Not able to check the GR invoice in MIGO

Hi Folks,
when i am checking the GR invoice in MIGO i am getting the following error,
"Account Determination for entry 2008 BSX _______ _________ 3000 not possible". Here 2008 is the Chart of accounts/Company Code.
Kindly do the needful.
Thanks in advance
with warm wishes,

HI,
GOTO T-code OBYC and select BSX and enter valuation class 3000 and Inventory GL account.
And also Check in Material master in t-code MM02 , Whether u have maintain valuation class 3000 in Accounting1 view or not.
Regards,
Sreekanth

Similar Messages

Not able to park the logistics invoice in mir7

Hi Gurus,
My client is not able to park the invoice( Freight invoices).
It is giving the message '1000000578' not found in the item list.
Some shipments which are not cleared for payment is supposed to be parked. However the shipment reference documents not available in SAP for payment processing.
Please suggest me.
Regards,
Prasad.

Hi Gurus,
I checked in ML81N Display Entry sheet also.
Everything is ok.
Regards,
Prasad

Not able to cancel the Excise invoice for STO process

Hi All,
In STO process, we need to cancel the excise invoice due to some business requirement. When we tried to do the same in J1IH, it is not allowing us to do the same with the error "No item information transferred into Accounting". Tried the same through J1IS with the internal Doc No. Here the error is document is complete.
Please guide how to cancel the same.

Hi,
STO has been created either through MM route or through SD-MM route.
In MM route, the process is as below,
You create PO, followed by MB1B (Transfer posting) , then followed by J1IS (Excise Invoice).
In SD-MM route the process is as below,
You create PO, followed by VL10B , then VF01, then followed by J1IIN (Excise Invoice from Factory).
Normally, when you create Excise Invoice through J1IIN, it is automatically released to Accounting.
In your case, I feel it has not yet been released to accounting and I hope, Excise Invoice has been created through J1IS.
In MM route, you need to release the Excise doc to Accounting.
In that case, you need to go for J1IV and release the same to accounting.
Find out the Internal document number from the Excise Invoice and with the reference of this Internal document number release it to Accounting through t.code J1IV.
Now, once it is released to accounting, you should be able to cancel it through J1IH or J1IS.
Please let me know if any further problem you are facing.
Regards
Pradyumna

Not able to get the PERNR Details in the LOG overview

Hi,
I have uploaded the data into info types 0000 and 0001 through PA30 transaction using LSMW,Recorging,Batch input method.
once LSMW is executed,PERNRs are getting created successfully in the ECC with in the Internal number range.(We are giving PERNRs in the input file).
I want to get a list of PERNRs which are generated by me after executing the LSMW (I do not want to refer PA0000 table to get the details). Actually I am not able to check the PERNR details in the LOG overview.
Please help me.

Try this way..
goto tcode SM35
select the session name and press the LOG button
and again select the session name in log overview press the dispaly button or press the double click the session name.
after this press the print button or CTRL+P
there you have option to download the log to excel file , after downloading the log , select based on message number which are created ....

Anybody not able to check their preorder confirmnation number when checking order status

Preordered my iphone 5 this morning, but i am not able to check the order status of it using the preorder confirmation number that i received, i keep getting an error on verizon's site..."Please check the information you have entered. Data may be missing or may have entered an invalid Pre-Order Number or Last Name."

I cannot get mine either... I am now worried the order is not actually in their system. I also get a certificate warning on the confirmation email they sent.
My bank shows they made an authorization for $0, but not the sale amount. My account still shows that I have upgrades available...
Any thoughts on this?

Not able to post the invoice cancel MR8M document

Dear All,
I am not able to cancell the invoice document using MR8M transaction. System is showing the message as "balance not zero, difference between debits & credits"
Invoice document is created in the FY 2006 as a credit memo, and now i want to reverse/ cancel it by using MR8M transaction.
Pl. let me know the possibilities & checks required for cancellation of it.
Regards
Mangesh

hi,
2006 documents cannot be reversed now since the posting period will be closed.
I think there is no solution. the only solution is
If the vendor is live and supplying any material adjust against them.
G.Ganesh Kumar

I am trying to install windows 7 to my Macbook pro with bootcamp but every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7", any solutions ?

