Not able to comapre roles in DEV and QAS using SUIM?

Hi,
I am trying to compare role in both DEV and QAS, DEV and PRD using SUIM t-code.
While comapring its showing that roles are in different systems, not able to comapre.
Actually role exisitng in both QAS and PRD.
Individually I can login to QAS, PRD can see the role.

For role comparision both the roles must be in the same system, in same client
Transaction code SUIM -> Comparision-> Roles
If the roles are in different system, then tranport the role into one of the system and do comparision. If no transport connection defined then, you can use the upload and download option in the PFCG
comparing
Run the t-code SUIM
Go To Comparison and select the option of roles
Click on Across systems option it will give option to select the sys name under Remote Comparison there enter the SYS ID between which system you want to do comparison and put the role name in compare role section then execute it will give you the result.
If there is any difference b/wn the t-codes it will b in red colour otherwisein yellow.

Similar Messages

BI Publisher - SuperUser not able to acces Roles and Permission Page

I have set up the BI Publisher as said in http://gerardnico.com/wiki/dat/bip/configuration_bip.
But
1. SuperUser is not able to access Roles and Permission.
2. I'm not able to access the BI Answers Catalog.
I also have a doubt about the BI Server Admin. Is it the RPD Admin?
Kindly Help

I have set up the BI Publisher as said in http://gerardnico.com/wiki/dat/bip/configuration_bip.
But
1. SuperUser is not able to access Roles and Permission.
2. I'm not able to access the BI Answers Catalog.
I also have a doubt about the BI Server Admin. Is it the RPD Admin?
Kindly Help

What is CTS ? what is the role of CTS in between DEV and QAS?

Dear
What is CTS ? what is the role of CTS in between DEV and QAS?
Thanx & Regards
Mohamamd Nabi
[email protected]

hello, friend.
actually, you can search for subjects like this in the threads archive. you will be pleasantly surprised to find that there are already many threads with similar issues and that you can find answers to even more otherwise unrealized questions. and you don't have to wait for anyone to reply.
it looks like the issue is urgent for you, and this is why i am attaching this feed from Sadhu Kishore, which was posted some time ago... (if he replies to your thread, you may choose to award him points).
"Hi,
The transport workflow provides a framework for transporting enhancements or new developments of existing business functions in a system landscape. It provides a direct connection between development and transport administration. The transport workflow manages the transport process, determines the user for each individual step automatically, and then displays an interface which they can use to perform the task directly.
It is an efficient method of transporting a selected number of requests into a group of transport targets, and uses clearly defined approval steps to ensure the quality of your target systems. The requests can be transportable change requests, Customizing requests, relocation transports or transports of copies. The transport targets do not need to be located on defined transport routes. However, the transport workflow can involve some risks, caused by the dependencies between transport requests:
Import sequence
It is important that you import requests in the correct order, so that development work is up-to-date in the target system.
Incompleteness
It is important that the functions transported in the transport proposal are complete; otherwise errors may occur in the import system.
A request is not imported, but it contains an important data element. You use another request to transport a table that references this data element. Since the referenced data element does not exist in the target system, activation errors will occur when you import the second request.
The transport workflow is a generic workflow. Its ability to process the transport route configuration in TMS enables it to adapt itself to any system landscape. This means you can transport multiple requests into multiple targets, even if these targets are not located on the transport routes.
This reduces the amount of work for the transport administrator significantly. The automated nature of the workflow also reduces the likelihood of errors during transports.
You can use the transport workflow in two different ways.
Transport workflow as a transport strategy
If you have production systems in your landscape that can only accept approved transports, we recommend that you use the transport workflow to organize and coordinate the transport process.
To do this, set Workflow-controlled transports as your transport strategy and configure the transport workflow.
When you release a transport request, the transport workflow starts automatically and the screen Create Transport Proposal appears. The requests are then released implicitly when the transport proposal is sent to the transport administrator.
Special transport workflow (mass transports)
You can use the special transport workflow to make transports that do not follow the defined transport routes or that take place outside the normal transport schedule (part of the mass transport strategy). These transports may be corrections made in the development system that have to be transported into the production system without delay.
To use the special transport workflow, set Mass transports as your transport strategy and configure the transport workflow."
thanks. you have been most generous.
regards.

Role difference in DEV and QAS?

Hi
I made some changes to role in DEV and moved to QAS.
Whatever changes I made in DEV, are reflecting in QAS, But SUIM comaprision of roles, it's showing 3 objects are existing in DEV, but not there in QAS.
I opened the role in DEV, tried to find these objects.
Actually these 3 objects not at all existing in DEV also.
Then why in SUIM comaprison it's showing these 3 objects existing in DEV, not QAS.
Cheers
Sreenivasu Balaka

Hi Sreenivasu,
maybe the cause is the same as you have mentioned in Profile not generated in QAS even though same as DEV? ....
Try first to generate both profiles in DEV and QAS. run the compare then again....
Still some differences?
b.rgds, Bernhard

Not able to get the minimize maximized and close button and its running with full screen mode.

