Not able to close project:

While closing a level 1 WBS, we are getting error message "Incoming order value not settled in full"
However for this project, All WBS below level-1 are closed and for level 1 WBS, no operative indicator is selected.
Not billing/ Planning or account assigned.
Also there is no order attached to this WBS element as wbs element is not a billing element.
Strange thing is now billing element indicator is gryed out.
So we could even not carryout CJA2/ KKA2 as this is not a billing element.
Also we could not reverse CJA2 as system gives error that WBS is non billing element. and we could not set it as it is gryed out,
CJI3 shows balance zero.
Also WBS settlement parameter we could not bring in edit mode so that we could change those.
Please assist how we could remove this error and close the WBS.
regards, madhu

Hi Madhu,
Try CJEN. It may solve the issue.
Warm regards,
Srinivas Potluri

Similar Messages

Not able to close asset fiscal yearar

Hi,
Not able to close fiscal year in asset accounting for multiple company codes.
In OAAQ asset closed year is 2010 at company code level but in OAAR for depreciation areas there are different closed fiscal years for the same company code.
For depreciation areas 01 & 15 asset closed year is 2010 (matches with OAAQ) but for other depreciation areas 12, 16, 20, 31, 40 closed fiscal year is 2012.
I am unable to change fiscal year to 2011 for depreciation areas 12, 16, 20, 30, 31 & 40 and unable to close fiscal year 2011 via AJAB.
Do we have to update table T093B to change closed fiscal year for each depreciation area manually or any sap note available for the same.
Regards,
Durgasankar

Hi All,
Thanks for your valuable inputs.
1) When i am executing AFAB i am getting error that fiscal year 2011 to be close first.
2) When i am executing AJAB for fiscal year 2011 i am getting error that 2011 already closed for depreciation area 15 whereas for depreciation area 01 closed fiscal year is 2010.
I have applied the corrections of note 646691 and issue got solved.
Regards,
Durgasankar

Not able to close the Org Period

Hi,
We recently upgrated from 11.5.10.2 to 12.1.3, and we are not able to close the org due to error in tables WSM_LOT_MOVE_TXN_INTERFACE and WSM_LOT_SPLIT_MERGES_INTERFACE. The records are getting reflected as 'Pending WSM interface' - Resolution Required.
These records are back dated, with year as 2007/2009 and for some Jul'11, for which period has been closed except Jul'11 which is - 'Closed not Summarized'.
Sample records are like
Pending Shop Floor Lot Split Merge Transactions WSM_LOT_SPLIT_MERGES_INTERFACE Resolution Required
Header Id Transaction Id Transaction Type,Transaction,Date,Transaction Reason,Reference,Lot,Process,Status,WIP,Flag,Split,Flag,Group Id Request Id Error Message,
1030,Lot Based Inventory,Translate,25-OCT-07 07-3547-B4 Error 2 1 1031 210415824 Invalid lot_number in Starting Lots,11547,Lot Based Inventory,Translate,25-OCT-07 07-3547-B4 Error 2 1 ,11548 211066708 Invalid lot_number in Starting Lots
Pending Shop Floor Lot Move Transactions WSM_LOT_MOVE_TXN_INTERFACE Resolution Required
587560686 2 12-MAR-09 09-4139-C1 Error 17200 50 END 999 END 20156699 290394731 Error:WSMPLBMI.MoveTransac
tion(stmt_num=240) :
Has any one faced same issues with OSFM/INV modules closing process ?
Regards
Adarsh K

Hi,
Please check the charecterstic of Book Area 01 in customization. If net book value has been maintained as negative, then you have to run depreciation to make it negative.
If depreciation for all asset has not been run a particular fiscal year then you cannot close the fiscal year.
Please check wheather depreciation for all additional assets has been run or not.
Hope you have understood.
Regards
Tapan

In P6 version7 not able to copy project with the baseline.

Hi,
In P6 version 7 it is not able to copy project with the baseline. It copies only the schedule.
Please help.
regards,
Baber.

Tried the solution from another thread but did not work completely (as warned) - the workaround didn't quite work for me either:
https://discussions.apple.com/thread/1398462?start=0&tstart=0
Ended up taking a backup, did a fresh install, created the account as the first one so that it gets the same UID as the other Mac (on which my account was the first) and restored my data - was painful but finally on track.

