL-ODS-00500)
Edited by: user1074008 on Sep 22, 2010 10:17 PM
Edited by: user1074008 on Sep 22, 2010 10:18 PM

Looks like a bug...
Previos Post Activity Status = Submitted - Access Denied

Not able to change the the Contract Line Item Payer

Hi there,
I am not able to change the Contract Line item Payer and giving an error message '' Credit limit customer differs from credit limit customer in header''.
I checked the credit management assignment and the Business partner is assigned with the required Payer.
Request your help.
Thanks,
Renjith

Hi Renjith
So first of all check with which customer you have created Contract. So go to CMR data and check wheather you have maintained multiple Payers or not. If not maintained maintain multiple payers.
As you are getting error '' Credit limit customer differs from credit limit customer in header'' , so check the payer at header level and item level also. the payer at header level and item level should be different.
Regards
Srinath

Not able to change UOM in material master for a material

Hi all ,
I have a issue with changing of the UOM in the material master , IN MMO2 after changing the UOM , in Display error , its showing the error as : The base unit of
                                     The reasons for
                                     Manual reservation
                                     Reserv.No   , Item - No data
                                     Purchase order - 30017056 , Item 1 - 1
There is no stock in the previous as well as current period , and deleted the PR , still i am not able to change
Please help urgently
Thanks in Advance
Neha

Hi Satyajit,
Please look at OSS Note 1069560 - Data inconsistencies: Activating integration. models in parallel, if this helps you.
Since Gross data of material is in the basic view, it is common across plants , whereas, IMs are normally designed to have material masters at plant level.
We may have same material in different IMs with different plants. Therefore changes of the basic view fields are then contained in multiple IMs. SAP advises to have a larger IM or sequential activation of IMs.
I hope this will help you .
Regards
Datta

Buyer not able to change fields of SC in sourcing cockpit in SRM 7.0

Hi
We are on SRM 7.0 , SP 07 . We are in classic mode.
Buyer is not able to change fields of shopping cart in sourcing cockpit like delivery date and quantity . He is able to add supplier and create PO . Even when he creates draft PO , he is not able to edit the fields of shopping cart like delivery date and quantity. Is it a standard Bug , is their any OSS SAP Note for this
Regards
Ashish

As per SAP Standard BUYER can only vendor and Enter price and create a follow on document.
Buyer does not have a control to edit other data.
Buyer wants to they can do it in ME21N ..PO
not in the shopping cart

Not able to change the roles through the ERM after uploading from ECC

Hi
We are not able to do the following activities after uploading the roles into ERM from Backend system
1) We are not able to see any transaction data but we are able to see org values.
2) We are not able to change the roles from ERM.
Vserion and support pack leavel : GRC5.3 and 13
Please help in this.
Thanks in advance.
With Best Regards,
support

How are you trying to do this? using oiddas ?
Can you explain more in detail?
Greetings.

I am not able to see the data By request id in ODS

HI Gurus,
I am trying to do data loads from flatflies based on Region to ODS(We have flat files based on region for each region we have one flatfile) .I have loaded 2 files into ods.But when i am checking the data in ODS by request id .I am seeind 2 regions data on one request id .I am not able to see the data for other request id.
For example:
We have two flat files one is region 1: 5100 and region 2: 5030
Request id 1: contains region 5100 data
request id 2 : contains region 5030 data.
But when i am checking the data in ODS its showing 5100&5030 data onn request id 1.I am not seeing any data for requestid 2.
Please help me out.

Hi,
Active data cant be seen by Request id but definitely change log table contains request id and list of records per request
Go to Manage ---> Contents tab --> New Data. Over here you can enter the request number and check the data request wise.....The same can be done for Change log
Check the log in SM37 if it exists there or not.
May be the number of records will be more and depending upon the system processses it will be taking time to load.ID request is loaded to ODS then it could be activation time
Hareesh

Not able to change excise tyep while doing J1IIN for export

Hi
We are creating export excise invoice via J1IIN. But I am not able to change excise type to Bond Or Deemed as the pencil tab is grayed out.
Its by default coming to deemed as I have maintained the settings in u201Cdefault settings for excise gp and series gpu201D as
1000 20 11 1000 P1 S1u2026u2026u2026deemed.
We are using only one excise gp P1 and series gp S1. We have scenarios of export under bond and deemed export.
Please let me know what can be the problem. The strange thing is that it was working fine previously with these settings and we were able to change the excise type. But now it has grayed out. Also I am getting a meesage while J1IIN u201CNo add. Vendor / Customer data maint. for TMK911 -Please maintain J_1IMOVENDu201D
I have cheked the customer master and exice indicator is maintained as u201C1u201D in CIN tab.
Thanks

HI
For your Message says that maintain the Vendor Excise Details (J_1IMOCUST - Customer , J_1IMOVEND - Vendor)
Please check any vendor data is required to maintain
I am not sure check once if you assign any vendor in customer master , check those details in vendor excise (J1ID)
Regards,
Prasanna

