Not able to close the lid of laptop without it going to sleep

I have a 3000 V100 when I am use the external monitor connected to the port replicator when I close the lid the laptop will go to sleep. I have changed the setting for it not to go to sleep and it holds until I log out and log back in it changes them back. In fact I have checked if you change them click on apply and then OK and then check them again they have already change back.
I was told by support to upgrade the BIOS, Power Drive and Power management which have been done. I was then told this is the way it works unless you use your image. That does not make any sense. If you have a laptop an it is connected to Port replicator with a external monitor then why would you need the laptop cover open.
Is there a solution for this problem, if so what is it

Also [here|http://www.sapfans.com/forums/viewtopic.php?f=7&t=347230]
PeteA

Similar Messages

Not able to close the Org Period

Hi,
We recently upgrated from 11.5.10.2 to 12.1.3, and we are not able to close the org due to error in tables WSM_LOT_MOVE_TXN_INTERFACE and WSM_LOT_SPLIT_MERGES_INTERFACE. The records are getting reflected as 'Pending WSM interface' - Resolution Required.
These records are back dated, with year as 2007/2009 and for some Jul'11, for which period has been closed except Jul'11 which is - 'Closed not Summarized'.
Sample records are like
Pending Shop Floor Lot Split Merge Transactions WSM_LOT_SPLIT_MERGES_INTERFACE Resolution Required
Header Id Transaction Id Transaction Type,Transaction,Date,Transaction Reason,Reference,Lot,Process,Status,WIP,Flag,Split,Flag,Group Id Request Id Error Message,
1030,Lot Based Inventory,Translate,25-OCT-07 07-3547-B4 Error 2 1 1031 210415824 Invalid lot_number in Starting Lots,11547,Lot Based Inventory,Translate,25-OCT-07 07-3547-B4 Error 2 1 ,11548 211066708 Invalid lot_number in Starting Lots
Pending Shop Floor Lot Move Transactions WSM_LOT_MOVE_TXN_INTERFACE Resolution Required
587560686 2 12-MAR-09 09-4139-C1 Error 17200 50 END 999 END 20156699 290394731 Error:WSMPLBMI.MoveTransac
tion(stmt_num=240) :
Has any one faced same issues with OSFM/INV modules closing process ?
Regards
Adarsh K

Hi,
Please check the charecterstic of Book Area 01 in customization. If net book value has been maintained as negative, then you have to run depreciation to make it negative.
If depreciation for all asset has not been run a particular fiscal year then you cannot close the fiscal year.
Please check wheather depreciation for all additional assets has been run or not.
Hope you have understood.
Regards
Tapan

I'm not able to close the filefox or any tab in Firefox 28.0 v for sometime. It seems that i don't have control over it.

I'm not able to close the filefox or any tab in Firefox 28.0 v for sometime. It seems that i don't have control over it. Also if i'm watching any video not able pause it or move forward or use full screen.
While as i'm opening the same like in IE itz working fine.
I'm using firefox from past 5 years. Can u fix it as i temporary moved to chrome.

hello, i'm not sure what filefox is - can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

Is it ever "not safe" to close the lid with running programs?

I'm new to Apple (and loving it) but have a basic question about closing the lid. Is it safe to close the lid (entering sleep mode) when I am running a bunch of programs. Or should I shut down programs before closing the lid?

It depends on the nature of the applications. I certainly would not sleep a computer in the process of installing a program or performing an update. Sleeping a computer in the middle of a download or file transfer tends toward unintended negative consequences. This would also apply when in the middle of a backup.
The general rule I suppose is don't interrupt the performance of apps which are adding or changing files. Some do better than others at resuming the process after waking.

In iOS 7 , i am not able to close the newsstand app while it is running. Is it a bug?

I am using ipad with retina display. I have opened the newsstand app. When I tried to close it using my fingers, I am not able to do it after upgrading to iOS 7. Is it a bug?

try double clicking the home button and swiping the app up and off the screen. if that dosn't work thne you may want to try turning it off and on again.