Not able to assign Project to the Urgent Change Request with Developer Id with the existing Authorizations. With SAP_ALL authorization, everything works fine.

The Urgent Change request is in created status and I am not able to assign project to it. Also I am not able to change the status of the change request to In developement with developer's Id. Everything works fine if i assign SAP_ALL authorization to the developer.
Below are the roles assigned to Developer ID -
SAP_CM_SMAN_DEVELOPER
SAP_SM_CRM_UIU_FRAMEWORK
SAP_SM_CRM_UIU_SOLMANPRO
SAP_SM_CRM_UIU_SOLMANPRO_CHARM
SAP_SMWORK_BASIC_CHANGE_MAN
SAP_SMWORK_CHANGE_MAN
SAP_SOCM_DEVELOPER
Z_S001
ZSAP_SOCM_DEVELOPER
Issue screen -
SU53 for Developer-
Please suggest which roles/Authorization should be assign to Developer Id.
Thanks
Kavita

Hi Kavita,
Copy these roles to Z-roles
SAP_CM_SMAN_DEVELOPER
SAP_SM_CRM_UIU_FRAMEWORK
SAP_SM_CRM_UIU_SOLMANPRO
SAP_SM_CRM_UIU_SOLMANPRO_CHARM
SAP_SMWORK_BASIC_CHANGE_MAN
SAP_SMWORK_CHANGE_MAN
SAP_SOCM_DEVELOPER
Assign this to user.
Put a stace using ST01.
Find that object and modify/add in your custom role.
Regards,
Divyanshu

I am not able to close Microsoft Database Daemon or SyncServicesAgent applications to install Office 2011 14.4.1 update. Could you assist me? Thanks in advance

I am not able to close Microsoft Database Daemon or SyncServicesAgent applications to install Office 2011 14.4.1 update. Could you assist me? Thanks in advance

The updater should close those processes for you - it didn't used to do so but should now.
If it won't quit the processes for you, open Activity Monitor (Applications>Library folder), search for the processes and quit them. You should be able to install the update now.
I just find it odd that the updater isn't quitting the processes on its own..
Clinton

I'm not able to close the filefox or any tab in Firefox 28.0 v for sometime. It seems that i don't have control over it.

I'm not able to close the filefox or any tab in Firefox 28.0 v for sometime. It seems that i don't have control over it. Also if i'm watching any video not able pause it or move forward or use full screen.
While as i'm opening the same like in IE itz working fine.
I'm using firefox from past 5 years. Can u fix it as i temporary moved to chrome.

hello, i'm not sure what filefox is - can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

Users are not able to edit projects even with right permissions

Hello,
We have a weird issue. Your help or inputs is appreciated.
A user is not able to edit projects in SAP PPM 50 unless 1)the project is created by the user and 2)user has access to ACO_SUPER auth object. For the projects, the user is trying to edit, we made sure user has write ACL access in the administration tab of the project.
Obviously, we can't give all users ACO_SUPER access. Please advise how to proceed.
Thanks in advance

Hi Pranith,
You are right..ACO_SUPER is not recommended for all users, it's an super user access.
In PPM-Project management, there are two authorizations
1) General Authorizations
2) Project Specific authorizations
General authorizations:
This is provided to user using a backend PFCG roles like 'SAP_CPR_USER' which contains business partner view access and other similar roles are assigned for project creation, template creation etc.,
Project Specific authorizations:
This authorizations are provided using ACL 'Authorizations' tab within the project and here you have different authorisation activities like admin, write, read & none.
As you said, the user who creates the project will get 'Admin' authorization and after that if you want give access to other users, then you need to add manually users in the project definition-authorisation tab or you can provide default authorization through project role type.
Have you added the users manually in authorisation tab?
Regards,
Ravi

RH 9 - Not able to edit project settings (styles)

Hi.
Once I import my FM 9 files I'm not able to edit my project settings via the Project Settings dialog. I can access the dialog, but when I try to edit the Style settings, none of the current style settings display. I followed the directions in Online Help and it did not indicate that this could not be done with imported documents as opposed to linked documents. Could that be the reason why?
Thanks in advance.

