Not able to connect ipad 4 with iphone by bluetooth

Hi All
I got some big problem with my phone 3gs and ipad 4. Ok I bought my ipad 4 two days ago and i did to conncet internet through my iphone 3gs to ipad 4. its was woking perfect everything was great. but yesterday when i disconnect bulethooth with ipad 4 than i am not able to connect again at all. I did reset all settings in both of ipad 4 and iphone 3gs as well but still its didn't work.
If someone know what is the problem can you please help me with this
Thanks
Ron
<Email Edited by Host>

Hello Ron,
Congratulations on your new iPad!  It sounds like you are trying to use your iPhone 3GS as a Personal Hotspot for your new iPad, but it stopped working when you turned off Bluetooth. 
I found an article with steps to troubleshoot issues with connecting to a Personal Hotspot.  There are different methods to connect.  If you are trying to connect using Bluetooth, Bluetooth will need to be turned on.  You can follow the steps listed under the section titled, "Bluetooth troubleshooting" in the following article:
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/ts2756
Thank you for posting in the Apple Support Communities. 
Best,
Sheila M.

Similar Messages

  • Not able to connect to any phone via bluetooth

    Hi
    I have tried with sevral phones but not able to pair with any phone except apple itself via bluetooth. After verification of passcode, it shows processing for sometime and then message appears "not able to connect" or so!
    Please suggest.

    No.  The hardware overrules the software.
    If you have something plugging into the headphone jack, that will override the Bluetooth.

  • Not Able to Connect MW600 with HP Laptop

    Hi All,
    I am having HP 6910p with Vista,,,in this I am not able to pair MW600 ( Stereo Bluetooth Headphone).
    It is asking to locate bluetooth peripheral drivers.
    Can anyone give me the link,,whr shall i find it.

    I don't think that MW600 needs any driver to connect because it just simply pair with the bluetooth of your laptop as it pairs with the mobile phone bluetooth.

  • Not able to connect/login with Oracle Drive

    Conecting via MS FileExplorer works fine (same user, same settings). Has anyone had this problem?

    I finally noticed the pattern. I could not connect non-SSL either and thought it was just me not being able to figure out the correct file path, even though I was using the same path as I used to get to WebDAV with the browser. What I noticed was that when I went to WebDAV with a browser and had to sign into SSO (browser was not already signed-in) it would never re-direct to the folders, I would have to close the browser and open another before seeing the folders. Once logged-in through the browser I could connect using same url/filepath as the browser using ODrive. ODrive will not let me connect unless I have already logged in with the browser. Kinda strange. Still no SSL though. A previous post mentions SSL is not supported, which is wierd considering there is a "Use Secure Connection" check box in the connection configuration........

  • Trying to connect iPad and iPhone via Bluetooth

    Whenever I try to connect my iPad with my iPhone via Bluetooth a window shows up saying "Make sure iPhone is turned on an in range" ,even though I switched off and on Bluetooth many times but it didn't work

    In general this is not a feature of wither iPad or iPhone.
    The excepts are internet tethering, if provided by the carrier, and some apps allow connection from within the app.

  • Not able to connect devices with password

    Can someone help me understand why I can't add devices and computers with my password.  I have always had to save settings and set up to a thumb drive to add a computer.  Now I need to add my iPad and can't use the password.  Can you help me get connected?
    Thank you.

    Are you using WEP or WPA? To check which one, check this procedure.

  • 1.Not able to connect other iPhones through bluetooth

    Hi,
    1. Bluetooth is not working for me in iPhone 5. Not able to connect even other iPhone through my bluetooth.
    2. Wifi not working properly sometimes. Example If i connect my mobile with the wifi network it was connected first, then i disconnect the Wifi modem after that i switch on the modem then connect the wifi it is searching long time.
    3.Camera- I took a snap with Flash mode (ON) in the very dark area.The photo dispays full of white color.

