Not able to complete an installation of workflow manager 1.0

I'm currently trying to install workflow manager 1.0 on a virtual machine Windows Server 2012 hosted in Azure.
SharePoint 2013 is running fine on this machine (I have two others VM: DC and SQL server).
I start Web Platform installer and select Workflow Manager. The download is ok but the installation seems to be frozen at the first step. Nothing happens after 3 hours.
I have also tried the offline installation but same problem, here is what appears in the command line window since 2 hours:
Starting Installation
Started downloading products...
Started downloading: 'Workflow Client 1.0'
Started installing Products...
Downloaded: 'Workflow Client 1.0'
Started installing: 'IIS: Management Service'
Started downloading: 'Microsoft Windows Fabric V1 RTM'
Downloaded: 'Microsoft Windows Fabric V1 RTM'
Started downloading: 'Service Bus 1.0'
Downloaded: 'Service Bus 1.0'
Started downloading: 'Workflow Manager 1.0'
Downloaded: 'Workflow Manager 1.0'
I do the installation Under administrator account...
Do you have an idea how to solve this issue?
Thanks for your help

Hi,
According to your post, my understanding is that you failed to install workflow manager 1.0.
Please make sure you install Workflow Manger correctly. You can refer to:
Install and configure workflow for SharePoint Server 2013
In addition, please check the hosts file on the machine on which installation is being performed. If there are any loopback entries to a localhost IP in the hosts file, comment or remove them temporarily and retry configuration.
Here is a similar blog for you to take a look at:
http://lennytech.wordpress.com/2013/06/02/troubleshooting-configuration-problems-with-workflow-manager-and-service-bus/
More information:
Known Issues in Workflow Manager 1.0
Troubleshooting Workflow Manager 1.0 Management and Execution
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Similar Messages

Not able to complete CUCM 8.6 installation in esxi

HI
I am not able to complete cucm 8.6 installation on my esxi server, i am getting attached error while installing. please help on this .
Thanks
Shijo

Are you using the OVA template from Cisco? If not try using that.
Below are the requirements for 8.6:
http://docwiki.cisco.com/wiki/Virtualization_for_Cisco_Unified_Communications_Manager_%28CUCM%29#Version_8.6.28x.29
http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware#Processors_.2F_CPUs
-Terry

To download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

to download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Do they launch OK while in Safe Mode?

Not able to complete installing Flash Player 11.9.900.117

about 50% installation, "error mssg: pls close webplayer and continue" despite no program was running during installation. tried all steps but problem still perists. treid unistall but not able to complete uninstall, same error "close webplayer and continue"
Thanks.

Windows or Mac?
What browser?

Help needed: "Logic was not able to complete the download"

I purchased Logic Pro 9 today from App store. Downloaded and installed the software. After installation & startup Logic started to download 2GB of additional content. This download was interrupted by the message "logic was not able to complete the download". I trashed Logic, redownloaded and reinstalled it several times from App store, always gives same message after startup. Doesn't even start to download basic content again, just gives the message. After hitting "ok" Logic just quits. This is extremely frustrating and I have no idea what to do about this.
I would very much appreciate any advice about how to solve this problem!

I start with the same problem but it ends differently.
I purchased Logic Pro 9 today from App store. Downloaded and installed the software. After installation & startup Logic started to download
the basic content. Upon startup the program already seemed weird, but it started and finished the basic content.
By weird I mean all I get on my screen is the Logic menu bar and the text is yellow instead of black. To top it all up, the text from the menus is missing and all I get is empty boxes.
I have deleted it and reinstalled from the app store to ensure a new clean installation but still the problem persists.
I have checked all your above points as well and none seem to work would be grateful for any help.
Cheers

Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.

Probably will never ever think of buying a locked phone from AT&T cause its one of the worst system integrations ever that these companies could think of.
The entire problem started when I put in a request with at&t to unlock my iphone 4s (ios7) which did get approved. I performed the entire instructions they asked me to do, which is to backup and restore. After doing those instructions my iphone gave me an error message below
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Basically saying that at&t hasn't still unlocked the iphone which a really helpful apple executive was able to confirm. I initiated another unlock process from at&t in order to unlock the iphone, just to be sure that its not something wrong from my end. The nice at&t lady stayed on chat with me to unlock the iphone step my step while I was calling the apple tech too. And the apple tech confirmed again that the iphone is locked to at&t.
Now, just a few minutes ago I tried another restore to see if any progress is being made and to my surprise I got an error message saying
Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.
I feel like I am just going around these two different "money hogger" companies which set certain rules and regulations to screw a regular phone buyer. I purchased this iphone in USA and trying to unlock in India, is it really this hard to simply unlock a device.
For now I am going to try to call a apple office in india (apprently we don't have very many out here) and see if they can help me. But any other assistance regarding unlocking an iphone 4s would be helpful. I have however, tried checking IMEI.info, called up apple, talked to at&t (which always say go talk to apple) I do have a case number from apple as well in case an apple executive reads this discussion forum (case number: 566383594)
Thanks

You got a confirmation from AT&T that it was authorized. Is this correct? - Yes i did get an email authorization on the 21st.
Then you connected the phone to a computer with the latest version of iTunes installed. You clicked on the phone's name in iTunes, then clicked "Backup Now". - Yes
When that finished you clicked "Restore iPhone" (NOT "Restore Backup") - Yes
Are you with me so far? - Yes.
And @ Varjak is right that after the 3rd restore I get the replacement error.
Plus I have NEVER jailbroken the iPhone. To give you another update, I spoke to a really nice apple tech in India who was atleast able to get me out of the replacement error by doing a recovery mode option. However, the lastest restore still gives me the same error
The SIM card inserted in this iPhone does not appear to be supported.
The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
Message was edited by: jabgars

I got a Model Number: A1181, My hard drive burned out. I bouhgt a new hard drive Wd Scorpio 500 GB. When i tried to install the MAC OS, it identies a hard drive with 3.6 TB and i'm not able to do the installation.

