Not able to configue instance in BPM 9.24
Hi ,
I have uninstalled BPM 9.22 and trying to install BPM 9.24, however when I am configuring
instance then I found some new option like - filling truststore /keystore path, password etc, so
I am not able to understand what to fill here and what option need to check in last three cert validation option.
So could some one plz give me the complete information of the details need to fill in security setting option.
Error - faild to register
Ajeet Kumar
kumaraj,
You are in the consumer end products forum. You will also want to ask your question over at the Enterprise Business Community.
Click the plus sign (+) next to Discussion Boards to drop down all the options for servers, networking and any other professional equipment problem.
http://h30499.www3.hp.com/
Good luck.
Similar Messages
-
Hi,
Not able to stop our Solution Manager system.
Os- AIX 6.1 & database-Oracle 11
Getting this error when trying to stop the instance:
pm2adm> stopsap unxs0275
Checking PM2 Database
Database is running
stopping the SAP instance DVEBMGS10
Shutdown-Log is written to /support/home/pm2adm/stopsap_DVEBMGS10.log
/usr/sap/PM2/DVEBMGS10/exe/sapcontrol -prot NI_HTTP -nr 10 -function Stop
stop of Instance failed
Error log:
pm2adm> pg stopsap_DVEBMGS10.log
Trace of system startup/check of SAP System PM2 on Fri 26 Aug 10:55:50 2011
Called command: /usr/sap/PM2/SYS/exe/run/stopsap stop
10:55:54
stopping the SAP instance DVEBMGS10
10:55:55
Shutdown-Log is written to /support/home/pm2adm/stopsap_DVEBMGS10.log
10:55:57
/usr/sap/PM2/DVEBMGS10/exe/sapcontrol -prot NI_HTTP -nr 10 -function Stop
26.08.2011 10:55:57
Stop
FAIL: HTTP error, HTTP/1.1 401 Unauthorized
10:55:59
stop of Instance failed
Can you please suggest?The sapstartsrv is not allowing you to perform the Stop option for instance 10.
The sapstartsrv should create a streamfile in the /tmp/.sapstream5<instance number>13. Check
if this file has the right permition, something like that:
srwx--- 1 <sap>adm sapsys .sapstream51013
To solve the issue you could try:
1. Try restart the sapstartsrv for the instance 10 and check if this will solve the problem.
2. check if the s-bit permission in the program sapuxuserch (note 927637)
3. In the last way you could disable the protect method for sapstartsrv with the instace profile parameter
"service/protectedwebmethods = NONE" and restart the sapstartsrv. This certainly will solve the problem, but I do not recommend it for security aspect.
Before unprotect the web methods you should try to update the sapstartsrv.
Edited by: Clebio Dossa on Aug 27, 2011 12:52 AM -
Not able to see task of BPM process in UWL
Dear all,
I am not able to see my task in Portal UWL and getting an error in UWL workset saying, an error occured while trying to connect to provider and detail message says - Unexpected error occured: XMLParser: No data allowed here (:main:, row:6, col:2)
In the Portal Log i can see following error message -
process()
[EXCEPTION]
com.sap.engine.interfaces.webservices.runtime.ProtocolExceptionExt: Authentication failed. For details see log entry logID=0021288C0230293F0000000500006EB3 in security log.
at com.sap.engine.services.wssec.srt.protocols.ProviderSecurityProtocol.logThrowable(ProviderSecurityProtocol.java:1178)
at com.sap.engine.services.wssec.srt.protocols.ProviderSecurityProtocol.handleRequest(ProviderSecurityProtocol.java:527)
at com.sap.engine.services.webservices.espbase.server.runtime.ProtocolProcessor.protocolsHandleRequest0(ProtocolProcessor.java:95)
at com.sap.engine.services.webservices.espbase.server.runtime.ProtocolProcessor.protocolsHandleRequest(ProtocolProcessor.java:70)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.preProcess(RuntimeProcessingEnvironment.java:483)
at com.sap.engine.services.webservices.espbase.server.runtime.RuntimeProcessingEnvironment.process(RuntimeProcessingEnvironment.java:322)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPostWOLogging(ServletDispatcherImpl.java:199)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:65)
at com.sap.engine.services.webservices.servlet.SoapServlet.doPost(SoapServlet.java:61)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:754)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:847)
I am using Portal 7.2 with SP level 08.
