Not able to compress project made in FCP4 - HELP

Totally frustrated - 3 weeks behind schedule. We've made a project in FCP4 on our eMac with 512 RAM. We've made other projects in the past, but not this long.
This is 1 hr, 55 minutes, with lots of transitions, moving titles made in LiveType, and audio in AIFF.
We've tried to compress the project with the 120 high quality preset (MPG2 and AIFF audio) and it started to compress, but noticed that the audio got to 99%, 0% on video, and the overall project was shown as 83% when all of a sudden it dropped back to 50% and ran like that for 24 hrs. plus.
Restarted project and tried it with the 120 fast encode and same result. Audio never completes and the video remains at 0%.
We then tried the audio file using the FCP preset for AAC audio but that created a 0% transcoding for both the video and audio remained at 0%.
We tried making the project with a Quicktime conversion but that gave us no results.
We have DVDSP2 and tried importing the file into this program and nothing happened.
We do not have APack to convert to AC3 and am not sure where or how to get it, and once obtained, what to do to make the aduio files in that format, if needed.
We're totally frustrated and am begging for some help.
Sorry to be long winded but if someone can guide us to where we can finally get this project into DVDSP2 or even iDVD, we'll be forever greatful.
Thank you very much.

Hi Patrick
Thank you very much for the caution, but we already went ahead a did a QT movie at 48khz. Will this affect the quality of our original project files?
I'm assuming that we'll need to redo the QT movie?
We're running this on a 500GB drive, but have consumed a lot of space with this and other remaining projects.
I'd just sent a question regarding now how to compress this QT movie which is 6.5GB with DVDSP2 as this is our first use with Studio Pro.
Randy

Similar Messages

Users are not able to edit projects even with right permissions

Hello,
We have a weird issue. Your help or inputs is appreciated.
A user is not able to edit projects in SAP PPM 50 unless 1)the project is created by the user and 2)user has access to ACO_SUPER auth object. For the projects, the user is trying to edit, we made sure user has write ACL access in the administration tab of the project.
Obviously, we can't give all users ACO_SUPER access. Please advise how to proceed.
Thanks in advance

Hi Pranith,
You are right..ACO_SUPER is not recommended for all users, it's an super user access.
In PPM-Project management, there are two authorizations
1) General Authorizations
2) Project Specific authorizations
General authorizations:
This is provided to user using a backend PFCG roles like 'SAP_CPR_USER' which contains business partner view access and other similar roles are assigned for project creation, template creation etc.,
Project Specific authorizations:
This authorizations are provided using ACL 'Authorizations' tab within the project and here you have different authorisation activities like admin, write, read & none.
As you said, the user who creates the project will get 'Admin' authorization and after that if you want give access to other users, then you need to add manually users in the project definition-authorisation tab or you can provide default authorization through project role type.
Have you added the users manually in authorisation tab?
Regards,
Ravi

In P6 version7 not able to copy project with the baseline.

Hi,
In P6 version 7 it is not able to copy project with the baseline. It copies only the schedule.
Please help.
regards,
Baber.

Tried the solution from another thread but did not work completely (as warned) - the workaround didn't quite work for me either:
https://discussions.apple.com/thread/1398462?start=0&tstart=0
Ended up taking a backup, did a fresh install, created the account as the first one so that it gets the same UID as the other Mac (on which my account was the first) and restored my data - was painful but finally on track.

Not able to assign Project to the Urgent Change Request with Developer Id with the existing Authorizations. With SAP_ALL authorization, everything works fine.

The Urgent Change request is in created status and I am not able to assign project to it. Also I am not able to change the status of the change request to In developement with developer's Id. Everything works fine if i assign SAP_ALL authorization to the developer.
Below are the roles assigned to Developer ID -
SAP_CM_SMAN_DEVELOPER
SAP_SM_CRM_UIU_FRAMEWORK
SAP_SM_CRM_UIU_SOLMANPRO
SAP_SM_CRM_UIU_SOLMANPRO_CHARM
SAP_SMWORK_BASIC_CHANGE_MAN
SAP_SMWORK_CHANGE_MAN
SAP_SOCM_DEVELOPER
Z_S001
ZSAP_SOCM_DEVELOPER
Issue screen -
SU53 for Developer-
Please suggest which roles/Authorization should be assign to Developer Id.
Thanks
Kavita

