Not able to clear material from quality stock

Hi,
There is a stock inconsistency between inspection stock in materials management and inspection stocks managed in inspection lots.Due to this, unable to clear inspection stock. I tried with QA08 ,MB1B also assiging inspection type 08 but still posting not happening fron inspection stock to unrestricted stock.
Regards,
Ravi

Hi Ravi,
Please note / clarify following :
1) If in material master of QM you have activated post to inspection (no lot generation with 01 or 04 type insp) then stock will appear in quality, and you should or can only clear it using MB1B 321 movement type.
2) If already you have activated 01 or 04 or 08 then you will be allowed to post stock through inspection only (QA11).
3) Check one more important point :
From old lots somebody might have done result recording and given UD but forgot to do stock posting. you can find such lots with status 'SPRQ'. go to QA32 put particular material, remove range dates and select all insp lots. from the list apply filter to column 'system status' check for ' SPRQ ' in the filter. you will lots where UD given (green radio button) but stock posting pending.
Please elaborate if problem if not resolved.
Best Regards,
Shekhar

Similar Messages

QM: How to Move material from quality stock to unrestricted stock

Hi,
How to post material stock from quality to unrestricted without using 321.
Regards,

Hi,
if you have quality management active then you have to mainttain quality view in material master along with the inspection lot settings. now this will result in quality lot creation at the time of GRN. then you have to execute QA32 and get the lot. make usage decision and there you will find tab with lot quantity. there you have to give qty in unrestricted and save it.
if you dont have it then just do the transfer postingeither through MIGO or MB1B with movement type 321. give the mat. plant str loc. qty and save it.
regards,
Adwait Bachuwar

Mass Transfer Posting From Quality Stock to Return Stock with FI Effect

Dear Gurus,
1 Is there any way To do Transfer Posting At a stretch 1500 material list from Quality Stock to Returns Stock within a plant ?...
2 Effect of Financial Entries eg Cost ?..
Thanks & Regards
Darvesh

Hi Shoib,
Is there any way To do Transfer Posting At a stretch 1500 material list from Quality Stock to Returns Stock within a plant ?...
2 Effect of Financial Entries eg Cost ?..
Sol: 1 ans is No. You Can not transfer a 1500 material from quality to unrestricted stock, Cause the Transfer of material is based on Either PO or material doument
If you still want to do it Chek with your ABAper to develop a BDC wich can transfer the material and or each PO it should crreate a Accounting Document

Weird Problem in QM stock posting from Quality Stock to Unrestricted

Hi all,
Today I hit a weird problem in SAP and struck there for the past 5 hours. The problem is,
I have a batch managed material, for which QM view is available. 01 inspection type is activated along with the "Post to Inspection Stock indicator" for that material in material master.
Now I am creating a Purchase order and doing a goods receipt in MIGO. Then it creates a inspection lot of type 01
for this material and puts the stock in to Quality stock (I checked in MMBE).
Now as per standard SAP behaviour, if I want to move the stock from Quality to Unrestricted, I can only do it in QA11 trasaction through Inspection stock tab. If I try to do 321 (Quality to Unrestricted) movement in MIGO, the system will send an error message "Change the inspection stock of material XXXXXXX in QM only"
But in my case, I am not getting this error message, the system is still allowing me to move the stock from Quality to Unrestricted thorugh MIGO using 321 movement. This is not standard and I don't want this.
This behavior is seen in 04 and 08 inspection lots also (with post to insp stock indicator).
The aftermath of this problem, if I do a MIGO transfer posting of say 100 PC through 321. The system is correspondingly updating the MMBE transaction by moving this 100 PC from Quality stock to Unrestricted. But if I go to QA11 and check, the QM still shows that 100 PC to be in Quality stock itself, thus creating a mis-match between actual stock situation and the stock situation in QM.
I already checked and most of the SPRO nodes and I am left clueless. One more thing, Usage Decision is not yet done for the inspection lot and it is just REL status. Also thee are no developments or enhancements in QM module in my project. Only 1 enhancement relating to custom sample label and rest of all the functionality is standard.
Sorry for the long post. How to correct this? Please help me!
Thanks in advance,
Vinodh

I don't know why this happenned. Look at the QM view of the material master and see if the "inspection setup" flag on the QM view is clicked on. That is usually greyed out and is set by having an inspection type activated. You can't manually set that once an inspection type is added. But that is the indicator I believe is used to determine if regular stock movements are allowed for QM stocks.
I would try to first clear all your inspection lots first.
Then delete all the inspection types from the material. And I mean actually go in and delete them.
Then use QA08 to reactivate the ones you need.
Then see if this solves the problem.
FF

Movement of Material from Quality.