Thank and Regards,
M.D.SahuHi Mithileshwar,
Start BPM Process Trigger - Read timed out
Regards,
V Srinivasan -
Hi All,
we have oracle rac database 10.2.0.3 on windows server 2003. there are 8 databases on windows server.
Its a two rac instance databases.
Every Weekend our windows team apply a maintenance patch on windows server.
However this weekend after applying the patch, All the databases started up normally.
One of the database is giving problem. whenever we try to start this database we are getting an error.
sqlplus "/as sysdba"
startup
ORA-03113 end-of-file on communication channel
In alert log, I can see the below error.
Sat Jun 05 07:44:55 2010
Errors in file d:\oracle\product\10.2.0\admin\erpplt1\bdump\erpplt11_lmon_4780.trc:
ORA-00603: ORACLE server session terminated by fatal error
ORA-27501: IPC error creating a port
ORA-27300: OS system dependent operation:IPC_CreateNamedSocket failed with status: 10049
ORA-27301: OS failure message: The requested address is not valid in its context.
ORA-27302: failure occurred at: initport_1
Sat Jun 05 07:44:58 2010
Errors in file d:\oracle\product\10.2.0\admin\erpplt1\bdump\erpplt11_pmon_876.trc:
ORA-00484: LMS* process terminated with error
Sat Jun 05 07:44:58 2010
PMON: terminating instance due to error 484
Sat Jun 05 07:44:59 2010
Errors in file d:\oracle\product\10.2.0\admin\erpplt1\bdump\erpplt11_reco_6340.trc:
ORA-00484: LMS* process terminated with error
I tried resolving the issue but in vain.
your help is appreciated.
Please some one help me on this.
Thanks and Regards,Hello,
It seems from the error that something is screwed up from networking side. CRS is not able to use IPsocket and use port so please talk to your network admins and ask what patches they've applied?
Thanks, -
Not able to start Instance in MMC
Hi,
I have installed SAP NetWeaver Composition Environment 7.1 SR5 - Developer Edition which is a trial version on a windows xp pro virtual machine. I have installed NWDS 7.1 Composition Environment SP05 successfully.
I have installed Java Platform, Enterprise Edition 5 SDK.
The problem is that the two instances in MMC appears to be grey instead of green. That is why I am not able to deploy any web dynpro application. Does any body know that what steps I need to take after installing the developer edition? What about the SDM?
Earlier http://localhost:50000/ was displaying a web dynpro exception just after completion of installation of developer edition but now I am getting page cannot be displayed error.
Please help / guide. I need this envirnoment to be set up soon for practicing web dynpro.
Regards,
VaibhavHi Vaibhav,
You need to start server from MMC. Before starting please check following thing are correct or not.
- Update your server IP address and host name in host file entry at (Start > RUN > drivers > etc > host file)
- Update JAVA_HOME system enviromental variable in my computer (My computer > Priperties >> Advance >> Startup and Recovery >> Enviromental Variable >> System Variables >> Add new JAVA_HOME parameter with path for installed Java JDK)
- Check database server services (Start > Run > Services.msc > Start your database services manually and change properties as automatic)
After that please try to start your SAP Server :- open MMC >> Right Click on Server Node >> Select All Task >> Start >> Enter your Desktop userid and password. It will take 20-40 min if you are starting first time.