Hi Kavita,
Copy these roles to Z-roles
SAP_CM_SMAN_DEVELOPER
SAP_SM_CRM_UIU_FRAMEWORK
SAP_SM_CRM_UIU_SOLMANPRO
SAP_SM_CRM_UIU_SOLMANPRO_CHARM
SAP_SMWORK_BASIC_CHANGE_MAN
SAP_SMWORK_CHANGE_MAN
SAP_SOCM_DEVELOPER
Assign this to user.
Put a stace using ST01.
Find that object and modify/add in your custom role.
Regards,
Divyanshu

Not able to compress the init request for non cummulative cube

hi sdn
i'm not able to compress request for stock init( for some plants) in non cummulative cube with a marker update the job is cancelled when I see the log it is showing no. of sql lines
and job terminated.
what may be the cause of the problem
ruabne

You need to restrict the number of the request that you are going to compress for every job. Try also to enlarge TableSpace, in particular the temporary TableSpace, that you can subsequently reduce.
Consider that any other job, like query from user or other uploads, reduce the speedof the compression.
Hope it helps.
Regards

Not able to view the content in Microsoft help viewer (MS VS 2012)

Hello Team,
I'm Rahul from Daimler-Chrysler, Bangalore location. I’m the IT Engineer for Daimler-Chrysler.
We tried many settings in IE but still not able to resolved. So i need more expert help.
My customer having one issue-
# User is not able to view the content in Microsoft help viewer (MS VS 2012), below is the error: Its opening in HTML Format.
So please help me. Contact no- +91-9972004298. and personal id:- [email protected]/[email protected]
I call you to Microsoft customer care they advice me to ASK Question. Please help me, I'm waiting for your reply.
Thanks,
Rahul B. Patil.
+919972004298.

Hi Sri,
it looks that your HANA instance has been created before we enabled the web-based development workbench. Some privileges are missing, we can't migration those existing instances.
Nevertheless you can ignore the error above. You can see all the content inside your instance "smstest1".
If you want to get rid of the cosmetic issue. You might delete this instance and create a new one.
Best regards
Xu

I am using iPad 3 and I try to use 30-pin Digital AV adaptor for mirroring on my Samsung HD TV. Unfortunately it is not a full screen projection. Anyone can help?

I am using iPad 3 and I try to use 30-pin Digital AV adaptor for mirroring on my Samsung HD TV. Unfortunately it is not a full screen projection. Anyone can help?

The iPad Screen is almost square, HD TVs are rectangular so will never be full screen. When watching movies, the movies native aspect ratio will be used rather than the iPads screen aspect ratio so will look full screen if the movie is full screen, but most likely will be seen in wide screen letter box format. with black bars across the top and bottom as that what most movies from iTunes are in, format wise

My ipod 7th generation is not recognised by itunes and my computer. I am not able to transfer any songs. Please help me on this regard. I tried all the steps from apple website

my ipod 7th generation is not recognised by itunes and my computer. I am not able to transfer any songs. Please help me on this regard. I tried all the steps from apple website

This article should give you the options
https://discussions.apple.com/docs/DOC-3991

My iphone is not charging or showing in my computer. but its getting charged via wall apple charger.. Not able to connect with itunes.. please help.... :(

My iphone is not charging or showing in my computer. but its getting charged via wall apple charger.. Not able to connect with itunes.. please help....

No it doesn't. Sometimes it make a sound that it should when connecting but that is it. Never actually charges or syncs. And it is a brand new cord.

Not able to view Forms Server version in Help: About Oracle Applications after the forms upgrade 10.1.2.3.0

Hi all,
DB:11.2.0.3.0
EBS:12.1.3
O/S: Sun Solaris SPARC 64 bits
I am not able to view Forms Server version in Help: About Oracle Applications after the forms upgrade 10.1.2.3.0 after the forms upgrade 10.1.2.3.0 as per note:Upgrading OracleAS 10g Forms and Reports to 10.1.2.3 (437878.1)
Java/jre upgraded to 1.7.0.45 and JAR files regenerated(without force option). Able to opne forms without any issues.
A)
$ORACLE_HOME/bin/frmcmp help=y
FRM-91500: Unable to start/complete the build.
B)
$ORACLE_HOME/bin/rwrun ?|grep Release
Report Builder: Release 10.1.2.3.0 - Production on Thu Nov
28 14:20:45 2013
Is this an issue? Could anyone please share the fix if faced the similar issue earlier.
Thank You for your time
Regards,