Hi ALL,
The inspection lot is created with Insp. type "04" ..'Goods receipt inspection from production'...The usage decision as "DEV2" has been made for the lot...but the qty for offgrade has been posted to Quality instead of unrestricted. and new insp lot of type '08' is created..for the offgrade..
On analysis it is found "Post to insp stock " indiactor was not set...So this takes care of all future lots...But for the current lot how to move the material from Quality to Unrestricted...SAP does not allow to carry out UD for the 2nd lot.."08" .
Your help is required..
Thanks,
Regards,
Ameya K.

Hi Sriramachandra,
Thanks for the reply..Actually now two inspection lot exists...one with type"04' whose UD was done as "DEV2" devalue for scrap..and as a result system prompted to enter the Offgrade material ...
As a result new lot got created with new batch for the offgrade...Now do i have to create insp plan for the offgrade...or is there any other alternative...?
Thanks
Ameya k.

Moving material from quality to unrestricted

Hi Experts,
We have a scenario where the user has given the UD but the stock posting tab was missing in the QA32 screen, so stock posting could not be done. Now in the stock overview the material is available in quality stock only. We want to take the material to unrestricted stock. Inspection types 01, 08 and 09 are active in material master. Please advise how to proceed? If we try to transfer material from quality to unrestrictedthrough 321 movement in MB1B, we are getting error message "change inspection stock in QM only ". Please advise.
Regards
Sm.

Hi
08 is Stock transfer
The QM component cannot manage stock movements for inspection lots that were created manually.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/89/9bb43418e43b4ae10000009b38f83b/frameset.htm
This inspection lot is created automatically during stock transfer or created manually ?
Alagesan

How to transfer material from blocked stock to scrap location

Dear Experts,
Weu2019ve put some of raw material into blocked stock. Now we want to scrap these materials & for that Iu2019m trying to take it to unrestricted stock from blocked stock by MIGO (transfer posting ,Mvt type=343).
But during that system shows an error message that u201CBest before/SLED of batch has been exceededu201D
Due to this Iu2019m not able to scrap the material from blocked stock.
Pls advise what to do .Is there some other way to do it??
Thanks in advance

Hi,
You can directly scrap it from Blocked stock using movement type 555 . Further from the message it is observed that SLED( Self Life Expiration Date ) check is active for this material in material master . Try to scrap it in 555 mvt .
Dhruba
Edited by: Dhruba Charan Behera on May 18, 2011 12:51 PM

Not able to open mail from my mac, gmail repeatedly asking for password. but using same password able to open gmail on safari

not able to open mail from my mac, gmail repeatedly asking for password. but using same password able to open gmail on safari

okay well they got me to take out some .plist files to see if that would help it didn't. I'm not sure what ones that they deleted for my self maybe someone here would be abel to tell you what ones to take out but didn't work the one that came close to working was this going into keychain and deleting the account(s) then reading them again.
if you are to do this please back up first with Time Machine. You can do this with a usb drive.
Okay so go back to where you had internet accounts and make sure mail is shut. click the - on the account your having problems with then quit system preferences.
Okay so then press cmd and space bar at the same time then type 'keychain access' into the search then click on 'keychain access'
once it is open go to the top of the window and put your email address that you are having problems with.
once you have put in your full email, have a look at what comes up i deleted things in the kind colome with 'internet password' and anything with under name that had smtp.gmail.com or imap.gmail.com so it would look like this, map.gmail.com - internet password.
right click and delete them. make sure not to touch any other files that dont say them things on them.
Once you have done this quit keychain access and then restart the computer, once the computer is restarted go back to system preferences and internet accounts and re-add the account.
Hope this helps. if something is not clear just ask.

Not able to post material

Hi,
I am not able to post material in MB1C.I am getting error,"posting only possible in periods 2002/11 and 2002/10 in company code ZVAN". I have already done,OMS2 and OMS2.

Welcome to this forum. Please make a search in the forum before posting any repeated questions. This question has been answered many times and you will get inputs from there.
thanks
G. Lakshmipathi

I installed Firefox sync and then used iphone app called FireFox Home and I can syncronize history, tabs and bookmarks. But I am NOT able to syncronize passwords from Firefox in my Macbook to FireFox Home on iPhone !

