Not able to connect i phone andpc
i am not able to sync my iphone and PC , deactivated the anti virus also , pl assist
Take a look at this link, http://www.apple.com/support/iphone/assistant/itunes/
Similar Messages
-
Hi,
I have I Phone 5, I brought this in last year september 2013, its not connected this network, i have done all setting changes, reset all the setting but its not able to connect this networkWarrenty should still cover it
-
My iPhone 3gs is not able to connect through internet. I have a Airtel wireless at home.Phone connects through wireless but not opens any page or itune or applications.
Hi,
can you provide a bit more detail, as can you use the 3G network to access the web, and what security is your wireless using?
Regards
Ryan -
I am having trouble pairing my iPhone4 with bluetooth device. It was connected but is not able to connect after both devices were shut and then switched on, as per Apple instructions. phone does find any bluetooth device closeby. how to fix?
NovaRiddle wrote:
I am having trouble pairing my iPhone4 with bluetooth device. ...
Depends on the device...
Have a look here for Supported Bluetooth Profiles
http://support.apple.com/kb/HT3647 -
Not able to connect to any phone via bluetooth
Hi
I have tried with sevral phones but not able to pair with any phone except apple itself via bluetooth. After verification of passcode, it shows processing for sometime and then message appears "not able to connect" or so!
Please suggest.No. The hardware overrules the software.
If you have something plugging into the headphone jack, that will override the Bluetooth. -
Not able to connect N70 to pc(xp) using ca-53 cabl...
Not able to connect N70 to pc(xp) using ca-53 cable
hi i am having this trouble from a year... i am unable to connect my phone n70 using cable to my pc,.,. even after installing all drivers n pc suite n havin it reinstalled also n again doin d same process.. its not getting detected at all.. please help me out... pleaseeee..been tryin 4m a year..nevr checkd des forumss.. hopin som bdy ll help ,me out.. !!!. !!!!The DKU-2 cable is no longer supported and so cannot be guaranteed to be compatible with current PC Suites, you should be using either your current CA-53 or the CA-70.
Have you had the chance to connect any other phone with the PC using this cable? This would test if thr cable itself might be faulty.
Otherwise remove PC Suite, PC Connectivitiy Solution and Connectivity Cable Drivers from control panel, run the PC Suite Cleaner program that you can get from the PC Suite support pages on the web site, then reinstall everything. -
Not able to connect to wifi wpa2 networks in lenovo vibe x2
Not able to connect to wifi wpa2 networks in lenovo vibe x2. It displayed saved.but not connecting. It connects to open and WEP wifi networks. Please help
Are you trying to connect to a 2.4GHz or a 5GHz network?
What encryption is your router set to use : AES,TKIP/AES,..?
Have you tried to unplug the router from the power source for 2-3 minutes->Plug it back in-> Wait until it establishes an Internet connection-> Try to recreate the phone connection.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Not able to connect N82 to pc in data transfer mod...
I am not able to connect N82 in data transfer mode( other modes are working fine) though i installed latest connectivity cable driver for N82. It says that it could not find any suitable driver(after search cd provided and online).
My current firmware version of N82(RM-313) is 10.0.046. Operating system is Windows Vista. Will the firmware update fix the problem or I have to contact customer care center?
Thank you for your support.
mlhpr
Solved!
Go to Solution.22-Mar-2008 02:51 PM
scoobyman wrote:
Hi mlhpr
If phone is set to 'data transfer" mode on user interface and USB plugged into PC N82 behaves as a Windows USB mass storage device and you are saying that Windows Vista can't recognize this?
Ya thats is what the problem is. As you said the phone was to behave like USB pendrive in data transfer mode but i am getting this error.
:I first connected the N82 with cable Nokia CA-101 provided with handset and selected the data transfer mode. Then the windows(Vista) icon would appear in task bar showing windows is installing the driver. Then a window pops up saying driver not found and requests permission to search online for driver. When I choose search online for suitable driver, it searches for a while and says no driver found. (net is working prefectly fine). The icon disappears from the bar and phone is inaccessible from windows explorer. But USB indicator on mobile screen is active until i disconnect using mobile connectivity settings.
Actually i wanted this mode for installing the Nokia Maps which requires the phone to be in data transfer mode.
mlhpr -
I have iphone 6 plus and not able to connect with my Nokia bluetooth device
not able to connect with bluetooth devices
iPhone only does limited forms of bluetooth connections, such as with speakers.
You cannot transfer files from an iPhone to a Nokia phone using bluetooth.
What type of Nokia device are trying to connect with? Is the Nokia in pairing mode?
What exactly are you attempting to do? -
Not able to connect wifi from personal hotspot
When switch "on" Personal Hotspot on my ipad mini wifi + cellular, I'm not able to connect wifi from my iphone even from other devices. Please advice!!