I got a Model Number: A1181, My hard drive burned out. I bouhgt a new hard drive Wd Blue Scorpio 500 GB. When i tried to install the MAC OS, it identifies a hard drive with 3.6 TB and i'm not able to do the installation. I touhgt the new ard drive was bad but i was able to install windows XP. Any ideas what do i have to do?

Well, let's hope that nothing was jiggled out of place when you were installing the new hard drive. Your optical drive may just be out of alignment or the disc you have is "dirty." Get a lint-free cloth and some rubbing alcohol, then clean the disc as thoroughly as you can starting from the center and working outward in a concentric circlular motion. See if that helps. In particular clean the inner portion well.
If this does not help, then you have a problem. You have opened the computer yourself. That action voids all support from Apple. If you take the computer in for service the store may refuse to service the computer. This is not related to your now expired warranty.

How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"?

How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"? When I plugged in my iPad this popped up!

Hi csreddy,
If you are receiving a message to contact an Apple Retail Store or Authorized Service Provider for help updating from iOS 3, click on the link below to initiate that support:
Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
http://support.apple.com/en-us/HT204204
Update your device using iTunes
If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
Install the latest version of iTunes on your computer.
Plug in your device to your computer.
In iTunes, select your device.
In the Summary pane, click Check for Update.
Click Download and Update.
If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
Find out what to do if you get other error messages while updating your device.
Last Modified: Jan 12, 2015
Apple - Find Locations
https://locate.apple.com
Contact Apple for support and service - Apple Support
http://support.apple.com/en-us/HT201232
Regards,
- Judy

My reply function on hotmail is not working.When I open an e-mail and click on reply a yellow tab appears saying Hotmail is not able to complete this request.

When I click on reply the return address appears briefly on the screen but disappears almost immediately. When I try to type in the return address I'm tole hotmail is not able to complete.

I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

While dealing with an external hardware i got a Java update4 request,but was not able to complete that update.After that when i switch on my Mac it shows reinstallation required.i was working with OSX 10.8.5,but after reinstallation now it is 10.7.5 .

While dealing with an external hardware i got a Java update4 request,but was not able to complete that update.After that when i switch on my Mac it shows reinstallation required.i was working with OSX 10.8.5,but after reinstallation now it is 10.7.5 .And while doing search for update it shows your software is uptodate..

Hi Hal,
One possibility, is a strange occurence when applying the big 10.5.8 combo, most people have to Repair Permissions twice in a row, then reboot.

I'm trying to downgrade my storage on my ipod but when I chose my new storage i'm not able to complete the choice because the 'done' button doesn't do anything. can someone please give me some advice?

I'm trying to downgrade my storage on my ipod but when I chose my new storage i'm not able to complete the choice because the 'done' button doesn't do anything. can someone please give me some advice?

Are you choosing a different plan before tapping Done?
To downgrade, you should be doing the following:
Go to Settings > iCloud > Storage & Backup.
Tap Change Storage Plan.
Tap Downgrade Options and enter your Apple ID password.
Choose a different plan to use when your current storage plan expires.
Tap Done.

Not able to complete activation process.

After updating my iPad2 to ios8.0.2., I lost my ability to connect to my cellular network, with an error message reading "Not able to complete activation process.
Does anyone know of a fix for this problem?

Try a reboot press & hold power button & menu button hold both down until you see Apple Logo you will not lose any data. Bsydd uk

Not able to complete Maintenance Cycle in CHARM Maintenance Project

Hi,
While completing the CHARM Maintenance Project, getting following error:
"Error RFC destination
/TMWFLOW/TL_COMPL_CHK_TR_WO_TL: New Maintenance
Cycle M000000177"
Because of this error I am not able to complete the Maintenance Cycle, i.e. not able to change the status of Maintenance Cycle to 'Completed'
Regards
PK

hi PK
please refer the posiblities on
[cannot close maintenance cycle|Cannot Close Maintenance Cycle in CHARM;
jansi

I'm not able to complete a sync on my iPhone

Hi Everyone,
I’m not able to complete a sync on my phone.
It will sync part 1 of 4 and part 2 of 4 ok. It syncs contacts, calendars, notes, photos, and even it would appear my music. But does not complete the sync step 3 or 4 or step 4 of 4 and will not update software.
It throws up the message “iTunes could not back up the iPhone because the backup could not be saved to the computer. There is a least 7 free gigs of space on my computer so space does not appear to be the problem. There is 1 free gig of space still on the phone.
Can anyone give me an idea of what I could do next?
Thanks

Faulty or poor quality CD? Contents incompatible with a Mac?

TS4513 I KEEP GETTING THIS ERROR. PLEASE HELPMainStage 3 was not able to complete the download. Check your internet connection and try downloading again.

I KEEP GETTING THIS ERROR. PLEASE HELPMainStage 3 was not able to complete the download. Check your internet connection and try downloading again.

Hi
From others (on the Logic Forums), it seems that there may have been issues with Apple's servers.
Try again...
if that does not work, delete Mainstage, and then try again to download teh whole thing.
Alternatively, the direct link to the basic content is here:
https://discussions.apple.com/thread/6015391?tstart=0
CCT

Not able to complete an installation of workflow manager 1.0

Similar Messages

Maybe you are looking for