Not able to configre Digital Signature

Hi All,
I have a requirement to configure the Digital Signature in R/3 System. I have a digital signature also
Environment:
1.ECC 6.0 ABAP+Java with Oracle 10g and Linux
2. EP 7.0 is also connected with ECC System
1. ADS Service is configured in R/3 and it is tested and running well
I have read some guide as well as saw the Weblog also regading ADS. Now i have some confusion and i am not able to get my answer.
1. How many certificate required for SOAP client authentication.
2 Where to install these certificate ABAP stack JAVA stack of ECC or Java stack on EP
What i did is given below.
I have configured the setting as per this blog and ADS guide
/people/dezso.pap/blog/2008/01/25/ads-ssl-configuration-journal-i-abap--java-640--70x
but i am getting the ADS_HTTPS connection errorin SM59 and that is related to something like certificate error, now i am confused between the certificate, it is not much clear that how many certificate is required for configuring the digital signature and where to install as ECC system is connected to EP system also.
Can any one help to to understand upon these points, because i am toltally confused between these certificates.
Regards,
Subhash

Any idea, or Comments on this.
Regards,
Subhash

Similar Messages

I can't run Itunes! After installing Itunes, I receive a message saying that Windows could not verify Apple's digital signature and it closes.

Pls HELP me! I can"t install it Itunes on any of my computers. After downloading it ( Run now or Saving it) it will no run because I keep receiving a message saying that Windows can not open this file because it could not verify Apple's Digital Signature. I have changed my internet security settings to allow downloads from unverified websites but it will not allow me to run Itunes. I had an older version of Itunes so I tried to install the update and it wouldn't work because so the same message about not being able to verify the digital signature. I uninstalled Itunes and Quicktime and all other Apple programs on my system. Then I tried to download it again... no luck the same message came up again. I then went to my other computer that NEVER HAD ANY APPLE software on it and tried to download Itunes. It gave me the same message. Please help me, I'm going crazy tring to figure this out.

I had this same issue occur today during update, searched and finally tracked to problem with windows registry. Used online version of windows registry tool "Fix It" (can also download portable version for offline check. I selected Apple updater utility from list to fix and it did it's thing. Returned to my downloaded 10 iTunes adn isntalled perfectly fine.
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Good luck. Worked for me back up and running.

Install blocked does not have a valid digital signature verifying publisher.

Windows XP blocked the install. Error message was:
Unknown Publisher. Does not have a valid digital signature that verifies its puiblisher.

That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Guam --(United States Terretories) Not able to purchase digital copy from online store?

Guam<--(United States Terretories) Not able to purchase digital copy from online store? Why? especially developers program. is their anyway to get service directly from Main Land rather than going to other countries' or 3rd party resellers' to get products?

This is a user to user forum, sorry we would have no idea. I'd suggest you contact Apple directly. The number for customer relations in the US is 800-767-2775, I have no idea that number will work in Guam or not.

TS3212 I have removed my pop-up blocker completely and still receive the following error message when attempting to download iTunes: "The file was blocked because it does not have a valid digital signature that verifies its publisher".....any ideas?

have removed my pop-up blocker completely and still receive the following error message when attempting to download iTunes: "The file was blocked because it does not have a valid digital signature that verifies its publisher".....any ideas?

That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Mail not sending email with digital signature

Hello helpers,
What's the deal with Mail and digital signatures? I could never get the application to work with my Versign class 1 digital signature in Tiger and now in Leopard. Keep getting error 1035. That's what led mr to Thunderbird and I got Leopard hoping to resolve this issue. Keychain seems as if it's a weirdo in its simplicity and where I believe the problem lies. my digital certificate resides on the system but is not in the my certificate category. However, when I select it in system, afterwards it shows up in my certificate category. If I close Keychain and reopen it, my certificate is empty.
I like Mail. However, it's important to me to use my digital certificate in signing my email. I believe I must have done something wrong in the installation of the certificate and I can't imaging what. Why can't Mail accept digital certificate directly like other email application rather than go through a third party...Keychain. Mail help did not help. Any workable solution would be appreciated. Thanks
Ralston

Just discovered that I have an icloud account and a .me account in my accounts inbox. Do I have a problem with migration to icloud?