Hi
My Thunderbird is running with ubuntu OS and while using some shortcut key my thunderbird mailbox switched to full screen mode. now i am not able to resize it's view and also not able to see minimize, maximize and close buttons on top left corner.
Please help me out.
Thanks

I'm also running Ubuntu. Not sure how you got there, but you can try a Control-Q to quit. Then restart it and hope in comes back normal.

Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.

Probably will never ever think of buying a locked phone from AT&T cause its one of the worst system integrations ever that these companies could think of.
The entire problem started when I put in a request with at&t to unlock my iphone 4s (ios7) which did get approved. I performed the entire instructions they asked me to do, which is to backup and restore. After doing those instructions my iphone gave me an error message below
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Basically saying that at&t hasn't still unlocked the iphone which a really helpful apple executive was able to confirm. I initiated another unlock process from at&t in order to unlock the iphone, just to be sure that its not something wrong from my end. The nice at&t lady stayed on chat with me to unlock the iphone step my step while I was calling the apple tech too. And the apple tech confirmed again that the iphone is locked to at&t.
Now, just a few minutes ago I tried another restore to see if any progress is being made and to my surprise I got an error message saying
Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.
I feel like I am just going around these two different "money hogger" companies which set certain rules and regulations to screw a regular phone buyer. I purchased this iphone in USA and trying to unlock in India, is it really this hard to simply unlock a device.
For now I am going to try to call a apple office in india (apprently we don't have very many out here) and see if they can help me. But any other assistance regarding unlocking an iphone 4s would be helpful. I have however, tried checking IMEI.info, called up apple, talked to at&t (which always say go talk to apple) I do have a case number from apple as well in case an apple executive reads this discussion forum (case number: 566383594)
Thanks

You got a confirmation from AT&T that it was authorized. Is this correct? - Yes i did get an email authorization on the 21st.
Then you connected the phone to a computer with the latest version of iTunes installed. You clicked on the phone's name in iTunes, then clicked "Backup Now". - Yes
When that finished you clicked "Restore iPhone" (NOT "Restore Backup") - Yes
Are you with me so far? - Yes.
And @ Varjak is right that after the 3rd restore I get the replacement error.
Plus I have NEVER jailbroken the iPhone. To give you another update, I spoke to a really nice apple tech in India who was atleast able to get me out of the replacement error by doing a recovery mode option. However, the lastest restore still gives me the same error
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Message was edited by: jabgars

I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification until and unless i activate the "Show on Lock Screen" which was not same as in the earlier software version.Help plz

I'm using Iphone 5 .After updating it with the latest software i.e iOS 7.0.6 I'm not able to see the wats app and imsg on my notification center when my phone is locked until and unless i activate the "Show on Lock Screen" under each application. which was not same as in the earlier software version.I dnt want my messages or watsapp msges to be displayed on home screen when locked but should be displayed on the notification center on lock condition.
Please suggest a solution or @Apple please get a software release which can remove this bug .

We aren't Apple, just users like you. Have you tried a reset? Hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss)

Not able to see Beat Audio software and mute light not glowing on fresh windows 8

Hi,
I am using Laptop : HP ENVY 4 1046tx. I have installed fresh windows 8 on it. After that I have downloaded audio software from HP software site but that driver is not accepting.
1. I am not able to see Beat Audio software and equalizer setting in control pannel.
2. When I am pressing mute button mute light (red light) is not glowing on button
Thanks,
Prabhat
This question was solved.
View Solution.

Try the IDT Audio driver here:
http://ftp.hp.com/pub/softpaq/sp58501-59000/sp58635.exe
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

HT4972 2nd generation ipod touch is pretty much no good anymore? It is not able to upgrade to iOS5.1 and so will not work with many of the Apps now available in the App store. Is there any way to find out which apps will work with 2nd generat

2nd generation ipod touch is pretty much no good anymore? It is not able to upgrade to iOS5.1 and so will not work with many Apps in the iTunes store? Is there a way to find out if the App will work before you download?

Look to the app developer to provide that information when browsing the iTunes Store.
The iPod Touch still works, so what's your problem with it? It still works with older apps, it still does what it's intended to do.
If you aren't happy then sell it and buy a new one.