While importing a FM document, the style settings can be done through import wizard. Following steps may be followed.
1. Click File->Import->FrameMaker Document menu item.
2. "Import File" dialog opens. Browse and select the desried FrameMaker document.
3. "Content Settings" dialog appears. Do any TOC/Index/Glossary related setting if required. Click Next.
4. Click "Edit" button.
5. "Conversion Settings" dialog opens where style related settings can be done. The dialog will show all the styles of the FrameMaker document being imported currently.
This way style settings can be done for FrameMaker document being imported.
The "Conversion Settings" dialog opened through "Project Settings" dialog displays the styles of all the linked documents and not of imported document. However, if some settings are done for a linked document, those settings are available by default for all the FM documents being imported in the project.
I hope this resolves the issue.
Please let us know in case you have further queries.
Mayank

In iOS 7 , i am not able to close the newsstand app while it is running. Is it a bug?

I am using ipad with retina display. I have opened the newsstand app. When I tried to close it using my fingers, I am not able to do it after upgrading to iOS 7. Is it a bug?

try double clicking the home button and swiping the app up and off the screen. if that dosn't work thne you may want to try turning it off and on again.

Delegate not able to edit project in project professional

I have a scenario where the delegate is not able to edit the project in project professional which already under the ownership of the person whom he is delegated for.
Is this standard feature or limitation? Any fix or references from Microsoft?
Regards, Syed Faizan ur Rehman, CBPM®,PRINCE2®, MCTS

Hi,
this is just a limitation. Delegation does only work in PWA, not in client. Sorry!
See also
http://blogs.msdn.com/b/project/archive/2010/03/19/project-2010-introducing-delegates.aspx (does also apply to 2013), section 3.c "Project Professional. The delegate session does not apply to Project Professional."
Regards
Barbara
To increase the value of this forum, please mark the replies that helped to solve your issue as answer. If you find answers to questions from other forum participants to be helpful, please mark them as helpful. Your participation will help others to find
an appropriate solution faster. Thanks for your support!

Why am I not able to close an apple ID or consolidate them together?

It becomes extremely confusing when you have more than one apple ID. When I am purchasing a new app or upgrading them, I want to pick the apple ID that I want to download the new app either.
The option to completely close an apple ID is unavailable too, so if you sign up there is no way out.
Surely in the year 2011 we should be able to identify the confusion all of these can cause and offer a remedy....
Either allow the users to consolidate Apple ID or simply let them close it. I don't understand why we can't....

Here is the situation.
I have one email address which I regularly use for everything and another email address that I dont regularly use, lets call them Email A and Email B respectively.
When I bought my iphone 3G, I decided to use email B to create an account without putting my credit card details (it is actually possible) and that way my information wont be compromised and also email B was dedicated purely to itune.
Now that I have bought my Iphone 4 I decided to edit the original account on itunes and use email A to receive everything in the email address that I check every day. But as soon as I tried editing my current account and putting email A in the place of email B, it said Email A has an apple ID attached to it and cannot be used as a replacement.
Ideally I would have wanted to get rid of the apple ID that is associated to email A and use that email in my current itune account as a replacement for email B. But that is not possible, neither is consolidating the two of them.
Now I have created a separate Itune account using email A with all the credit card details etc, however because 100% of the apps on my iphone have been downloaded with the other account, every time I connect Iphone4 and try to log onto itunes using email A, itune crashes completely.
Also every time I try to download an app on my iphone it does not allow me to "pick" what account I want them downloaded under. It picks it for you.
Something simple like this should be child play to avoid all the hassles.

