Not able to connect pws prime cable provisioning

Dear all.,
   We are not able to connect the provisioning web service of prime cable provisoning . We installed prime cable provisioning all in default.
We can't find the correct port aaddress for example we installed in centos machine IP is 10.2.0.151 port is 9100 . we are using the same IP but not able to connect in visualstudio .

Finally we find out the provisioning web service
this.Url =
http://localhost:9090/ProvisioningPort  This URL is wrong one
http://10.2.0.151:9100/cp-ws-prov/provService?wsdl This one is the correct

Similar Messages

  • Not able to connect with pws prime cable provisioning

    Hi
    I have installed cisco prime cable provisioning in my Linux system. pws is also insatlled. I tried to connect the pws through program. but we are gerring
    Unable to connect to the remote server. I generated the code from the wsdl file and used that c# file to connect.
    During installation of pws the ports used were 9100 for non secure and 9433 for secure. but in the c# file(generated using wsdl) the url is showing as
    this.Url = http://localhost:9090/ProvisioningPort;. I changed the local host to the Linux server name. when i tried to create a session in the webservice programatically  i am getting the above said error.
    the code used to connect the webservice is
    ProvisioningService ps = new ProvisioningService();
    ContextType ct = new ContextType();    
    ct = ps.createSession("admin", "cadebill1", "SER1", 49187, true);
    is it able to view the pws in the internet explorerr. what is the url of the pws?
    please give me a solution
    Regards
    Gnanam

    Finally we find out the provisioning web service
    this.Url =
    http://localhost:9090/ProvisioningPort  This URL is wrong one
    http://10.2.0.151:9100/cp-ws-prov/provService?wsdl This one is the correct

  • Not able to connect N70 to pc(xp) using ca-53 cabl...

    Not able to connect N70 to pc(xp) using ca-53 cable
    hi i am having this trouble from a year... i am unable to connect my phone n70 using cable to my pc,.,. even after installing all drivers n pc suite n havin it reinstalled also n again doin d same process.. its not getting detected at all.. please help me out... pleaseeee..been tryin 4m a year..nevr checkd des forumss.. hopin som bdy ll help ,me out.. !!!. !!!!

    The DKU-2 cable is no longer supported and so cannot be guaranteed to be compatible with current PC Suites, you should be using either your current CA-53 or the CA-70.
    Have you had the chance to connect any other phone with the PC using this cable? This would test if thr cable itself might be faulty.
    Otherwise remove PC Suite, PC Connectivitiy Solution and Connectivity Cable Drivers from control panel, run the PC Suite Cleaner program that you can get from the PC Suite support pages on the web site, then reinstall everything.

  • Help : Not able to connect IdeaPad Tablet K1 to PC with the USB data cable

    Dear All,
    Appreciate very much your help on this.
    I am not able to connect my IdeaPadTablet K1 to PC with the USB data cable.
    Anyone facing the same problem?
    Appreciate your kind advise on the solution.
    thanks in advance,
    LL.

    Hi all,
    Can you try the steps outlined in the following link? It had help resolve the issue for some users.
    http://consumersupport.lenovo.com/au/en/HintsandTips/hints_show_13180405354336.html
    Do feedback.
    thanks!
    lak_sg
    WW Social Media
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Thinkpad- T61 - Not able to connect to Internet either by cable or Wireless

    Hi Friends
    I'm having a T61 Thinkpad and yesterday i had tried system restore, but it has not done any changes,
    But then, I'm not able to connect to Internet either by cable or by Wireless.
    When i pressed Thinkvantage, i could see the Hardware wireless is on "OFF" status and I'm not able to turn it ON
    Can anyboby help me on fixing this issue and enable connect to INTERNET
    Thanks in advance
    Regards
    Sasi

    Hi,
    can you provide a bit more detail, as can you use the 3G network to access the web, and what security is your wireless using?
    Regards
    Ryan

  • Not able to connect N82 to pc in data transfer mod...

    I am not able to connect N82 in data transfer mode( other modes are working fine) though i installed latest connectivity cable driver for N82. It says that it could not find any suitable driver(after search cd provided and online).
    My current firmware version of N82(RM-313) is 10.0.046. Operating system is Windows Vista. Will the firmware update fix the problem or I have to contact customer care center?
    Thank you for your support.
    mlhpr
    Solved!
    Go to Solution.