I am not able to close the popup screen which i created using module pool

Hi,
I had written the following code in my PBO of the screen
PROCESS BEFORE OUTPUT.
MODULE status_0300.
MODULE call_list_0300.
PROCESS AFTER INPUT.
MODULE exit AT EXIT-COMMAND.
MODULE USER_COMMAND_0300.
*& Module call_list_300 OUTPUT
MODULE call_list_0300 OUTPUT.
LEAVE TO LIST-PROCESSING AND RETURN TO SCREEN 0.
SET PF-STATUS '300'.
SUPPRESS DIALOG.
PERFORM get_document_text.
ENDMODULE.
*& FORM get_document_text.
FORM get_document_text.
ENDFORM
when i execute... since the screen is directed to list processing, when i click the close button the popup window is not getting closed
what should i do to close the list processing screen

If your screen is popup screen than your PF-Status must be type of "Dialog Box".
Than you will get the buttons at the bottom part of your pop-up which will allow you to interact with your PAI.
Regards,
Naimesh Patel

Adf table with detail stamp , not able to close the detail stamp

Hi
i'm using 11g adf jdeveloper.
I'm using adf table to display records of XXXVO.In table i have used detail stamp, in which i have drag XXXVO read-only form and used a ADD button which call a pop-up with createInsert of the XXXVO form with submit button.In pop i have used a drop downlist of other YYYVO. I have used another button Edit which call the same pop-up, using show pop-up.
Issue is when i run the application i can open the detail stamp and close but i couldn't get the selected record on the table in edit mode pop up. if i give partial trigger in pop-up of table id . den i'm getting the selected record in edit pop up. but detail stamp is not working .
Here is the code .......
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1">
<af:messages id="m1"/>
<af:form id="f1">
<af:pageTemplate viewId="/XBBaseTemplate.jspx"
value="#{bindings.pageTemplateBinding}" id="pt1">
<f:facet name="body">
<af:panelBox text="AMC Charges" id="pb1">
<f:facet name="toolbar"/>
<af:panelGroupLayout layout="scroll" id="pgl1">
<af:panelCollection id="pc1"
inlineStyle="width:1105px; height:336px;">
<f:facet name="menus">
<af:menu text="Export Excel" id="m2">
<af:commandMenuItem text="Excel" id="cmi1">
<af:exportCollectionActionListener exportedId="resId1"
type="excelHTML"/>
</af:commandMenuItem>
</af:menu>
</f:facet>
<f:facet name="toolbar">
<af:toolbar id="t1">
<af:commandToolbarButton id="ctb1"
icon="/Images/browse.gif"
shortDesc="Search"
partialTriggers="resId1"
disabled="#{UsapProgramPrivilege.query}">
<af:showPopupBehavior popupId=":::p2"/>
</af:commandToolbarButton>
<af:commandToolbarButton id="ctb_add"
icon="/Images/addsymbol.png"
shortDesc="Add"
action="#{MasterManagedBean.createRecord}"
useWindow="true"
windowModalityType="applicationModal"
windowHeight="300"
windowWidth="300"
disabled="#{UsapProgramPrivilege.insert}"/>
<af:commandToolbarButton
id="ctb2"
partialTriggers="resId1"
icon="/Images/update_ena.png">
<af:showPopupBehavior popupId=":::p_edit"/>
</af:commandToolbarButton>
<af:commandToolbarButton id="ctb_delete"
icon="/Images/delete_ena.png"
shortDesc="Delete"
partialTriggers="resId1"
actionListener="#{bindings.Delete.execute}"
disabled="#{UsapProgramPrivilege.delete}"/>
<af:commandToolbarButton id="ctb3"
icon="/Images/filesave.png"
shortDesc="Save"
partialTriggers="resId1 ctb_add ctb_delete :::cb1"
actionListener="#{bindings.Commit.execute}"
disabled="#{!bindings.Commit.enabled}"/>
<af:commandToolbarButton id="ctb5" icon="/Images/undo.png"
actionListener="#{bindings.Rollback.execute}"
disabled="#{!bindings.Rollback.enabled}"
immediate="true">
<af:resetActionListener/>
</af:commandToolbarButton>
<af:commandToolbarButton id="ctb4"
icon="/Images/eraser-4.gif"
shortDesc="Clear"
action="#{MasterManagedBean.onClearTableSearchFields}"/>
<af:outputText value="CmmAmcRatesVO1Iterator"
id="ot_amciterator"
binding="#{MasterManagedBean.iteratorName}"
visible="false"/>
</af:toolbar>
</f:facet>
<f:facet name="statusbar"/>
<af:table value="#{bindings.CmmAmcRatesVO1.collectionModel}"
var="row"
rows="#{bindings.CmmAmcRatesVO1.rangeSize}"
emptyText="#{bindings.CmmAmcRatesVO1.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.CmmAmcRatesVO1.rangeSize}"