Reboot your phone. Hold down the sleep/wake button and the home button until the apple logo pops up and if that doesn't work then reset network setting (general>reset) and then another thing is to go to other and add it from there
-
Not able to connect my Iphone to my WRT54GS router with security enabled
As the subject line states, I'm not able to connect my Iphone to my WRT54GS router when the security is enabled. When ever I attempt to connect to my network with my phone it always tells me the password is incorrect. I have double checked the password in the easylink advisor and it matches up. I have also tried both WPA and WEP with the same result, I know that the wireless is working on the router as I turned the security off and was able to connect to it. I updated the firmware this evening also with no changes. If anyone could help me with this issue it would be much appreciated.
First of all, in the router, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also, in the router, set "SSID Broadcast" to "enabled". This will help your iPhone find and lock on to your router's signal.
To connect using WEP, enter WEP "key 1" (found in the router) into the iPhone, not the WEP password or passphrase.
To connect using WPA, make sure that there is not an encryption nomenclature problem. For example, WPA is not the same as WPA with AES. Please note the following:
WPA = PSK = WPA with TKIP = WPA personal
WPA2 = PSK2 = WPA with AES = WPA2 personal
I am not certain, but your iPhone probably does just ordinary WPA (not WPA with AES). Assuming that this is correct, then the router should be set to:
"WPA personal" with "TKIP"
Also, in the iPhone, be sure to delete the entry for your unsecured connection to your router, before you try to input info regarding the secured connection to the router.
Hope this helps.
Message Edited by toomanydonuts on 07-16-2008 03:12 AM -
I have updated my iphone 4s with ios6 and now im not able to connect to itunes store. I can open the apps store but cannot install any app? Anyone facing the same issue..
I have a 4S and upgraded to iOS 6 last week without any issues.
Have you tried resetting your phone (hold the power and home buttons down together until the silver apple appears)? -
Hi,
I am not able to connect my iPhone 4s to my Macbook Air. There is constant audio alert and the iTunes error message says" ITunes could not connect to this phone. The device is no longer connected. I have been connecting with our any problem to my Windows Laptop (Win7) but get this error message on the recently purchased MacBook Air.
Request a solution. Best wishes,
AshokceeLaunch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Why i am not able to connect my apple mobile 4s to apple mobile 5 via bluetooth ?
Dear sir
Pls advise why i am not able to connect my apple mobile 4S to apple mobile 5 via bluetooth.
Or pls advise how i can tranfer music & movies from one apple phone to other.
Regards
PradeepHello shreejith786
The iPhone does not transfer music and videos via Bluetooth. To move content from one iPhone to another, you will need iTunes or iCloud handle that. If you have purchased content from the iTunes Store, you can download them directly. The articles below will assist with getting your media to your other iPhone.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Not able to connect ipad 4 with iphone by bluetooth
Hi All
I got some big problem with my phone 3gs and ipad 4. Ok I bought my ipad 4 two days ago and i did to conncet internet through my iphone 3gs to ipad 4. its was woking perfect everything was great. but yesterday when i disconnect bulethooth with ipad 4 than i am not able to connect again at all. I did reset all settings in both of ipad 4 and iphone 3gs as well but still its didn't work.
If someone know what is the problem can you please help me with this
Thanks
Ron
<Email Edited by Host>Hello Ron,
Congratulations on your new iPad! It sounds like you are trying to use your iPhone 3GS as a Personal Hotspot for your new iPad, but it stopped working when you turned off Bluetooth.
I found an article with steps to troubleshoot issues with connecting to a Personal Hotspot. There are different methods to connect. If you are trying to connect using Bluetooth, Bluetooth will need to be turned on. You can follow the steps listed under the section titled, "Bluetooth troubleshooting" in the following article:
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/ts2756
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.
Maybe you are looking for
-
Design Concern for XI Scenario!
Hi All, Do you have any design solutions for following scenarios with respect to BPM,Adapaters and sync/async flow: 1. JSP - > XI---->DB 2. JSP<--->SAPR/3<->XI<--->DB 3. DB-->XI->JSP 4. JSP<->XI<--->DB Appreciated your time! Will get you reward! Tha
-
Can "Line item dimension" have attributes?
Hi, I understand that, Line item dimension should have only one Characteristic. Is it allowed to have ATTRIBUTES along with it? Thanks for your help. Lakshmi
-
my signature, the creative cloud is valid until December 2015, I had to format my mac as I have programs that already paid (photoshop lightroom and) again?
-
HT1589 Viewing the new iTunes library?
I would like to have the option of viewing my entire library of music with my playlists on the left. Is this not possible anymore with the new itunes? Frustrated... why do they change something that works?!
-
Exit Code: 6 Please see specific errors below for troubleshooting. For example, ERROR: -------------------------------------- Summary -------------------------------------- - 0 fatal error(s), 2 error(s) ----------- Payload: Microsoft Visual C++ 2012