Not able to edit the words "chapter" and "section" in the document workflow

Hi all,
I would like to point out something that could be a bug. The 2 words "chapter" and "section" are not editable in the document workflow: I can just change the title for each chapter and the title for each section, but I am not able to change the words "chapter" and "section".
The problem is, iBooks Author is using the words "chapter" and "section" (heading 1) to build the TOC: if I am using iBooks Author in English, but I am writing a text in French, I am not able to change "Chapter" into "Chapitre". The only way to go, what I found out, is to close the app, change the OSX Lion system language, log out, re-open iBooks Author and start a new book: opening an English book in the French version of iBooks Author will not change automatically the language in the workflow.
Does anybody has a trick to edit the words "chapter" and "section"?
Best regards,
Mauro

Hi KT,
Thank you, but it's still in english.
I changed to "only number", then wrote the word "chapter" in french or italian or german before the number, then deleted the preview on the iPad and made a new preview, I still have the same result: the word "chapter" is still in the language of the app.
To be clear: I am writing a text using iBooks Author in italian. I have to translate the same text in french, the fastest way would be to rework the italian version (I already have all the multimedia stuff inside). I changed the italian word "Capitolo" (chapter) to the french one "Chapitre" (using the advices of AodhFFXI and K T). And for the first slide of the chapter that's fine.
But if I "close down" the first chapter slide or if I click on the top left botton to go to the chapter TOC, there I still have the word in italian, even if the word has been deleted in the layout:

We have migrated data from virsa 4.0 to grc 10.1, all virsa mitigation approvers and controllers got migrated but we are not able to map new mitigation approver and controller to the mitigation ids.

Hello All,
We have migrated data from virsa 4.0 to grc 10.1, all virsa mitigation
approvers and controllers got migrated but we are not able to map new
mitigation approver and controller to the mitigation ids.
The steps we have done below.
1. We have created user id in su01 with necessary authorizations
2. we have declared this user id in Access control owners as a
mitigation approver and assigned to the organization unit
Now we are trying to map to newly created mitigation approver to the
mitigation id but we are not able to find that approver id for the mitigation ids. (only old mitigation ids came from VIRSA only we are able to see, not able to add new mitigation approvers / controllers to the mitigation ids)
Kindly check this issue, this is very critical for us.
Thanks in advance.
Regards,
Karunakar

Hi Karunakar,
- Assign Owners to Organization unit
- Make these owners as Mitigation Approver and Monitor
- Create Mitigation Id in this Org. unit
Regards
plaban

I have US$8 cents left in my account. I have moved to Canada and brought a $50 Canadian prepaid card. I am not able to redeem my C$50 until I use up the US$cents. However I could not find anything on app store cost 8cents.anyway I can get rid the8cent

I have US$8 cents left in my account. I have moved to Canada and brought a $50 Canadian prepaid card. I am not able to redeem my C$50 until I use up the US$cents. However I could not find anything on app store cost 8cents.anyway I can get rid the 8 cent so that I can top up the $50 canadian prepaid credit

Click here and request assistance.
(65561)

I am not able to download mp4 files (video and audio) to iTunes since I updated to iTunes 11. Thanks for your help.

I am not able to download mp4 files (video and audio) to iTunes since I updated to iTunes 11. Thanks for your help.

Thank you for clarifying. Your question is in your browser, not in iTunes. Each download link is different, and it has nothing to do with the File menu. You can save media files by secondary-clicking on the link to the media file and selecting Save File to "[your downloads folder".

Hello, I'm not able to download itunes 10.5 on my dell laptop. It says that an error occured and to download separately and then install. However, this is stillnot working. Due to this I am not able to update any applications. I am using windows vista.

Hello, I am not able to download itunes 10.5 on my dell laptop. It says to try to download separately and then install. However, an error message still comes up. Due to this, I am not able to update any applications. I am using windows vista. If I reinstall itunes entirely, will I loose my many playlists that I have? And will this effect the same playlist that I have on my ipod???

Installing, and uninstalling, applications never touches or removes the data.
Clean out and uninstall all the apple programs and software thru Programs and manually.
Might want to use Revo and CCleaner
I always use manual standalone installers (and keep a couple backup versions)
itunes 10.5 may affect iTunes media playlists, not sure, depends on what you have.
A search of these forums will show some threads.
I'd clean up vista, you need SP2 or later, and specific error message?
I wonder as you arenot the first with a dell if maybe the OS or included software.
Security programs like Norton and older versions of Kaspersky have been implicated.
Also settings in IE that affect pop-ups and plug-ins.

There was start up glitch on desktop, which changed the computers configuration, which requires activation on Adobe Photoshop CS, but am not able to get throug activation system and phone support has been disconnected.

here was start up glitch on desktop, which changed the computers configuration, which requires activation on Adobe Photoshop CS, but am not able to get throug activation system and phone support has been disconnected. How should I activate my software.

You are entitled to the CS2 version that will work without activation, since the activation servers were taken offline. Read the instructions and follow them on this page.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

Not able to comapre roles in DEV and QAS using SUIM?

Similar Messages

Maybe you are looking for