rowBandingInterval="0"
filterModel="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
filterVisible="true" varStatus="vs"
selectedRowKeys="#{bindings.CmmAmcRatesVO1.collectionModel.selectedRow}"
selectionListener="#{bindings.CmmAmcRatesVO1.collectionModel.makeCurrent}"
rowSelection="single" id="resId1"
binding="#{MasterManagedBean.masterTable}"
styleClass="hieght:100% width:100%"
columnSelection="multiple" width="1099"
rowDisclosureListener="#{MasterManagedBean.onRowDiscloseureEvent}"
partialTriggers="::ctb_add ::ctb_delete ::::cb1">
<af:column sortProperty="AmrtPrdId" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtPrdId.label}"
id="resId1c1">
<af:outputText value="#{row.AmrtPrdId}" id="ot8"/>
</af:column>
<af:column sortProperty="AmrtFeeId" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtFeeId.label}"
id="resId1c2">
<af:outputText value="#{row.AmrtFeeId}" id="ot7"/>
</af:column>
<af:column sortProperty="AmrtRateTyp" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtRateTyp.label}"
id="resId1c3">
<af:outputText value="#{row.AmrtRateTyp}" id="ot11"/>
</af:column>
<af:column sortProperty="AmrtFxdAmt" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtFxdAmt.label}"
id="resId1c4">
<af:outputText value="#{row.AmrtFxdAmt}" id="ot3">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtFxdAmt.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="AmrtPerc" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtPerc.label}"
id="resId1c5">
<af:outputText value="#{row.AmrtPerc}" id="ot4">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtPerc.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="AmrtMinAmt" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtMinAmt.label}"
id="resId1c6">
<af:outputText value="#{row.AmrtMinAmt}" id="ot2">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtMinAmt.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="AmrtMaxAmt" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtMaxAmt.label}"
id="resId1c7">
<af:outputText value="#{row.AmrtMaxAmt}" id="ot9">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtMaxAmt.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="AmrtFolioId" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtFolioId.label}"
id="resId1c8">
<af:outputText value="#{row.AmrtFolioId}" id="ot1"/>
</af:column>
<af:column sortProperty="AmrtCurrId" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtCurrId.label}"
id="resId1c9">
<af:outputText value="#{row.AmrtCurrId}" id="ot10"/>
</af:column>
<af:column sortProperty="AmrtRndMthd" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtRndMthd.label}"
id="resId1c10">
<af:outputText value="#{row.AmrtRndMthd}" id="ot14"/>
</af:column>
<af:column sortProperty="AmrtDecPlc" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtDecPlc.label}"
id="resId1c11">
<af:outputText value="#{row.AmrtDecPlc}" id="ot5">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtDecPlc.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="AmrtActiveYn" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtActiveYn.label}"
id="resId1c12">
<af:outputText value="#{row.AmrtActiveYn}" id="ot13"/>
</af:column>
<af:column sortProperty="AmrtHoldYn" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtHoldYn.label}"
id="resId1c13">
<af:outputText value="#{row.AmrtHoldYn}" id="ot12"/>
</af:column>
<af:column sortProperty="AmrtEffFdate" filterable="true"
sortable="true"
headerText="#{bindings.CmmAmcRatesVO1.hints.AmrtEffFdate.label}"
id="resId1c14">
<f:facet name="filter">
<af:inputDate value="#{vs.filterCriteria.AmrtEffFdate}"
id="id1"/>
</f:facet>
<af:outputText value="#{row.AmrtEffFdate}" id="ot6">
<af:convertDateTime pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtEffFdate.format}"/>
</af:outputText>
</af:column>
<f:facet name="detailStamp">
<af:panelFormLayout id="pfl2" rows="9">
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtPrdId.label}"
id="plam10">
<af:outputText value="#{row.AmrtPrdId}" id="ot31"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtFeeId.label}"
id="plam17">
<af:outputText value="#{row.AmrtFeeId}" id="ot20"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtRateTyp.label}"
