Not able to complete Maintenance Cycle in CHARM Maintenance Project

Hi,
While completing the CHARM Maintenance Project, getting following error:
"Error RFC destination
/TMWFLOW/TL_COMPL_CHK_TR_WO_TL: New Maintenance
Cycle M000000177"
Because of this error I am not able to complete  the Maintenance Cycle, i.e. not able to change the status  of Maintenance Cycle to 'Completed'
Regards
PK

hi PK
please refer the posiblities on
[cannot close maintenance cycle|Cannot Close Maintenance Cycle in CHARM;
jansi

Similar Messages

  • Not able to complete the cycle

    Hi Friends,
    My requirement is that I have to integrate the IS retail system and AFS system.
    1. Now have created the PO in IS retail system and in messages am getting the IDOC> 2.after that i have to transfer this IDOC to AFS system in such a way that sales order is getting created in AFS system> 3.now have to create delivery in AFS system> 4.and the IDOC generated of delivery will go in IS retail system-> 5.and Goods receipt (GR) will get created in IS retail system.
    Have completed step 1 but getting stucked from step 2 onwards.
    Any pointers would be appreciated.
    Regards
    Ashu

    Hello Ashu,
    Please check the online help under the following link:
    http://help.sap.com/saphelp_afs60/helpdata/en/19/d19799324c11d4b33c005004394c29/content.htm
    Also please refer note 1074980 for idocs supported in AFS 6.0
    Regards,
    Rakesh

  • Not able to closing the maintenance cycle of charm

    Hi Team
    I am not able to close the maintenance cycle of charm.
    I had already tried with the phase utility report, I had checked my all authorizations and it is fine.
    I had gone through most of SCN queries for same, current phase of project cycle is completed however. Not able see the any error logs in SLG1.
    Regards
    Harsh

    Hi Rishav,
    We had resolve the issue as now we are able to close the cycle successfully,
    But new CTS project is not being generated, Any idea, should we need to check this with SAP again.
    B R
    Harsh

  • ChaRM: Several maintenance cycles in one maintenance project?

    Hi!
    We are working with urgent correction within ChaRM and thinking about to implement the normal corrections as well.
    Our ChaRM workflow for normal corrections is characterized by:
    a)corrections with different Life cycle (those who will be processed within 1 week, other with 2 week, etc.)
    Questions:
    1) Is it possible to have several maintenance cycles for one maintenance project to handle condition u201Ca)u201D?
    2) What will happen with all the normal corrections and urgent corrections that have a long life cycle (status: in development, test, etc.) when the charm manager set the status of maintenance cycle in u201CGo liveu201D?
    Thank you  very much!
    H. Thomasson

    Hi Holger,
    Maintenance cycle and SMI project is a 1:1 relationship.
    In status GoLive you will be able to continue developement/work on normal corrections but you will not be able to release any transport requests/create transport of copies so your testings in QA will be limited.
    In phase GoLive you are able to import requests into production.
    Normal Corrections which have not been released yet are not lost. Depending on your scenario you may switch phases back to "in dev with rel." after you imported into production. It is not necessary to close and recreate maintenance cycles if you use one project for daily/weekly maintenance.
    /cheers

  • To download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

    to download an App the 3 security questions are required. But at the end, apple is not able to complete the task and gives an error message. No more downloads are possible. What can I do?

    Very Important, how much Free Space is on your Hard Drive first of all? Click on the Macintosh HD on the Desktop, then do a Get Info on it.
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    Do they launch OK while in Safe Mode?

  • Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.