    This is not supported by the bluetooth profile http://support.apple.com/kb/ht3647

  • Not able to connect after changing the password using ALTER VALUES clause

    Hi,
    Just now John explained about VALUES clause in below thread.
    Expired Status
    I created a new account called SURI and tried to use the user account HR's password using VALUES clause. I was able to alter the password but not able to connect SURI with hr password.
    Please see the version details below. And the SQL statements which I have tried.
    SQL*Plus: Release 10.2.0.1.0 - Production on Mon Aug 13 18:44:50 2012
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Enter user-name: sys as sysdba
    Enter password:
    Connected to:
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    SQL> SELECT password
      2  FROM dba_users
      3  WHERE username = 'HR';
    PASSWORD
    4C6D73C3E8B0F0DA
    SQL> ALTER USER SURI IDENTIFIED BY VALUES '4C6D73C3E8B0F0DA';
    User altered.
    SQL> SELECT password
      2  FROM dba_users
      3  WHERE username='SURI';
    PASSWORD
    4C6D73C3E8B0F0DA
    SQL> conn suri/hr     -- HR account's password is hr only
    ERROR:
    ORA-01017: invalid username/password; logon denied
    Warning: You are no longer connected to ORACLE.
    SQL>Thanks,
    Suri

    Suri wrote:
    Hi,
    Just now John explained about VALUES clause in below thread.
    Expired Status
    I created a new account called SURI and tried to use the user account HR's password using VALUES clause. I was able to alter the password but not able to connect SURI with hr password.
    Please see the version details below. And the SQL statements which I have tried.
    SQL*Plus: Release 10.2.0.1.0 - Production on Mon Aug 13 18:44:50 2012
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    Enter user-name: sys as sysdba
    Enter password:
    Connected to:
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    SQL> SELECT password
    2  FROM dba_users
    3  WHERE username = 'HR';
    PASSWORD
    4C6D73C3E8B0F0DA
    SQL> ALTER USER SURI IDENTIFIED BY VALUES '4C6D73C3E8B0F0DA';
    User altered.
    SQL> SELECT password
    2  FROM dba_users
    3  WHERE username='SURI';
    PASSWORD
    4C6D73C3E8B0F0DA
    SQL> conn suri/hr     -- HR account's password is hr only
    ERROR:
    ORA-01017: invalid username/password; logon denied
    Warning: You are no longer connected to ORACLE.
    SQL>Thanks,
    SuriYou can only do it for the same user, as the password is a hashed value that includes the username as part of the hashing (It's either the username or some internal object id or something). So using the hashed value against another user won't work.

  • HT1695 My new iPad with Retina Display is not able to connect to the Wi-Fi of my new Time Capsule. It used to connect, but now it just spins and spins and never connects. I've tried rebooting everything many times.

    My new iPad with Retina Display is not able to connect to the Wi-Fi of my new Time Capsule. It use to connect, but now it just spins and spins and never connects. I've tried rebooting everything many times.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My iphone is not charging or showing in my computer. but its getting charged via wall apple charger.. Not able to connect with itunes.. please help.... :(

    My iphone is not charging or showing in my computer. but its getting charged via wall apple charger.. Not able to connect with itunes.. please help....

    No it doesn't. Sometimes it make a sound that it should when connecting but that is it. Never actually charges or syncs. And it is a brand new cord.

  • I have iphone 6 plus and not able to connect with my Nokia bluetooth device

    not able to connect with bluetooth devices

    iPhone only does limited forms of bluetooth connections, such as with speakers.
    You cannot transfer files from an iPhone to a Nokia phone using bluetooth.
    What type of Nokia device are trying to connect with? Is the Nokia in pairing mode?
    What exactly are you attempting to do?