Adf table with detail stamp , not able to close the detail stamp

Hi
i'm using 11g adf jdeveloper.
I'm using adf table to display records of XXXVO.In table i have used detail stamp, in which i have drag XXXVO read-only form and used a ADD button which call a pop-up with createInsert of the XXXVO form with submit button.In pop i have used a drop downlist of other YYYVO. I have used another button Edit which call the same pop-up, using show pop-up.
Issue is when i run the application i can open the detail stamp and close but i couldn't get the selected record on the table in edit mode pop up. if i give partial trigger in pop-up of table id . den i'm getting the selected record in edit pop up. but detail stamp is not working .
Here is the code .......
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1">
<af:messages id="m1"/>
<af:form id="f1">
<af:pageTemplate viewId="/XBBaseTemplate.jspx"
value="#{bindings.pageTemplateBinding}" id="pt1">
<f:facet name="body">
<af:panelBox text="AMC Charges" id="pb1">
<f:facet name="toolbar"/>
<af:panelGroupLayout layout="scroll" id="pgl1">
<af:panelCollection id="pc1"
inlineStyle="width:1105px; height:336px;">
<f:facet name="menus">
<af:menu text="Export Excel" id="m2">
<af:commandMenuItem text="Excel" id="cmi1">
<af:exportCollectionActionListener exportedId="resId1"
type="excelHTML"/>
</af:commandMenuItem>
</af:menu>
</f:facet>
<f:facet name="toolbar">
<af:toolbar id="t1">
<af:commandToolbarButton id="ctb1"
icon="/Images/browse.gif"
shortDesc="Search"
partialTriggers="resId1"
disabled="#{UsapProgramPrivilege.query}">
<af:showPopupBehavior popupId=":::p2"/>
</af:commandToolbarButton>
<af:commandToolbarButton id="ctb_add"
icon="/Images/addsymbol.png"
shortDesc="Add"
action="#{MasterManagedBean.createRecord}"
useWindow="true"
windowModalityType="applicationModal"
windowHeight="300"
windowWidth="300"
disabled="#{UsapProgramPrivilege.insert}"/>
<af:commandToolbarButton
id="ctb2"
partialTriggers="resId1"
icon="/Images/update_ena.png">
<af:showPopupBehavior popupId=":::p_edit"/>
</af:commandToolbarButton>
<af:commandToolbarButton id="ctb_delete"
icon="/Images/delete_ena.png"
shortDesc="Delete"
partialTriggers="resId1"
actionListener="#{bindings.Delete.execute}"
disabled="#{UsapProgramPrivilege.delete}"/>
<af:commandToolbarButton id="ctb3"
icon="/Images/filesave.png"
shortDesc="Save"
partialTriggers="resId1 ctb_add ctb_delete :::cb1"
actionListener="#{bindings.Commit.execute}"
disabled="#{!bindings.Commit.enabled}"/>
<af:commandToolbarButton id="ctb5" icon="/Images/undo.png"
actionListener="#{bindings.Rollback.execute}"
disabled="#{!bindings.Rollback.enabled}"
immediate="true">
<af:resetActionListener/>
</af:commandToolbarButton>
<af:commandToolbarButton id="ctb4"
icon="/Images/eraser-4.gif"
shortDesc="Clear"
action="#{MasterManagedBean.onClearTableSearchFields}"/>
<af:outputText value="CmmAmcRatesVO1Iterator"
id="ot_amciterator"
binding="#{MasterManagedBean.iteratorName}"
visible="false"/>
</af:toolbar>
</f:facet>
<f:facet name="statusbar"/>
<af:table value="#{bindings.CmmAmcRatesVO1.collectionModel}"
var="row"
rows="#{bindings.CmmAmcRatesVO1.rangeSize}"
emptyText="#{bindings.CmmAmcRatesVO1.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.CmmAmcRatesVO1.rangeSize}"
rowBandingInterval="0"
filterModel="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
filterVisible="true" varStatus="vs"
selectedRowKeys="#{bindings.CmmAmcRatesVO1.collectionModel.selectedRow}"
selectionListener="#{bindings.CmmAmcRatesVO1.collectionModel.makeCurrent}"
rowSelection="single" id="resId1"
binding="#{MasterManagedBean.masterTable}"
styleClass="hieght:100% width:100%"
columnSelection="multiple" width="1099"
rowDisclosureListener="#{MasterManagedBean.onRowDiscloseureEvent}"
partialTriggers="::ctb_add ::ctb_delete ::::cb1">
<af:column sortProperty="AmrtPrdId" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtPrdId.label}"
id="resId1c1">
<af:outputText value="#{row.AmrtPrdId}" id="ot8"/>
</af:column>
<af:column sortProperty="AmrtFeeId" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtFeeId.label}"
id="resId1c2">
<af:outputText value="#{row.AmrtFeeId}" id="ot7"/>
</af:column>
<af:column sortProperty="AmrtRateTyp" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtRateTyp.label}"
id="resId1c3">
<af:outputText value="#{row.AmrtRateTyp}" id="ot11"/>
</af:column>
<af:column sortProperty="AmrtFxdAmt" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtFxdAmt.label}"
id="resId1c4">
<af:outputText value="#{row.AmrtFxdAmt}" id="ot3">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtFxdAmt.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="AmrtPerc" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtPerc.label}"
id="resId1c5">
<af:outputText value="#{row.AmrtPerc}" id="ot4">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtPerc.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="AmrtMinAmt" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtMinAmt.label}"
id="resId1c6">
<af:outputText value="#{row.AmrtMinAmt}" id="ot2">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtMinAmt.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="AmrtMaxAmt" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtMaxAmt.label}"