Please check installation Guide : [Install & Configure SAP NetWeaver Composition Environment 7.1 ehp1 |http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b057d7e3-b89e-2b10-1e9e-c426e967f8e1]
Hope it helps
Regards
Arun -
SAP XI not able to split message in BPM
Hello All,
In our XI production system Message information is coming into the XI from CCS but XI BPM is not splitting the message to the external system . this is happening to one perticular interface.
Message execution status is showing as successful and so we are not getting any error log.
May be this could be because of memory problem.
Please provide a solution or if it is related to memory please suggest how to check and solve this issue.
Thanks & Regards,
Suhas KulkarniHello, Vishwanatha.
You're actually expanding message area (do you see the blue line on your screenshot?)
But it's overlapped by other views. You can drag the message icon a little bit and you'll see this:
I had the same issue in IDES system.
What can be done:
1. Switch to Default skin from current one (I can guess it's a Signature Design right now).
2. Or use old-style message area. For this set MESSAGE_AREA_TYPE parameter as INPLACEWINDOW in the parameter profile of your business role.
Hope this will help you. -
Can not able to log into the BPM workspace ?
Hi All,
I am using ALBPM 5.7 enterprise server and deployed my project into the enterprise server.
After the deployment when I tried to log into the workspace it is not taking any of the password.
PS: Before deployment I never tried to login to the workspace since I do not have user id for the project.
There are users in the participant wizard and I even tried to reset the password of existing user but it is still not working. I even tried to create a new participant but still it is not taking the password for the same user.
Is it like the new password/participant will get active only after certain time interval say 24 hrs.
But this is not the case of ALBPM 6.0 as far as my knowledge is concern.
Can somebody let me know where I made anything wrong.
If somebody has BPM administration document (Password Reset/Create participant in 5.7), please let me know.
Thanks in advance.
Bibhu
Edited by: Bibhuti Bhusan on Aug 18, 2010 9:57 PMIt sounds like you are trying to log into the workspace with the admin user..... not a participant.
The participants need to be set up in the Process Administrator, (which you will log in via the admin user / pass that was created for the engine).
Here are the 5.7 Documents: [http://download.oracle.com/docs/cd/E13165_01/albsi/docs57/index.html|http://download.oracle.com/docs/cd/E13165_01/albsi/docs57/index.html]
Specifically the 'Process Admin Document' at: [http://download.oracle.com/docs/cd/E13165_01/albsi/docs57/olh_processadministrator/index.html|http://download.oracle.com/docs/cd/E13165_01/albsi/docs57/olh_processadministrator/index.html]
HTH
-Kevin -
Not able to ASM instance as sysasm after upgrade?
Hi,
I have upgraded ASM instance from 10.2.0.4 to 11.1.0.6. After upgrading couldn't able to login as sysdba and ASMCMD also. but i can login as sysdba.
Please help
sqlplus "/as sysasm"
SQLPlus: Release 11.1.0.6.0 - Production on Tue Apr 12 01:26:38 2011*
Copyright (c) 1982, 2007, Oracle. All rights reserved.
ERROR:
ORA-01017: invalid username/password; logon denied
sqlplus "/as sysdba"
SQL*Plus: Release 11.1.0.6.0 - Production on Tue Apr 12 01:33:19 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
*$ echo $ORACLE_SID*
+ASM*
*$ echo $ORACLE_HOME*
*/u01/app/oracle/product/11.1.0/db_1*
*$asmcmd*
ASMCMD-08103: failed to connect to ASM; ASMCMD running in non-connected mode
ASMCMD>Hi,
echo $ORACLE_SID
+ASM*
*$ echo $ORACLE_HOME*
*/u01/app/oracle/product/11.1.0/db_1*I have set properly ORACLE_SID. I am getting Invalid Username/Password Error when login asm instance as sqlplus "/as sysasm"
Thanks,
Edited by: user2017273 on Apr 12, 2011 3:41 AM -
Hi Experts,
I am trying hit a BPM engine hosted in a remote WLS cluster environment.