    Probably will never ever think of buying a locked phone from AT&T cause its one of the worst system integrations ever that these companies could think of.
    The entire problem started when I put in a request with at&t to unlock my iphone 4s (ios7) which did get approved. I performed the entire instructions they asked me to do, which is to backup and restore. After doing those instructions my iphone gave me an error message below
    The SIM card inserted in this iPhone does not appear to be supported.
    The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
    Basically saying that at&t hasn't still unlocked the iphone which a really helpful apple executive was able to confirm. I initiated another unlock process from at&t in order to unlock the iphone, just to be sure that its not something wrong from my end. The nice at&t lady stayed on chat with me to unlock the iphone step my step while I was calling the apple tech too. And the apple tech confirmed again that the iphone is locked to at&t.
    Now, just a few minutes ago I tried another restore to see if any progress is being made and to my surprise I got an error message saying
    Replacement Needed. This iphone is not able to complete the activation process and needs to be replaced. Please visit your nearest apple store or authorized service center.
    I feel like I am just going around these two different "money hogger" companies which set certain rules and regulations to screw a regular phone buyer. I purchased this iphone in USA and trying to unlock in India, is it really this hard to simply unlock a device.
    For now I am going to try to call a apple office in india (apprently we don't have very many out here) and see if they can help me. But any other assistance regarding unlocking an iphone 4s would be helpful. I have however, tried checking IMEI.info, called up apple, talked to at&t (which always say go talk to apple) I do have a case number from apple as well in case an apple executive reads this discussion forum (case number: 566383594)
    Thanks

    You got a confirmation from AT&T that it was authorized. Is this correct? - Yes i did get an email authorization on the 21st.
    Then you connected the phone to a computer with the latest version of iTunes installed. You clicked on the phone's name in iTunes, then clicked "Backup Now". - Yes
    When that finished you clicked "Restore iPhone" (NOT "Restore Backup") - Yes
    Are you with me so far? - Yes.
    And @ Varjak is right that after the 3rd restore I get the replacement error. 
    Plus I have NEVER jailbroken the iPhone. To give you another update, I spoke to a really nice apple tech in India who was atleast able to get me out of the replacement error by doing a recovery mode option. However, the lastest restore still gives me the same error
    The SIM card inserted in this iPhone does not appear to be supported.
    The SIM card that you currently installed in this iPhone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iPhone. Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. Please contact Apple for more information.
    Message was edited by: jabgars

  • How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"?

    How to fix this error "this iPad is not able to complete the activation process. Please press Home and start over. If the issue persists, please visit your nearest Apple Store or Authorized service provider for more information or replacement"? When I plugged in my iPad this popped up!

    Hi csreddy, 
    If you are receiving a message to contact an Apple Retail Store or Authorized Service Provider for help updating from iOS 3, click on the link below to initiate that support:
    Update the iOS software on your iPhone, iPad, and iPod touch - Apple Support
    http://support.apple.com/en-us/HT204204
    Update your device using iTunes
    If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
    Install the latest version of iTunes on your computer.
    Plug in your device to your computer.
    In iTunes, select your device.
    In the Summary pane, click Check for Update. 
    Click Download and Update.
    If you don't have enough free space to update using iTunes, you'll need to delete content manually from your device.
    Find out what to do if you get other error messages while updating your device.
    Last Modified: Jan 12, 2015
    Apple - Find Locations
    https://locate.apple.com
    Contact Apple for support and service - Apple Support
    http://support.apple.com/en-us/HT201232
    Regards,
    - Judy

  • Not able to complete CUCM 8.6 installation in esxi

    HI 
    I am not able to complete cucm 8.6 installation on my esxi server, i am getting attached error while installing. please help on this .
    Thanks
    Shijo

    Are you using the OVA template from Cisco? If not try using that.
    Below are the requirements for 8.6:
    http://docwiki.cisco.com/wiki/Virtualization_for_Cisco_Unified_Communications_Manager_%28CUCM%29#Version_8.6.28x.29
    http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware#Processors_.2F_CPUs
    -Terry

  • My reply function on hotmail is not working.When I open an e-mail and click on reply a yellow tab appears saying Hotmail is not able to complete this request.

    When I click on reply the return address appears briefly on the screen but disappears almost immediately. When I try to type in the return address I'm tole hotmail is not able to complete.