id="plam11">
<af:outputText value="#{row.AmrtRateTyp}" id="ot28"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtFxdAmt.label}"
id="plam18">
<af:outputText value="#{row.AmrtFxdAmt}" id="ot16">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtFxdAmt.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtPerc.label}"
id="plam14">
<af:outputText value="#{row.AmrtPerc}" id="ot30">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtPerc.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtMinAmt.label}"
id="plam1">
<af:outputText value="#{row.AmrtMinAmt}" id="ot22">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtMinAmt.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtMaxAmt.label}"
id="plam13">
<af:outputText value="#{row.AmrtMaxAmt}" id="ot18">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtMaxAmt.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtFolioId.label}"
id="plam7">
<af:outputText value="#{row.AmrtFolioId}" id="ot27"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtCurrId.label}"
id="plam4">
<af:outputText value="#{row.AmrtCurrId}" id="ot26"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtRndMthd.label}"
id="plam6">
<af:outputText value="#{row.AmrtRndMthd}" id="ot25"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtDecPlc.label}"
id="plam12">
<af:outputText value="#{row.AmrtDecPlc}" id="ot21">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtDecPlc.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtActiveYn.label}"
id="plam2">
<af:outputText value="#{row.AmrtActiveYn}" id="ot32">
<f:converter converterId="CharYNAsString"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtHoldYn.label}"
id="plam8">
<af:outputText value="#{row.AmrtHoldYn}" id="ot24">
<f:converter converterId="CharYNAsString"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.AmrtEffFdate.label}"
id="plam15">
<af:outputText value="#{row.AmrtEffFdate}" id="ot23">
<af:convertDateTime pattern="#{bindings.CmmAmcRatesVO1.hints.AmrtEffFdate.format}"/>
</af:outputText>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.FeeDescription.label}"
id="plam16">
<af:outputText value="#{row.FeeDescription}"
id="ot29"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.FolioDescription.label}"
id="plam9">
<af:outputText value="#{row.FolioDescription}"
id="ot17"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.ProductDescription.label}"
id="plam3">
<af:outputText value="#{row.ProductDescription}"
id="ot19"/>
</af:panelLabelAndMessage>
<af:panelLabelAndMessage label="#{bindings.CmmAmcRatesVO1.hints.CurrencyDescription.label}"
id="plam5">
<af:outputText value="#{row.CurrencyDescription}"
id="ot15"/>
</af:panelLabelAndMessage>
</af:panelFormLayout>
</f:facet>
</af:table>
</af:panelCollection>
</af:panelGroupLayout>
</af:panelBox>
</f:facet>
<f:facet name="first">
<af:panelStretchLayout id="psl3" startWidth="39px">
<f:facet name="bottom"/>
<f:facet name="center"/>
<f:facet name="start"/>
<f:facet name="end"/>
<f:facet name="top"/>
</af:panelStretchLayout>
</f:facet>
<f:facet name="top"/>
<f:facet name="Bticker"/>
</af:pageTemplate>
<af:popup id="p2">
<af:panelWindow id="pw1">
<af:panelGroupLayout id="pgl2">
<af:panelHeader text="AMC Rates" id="ph1">
<af:query id="qryId1" headerText="Search" disclosed="true"
value="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
model="#{bindings.ImplicitViewCriteriaQuery.queryModel}"
queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}"
queryOperationListener="#{bindings.ImplicitViewCriteriaQuery.processQueryOperation}"
resultComponentId="::pt1:pc1:resId1"
displayMode="compact"
/>
</af:panelHeader>
</af:panelGroupLayout>
</af:panelWindow>
</af:popup>
<af:popup id="p_edit" popupCanceledListener="#{MasterManagedBean.resetPopTitle}"
partialTriggers="pt1:pc1:resId1">
<af:panelWindow id="pw2" inlineStyle="width:600px; height:600.0px;"
title="Edit"
binding="#{MasterManagedBean.masterPenalWindow}">
<af:panelGroupLayout id="pgl3">
<af:panelFormLayout id="pfl4" rows="2" maxColumns="2">
<af:inputListOfValues id="amrtFeeIdId"
popupTitle="Search and Select: #{bindings.AmrtFeeId.hints.label}"