Hi, I am trying to install Windows on my MacBook Pro with bootcamp. Every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7". I did this before using the same computer and the same hard drive so I am not sure why this is happening now but did´t happen then. Any solutions ?

Was your Bootcamp info.plist manipulated to change any options?

Duplicate Invoice Check Not Checking the Gross Invoice Amount-

Gurus,
When checking for duplicate invoices in MIRO/FB60, I have made all the config and setup but still the system is not checking the gross Invoice amount field. Lets say I enter
Invoice 1 :
                 Vendor                 X
                  Reference            123
                  Date                    10/27/2010
                  Company Code : 1111
                  Currency           : USD
                  AMOUNT           :100         and post this invoice
I try to enter the second invoice
Invoice 2:
                   Vendor                 X
                  Reference            123
                  Date                    10/27/2010
                  Company Code : 1111
                  Currency           : USD
                  AMOUNT           : 90
I get the error message even though the AMOUNT in the second invoice is 90 which is not the same as first invoice .
I chcked the vendor master duplicate check, made the config in spro-liv for duplicate invoice for company code, reference number and invoice date.
The help says that after 4.6 version if all of them match, then the system wiill throw error, but in my case the amount is not matching and its still giving me an error.
Kindly help..<< Moderator message - Please do not offer points >>
<< Moderator message - Everyone's problem is important >>
Edited by: Rob Burbank on Oct 27, 2010 4:07 PM

Hi,
After making the duplcate invoices chek at spro will checks the reference number of the invoice entered previouslu with that one entered later for that company code.as the first check itself failed system throws the error thinking, you are trying to enter a duplicate invoice for a already posted invoice though how much is the amount in the second invoice .
It will allow to enter the item details , if the dupplicate invoice check is properly configured for that company code and ref number .Did you get the error mesage after entering the details?If you get a error a message which stops furthur entry them your conf is correct, if not you may need to check back .
Check the invoice toletrances at spro too amount.
the below link explains you the process of dupliation in LIV.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/ce/4f3e39ea3aee02e10000000a114084/frameset.htm
Regards,

Configuration check error: The SMD Agent is not able to connect the Satellite System (J2EE stack)

Hi friends,
Getting the below error in step 10 (configuration check) in managed system configuration.
The SMD Agent is not able to connect the Satellite System (J2EE stack).
Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this
System.
java.rmi.RemoteException.P4 Connection failed -
P4AuthorizationException -
com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
Access is denied to SAP System sid [XYZ/null]: check the connection
credentials.More details about the error in agent 'xyz' log file
(SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
authenticate the user.
The SMD log file referred to in the log above gives the same information and not anything much useful.
Any idea what could be the reason for the above error?
Thanks,
Arindam

Hi All,
Thaks for your suggestions. I chcked the note 182020, but the issue described in the note is for error byte code adapter installation whcih is not my case. The byte cde adapter intallation has been successful in our solman system All the steps from 1 to 9 are green. Only in step 10, check cniguration I am getting the above error.
The logon test wth the user id in step 3 "Enter system parameters" is successful. The message server port is also correct.
Hi Khaja,
I went to the links as suggestedby you but there its about a ifferent error message "Invalid Response Code: (401) Unauthorized.". I am not getting any such kind of error.
All I am getting is this -
The SMD Agent is not able to connect the Satellite System (J2EE stack).
Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this System.
java.rmi.RemoteException.P4 Connection failed -
P4AuthorizationException -
com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
Access is denied to SAP System sid [XYZ/null]: check the connection
credentials.More details about the error in agent 'xyz' log file
(SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
authenticate the user.
Thanks,
Arindam

TS4513 I KEEP GETTING THIS ERROR. PLEASE HELPMainStage 3 was not able to complete the download. Check your internet connection and try downloading again.

I KEEP GETTING THIS ERROR. PLEASE HELPMainStage 3 was not able to complete the download. Check your internet connection and try downloading again.