id="resId1c7">
<af:outputText value="#{row.AmrtMaxAmt}" id="ot9">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtMaxAmt.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="AmrtFolioId" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtFolioId.label}"
id="resId1c8">
<af:outputText value="#{row.AmrtFolioId}" id="ot1"/>
</af:column>
<af:column sortProperty="AmrtCurrId" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtCurrId.label}"
id="resId1c9">
<af:outputText value="#{row.AmrtCurrId}" id="ot10"/>
</af:column>
<af:column sortProperty="AmrtRndMthd" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtRndMthd.label}"
id="resId1c10">
<af:outputText value="#{row.AmrtRndMthd}" id="ot14"/>
</af:column>
<af:column sortProperty="AmrtDecPlc" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtDecPlc.label}"
id="resId1c11">
<af:outputText value="#{row.AmrtDecPlc}" id="ot5">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtDecPlc.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="AmrtActiveYn" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtActiveYn.label}"
id="resId1c12">
<af:outputText value="#{row.AmrtActiveYn}" id="ot13"/>
</af:column>
<af:column sortProperty="AmrtHoldYn" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtHoldYn.label}"
id="resId1c13">
<af:outputText value="#{row.AmrtHoldYn}" id="ot12"/>
</af:column>
<af:column sortProperty="AmrtEffFdate" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtEffFdate.label}"
id="resId1c14">
<f:facet name="filter">
<af:inputDate value="#{vs.filterCriteria.AmrtEffFdate}"
id="id1"/>
</f:facet>
<af:outputText value="#{row.AmrtEffFdate}" id="ot6">
<af:convertDateTime pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtEffFdate.format}"/>
</af:outputText>
</af:column>
<f:facet name="detailStamp">
<af:panelFormLayout id="pfl2" rows="9">
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtPrdId.label}"
id="plam10">
<af:outputText value="#{row.AmrtPrdId}" id="ot31"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtFeeId.label}"
id="plam17">
<af:outputText value="#{row.AmrtFeeId}" id="ot20"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtRateTyp.label}"
id="plam11">
<af:outputText value="#{row.AmrtRateTyp}" id="ot28"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtFxdAmt.label}"
id="plam18">
<af:outputText value="#{row.AmrtFxdAmt}" id="ot16">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtFxdAmt.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtPerc.label}"
id="plam14">
<af:outputText value="#{row.AmrtPerc}" id="ot30">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtPerc.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtMinAmt.label}"
id="plam1">
<af:outputText value="#{row.AmrtMinAmt}" id="ot22">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtMinAmt.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtMaxAmt.label}"
id="plam13">
<af:outputText value="#{row.AmrtMaxAmt}" id="ot18">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtMaxAmt.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtFolioId.label}"
id="plam7">
<af:outputText value="#{row.AmrtFolioId}" id="ot27"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtCurrId.label}"
id="plam4">
<af:outputText value="#{row.AmrtCurrId}" id="ot26"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtRndMthd.label}"
id="plam6">
<af:outputText value="#{row.AmrtRndMthd}" id="ot25"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtDecPlc.label}"
id="plam12">
<af:outputText value="#{row.AmrtDecPlc}" id="ot21">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtDecPlc.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtActiveYn.label}"
id="plam2">
<af:outputText value="#{row.AmrtActiveYn}" id="ot32">
<f:converter converterId="CharYNAsString"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtHoldYn.label}"
id="plam8">
<af:outputText value="#{row.AmrtHoldYn}" id="ot24">
<f:converter converterId="CharYNAsString"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtEffFdate.label}"
id="plam15">
<af:outputText value="#{row.AmrtEffFdate}" id="ot23">
<af:convertDateTime pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtEffFdate.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.FeeDescription.label}"
id="plam16">
<af:outputText value="#{row.FeeDescription}"
id="ot29"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.FolioDescription.label}"
id="plam9">
<af:outputText value="#{row.FolioDescription}"
id="ot17"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.ProductDescription.label}"
id="plam3">
<af:outputText value="#{row.ProductDescription}"
id="ot19"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.CurrencyDescription.label}"
id="plam5">
<af:outputText value="#{row.CurrencyDescription}"
id="ot15"/>
</af:panelLabelAndMessage>
</af:panelFormLayout>
</f:facet>
</af:table>
</af:panelCollection>
</af:panelGroupLayout>
</af:panelBox>
</f:facet>
<f:facet name="first">
<af:panelStretchLayout id="psl3" startWidth="39px">
<f:facet name="bottom"/>
<f:facet name="center"/>
<f:facet name="start"/>
<f:facet name="end"/>
<f:facet name="top"/>
</af:panelStretchLayout>
</f:facet>
<f:facet name="top"/>
<f:facet name="Bticker"/>