    22-Mar-2008 02:51 PM
    scoobyman wrote:
    Hi mlhpr
    If phone is set to 'data transfer" mode on user interface and USB plugged into PC N82 behaves as a Windows USB mass storage device and you are saying that Windows Vista can't recognize this?
    Ya thats is what the problem is. As you said the phone was to behave like USB pendrive in data transfer mode but i am getting this error.
    :I first connected the N82 with cable Nokia CA-101 provided with handset and selected the data transfer mode. Then the windows(Vista) icon would appear in task bar showing windows is installing the driver. Then a window pops up saying driver not found and requests permission to search online for driver. When I choose search online for suitable driver, it searches for a while and says no driver found. (net is working prefectly fine). The icon disappears from the bar and phone is inaccessible from windows explorer. But USB indicator on mobile screen is active until i disconnect using mobile connectivity settings.
    Actually i wanted this mode for installing the Nokia Maps which requires the phone to be in data transfer mode.
    mlhpr

  • Satellite L650-11R - not able to connect to public networks

    Hello there.
    Although I am very pleased with my laptop, I have one problem. I am not able to connect to public networks using ethernet cable at some location (not everywhere) Users with different laptops have no problem connecting to the same networks that I cannot, so I'm guessing the problem is my laptop.
    I always get "unidentified network" error. I tried replacing the cable but the problem still remains.
    Any suggestions?

    Hi everybody, I have the same problem which happened with united & for the same product Satellite L650-1HR & also using default Toshiba OS, Windows 7 home premium.
    from my home I can't connect to internet & always get "unidentified network" error also I tried replacing the cable but the problem still remains. only at my home & the same cable working properly with any other Laptop without any problem, outside home internet working properly without any problem.
    I tried all ways, turned off firewall & the DHCP is already enabled, but I'm getting message telling that " the local aria connection does not have a veiled IP configuration"
    So what do you think?

  • Not able to connect any which way

    Greetings,
    I have a Wireless WRT54G V8.  I've been using it for a couple months (password protected), and all of a sudden I am not able to connect.  My 1,2,3,4 and Internet LCDs are all lit up (not flashing), but the Power, DMZ, and WLAN are not.  My cable internet is active, but if I try to connect with a cable running through the router, I get nothing, so I haven't been able to connect to the router at all to make any changes or access the unit.  I've tried resetting the system as directed through the troubleshooting (both holding the reset button and unplugging while holding the reset button).  I've also just tried unplugging the router for a while and still get no response.  One time one of the ports blinked a couple times as well as the power LEDs, but then it went back to where all the Ethernet port LCDs were lit with the Internet LCD.  Last night, I left it unplugged for a half hour, and plugged it back in, and I did have a wireless signal for a couple hours after it sat for a while, but today I was back to having nothing working.  Any help would be appreciated.  I'm baffled since I can't manually reset it, and why would it randomly work last night??
    Thank you in advance!
    Regards,
    Kyle

    Press and hold the reset for 30 seconds.
    Unplug power from router holding the reset button.
    Reconnect the power and release the reset button.
    and upgrade the firmware.

  • AirPort Express Not Able to Connect Wirelessly

    Hardware is iMac 2.4 GHz Intel Core 2 Duo with 4 GB 667 MHz DDR2 SDRAM.  Mac OS 10.6.8
    Connected to Internet via Motorola Surfboard SBG6580 Modem / Router, so I connect by wireless through the modem.
    I followed the installation instructions to install AirPort Express to play music on my home stereo.  I connected the Airport Express to the receiver by the tape port.  I was not able to install AirpPort Express via wireless mode, so I connected the iMac to the AirPort Express by CAT-5 hard wire cord.  The installation was successful and the AirpPort Express obtained an AP address.  I was then able to play music from iTunes pm the iMac through the stereo speakers...as long as the AirPort Express was connected by hard wire to the iMac.
    When I remove the CAT-5 cord from the AirPort Express, the AirPort Express retains the green light, but it is not able to receive data from the iMac.  To the contrary, the AirPort Utility is not able to find any AirPort wireless devices unless the AirPort Express is connected via the hard wire CAT-5 cord.
    As an experiment, I then connected the AirPort Express to the cable modem / router via the hard wire CAT-5 cord.  The AirPort utility on the iMac was still not able to find any AirPort wireless devices.  Further, the model then assigned a different AP address to the iMac so that it was not able to connect to the Internet..
    Meanwhile, the AirPort Express still retains the green light, indicating the installation was a success and that it is ready to transmit.
    Any advice to resolve this issue would be very much appreciated.  Thanks in advance for your thoughts.