I have a stand alone java papi client , which try to get instances...doing some session.getInstanceByFilter...
I am getting the the Session but when it try to a session.getInstanceByFilter it fails ....I had set the system properties giving the path of my bpm engine jndi propeties files ...
System.setProperty("fuego.j2ee.initialctx.file", JNDIPROS_PATH);
And my property file conatins :
java.naming.factory.initial = weblogic.jndi.WLInitialContextFactory
java.naming.provider.url = t3://remoteserver:30434 .
Any thing i missed out ? DO i need give the ENGINE.ID ?
Not able to understand why its looking for t3://localhost:7001 ,where my BPM WLS server address is diffrent ..
Err :
An error occurred when subscribing to the JMS Topic engine. Reason:'javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://localhost:7001: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused; No available router to destination]
Caused by: t3://localhost:7001: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused; No available router to destination
javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://localhost:7001: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused; No available router to destination]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:47)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:651)As your are using Java Standalone (say calling from Main() )
Then you can use
//set up system property
System.setProperty("java.naming.factory.initial","weblogic.jndi.WLInitialContextFactory");
System.setProperty("java.naming.provider.url","t3://remoteserver:30434");
//setup PAPI conf
//get Session
//execute ur method.
if you don't mention this "System.setProperty("java.naming.provider.url","t3://remoteserver:30434");".then by default it will look for "localhost:7001" (default for weblogic)
for cluster env you can use
System.setProperty("java.naming.provider.url","t3://remoteserver2:30434,remoteserver2:30434");
Hopes this helps.
--Biltu -
10g Enterprise Manager is not able to connect to the database instance
I am running a Oracle 10g database in Solaris 10 server. When i am trying to connect to the enterprise manager it says Enterprise Manager is not able to connect to the database instance.
The database instance is open,the listener is up and the agent connection also says that it succeeded.
The server houses two 10g databases and the EM was working properly till yesterday. Kindly Help.
Thanks in advance.
RamHi,
The EM is started and if i give emctl status dbconsole
-bash-3.00$ emctl status dbconsole
Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
http://gladiator:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running
Logs are generated in directory /db8/ora10gr2/product/10.2.0/Db_4/gladiator_TROY/sysman/log
it says that the EM is running. But when i am trying to access the URL it is in IE it says Page cannot be displayed what could be the problem for this???
Thanks in advance.
Ram -
Enterprise Manager is not able to connect to the database instance. The sta
Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.
Listener is shown as unavailable.
lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 27-NOV-2012 11:52:40
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=freds-server.i-surname.co.uk)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 27-NOV-2012 11:50:02
Uptime 0 days 0 hr. 2 min. 37 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /opt/oracle/11g/network/admin/listener.ora
Listener Log File /opt/oracle/diag/tnslsnr/freds-server/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=freds-server)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=freds-server)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Services Summary...
Service "GWORCL.i-surname.co.uk" has 2 instance(s).
Instance "GWORCL", status UNKNOWN, has 1 handler(s) for this service...
Instance "GWORCL", status READY, has 1 handler(s) for this service...
Service "GWORCLXDB.i-status.co.uk" has 1 instance(s).
Instance "GWORCL", status READY, has 1 handler(s) for this service...
The command completed successfully
I suspect that this is not just an OEM issue.
see
Listener working but not working for Enterprise manager oracle 11gr2 Linux.
for configuration files
Edited by: Neill_R on Nov 27, 2012 11:51 AMThis was solved by : Osama_mustafa
in the general questions forum
emca -deconfig dbcontrol db -repos drop
emca -config dbcontrol db -repos create -
Dear all,
I have trouble to connect em console to database instance. My database is 11.2.0.3 and before this I did the patching from version 11.2.0.1, and now i cannot get fully functionality of em console.
error is:
Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.
It shows that agent is connected, database and listener is up.
I did recreation, dropping and recreating with emca, but no success.