value="#{bindings.AmrtFeeId.inputValue}"
label="#{bindings.AmrtFeeId.hints.label}"
model="#{bindings.AmrtFeeId.listOfValuesModel}"
required="#{bindings.AmrtFeeId.hints.mandatory}"
columns="#{bindings.AmrtFeeId.hints.displayWidth}"
shortDesc="#{bindings.AmrtFeeId.hints.tooltip}">
<f:validator binding="#{bindings.AmrtFeeId.validator}"/>
</af:inputListOfValues>
<af:inputListOfValues id="amrtPrdIdId"
popupTitle="Search and Select: #{bindings.AmrtPrdId.hints.label}"
value="#{bindings.AmrtPrdId.inputValue}"
label="#{bindings.AmrtPrdId.hints.label}"
model="#{bindings.AmrtPrdId.listOfValuesModel}"
required="#{bindings.AmrtPrdId.hints.mandatory}"
columns="#{bindings.AmrtPrdId.hints.displayWidth}"
shortDesc="#{bindings.AmrtPrdId.hints.tooltip}">
<f:validator binding="#{bindings.AmrtPrdId.validator}"/>
</af:inputListOfValues>
<af:inputText value="#{bindings.FeeDescription.inputValue}"
required="#{bindings.FeeDescription.hints.mandatory}"
columns="#{bindings.FeeDescription.hints.displayWidth}"
maximumLength="#{bindings.FeeDescription.hints.precision}"
shortDesc="#{bindings.FeeDescription.hints.tooltip}"
partialTriggers="amrtFeeIdId" id="it10"
readOnly="true">
<f:validator binding="#{bindings.FeeDescription.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.ProductDescription.inputValue}"
required="#{bindings.ProductDescription.hints.mandatory}"
columns="#{bindings.ProductDescription.hints.displayWidth}"
maximumLength="#{bindings.ProductDescription.hints.precision}"
shortDesc="#{bindings.ProductDescription.hints.tooltip}"
partialTriggers="amrtPrdIdId" id="it7"
readOnly="true">
<f:validator binding="#{bindings.ProductDescription.validator}"/>
</af:inputText>
</af:panelFormLayout>
<af:panelFormLayout id="pfl6" rows="2" maxColumns="2">
<af:inputListOfValues id="amrtFolioIdId"
popupTitle="Search and Select: #{bindings.AmrtFolioId.hints.label}"
value="#{bindings.AmrtFolioId.inputValue}"
label="#{bindings.AmrtFolioId.hints.label}"
model="#{bindings.AmrtFolioId.listOfValuesModel}"
required="#{bindings.AmrtFolioId.hints.mandatory}"
columns="#{bindings.AmrtFolioId.hints.displayWidth}"
shortDesc="#{bindings.AmrtFolioId.hints.tooltip}">
<f:validator binding="#{bindings.AmrtFolioId.validator}"/>
</af:inputListOfValues>
<af:inputListOfValues id="amrtCurrIdId"
popupTitle="Search and Select: #{bindings.AmrtCurrId.hints.label}"
value="#{bindings.AmrtCurrId.inputValue}"
label="#{bindings.AmrtCurrId.hints.label}"
model="#{bindings.AmrtCurrId.listOfValuesModel}"
required="#{bindings.AmrtCurrId.hints.mandatory}"
columns="#{bindings.AmrtCurrId.hints.displayWidth}"
shortDesc="#{bindings.AmrtCurrId.hints.tooltip}">
<f:validator binding="#{bindings.AmrtCurrId.validator}"/>
</af:inputListOfValues>
<af:inputText value="#{bindings.FolioDescription.inputValue}"
required="#{bindings.FolioDescription.hints.mandatory}"
columns="#{bindings.FolioDescription.hints.displayWidth}"
maximumLength="#{bindings.FolioDescription.hints.precision}"
shortDesc="#{bindings.FolioDescription.hints.tooltip}"
partialTriggers="amrtFolioIdId" id="it9"
readOnly="true">
<f:validator binding="#{bindings.FolioDescription.validator}"/>
</af:inputText>
<af:inputText value="#{bindings.CurrencyDescription.inputValue}"
required="#{bindings.CurrencyDescription.hints.mandatory}"
columns="#{bindings.CurrencyDescription.hints.displayWidth}"
maximumLength="#{bindings.CurrencyDescription.hints.precision}"
shortDesc="#{bindings.CurrencyDescription.hints.tooltip}"
partialTriggers="amrtCurrIdId" id="it3"
readOnly="true">
<f:validator binding="#{bindings.CurrencyDescription.validator}"/>
</af:inputText>
</af:panelFormLayout>
<af:panelFormLayout id="pfl1" rows="5" fieldWidth="150">
<af:selectOneChoice value="#{bindings.AmrtRateTyp.inputValue}"
label="#{bindings.AmrtRateTyp.label}"
required="#{bindings.AmrtRateTyp.hints.mandatory}"
shortDesc="#{bindings.AmrtRateTyp.hints.tooltip}"
id="soc1">
<f:selectItems value="#{bindings.AmrtRateTyp.items}"
id="si1"/>
</af:selectOneChoice>
<af:inputText value="#{bindings.AmrtFxdAmt.inputValue}"
label="#{bindings.AmrtFxdAmt.hints.label}"
required="#{bindings.AmrtFxdAmt.hints.mandatory}"
columns="#{bindings.AmrtFxdAmt.hints.displayWidth}"