    I suggest that you start by performing a "factory default" reset on the 802.11n AirPort Express Base Station (AXn) to get it back to its "out-of-the-box" configuration. By default, the AXn will broadcast an unsecured wireless network with a Network Name of something like: Apple Network NNNNNN
    After the reset has completed, plug the AXn into power, and then, verify from the iMac that this network shows up in the list of networks under the AirPort icon in the OS X menu bar. Does it?
    If so, then from the AirPort icon, switch your iMac to connect to the AXn's wireless network. Note: You will temporarily lose the Internet connection from your Motorola router. Then, run the AirPort Utility. The Utility should now find the AXn. If not, use the Utility's "Configure Other" option under the File menu option in the Utility's menu bar. Enter 10.0.1.1 for the Address and "public" for the Password.
    AirPort Utility > Select the AXn > Manual Setup > AirPort > Wireless
    Wireless Mode: Join a wireless network
    Network Name: <existing Motorola's wireless network>
    Wireless Security: <select the encryption type of the existing wireless network>
    Wireless Password: <enter the existing wireless network password>
    Verify Password: <re-enter the existing wireless network password>
    AirPort Utility > Select the AXn > Manual Setup >Music
    Enable AirPlay (checked)
    iTunes Speaker Name: <enter desired speaker name>
    iTunes Speaker Password: (optional)
    Verify Password: (optional)
    Click Update to write the new settings to the AX

  • Not able to connect to iTune Store through iTunes on my Windows pc(Windows Vista 64 bits)

    I have got a new iPhone 5. I installed iTunes(11.0.1.12) on my home pc (Windwos Vista 64 Bits). However its not able to connect to iTuneStore. It just showing "Accessing iTune Store" nothing happens afterwards. KIndly help me out with this.

    There are several things, any one of which or any combo of which may help. So sometimes you have to fiddle to find what works.
    Give your device a reset. Hold down the sleep and home keys past when you see the red power down slider and until you see the silver apple. Let it reboot and try again.
    Swap out your charger and cable, see if that fixes it or if the issue continues. Try a different USB port.
    Make sure your iTunes is up to date. If you have iOS6+ then you need iTunes 11.
    Uninstall and reinstall iTunes. You can also look in the control panel and add/remove programs, see if there's something like the apple mobile device driver/control and remove that, then plug your device back in. That is what tells your computer what to do with the iPad.

  • Not able to connect wireless

    Dear community,
    I am trying to find some support here after nobody can help me from customer service over the phone. I recently bought a new laptop, an HP Envy. Yesterday I started using it, it connected to my home network with no problem. I have a BT Home Hub 2.0.
    All of a sudden I was not able to connect anymore. The strange thing is that I can connect to other wireless network (such as BT open zone). My girlfriend is connected to our home network with no problems. While receiving input from a BT technician i tried to enable/disable the adapter, reset the Hub ecc. Nothing changed, now I cannot connect to the network wireless, but only with an ethernet cable.
    I was advised to take it back to the vendor, but this is something I would prefer to avoid.
    Any input will be warmly welcome. Thanks
    Riccardo

    There are known problems with hh2 wifi. See keiths help pages http://forumhelp.dyndns.info/hardware/hh2/hh2_issu​es.html
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • 10g Enterprise Manager is not able to connect to the database instance

    I am running a Oracle 10g database in Solaris 10 server. When i am trying to connect to the enterprise manager it says Enterprise Manager is not able to connect to the database instance.
    The database instance is open,the listener is up and the agent connection also says that it succeeded.
    The server houses two 10g databases and the EM was working properly till yesterday. Kindly Help.
    Thanks in advance.
    Ram