Did anyone have similar problems with em console?
Regards,You need to first of all, Connect to the Database as SYSDBA (because your were not connected), then start the database (because it is not started).
If you already used the username and password in the command prompt and you are sure that the database is already stared, then you need to set the ORACLE_SID before you open SQLPlus. This is because if SQLPlus does not know the SID you are connecting to, it simply thinks it is not up or has no service hence the message "Connected to an idle instance". -
Enterprise manager is not able to connect to database instance
Hi
I am having a problem with Oracle EM. I would appreciate very much if anyone can help me.
I installed Oracle on XP which runs on virtual pc on XP as well. Everything is fine, I can connect to database with sqlplus, and there were no errors during installation.
But the problem is that, when I try to connect to database with EM, it says:
Enterprise manager is not able to connect to database instance . The state of the components are listed below.
Can anoyone help me?user10637311 wrote:
When you want OEM DB , your existing DB should be created by DBCA or if suppose manually creaed DB then you have to configure that DB to EM by
"emca -config dbcontrol db -repos create". for these two cases istener should be running.
emctl start dbconsole -> to start dbconsole service
emctl status dbconsole-> status of servicesI am sorry, I was looking at $ORACLE_HOME\admin . And in the proper path, both listener.ora and tnsnames.ora do exist.
emca -config dbcontrol db -repos create :
<last part>:
INFO: This operation is being logged at C:\oracle\product\10.2.0\db_1\cfgtoollog
s\emca\orcl\emca_2010-02-18_02-01-40-AM.log.
Feb 18, 2010 2:02:46 AM oracle.sysman.emcp.util.DBControlUtil stopOMS
INFO: Stopping Database Control (this may take a while) ...
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Error creating the repository
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMReposConfig invoke
INFO: Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\or
cl\emca_repos_create_<date>.log for more details.
Feb 18, 2010 2:03:19 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Error creating the repository
Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\orcl\emc
a_2010-02-18_02-01-40-AM.log for more details.
Could not complete the configuration. Refer to the log file at C:\oracle\product
\10.2.0\db_1\cfgtoollogs\emca\orcl\emca_2010-02-18_02-01-40-AM.log for more deta
ils.
C:\oracle\product\10.2.0\db_1\cfgtoollogs\emca\or
cl\emca_repos_create_<date>.log:
Check if repos user already exists.
old 6: WHERE username=UPPER('&EM_REPOS_USER');
new 6: WHERE username=UPPER('SYSMAN');
old 8: IF ( '&EM_CHECK_TYPE' = 'EXISTS') THEN
new 8: IF ( 'NOT_EXISTS' = 'EXISTS') THEN
old 11: raise_application_error(-20000, '&EM_REPOS_USER does not exists..');
new 11: raise_application_error(-20000, 'SYSMAN does not exists..');
old 14: ELSIF ( '&EM_CHECK_TYPE' = 'NOT_EXISTS' ) THEN
new 14: ELSIF ( 'NOT_EXISTS' = 'NOT_EXISTS' ) THEN
old 17: raise_application_error(-20001, '&EM_REPOS_USER already exists..');
new 17: raise_application_error(-20001, 'SYSMAN already exists..');
old 21: raise_application_error(-20002, 'Invalid Check type &EM_CHECK_TYPE');
new 21: raise_application_error(-20002, 'Invalid Check type NOT_EXISTS');
DECLARE
ERROR at line 1:
ORA-20001: SYSMAN already exists..
ORA-06512: at line 17 -
Enterprise Manager is not able to connect to the database instance. Open??
Hello there,
After I installed oracle database and tried to start Enterprise Manager, I got the message:
Enterprise Manager is not able to connect to the database instance.
All statuses are OK (green and up) except database instance. It is also green and up but open. (Details: The instance is open.)
Can anyone help me about it?
I use Windows XP x64 with all patches installed. Oracle database R11g x64.