</af:pageTemplate>
<af:popup id="p2">
<af:panelWindow id="pw1">
<af:panelGroupLayout id="pgl2">
<af:panelHeader text="AMC Rates" id="ph1">
<af:query id="qryId1" headerText="Search" disclosed="true"
value="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
model="#{bindings.ImplicitViewCriteriaQuery.queryModel}"
queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
queryOperationListener="#{bindings.ImplicitViewCriteriaQuery.processQueryOperation}"
resultComponentId="::pt1:pc1:resId1"
displayMode="compact"
/>
</af:panelHeader>
</af:panelGroupLayout>
</af:panelWindow>
</af:popup>
<af:popup id="p_edit" popupCanceledListener="#{MasterManagedBean.resetPopTitle}"
partialTriggers="pt1:pc1:resId1">
<af:panelWindow id="pw2" inlineStyle="width:600px; height:600.0px;"
title="Edit"
binding="#{MasterManagedBean.masterPenalWindow}">
<af:panelGroupLayout id="pgl3">
<af:panelFormLayout id="pfl4" rows="2" maxColumns="2">
<af:inputListOfValues id="amrtFeeIdId"
popupTitle="Search and Select: #{bindings.AmrtFeeId.hints.label}"
value="#{bindings.AmrtFeeId.inputValue}"
label="#{bindings.AmrtFeeId.hints.label}"
model="#{bindings.AmrtFeeId.listOfValuesModel}"
required="#{bindings.AmrtFeeId.hints.mandatory}"
columns="#{bindings.AmrtFeeId.hints.displayWidth}"
shortDesc="#{bindings.AmrtFeeId.hints.tooltip}">
<f:validator binding="#{bindings.AmrtFeeId.validator}"/>
</af:inputListOfValues>
<af:inputListOfValues id="amrtPrdIdId"
popupTitle="Search and Select: #{bindings.AmrtPrdId.hints.label}"
value="#{bindings.AmrtPrdId.inputValue}"
label="#{bindings.AmrtPrdId.hints.label}"
model="#{bindings.AmrtPrdId.listOfValuesModel}"
required="#{bindings.AmrtPrdId.hints.mandatory}"
columns="#{bindings.AmrtPrdId.hints.displayWidth}"
shortDesc="#{bindings.AmrtPrdId.hints.tooltip}">
<f:validator binding="#{bindings.AmrtPrdId.validator}"/>
</af:inputListOfValues>
<af:inputText value="#{bindings.FeeDescription.inputValue}"
required="#{bindings.FeeDescription.hints.mandatory}"
columns="#{bindings.FeeDescription.hints.displayWidth}"
maximumLength="#{bindings.FeeDescription.hints.precision}"
shortDesc="#{bindings.FeeDescription.hints.tooltip}"
partialTriggers="amrtFeeIdId" id="it10"
readOnly="true">
<f:validator binding="#{bindings.FeeDescription.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.ProductDescription.inputValue}"
required="#{bindings.ProductDescription.hints.mandatory}"
columns="#{bindings.ProductDescription.hints.displayWidth}"
maximumLength="#{bindings.ProductDescription.hints.precision}"
shortDesc="#{bindings.ProductDescription.hints.tooltip}"
partialTriggers="amrtPrdIdId" id="it7"
readOnly="true">
<f:validator binding="#{bindings.ProductDescription.validator}"/>
</af:inputText>
</af:panelFormLayout>
<af:panelFormLayout id="pfl6" rows="2" maxColumns="2">
<af:inputListOfValues id="amrtFolioIdId"
popupTitle="Search and Select: #{bindings.AmrtFolioId.hints.label}"
value="#{bindings.AmrtFolioId.inputValue}"
label="#{bindings.AmrtFolioId.hints.label}"
model="#{bindings.AmrtFolioId.listOfValuesModel}"
required="#{bindings.AmrtFolioId.hints.mandatory}"
columns="#{bindings.AmrtFolioId.hints.displayWidth}"
shortDesc="#{bindings.AmrtFolioId.hints.tooltip}">
<f:validator binding="#{bindings.AmrtFolioId.validator}"/>
</af:inputListOfValues>
<af:inputListOfValues id="amrtCurrIdId"
popupTitle="Search and Select: #{bindings.AmrtCurrId.hints.label}"
value="#{bindings.AmrtCurrId.inputValue}"
label="#{bindings.AmrtCurrId.hints.label}"
model="#{bindings.AmrtCurrId.listOfValuesModel}"
required="#{bindings.AmrtCurrId.hints.mandatory}"
columns="#{bindings.AmrtCurrId.hints.displayWidth}"
shortDesc="#{bindings.AmrtCurrId.hints.tooltip}">
<f:validator binding="#{bindings.AmrtCurrId.validator}"/>
</af:inputListOfValues>
<af:inputText value="#{bindings.FolioDescription.inputValue}"
required="#{bindings.FolioDescription.hints.mandatory}"
columns="#{bindings.FolioDescription.hints.displayWidth}"
maximumLength="#{bindings.FolioDescription.hints.precision}"
shortDesc="#{bindings.FolioDescription.hints.tooltip}"
partialTriggers="amrtFolioIdId" id="it9"
readOnly="true">
<f:validator binding="#{bindings.FolioDescription.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.CurrencyDescription.inputValue}"
required="#{bindings.CurrencyDescription.hints.mandatory}"
columns="#{bindings.CurrencyDescription.hints.displayWidth}"
maximumLength="#{bindings.CurrencyDescription.hints.precision}"
shortDesc="#{bindings.CurrencyDescription.hints.tooltip}"
partialTriggers="amrtCurrIdId" id="it3"
readOnly="true">
<f:validator binding="#{bindings.CurrencyDescription.validator}"/>
</af:inputText>
</af:panelFormLayout>
<af:panelFormLayout id="pfl1" rows="5" fieldWidth="150">
<af:selectOneChoice value="#{bindings.AmrtRateTyp.inputValue}"
label="#{bindings.AmrtRateTyp.label}"
required="#{bindings.AmrtRateTyp.hints.mandatory}"
shortDesc="#{bindings.AmrtRateTyp.hints.tooltip}"
id="soc1">
<f:selectItems value="#{bindings.AmrtRateTyp.items}"
id="si1"/>
</af:selectOneChoice>
<af:inputText value="#{bindings.AmrtFxdAmt.inputValue}"
label="#{bindings.AmrtFxdAmt.hints.label}"
required="#{bindings.AmrtFxdAmt.hints.mandatory}"
columns="#{bindings.AmrtFxdAmt.hints.displayWidth}"