    I have no idea what may have caused your MacBook to stop working, but from your description it kind of sounds like it may have started before you ran Software Update and installed the new Apps. Just the general slow feeling and bugginess is what tips me off. You said that you weren't sure if you had closed all open windows, that doesn't matter if the computer restarts itself. It automatically closes all other open applications when restarting.
    As to your data being retrievable, if when you take it in they do a fresh install of the OS, then no, it will not be unless you want to pay several thousand dollars to a software retrieval company.
    I am glad to hear that you have taken into the Apple Store to get it fixed, and that you have all of your purchased music backed up to your iPod. You should be able to just transfer it all back to iTunes once you get your computer back should it be necessary.
    As a side note, the proper place for this topic would probably in the MacBook forums, not iTunes since there is no evidence that iTunes started the issue.

  • While dealing with an external hardware i got a Java update4 request,but was not able to complete that update.After that when i switch on my Mac it shows reinstallation required.i was working with OSX 10.8.5,but after reinstallation now it is 10.7.5 .

    While dealing with an external hardware i got a Java update4 request,but was not able to complete that update.After that when i switch on my Mac it shows reinstallation required.i was working with OSX 10.8.5,but after reinstallation now it is 10.7.5 .And while doing search for update it shows your software is uptodate..

    Hi Hal,
    One possibility, is a strange occurence when applying the big 10.5.8 combo, most people have to Repair Permissions twice in a row, then reboot.

  • I'm trying to downgrade my storage on my ipod but when I chose my new storage i'm not able to complete the choice because the 'done' button doesn't do anything. can someone please give me some advice?

    I'm trying to downgrade my storage on my ipod but when I chose my new storage i'm not able to complete the choice because the 'done' button doesn't do anything. can someone please give me some advice?

    Are you choosing a different plan before tapping Done?
    To downgrade, you should be doing the following:
    Go to Settings > iCloud > Storage & Backup.
    Tap Change Storage Plan.
    Tap Downgrade Options and enter your Apple ID password.
    Choose a different plan to use when your current storage plan expires.
    Tap Done.

  • Not able to complete activation process.

    After updating my iPad2 to ios8.0.2., I lost my ability to connect to my cellular network, with an error message reading "Not able to complete activation process.
    Does anyone know of a fix for this problem?

    Try a reboot press & hold power button & menu button hold both down until you see Apple Logo you will not lose any data. Bsydd uk

  • I'm not able to complete a sync on my iPhone

    Hi Everyone,
    I’m not able to complete a sync on my phone.
    It will sync part 1 of 4 and part 2 of 4 ok. It syncs contacts, calendars, notes, photos,  and even it would appear my music. But does not complete the sync step 3 or 4 or step 4 of 4 and will not update software.
    It throws up the message “iTunes could not back up the iPhone because the backup could not be saved to the computer. There is a least 7 free gigs of space on my computer so space does not appear to be the problem. There is 1 free gig of space still on the phone.
    Can anyone give me an idea of what I could do next?
    Thanks

    Faulty or poor quality CD? Contents incompatible with a Mac?

  • TS4513 I KEEP GETTING THIS ERROR. PLEASE HELPMainStage 3 was not able to complete the download. Check your internet connection and try downloading again.

    I KEEP GETTING THIS ERROR. PLEASE HELPMainStage 3 was not able to complete the download. Check your internet connection and try downloading again.

    Hi
    From others (on the Logic Forums), it seems that there may have been issues with Apple's servers.
    Try again...
    if that does not work, delete Mainstage, and then try again to download teh whole thing.
    Alternatively, the direct link to the basic content is here:
    https://discussions.apple.com/thread/6015391?tstart=0
    CCT

  • HT3275 My time machine is not able to complete a backup, giving me this error message:  the backup disk image "/Volumes/Data/Linda's iMac.sparsebundle" is already in use. How do I fix this?

    My time machine is not able to complete a backup, giving me this error message:  the backup disk image “/Volumes/Data/Linda’s iMac.sparsebundle” is already in use. How do I fix this?

    Stock standard issue.. asked 5-10 times per day here.. look at "more like this" on the right.
    Simply reboot the TC ie pull out the power. .count to 10.. plug the power back in.
    Maybe need to restart the network.. in order modem.. router .. TC.. clients. 2min gap.
    See C12 http://pondini.org/TM/Troubleshooting.html

Maybe you are looking for