I tried with different database versions and different machines and different OS and loopback adapter and... my EM still want to log in.
I can log in with sqlplus. It accepts any pass for sys (as sysdba). Why?
My log files are available here: http://195.66.185.187/log.zipYou are using a bequeath connection when logging in with SQL*Plus on the server so the password is not validated.
Log in using SQL*Plus this way:
sqlplus /nolog
followed by
conn sys@<service_name> AS SYSDBA
and provide the correct password
My guess it it will fail.
If so then you need to use the correct password and if you don't know what it is set it when logged on as SYS. -
Livecache database instance is not able to connect from DBMGUI
Hello,
We are facing very critical problem. Livecache database instance is not able to connect from DBMGUI .
DB instace is down currently, i checked X_server is running. when i am trying to conect using DBMGUi its going on hang status, same way if i am trying to start using LC10, its going on hang..
Could anybody please help me out if faced this problem.
Earlier it was working fine. But now It 's not able to connect through DBM tool.
Any help would of great help..
Thanks.
Dinesh
please find xserver*.prt files as attached
Date Time PID Typ MsgID Label Message-Text
2009-06-12 03:10:43 2732 12902 XSERVER started, 'X64/SUN 7.6.04 Build 015-123-189-221'
2009-06-12 03:10:43 2732 12904 XSERVER Service port is 7210
2009-06-12 03:10:43 2732 12922 ENVIRON Command line arguments
2009-06-12 03:10:43 2732 12924 ENVIRON [1] start
2009-06-12 03:10:43 2732 12923 ENVIRON Command line argument dump completed
2009-06-12 03:10:43 2732 12898 ENVIRON Resource limit dump start
2009-06-12 03:10:43 2732 12898 ENVIRON Started by user id 58007 group id 1670
2009-06-12 03:10:43 2732 12898 ENVIRON Current user id 58007 effective id 58007
2009-06-12 03:10:43 2732 12898 ENVIRON Current group id 1670 effective id 1670
2009-06-12 03:10:43 2732 12898 ENVIRON cpu time unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON number of processes 29995
2009-06-12 03:10:43 2732 12898 ENVIRON number of open files 2048
2009-06-12 03:10:43 2732 12898 ENVIRON core size unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON file size unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON heap memory size unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON stack memory size 8192 KBytes
2009-06-12 03:10:43 2732 12898 ENVIRON virtual memory size unlimited
2009-06-12 03:10:43 2732 12898 ENVIRON Resource limit dump completed
2009-06-12 03:10:43 2732 12898 ENVIRON Environment dump start
2009-06-12 03:10:43 2732 12898 ENVIRON PATH=/usr/xpg4/bin:/usr/ccs/bin:/usr/bin
2009-06-12 03:10:43 2732 12898 ENVIRON :/opt/SUNWspro/bin
2009-06-12 03:10:43 2732 12898 ENVIRON IFS=
2009-06-12 03:10:43 0 0
2009-06-12 03:10:43 2732 12898 ENVIRON TZ=NZ
2009-06-12 03:10:43 2732 12898 ENVIRON TMP=/var/tmp
2009-06-12 03:10:43 2732 12898 ENVIRON TMPDIR=/var/tmp
2009-06-12 03:10:43 2732 12898 ENVIRON USER=sdb
2009-06-12 03:10:43 2732 12898 ENVIRON LOGNAME=sdb
2009-06-12 03:10:43 2732 12898 ENVIRON DBROOT=/sapdb/programs
2009-06-12 03:10:43 2732 12898 ENVIRON LD_LIBRARY_PATH=/sapdb/programs/lib
2009-06-12 03:10:43 2732 12898 ENVIRON Environment dump completed
end of startup -
2009-06-12 03:10:44 2732 WNG 12458 XSERVER NISSL Utility init: CDKLoadSAPCryptModule: 51
2009-06-12 07:54:23 2732 ERR 11379 CONNECT Error getting TCP/IP host by address: '10.115.104.42.'