10.5.2 not downloading because of digital signature

I've been trying to update my iPhone 4 for a while now but it keeps coming up with an error. When I try to update iTunes it's now saying it can't because of it's digital signature. It did this on the last update too and I got my younger brother to fix it but now it's doing it for a second time. Most infuriating!

I've been trying to update my iPhone 4 for a while now but it keeps coming up with an error. When I try to update iTunes it's now saying it can't because of it's digital signature. It did this on the last update too and I got my younger brother to fix it but now it's doing it for a second time. Most infuriating!

I'm working in Preview and I'm not able to add my signature to a PDF. Moreover, the "Manage Signature" is always asking for a new signature.

When I follow the directions in help for adding a signature. Preview asks that I provide a signature then click the location it should appear.
Obviously I'm doing something wrong because the signature does not appear on the line I click.

Yes.
I was reading other posts on similar problems and I'm going to try to remove my preview preference files from the preference folder.

Print Digital Signature

Hi Experts,
I've setup the digital signature for certain document types. Now when I print those signed document, am not able to get the approver's signature on print out.
From the SAP Help I found below link and it says that I've setup ' allowed' or 'possible' option for Document Display in Digital Signature Strategy.
http://help.sap.com/saphelp_sm71_sp01/helpdata/en/45/f0f4a900b404abe10000000a114a6b/content.htm
I tried both the options and still not able to see digital signature during the print out or document display.
In the Help (above link) it also says that
"The document display and print option are not available to the signee if the forbidden option is set in the system table for the entire application."
Where can I find the System Table to remove the forbidden entry for the application?
Do I need to setup anything else to enable the digital signature print option?
Thanks,
Shaun

Hi Amit,
I am not sure on how to get the the signature of the person who released the PO, because as per my understanding the Relase Strategy i.e the Relase code is attached to a Basis profile.
What I would suggest is if you can get all the guys who can release a PO and define him as a Purchaser ie. a Purchasing group then it would be easier to print his signature in the PO.
Here are the Highlevel steps
1. Just have the Signature you want to print in a Tiff format.
2. You can upload the signature as a standard Text using program RSTXLDMC to upload and give a text name.
3. call the text name in your sap scripts.
reward if useful.
Thx,
MJ

Created a user account for my daughter but itunes will not open, just says something about digital signature policy

Hi there, newbie here. Wondered if anyone can help, opened another user account for daughter on windows 64, and when we tried to open itunes a message came up saying it could not open because of digital signature policy, when i go back to my user it opens ok.
Could anyone help.
Cheers

am not prepared to enter my credit card also on her account application.
You can enter it on the registration page then delete it immediately after you complete the registration.
If I purchase a iTunes card with some credit, can I open the account for her just with the code?
If you wish. Instead of going to Create new accout, go to Redeem on the main iTunes store screen, enter the code, then select *Create new account*.
What will happen if the credit on the card gets to zero?
She will not be able to make a purchase until another gift card is entered or a CC is linked to the account.

UPGRADED 10.4.11 ON MACBOOK PRO TO 10.5, NOW UPDATES TO 10.5.8 WILL NOT SAVE, "DIGITAL SIGNATURE DOES NOT MATCH". ANY IDEAS.

UPGRADED 10.4.11 ON MACBOOK PRO INTEL TO 10.5.1 (FAMILY PACK VERSION), UPDATES TO 10.5.8 WILL NOT SAVE DUE TO, "DIGITAL SIGNATURE DOES NOT MATCH". ANY IDEAS? CAN I UPGRADE TO 10.6.1 WITHOUT SAME ISSUE.

Well, not sure if having the disk in a firewire case or over a network would have made a difference.
The solution of making a disk image as in article http://support.apple.com/kb/TS2664 was what worked for me.
After, mounting the disk image the Migration Assistant completed without errors. So far everything seems to be working like it did on 10.4.11.