Hi
From others (on the Logic Forums), it seems that there may have been issues with Apple's servers.
Try again...
if that does not work, delete Mainstage, and then try again to download teh whole thing.
Alternatively, the direct link to the basic content is here:
https://discussions.apple.com/thread/6015391?tstart=0
CCT

10/4-2014 - "GarageBand was not able to complete the download. Check your internet connection and try downloading again." Ver. 10.0.2.

I have downloaded GarageBand and when I first clicked to open it started dowloading a content package. But then in the middle of this it told me that my perfectly fast working internet connection was not availeble. See attached screenshot.
Does anybody know how to solve this?
I have tried deleting and downloading againg but same message appears.
Best,

GarageBand was not able to complete the download. Check your internet connection and try downloading again.
Todavía no puedo instalarlo, lo he descargado y eliminado por mas de 5 veces.
Por favor alguna solución a esta situación?

F110- not able to clear the debit and credit entry with the same reference

Hi,
I am not able to clear the debit and credit entry with the same reference in F110 even after having the payment terms as immediate payment, payment method is maintained in document no and vendor master data. Both debit and credit entry is appearing in FBL1N as an open item but it is not appearing in F110.
In Log message appear as 8 days grace period is existing whereas as payment term is just 0001- immediate payment.
Kindly advice me what could be wrong.
Thanks,
Manya.

Hi,
Credit and debit balance in vendor account are not cleared automatically when only vendor line item has payment method and credit memo has not payment method. Also when there is not payment method maintained in vendor master data.
In such case to avoid payment to vendor when vendor has debit balance we perform debit balance check.
In second scenario when u2018individual paymentu2019 is selected in vendor master data vendor invoice and credit memo are not cleared automatically in F110.
To setoff vendor credit and debit balance in F110 you to uncheck u2018individual paymentu2019 check in vendor master data > company code data > payment data.
Thanks!
Raju

Not able to post outgoing excise invoice

hi expert
i am not able to post outgoing excise invoice, its showing error that G/L account is missing (1) and i checked evrywhere
in tax code ,outgoing cenvet clearing account is there ..
can anyone know where i am missing

Hi Sahil,
Check below three reasons .....
1. open form setting on outgoing excise invoice and tick the g/l account and choose it at transaction time.
2. Check cenvat account on warehouse level .
3. Check cenvat account on item group level
4 Check cenvat account in g/L account determination(General tab) .
Regards
Deepak Tyagi

Workflow - I am not able to recieve the Deadline notification in my Inbox?

Hi,
I have a workflow wich checks the Incoming invoice against a PO and then I post the Invoice.
If no action is taken on the Invoice then a deadline notification is sent to my Inbox.
There is no agent assignment and all the process is done in the background. I am not able to recieve the Deadline notification in my Inbox.
what could be the possible reason?
Regards,
Chamandeep

Hi Chamandeep,
Have you verified how the workflow is generated?
SWLD transaction, then Utilities -> Work Item Selection.
This report will list the work items generated by you into R/3 system.
There you can see the workflow log, if you double-click on one of the lines of the report.
If you have already done all of this and see all the recipients are correct, then you could take a look at SWU3 transaction (Customizing for Workflow) and see if the Workflow runtime system is completely customized.
I hope I had helped you.
Regards,
Daniel Carvalho

Not able to view the uploaded PAR file in the portal archive selection.

Dear All,
I have modified com.sap.portal.runtime.logon.par and have renamed it to some other name.
Now I have uploaded the par file.
The problem is that when choose new from PAR option (to create iview from a par file),I am not able to see the par file in the Portal Archive selection.
I also want to know that if I am able to call the par file in the iview, can I use this iview to have a portal login.
Our requirement is that we want to give login page for the portal in the portal home page.The portal home page will be for the anonymous users.
Kindly try to guide me

Hi Nitin,
Check ur Portalapp.xml file. If u have the following code in that just <b>remove</b> them
<property name="com.sap.portal.pcm.Category" value="platform">
<property name="inheritance" value="final"/>
Deploy it again.now u can see that par in ur portal.Refer this thread also
PAR File not seen
Regards,
Tamil K

Not able to check the GR invoice in MIGO

Similar Messages

Maybe you are looking for