Not able to connecct SSH

Question

Hi
I configured Cisco ASA5510 firewall, but i am facing the problem with ssh login, i gave ssh for inside and outside access, but i am getting "server ... error" i enabled LOCAL  for the authentication for ssh and HTTP. and i am able to acees the device through HTTP using ASDM, but not able to access from outside.
please find the configuration
thanks in advance
regards
Javahar
ASA Version 8.2(1)
hostname ASA5510
domain-name default.domain.invalid
enable password Nbxmt7LFbcxtLo.o encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 10.251.38.0 SAP_remote
interface Ethernet0/0
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Ethernet0/1
nameif outside
security-level 0
ip address xxx.xxx.xxx.xxx 255.255.255.252
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
shutdown
no nameif
no security-level
no ip address
ftp mode passive
dns server-group DefaultDNS
domain-name default.domain.invalid
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 SAP_remote 255.255.255.128
access-list outside_cryptomap extended permit ip 192.168.1.0 255.255.255.0 SAP_remote 255.255.255.128
access-list outside_cryptomap_1 extended permit ip 192.168.1.0 255.255.255.0 SAP_remote 255.255.255.128
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
icmp permit any inside
icmp permit any outside
asdm image disk0:/asdm-621.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 115.115.169.241 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map 1 match address outside_cryptomap_1
crypto map outside_map 1 set peer XXX.XXX.XXX.20
crypto map outside_map 1 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map 2 match address outside_cryptomap
crypto map outside_map 2 set pfs group5
crypto map outside_map 2 set peer XXX.XXX.XXX.20
crypto map outside_map 2 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5
crypto map outside_map interface outside
crypto isakmp enable inside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 5
lifetime 28800
http server enable
http 0.0.0.0 0.0.0.0 inside
http 0.0.0.0 0.0.0.0 outsde
ssh 0.0.0.0 0.0.0.0 inside
ssh 0.0.0.0 0.0.0.0 outsde
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username test1234 password /FzQ9W6s1KjC0YQ7 encrypted
username cisco1234 password 5sSb..e9ZNWMmk2e encrypted privilege 15
tunnel-group Remote-p2p-vpn type ipsec-l2l
tunnel-group Remote-p2p-vpn ipsec-attributes
pre-shared-key *
tunnel-group XXX.XXX.XXXX.20 type ipsec-l2l
tunnel-group XXX.XXX.XXXX.20 ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
  message-length maximum 512
message-length maximum client auto
policy-map global_policy
class inspection_default
  inspect dns preset_dns_map
  inspect ftp
  inspect h323 h225
  inspect h323 ras
  inspect netbios
  inspect rsh
  inspect rtsp
  inspect skinny 
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect tftp
  inspect sip 
  inspect xdmcp
service-policy global_policy global
prompt hostname context
Cryptochecksum:83eab0b7ae2d2d9e74f8ea0b005076ea
: end

Answer 1

Hi,
Did you issue the command
ASA(config)# crypto key generate rsa modulus 2048
So that you can use SSH.
EDIT: I would suggest narrowing down the source address from where you can connect to the ASA from "outside" if possible.
- Jouni