Query Planning enabled - but not able to enter the data

Hi,
Created a query which is planning enabled (Check box ticked on Planning Tab in query designer - Start query in change mode checked).
After execution of the query, if I try to input some plan data, the query is in display mode only. I am not able to input any data.
Can you please tell me where is going wrong.
Regards,
Ravi

Hi Ravi,
First of all an input enabled query can only be created on aggregation level.
As far as your issue is concerned, it seems that your query might not be having
the required restrictions for the characteristics or are not drilled down.
Please note that characterictics defined in rows are automatically restricted to a single value , but the same is not the case with the 'Free Characteristic' in the query.
Please check the restrictions you have made in your query.
Regards,
Amit

Not able to see the data in the report

Hi All
      In my cube i am having data.But when i am running the report ,i am not able to see the data.
    The error its throwing is -No Applicable data found.
    what could be the problem,please provide me the idea to solve the problem.
Thanks&regards
syam prasad dasari

HI,
See that any restrictions are there in the report(Filters)....Give the same restrictions in Listcube and see if you are getting data or not.....
Thanks

Not able to get the data in COSB Table

Hi Colleagues,
I have created a Project and assign the WBS number to a Sales order and also have done all the settings in Result Analysis.
But still not able to get the data in COSB table.
Could you please suggest me the steps and process, Might be i have missed something..
Thanks in Advance
Regards
Nitin

Hi Ken,
I have below mentioned requirement
COSB will show value by object number and need to pass the object number to PRPS table to find the corresponding WBS element and then pass the WBS element to VBAP table to find the corresponding SO line item.
Please let me know as Functional prospect what I have to do to bring this values in COSB table.
Regards
Nitin

Not able to fetch the data by Virtual Cube

Hi Experts,
My requirement is I need to fetch the data from Source System (From Data base table) by using Virtual Cube.
What I have done is I have created Virtual Cube and created corresponding Function Module in Source System.
That Function MOdule is working fine, if Data base table is small in Source System.But If data base table contains huge amount of data (millions of record), I am not able to fetch the data.
Below is the code I have incorporated in my function module.
c_th_mapping TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_TH_IOBJ_FLD_MAPPING.
DATA:
    l_s_map TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_S_IOBJ_FLD_MAPPING.
l_s_map-iobjnm = '0PARTNER'.
l_s_map-fldnm = 'PARTNER'.
insert l_s_map into table l_th_mapping.
create object l_r_srv
    exporting
       i_tablnm              = '/SAPSLL/V_BLBP'
      i_th_iobj_fld_mapping = l_th_mapping.
l_r_srv->open_cursor(
    i_t_characteristics = characteristics[]
    i_t_keyfigures      = keyfigures[]
    i_t_selection       = selection[] ).
   l_r_srv->fetch_pack_data(
    importing
      e_t_data = data[] ).
return-type = 'S'.
In the above function Module,Internal table L_TH_MAPPING contains Info Objects from Virtual Cube and corresponding field from Underlying data base table.
The problem where I am facing is, in the method FETCH_PACK_DATA, initially program is trying to fetch all the recordsfrom data base table to internal table.If Data base table so lagre, this logic is not working.
So would you please help me how to handle these kind of issues.

Hi Experts,
My requirement is I need to fetch the data from Source System (From Data base table) by using Virtual Cube.
What I have done is I have created Virtual Cube and created corresponding Function Module in Source System.
That Function MOdule is working fine, if Data base table is small in Source System.But If data base table contains huge amount of data (millions of record), I am not able to fetch the data.
Below is the code I have incorporated in my function module.
c_th_mapping TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_TH_IOBJ_FLD_MAPPING.
DATA:
    l_s_map TYPE CL_RSDRV_EXTERNAL_IPROV_SRV=>TN_S_IOBJ_FLD_MAPPING.
l_s_map-iobjnm = '0PARTNER'.
l_s_map-fldnm = 'PARTNER'.
insert l_s_map into table l_th_mapping.
create object l_r_srv
    exporting
       i_tablnm              = '/SAPSLL/V_BLBP'
      i_th_iobj_fld_mapping = l_th_mapping.
l_r_srv->open_cursor(
    i_t_characteristics = characteristics[]
    i_t_keyfigures      = keyfigures[]
    i_t_selection       = selection[] ).
   l_r_srv->fetch_pack_data(
    importing
      e_t_data = data[] ).
return-type = 'S'.
In the above function Module,Internal table L_TH_MAPPING contains Info Objects from Virtual Cube and corresponding field from Underlying data base table.
The problem where I am facing is, in the method FETCH_PACK_DATA, initially program is trying to fetch all the recordsfrom data base table to internal table.If Data base table so lagre, this logic is not working.
So would you please help me how to handle these kind of issues.

Not able to change variant data

Similar Messages

Maybe you are looking for