  • Icloud backup - my ipad is hung with the dialogue box saying "this iPad hasn't been backed up in 4 weeks. Backup happen when this iPad is plugged in locked and connected to WiFi". Even after doing what is said, I am not able to do anything with the iPad -

    My ipad is hung with the dialogue box saying "this iPad hasn't been backed up in 4 weeks. Backup happen when this iPad is plugged in, locked and connected to WiFi". Even after doing that, I am not able to do anything with the iPad - neither able to reboot nor able to get to the homescreen. The dialogue box doesn't go at all even after pressing OK a hundred times. I treid tacking the back up through itunes and through 3G conncetion but of no avail. Please help

    I too have been having this issue since about 12/14.  That is around the same time I got the Ipad for my kids.  I am unsure if it is related.  I have tried logging out of icloud/deleting it and trying again.  Removing most of the apps to sync.  I reset my router.  All of the attempts have produced zero results.  I will be anxiously watching this thread for some help.  Good luck to you also

  • Not able to connect my Iphone to my WRT54GS router with security enabled

    As the subject line states, I'm not able to connect my Iphone to my WRT54GS router when the security is enabled. When ever I attempt to connect to my network with my phone it always tells me the password is incorrect. I have double checked the password in the easylink advisor and it matches up. I have also tried both WPA and WEP with the same result, I know that the wireless is working on the router as I turned the security off and was able to connect to it. I updated the firmware this evening also with no changes. If anyone could help me with this issue it would be much appreciated.

    First of all, in the router, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also, in the router, set "SSID Broadcast" to "enabled". This will help your iPhone find and lock on to your router's signal.
    To connect using WEP, enter WEP "key 1"  (found in the router)  into the iPhone, not the WEP password or passphrase.
    To connect using WPA, make sure that there is not an encryption nomenclature problem.  For example, WPA is not the same as WPA with AES.  Please note the following:
    WPA    =   PSK    =   WPA with TKIP  =  WPA   personal
    WPA2  =   PSK2  =   WPA with AES   =  WPA2 personal
    I am not certain, but your iPhone probably does just ordinary WPA  (not WPA with AES).  Assuming that this is correct, then the router should be set to:
    "WPA personal"  with  "TKIP"
    Also, in the iPhone, be sure to delete the entry for your unsecured connection to your router, before you try to input info regarding the secured connection to the router.
    Hope this helps.
    Message Edited by toomanydonuts on 07-16-2008 03:12 AM

  • Hi, i installed d latest version of itunes on my pc, but still am not able to connect my iPhone with that...

    hi, i installed the latest version of itune on my pc, but still i am not able to connect my iPhone with my pc....

    The top window says Accessing iTunes Store and the animation underneath will
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • I have updated my iphone 4s with ios6 and now im not able to connect to itunes store. I can open the apps store but cannot install any app?  Anyone facing the same issue..

    I have updated my iphone 4s with ios6 and now im not able to connect to itunes store. I can open the apps store but cannot install any app?  Anyone facing the same issue..

    I have a 4S and upgraded to iOS 6 last week without any issues.
    Have you tried resetting your phone (hold the power and home buttons down together until the silver apple appears)?

Maybe you are looking for

  • INF-200017 Unexpected error TERMINATED_WITH_ERROR

    Am having the above error message popping out each time i want to run a report. When i run the report from report builder, i dun face any problem as am able to generate the output. Please provide assistance. At the report server am getting error Term

  • Stock report Question

    I am trying to wright a simple Stock report and i am running into difficulties - any expert advice would be appreciated: The report should have the following fileds: Item Group, Item Code, Item Description, In Stock Quantity, Stock Value. The report

  • How to copy form persoalizations ?

    I have some personalization done on my development instance (AppsDev) on different forms (not OAF pages). I assigned these personalization to my user (named AppsDeveloper) only while I was doing work. Now the problem is, I have 12 forms and there are

  • Total Ink Density too high

    We have a customer who likes to use a dark maroon color over dark background areas, using multiply to enhance the image visually. The problem is that since the transparency setting is 'multiply', The total ink density is around 350 or in some cases 3

  • Unable to create timer - identifier expected? Why?

    Hi all, Given this code excerpt: private Timer mytimer; ActionListener taskPerformer = new ActionListener() { public void actionPerformed(ActionEvent evt) { //...Perform a task... mytimer = new javax.swing.Timer(progress_bar_refresh_delay,taskPerform