See if this helps:
http://blogs.oracle.com/shay/2010/03/popup_details_for_a_table_reco.html

Using Firefox, when I open Google, e.g., and go to a website, I am not able to close the site without closing Firefox first and then closing all tabs. I would like to keep Firefox open. How do I close the site and then Google?

All details are contained in the question.

Hi,
Please check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

Laptop shuts down when I close the lid

I just recently purchased an HP Pavilion x360. It was working fine until HP did an update and now everytime I close the lid, the computer shuts down and has to restart when I open it. I've checked all of the power settings, including the one that allows you to specify what it should do when I close the lid but having found nothing that helps. Any suggestions? Robby

Hi Robby, Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I understand that before you did a HP update you were able to close the lid and reopen without Windows restarting, but no longer.You have checked the power management setting and the option for what happens when you close the lid, but no change. I suggest you do a scan for corrupted files. This process will also try to repair any corrupted files it locates.Go to the command prompt and right click on it and run as administratorType sfc /scannow and press enterWait for this to complete and restart your notebook. Windows 8 has a built in troubleshooter you could also try.Press the Windows key + C to open charmsType troubleshoot performance and press enter.Follow the on screen prompts. If that did not help. you can do a restore back to before you installed the update. You also have the optiion to do a Refresh Your PC to Resolve Problems (Windows 8). To be on the safe side I would backup your personal data first, to ensure no personal data is lost. You could also do a recovery back to factory. Performing an HP System Recovery (Windows 8). You will receive a prompt to backup your personal files to prevent data loss, if you have not done one recently, I suggetst you do one now.Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8) With the notebook being a fairly recent purchase, you could also contact HP support for assistance. They can remotely log onto your system to aid with locating and resolving issues. Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region HP Technical Support Sitemap.

Changing what happens when the I close the lid?

I recently switched from Windows to a 13" MacBook Pro. I really like my MacBook, however, I was wondering if there was a way to set what the computer does when I close the lid (i.e. instead of going to sleep is there a way to tell it to just stay on and shut off the display)? I do work in the theatrical market and also a lot of video editing and would like to be able to start a process and then close the lid and allow it to run while I am away from the computer. Any help or suggestions would be appreciated.

This idea sounds highly inadvisable from the heat point of view - with a processor-intensive activity like handling video you are asking to overheat the laptop if the lid is closed.
MaxBooks are designed to be able to run when closed,so overheating should not be a proble if the MacBook ventilation is not blocked.
<http://support.apple.com/kb/ht3131>

After updating my mac, I can no longer close the lid without it going into a sleep mode, that I can only wake by powering off.

Ever since I have updated my Macbook Pro to the newest version of OS, it will go into a sleep mode when I close the lid that I can only wake with powering off the entire computer. I used to be able to close the lid for the night, open it in the morning, and it would be like I never even left it overnight. Now I try to wake it up with pushing everything possibe. Is this new to the update? I even tried to set the settings to "never sleep". Help!