Reader not allowing digital signatures

I used Adobe9 to create a form so our volunteers/interns can fill it out, sign it and send it back to us via email. I can get everything to work so that it works in Acrobat reader, EXCEPT allow signing. No matter how I've tried, (extending the form, creating a policy to allow filling in forms and signing), when I bring the form up in reader (ver 9.3), the document properties still say signing is not allowed. I've tried other reader versions, same result. This should be so much easier, but I cannot figure for the life of me what is wrong. Any idas?
Thanks
Ken

George,
That is what I thought too. So I did extend it, and it still won't work. Here is a copy of my security properties after
I extended it as you mentioned: ------>
I can now save data in the form, but the only thing that is NOT working is this %$#@ digital signature thing. Maybe I don't understand digital signatures enough, but in Acrobat9, when designing a form, I could create a digital signature in the fly. Can't users do that when they view a document in Reader? Is it a properties issue, or can't a user create a digital signature in Acrobat Reader at all? Seems like extending a form takes away the signing property.
Ken

Not able to update signature

am not able to upgrade the signature to the latest in the sensor.
thanks in advance

check the sensor for the latest patches and updates.

Temporarily disable Digital Signature Checks to Install MS SQL Server 2008 with no Internet Access

I am attempting to install a licensed copy of MS SQL Server 2008 in a Private Enclave that does NOT have Internet access on a Win2008 R2 SP1 server (that is VM - thus I can't reboot and press F8 to select "Disable Driver Signature Enforcement"
). The installation fails with an error of the vc_red.cab file being found either corrupt or a bad digital signature. The file is good, but the signature has an expiration of 2011. I understand that a DOTNET SDK v1.1 program called setreg.exe
will enable disabling the digital signature check, but I am not permitted to use that program.
I might be permitted to use the "Signtool.exe" utility, but it is not clear what command sequences are necessary to disable and then re-enable the Digital Signature checks.
I saw a thread that recommended using the command:
bcdedit.exe /set nointegritychecks ON
However, the comments indicated that this might not have worked.
Are there Registry settings I can use with regedit to make the necessary changes to be able to install the application? I anticipate running into this problem with other software when I do not have Internet connectivity. I already tried
downloading the Microsoft CRL files; updated the lists on the Server; and rebooted. This did not solve my problem.

Hi,
As far as I know, it is not recommended to disable digital signature check.
Since we are not familair with installing MS SQL server, please also refer to SQL forums below to see if experts there have more insights regarding the matter.
https://social.technet.microsoft.com/Forums/sqlserver/en-US/home
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Digital Signature - Bill of Lading

Hi,
I am new to SAP Applications. Could someone brief me whether I am able to integrate digital signature into Bill of Lading using NetWeaver either Java or .Net Connector?. What other requirements must I have in order for this to be possible(hardwares, softwares, environment).
Other than that, what knowlegde of SAP Application i need to do it(programming, applications).
Thanks
Joey

Hi Sunil,
A Bill of lading (BOL) is a document issued by a carrier, e.g. a ship's master or by a company's shipping department, acknowledging that specified goods have been received on board as cargo for conveyance to a named place for delivery to the consignee who is usually identified. The term derives from the noun "bill", a schedule of costs for services supplied or to be supplied, and from the verb "to lade" which means to load a cargo onto a ship or other form of transport.
The BOL can be found in the Output determination for the Transportation [Transaction V/82]
Example:
1. Output determination starts in V7 with output type CMR1 and the assigned access sequence.
2. The access sequence defines the fields with which the key for the condition table is read.
(for example, condition table B017: shipment type of the shipment is read)
3. If the condition record is found, the system proposes an output with the output attributes found in the table.
4. The output proposal (possibly not yet processed) is stored after the document is posted as an output status record in the NAST table.
Hope this will help.
Regards,
Ferry Lianto

Not able to configre Digital Signature

Similar Messages

Maybe you are looking for