2009-06-12 08:47:00 17388 ERR 11925 XSERVER Send packet, Ref:9 - connection closed (send:EPIPE)
current write position -Hi Ivan,
thanks for the reply, i used the commands suggested by you.
nzlsfn40:ltradm 43% pwd
/sapdb/data/wrk
nzlsfn40:ltradm 44% dbmcli -d LTR -u control,control db_state
OK
State
OFFLINE
nzlsfn40:ltradm 45% dbmcli -d LTR -u control,control db_admin
OK
nzlsfn40:ltradm 46% nzlsfn40:ltradm 46%
nzlsfn40:ltradm 46% dbmcli -d LTR -u control,control db_online
db_online commands is running since long and in knldiag. i am continuously watching logs as below, can you have any idea
Dinesh
logs :-
2009-06-12 10:58:34 137 12929 TASKING Task T114 started
2009-06-12 10:58:34 137 11007 COMMUNIC wait for connection T114
2009-06-12 10:58:34 137 11561 COMMUNIC Connected T114 local 3966
2009-06-12 10:58:34 137 11509 COMMUNIC Connection broken by appl state 10 T114
2009-06-12 10:58:34 137 WNG 11824 COMMUNIC Releasing T114 connection aborted
2009-06-12 10:58:34 137 12827 COMMUNIC wait for connection T114
2009-06-12 10:58:35 11 11561 COMMUNIC Connecting T115 local 3966
2009-06-12 10:58:35 138 12929 TASKING Task T115 started
2009-06-12 10:58:35 138 11007 COMMUNIC wait for connection T115
2009-06-12 10:58:35 138 11561 COMMUNIC Connected T115 local 3966
2009-06-12 10:58:35 138 11509 COMMUNIC Connection broken by appl state 10 T115
2009-06-12 10:58:35 138 WNG 11824 COMMUNIC Releasing T115 connection aborted
2009-06-12 10:58:35 138 12827 COMMUNIC wait for connection T115
2009-06-12 10:58:36 11 11561 COMMUNIC Connecting T116 local 3966
2009-06-12 10:58:36 139 12929 TASKING Task T116 started
2009-06-12 10:58:36 139 11007 COMMUNIC wait for connection T116
2009-06-12 10:58:36 139 11561 COMMUNIC Connected T116 local 3966
2009-06-12 10:58:36 139 11509 COMMUNIC Connection broken by appl state 10 T116
2009-06-12 10:58:36 139 WNG 11824 COMMUNIC Releasing T116 connection aborted
2009-06-12 10:58:36 139 12827 COMMUNIC wait for connection T116
Maybe you are looking for
-
Hi All, Oracle 10.2.0 Windows NT I tried to export a schema from Oracle 10.2.0 to 9.2.0. Both are different servers.so i configured TNS from 9i to 10g and used the 9i export utility. It took more than 30 hours.But the schema size is 7 GB.What is the
-
Hello everyone In my script by using "get digit string" menu i get customers unique number but i want that to be at least 5 character long.For example i do not want him to enter "123" he must enter at least 5 digits.when he enters least then 5 d
-
I recently bought a MacBook Pro and migrated to it from my iMac using my Time Machine backup with Apple's Migration Assistant. However, I notice every time I open Mail, the Mail Upgrade window is displayed. Can anyone enlightened me to way this is? M
-
Hi, Given a string, I want to get the same string EXCEPT the last character. Eg: 'Rahul' My output should be 'Rahu'. XXDAN@CRP1 > select substr('Rahul',1,??) from dual; I know how to do it using 'instr', but, can we do it using just 'substr'? Thank y
-
HP solution center says my offecejet pro L7680 is disconnected
yet I can print from my Pavilion pro L7680, However I cannot scan. Running windows 7 over home wifi which has been working well for a long long time.