Try Reset SMC.
http://support.apple.com/kb/HT3964
Choose the method for:
'Resetting SMC on portables with a battery you should not remove on your own'.
Hope this helps.

Won't sleep when I close the lid - HELP!

A while ago, my iBook G4 1GHz was knocked off of a table. The display was smashed and the whole display assembly was destroyed. I bought a new (used) display assembly and installed it. Worked fine, but when I closed the lid, the iBook woudn't sleep. I checked the placement of the magnet in the top case and I reset the PMU. Still no sleep. So I contacted the company that sold me the display and got a different one. Still won't sleep when I close the lid. I checked all of the energy settings, reset the PMU and even tried to force sleep with a magnet from another broken iBook. Still no sleep when I close the lid. It will sleep when I choose sleep from the Apple menu (OS Tiger) and when it sits for a while with the lid open, but not when I close the lid. Any thoughts?

My original problem has not been solved. The iBook still won't go to sleep when I close the lid. I have checked out any possible software causes, and have ruled them out. I have checked to make sure no keys were being pressed when I closed the lid. I took a magnet from another iBook top case and ran it down the side of the display to try to force sleep. No effect. I don't have any Firewire or USB devices attached, to that's not it. Apple, this board, PBFixit.com, and my local Apple-affiliated repair center have no idea why I am having this problem. Two display assemblies have experienced this problem. The original display had been destroyed in a drop. Could some internal damage, like maybe to the logic board, result in such a problem? It's odd that I am the only person out there who has had this problem. Weird, to be sure.

Not able to closing the maintenance cycle of charm

Hi Team
I am not able to close the maintenance cycle of charm.
I had already tried with the phase utility report, I had checked my all authorizations and it is fine.
I had gone through most of SCN queries for same, current phase of project cycle is completed however. Not able see the any error logs in SLG1.
Regards
Harsh

Hi Rishav,
We had resolve the issue as now we are able to close the cycle successfully,
But new CTS project is not being generated, Any idea, should we need to check this with SAP again.
B R
Harsh

Keeping it awake when I close the lid

Hello,
I want to be able to close the lid on my MacBook Pro,
yet still keep the system on, so if I get an email I can hear the alert sound.
Right now when I close the lid, I lose internet connection, so i'm assuming that the system goes to sleepff, or something.. When I open it again, it awakens, but i have to log into my email again.
Can i keep it "on" with internet "on" too, even though the lid is closed?
if so, how?
thank you

You can try a product like SleepLess…
http://www.versiontracker.com/dyn/moreinfo/macosx/17893
… or InsomniaX…
http://www.versiontracker.com/dyn/moreinfo/macosx/30315
Otherwise, you can go really low tech and do something which I did when I used a PowerBook as a server which was to wedge an eraser between the base and the display. It just propped it open nicely.

I've connected my macbook pro (os 10.6.8) to an external display, but it will not go into clam shell mode! When I close the lid the laptop goes to sleep, and I am unable to wake it using the external keyboard or mouse.

A rundown of what I've tried:
Adjusting energy settings to try to prevent sleep
Pluging the USB keyboard and wacom tablet directly into the laptop (as opposed to a usb hub)
My laptop's power cable is connected
My display (a Vizio TV) is recognized in the System Preferences panel
I'd been using this TV for about a year with my older Macbook Pro (OS 10.5.8), though using a different wireless keyboard and mouse
***Update: The issue seems to lie with the keyboard and wacom tablet. I am trying to use a wireless Case Logic keyboard (with dongal) and wired wacom tablet to wake the Macbook Pro in clamshell mode. To experiment, I tried using my Logitech wireless keyboard & mouse set (also dongal) that I had been using before and it wakes the computer without any problems! However, I really need to be able to use my wacom tablet. If I switch to the tablet after waking the computer using the Logitech keyboard & mouse it works, but once the computer sleeps it won't work anymore. I could keep switching back and forth I suppose, but it's sort of a pain. There has to be an easier way! Any ideas why the wired wacom tablet is unable to wake the computer in clamshell mode?
Thanks!

So your keyboard or mouse won't wake the Mac when you close the lid correct? Try resetting the SMC and pram
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Not able to close the lid of laptop without it going to sleep

Similar Messages

Maybe you are looking for