See if this helps:
http://blogs.oracle.com/shay/2010/03/popup_details_for_a_table_reco.html

Not able to Close PO or Mark deleted

Hi All,
I have to close a PO but system doesnt allow to close it or mark the line Item as Deleted. The reason for the error is IR value is more than GR value. We dont have GR based IV.
How can I close the PO.
Thanks
Nsandeep

Hi,
If there is difference in GR/IR it will not allow to delete the PO if IR is pending or More IR.
You can do post the difference in GR/IR.Using MR11 then it will be balance between GR/IR.
Once tis equal then you can delete the PO. by selecting the line item and set deletion button.
Rgs

Not able to close the lid of laptop without it going to sleep

I have a 3000 V100 when I am use the external monitor connected to the port replicator when I close the lid the laptop will go to sleep. I have changed the setting for it not to go to sleep and it holds until I log out and log back in it changes them back. In fact I have checked if you change them click on apply and then OK and then check them again they have already change back.
I was told by support to upgrade the BIOS, Power Drive and Power management which have been done. I was then told this is the way it works unless you use your image. That does not make any sense. If you have a laptop an it is connected to Port replicator with a external monitor then why would you need the laptop cover open.
Is there a solution for this problem, if so what is it

Also [here|http://www.sapfans.com/forums/viewtopic.php?f=7&t=347230]
PeteA

Not able to close project:

Similar Messages

Maybe you are looking for