Hi Hussein,
You mean reboot the solaris server and then start database and applications services. We have two databases running on this solaris server.
DBWR Trace file shows:
Read of datafile '+ASMDG002/test1/datafile/system.823.828585081' (fno 1) header failed with ORA-01206
Rereading datafile 1 header failed with ORA-01206
V10 STYLE FILE HEADER:
        Compatibility Vsn = 186646528=0xb200000
        Db ID=0=0x0, Db Name='TEST1'
        Activation ID=0=0x0
        Control Seq=31739=0x7bfb, File size=230400=0x38400
        File Number=1, Blksiz=8192, File Type=3 DATA
Tablespace #0 - SYSTEM rel_fn:1
Creation   at   scn: 0x0000.00000004 04/27/2000 23:14:44
Backup taken at scn: 0x0001.db8e5a1a 04/17/2010 04:16:14 thread:1
reset logs count:0x316351ab scn: 0x0938.0b32c3b1
prev reset logs count:0x31279a4c scn: 0x0938.08469022
recovered at 11/28/2013 19:43:22
status:0x2004 root dba:0x00c38235 chkpt cnt: 364108 ctl cnt:364107
begin-hot-backup file size: 230400
Checkpointed at scn: 0x0938.0cb9fe5a 11/28/2013 15:04:52
thread:1 rba:(0x132.49a43.10)
enabled threads: 01000000 00000000 00000000 00000000 00000000 00000000
Hot Backup end marker scn: 0x0000.00000000
aux_file is NOT DEFINED
Plugged readony: NO
Plugin scnscn: 0x0000.00000000
Plugin resetlogs scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Foreign creation scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Foreign checkpoint scn/timescn: 0x0000.00000000 01/01/1988
00:00:00
Online move state: 0
DDE rules only execution for: ORA 1110
----- START Event Driven Actions Dump ----
---- END Event Driven Actions Dump ----
----- START DDE Actions Dump -----
Executing SYNC actions
----- START DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK' (Async) -----
Successfully dispatched
----- END DDE Action: 'DB_STRUCTURE_INTEGRITY_CHECK'
(SUCCESS, 0 csec) -----
Executing ASYNC actions
----- END DDE Actions Dump (total 0 csec) -----
ORA-01186: file 1 failed verification tests
ORA-01122: database file 1 failed verification check
ORA-01110: data file 1:
'+ASMDG002/test1/datafile/system.823.828585081'
ORA-01206: file is not part of this database - wrong
database id
Thanks,

Hello everyone! I'm having a trouble... I need to download Adobe Illustrator for windows 8, but i'm not able for doing that. Can you help me Please?

Hello everyone! I'm having a trouble... I need to download Adobe Illustrator for windows 8, but i'm not able for doing that. Can you help me Please?

Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

My Numbers file sent to somebody is not able to open in Excel can anybody help to solve this problem?

my Numbers file sent to somebody. He is not able to open in Excel can anybody help to solve this problem?

Numbers files are not compatible with MS Excel. To share a Numbers file with Excel you need to export you Numbers file in MS Excel format. To do this:
1) Open you Numbers document
2) select the menu item "File > Export..."
3) select "Excel" for the target output
4) click next and select where to save the file.
5) email the file you saved

I try to download abode acrobat xi pro from abode download asssistant,it shows download is completed.but iam not able to get thet downloaded file,please help me

i try to download abode acrobat xi pro from abode download asssistant,it shows download is completed.but iam not able to get thet downloaded file,please help me

oatgeo wrote:
I checked the proxy and it should be OK. That's mean I have to try and try again until I get it from the slow servers.
Yes.

Updated payment, still not able to access adobe audition?? help!!

updated payment, still not able to access adobe audition?? help!!

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

Was able to bluetooth one time to play scrabble on our two iPad 1's, but have not been able to do so again. Both are searchable, but are not able to find each other. Any help will be appreciated. Thanks.

Was able to bluetooth one time to play scrabble on our two iPad 1's, but have not been able to do so again. Both are searchable, but are not able to find each other. Any help will be appreciated. Thanks.

Both need to be in the lobby, and searchable at the same time. Also, if either has been paired with a keyboard or headphone since you played, go into settings, and make sure those devices are unpaired, and not interfering with the process.

Not able to compress project made in FCP4 - HELP

Similar Messages

Maybe you are looking for