I installed Firefox sync and then used iphone app called FireFox Home and I can syncronize history, tabs and bookmarks. But I am NOT able to syncronize passwords from Firefox in my Macbook to FireFox Home on iPhone so I am very terrible to input my IDs and Passwords with my hands on FireFox Home when I log into Facebook, Twitter etc... Is it issue or something like that? If you have some solutions to make it clear, can you tell me how to syncronize memorized IDs and Passwords for the webs. Thank you.

You can look in Tools > Options > Sync
Menu differences: [http://kb.mozillazine.org/Menu_differences Windows: Tools > Options - Mac: Firefox > Preferences - Linux: Edit > Preferences]
See also:
* [[What is Firefox Sync]]
* [[How to sync Firefox settings between computers]]
* [[How to sync Firefox between my desktop and mobile]]

Material in quality stock to unrestricted

Hi,
I have a material in quality stock and I want to transfer it to unrestricted. No inspection lot exists of that material and all the usage desicions have been taken. I have read to generate a manual inspection lot with insp. type 08 or 0800, but I don't if its correct and how can I do that?
regards,

Please check the exact flow of the process.
For a Material with Inspection setup in QM view of material master.
step1
The moment you post GR , the stock will be received into QI status in IM
and in WM stock will be under storage type GR Area External Rcpts Q status .
Step2.
Using LT06 create a TO for the Material document IM stock will be in QI status
WM stock will be under selected storage type (during TO processing ) in QI status.
step3.
Then complete the usage decision against the Inspection lot using QA32.
movement type 321 is triggered and stock moves from QI to unrestricted stock in IM.
step4.
Confirm the TO created in Step 3.
step 5.
create a TO against PCN created in Step 3.and confirm.Stock will be in unrestricted status , available stock in WM.
Since you are saying that stock is in Q status at WM level.
pl. check if any PCN, TO is open for the Material
and try to close those by either creating a TO against PCN - LT05
or confirm if TO exist by using Lt12.

Required reference document to issue the material from project stock

Hi All,
we have procure the project stock material with Acct. assignment Grp as "Q", now the material is laying in project stock.
the things is we can issue the warehouse material with reference to Project Reservation similarly my client wanted to use some SAP document for records purpose to issue the material from project stock.
i have checked this functionality in SAP which is not available except straight way issuing the material from project stock using MB1A( 221 Q).
please help me out to resolve this requirent.
manoj singh
we can

Hi,
Did you implement PS module in your system? How were your project stocks reserved?
Cheers,
HT

HT201263 I am not able to restore neither from iTunes nor from iCloud. The proble with iTunes is it says that the backup is corrupted or incompatible. And I am not able to connect to iCloud for restoring. I have IOS 7.0.4 when I have taken the backup.

I am not able to restore neither from iTunes nor from iCloud. The proble with iTunes is it says that the backup is corrupted or incompatible. And I am not able to connect to iCloud for restoring. I have IOS 7.0.4 when I have taken the backup.
iCloud does not connect and it says Request Timed out.
Not Sure how to restore my iPad.
Please help!!
Thanks

my problem is with I cloud not iTunes what's up with apple haven't they got the brains to sort out this prob, that they have to let the "community " know instead of helping to fix the problem without having to go through all the hassle of signing in writing a small blog & then leaving it until someone bored with time to write their blog to at some point fix the prob or not ! oh nearly forgot my prob like
HRESULT:0X80070570 no clear explanation as to what this means or why in plain English for the not techno phoebes

Not able to CIF materials from R/3 system to APO

Hi
I am not able to CIF materials from R/3 to APO, Integration model is failing and it is giving me following error,
'' Unkown reference product XXXX for packaging in product YYYY"
Basically looks like for above product YYYY there is reference packaging material XXXX attached in Material master data, Basic data view Tab1 in R/3, During CIF process it is giving error related to this reference packaging material,
Can anyone help on this?
Thanks and regards
Nitin Lavhe

Nitin,
CIF across XXXX first, then YYYY.
Best Regards,
DB49

The system could not find the finished material in the stock.

The system could not find the finished material in the stock and gives the following error:
Only 0 YD of material 9000345 A-PIECE01 available.
I received the batch managed material from production with T-code=mb1c and mov type=521.
The received material is transferred into material with T-code=mb1b and mov type=309.
And finally the material is packed and thus the handling unit is created.
whenever i comes to make the delivery order in vl01n,the system could not find the stock packed in handling units and gives the error(Only 0 YD of material 9000345 A-PIECE01 available)
Regards:Vijay

Hi Vijay,
I have a question that have you define the UoM properly in the material master.
Also check the stock is showing or not in the system for your material.
Regards,
MT

Not able to clear material from quality stock

Similar Messages

Maybe you are looking for