    Hi,
    The EM is started and if i give emctl status dbconsole
    -bash-3.00$ emctl status dbconsole
    Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
    Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
    http://gladiator:1158/em/console/aboutApplication
    Oracle Enterprise Manager 10g is running
    Logs are generated in directory /db8/ora10gr2/product/10.2.0/Db_4/gladiator_TROY/sysman/log
    it says that the EM is running. But when i am trying to access the URL it is in IE it says Page cannot be displayed what could be the problem for this???
    Thanks in advance.
    Ram

  • Reporting Services not able to connect with sharepoint

    HI
    We have a Sql server instance where we are not able to install reporting services, so what we have done is we have created one more sql server instance on the same server with reporting services.
    When we configured reporting services in sharepoint integrated mode and try to connect that web service url in sharepoint we are getting an error in sharepoint central administartion  that not able to connect to the reporting services.
    Request you to throw some light on the same.
    Thanks
    Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

    Hi Geeth,
    Based on the limited information, I am not very clearly about you issue. In order to solve the problem more efficiently, I need to clarify some information. Could you post more detail information about “try to connect that web service url in sharepoint we
    are getting an error in sharepoint central administartion”? For example, the detail steps about the action, the screenshot of the action, and what error message you received. I’m not sure which step are you trying to do. And could you tell me the edition of
    your SQL Server and SharePoint? It is benefit for us to do further analysis.
    References:
    2008 R2:
    http://technet.microsoft.com/en-us/library/bb283190(v=sql.105).aspx
    http://sharepointtaskmaster.blogspot.in/2010/11/intergration-reporting-service-with.html
    http://technet.microsoft.com/en-us/library/bb326213(v=sql.105).aspx
    2012:
    http://technet.microsoft.com/en-us/library/47efa72e-1735-4387-8485-f8994fb08c8c
    http://denglishbi.wordpress.com/2011/07/22/configuring-sql-server-denali-reporting-services-sharepoint-2010-integration/
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Not able to connect CRM Online to PowerBI

    Not able to connect CRM Online to PowerBI, Please let me know if you have an idea to resolve this issue.
    oops, something went wrong
    Failed to update model parameters
    Activity Id59a2a854-8e34-6636-0679-3d2e245d2241
    Request Id9b7fa606-324e-4ec8-495f-13f91d03bc54
    Error Code400
    TimeWed Mar 18 2015 21:24:18 GMT-0400 (Eastern Daylight Time)
    Version11.0.9165.945
    Cluster URIhttps://wabi-south-east-asia-redirect.analysis.windows.net

    Hi Kiran
    Please chcek the Note 1359600-MDM stopped communicating after upgrading to 7.1.03 from SAP NOTES.
    https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1359600
    SAP Note Description:
    Summary
    Symptom
    MDM components stopped communicating after upgrading to 7.1.03
    Other terms
    TCP ports, Firewall, connection, network, SP03, SP3, 7.1
    Reason and Prerequisites
    Starting from version 7.1.03 the MDM suite is using different TCP ports for its operations. The change was in order to be compliant with the Internet Authority for Numbering Assignment. Port numbers changed as follows:
    Application Old Port # New Port #
    MDS 20005 59950
    MDLS 20008 59650
    MDIS 20009 59750
    MDSS 20010 59850
    If firewalls were configured to allow MDM's communication throughout the landscape, they actually might prevent (depending on their rules table) the communication after an upgrade to MDM suite starting at version 7.1.03 and higher.
    Solution
    Revise the firewall rules such that they will allow the communication according to the changes described above.
    In order to check that the ports are allowed to pass trough the firewall a telnet test could be done like so:
    1) Open a terminal window (on UNIX) or a command window (on Windows) on the same machine which hosts the application which tries to connect, and issue the following command:
    telnet <MDM server host name or IP address> <TCP port to test>
    2) If no error response is received than it means that the TCP port is allowed to go trough.
    3) Repeat steps 1,2 for all the other ports need by the application.
    Thanks
    Sowseel
    Edited by: sowseel pasumarthi on Jan 18, 2011 6:36 AM

  • Not able to connect to wifi wpa2 networks in lenovo vibe x2

    Not able to connect to wifi wpa2 networks in lenovo vibe x2. It displayed saved.but not connecting. It connects to open and WEP wifi networks. Please help

    Are you trying to connect to a 2.4GHz or a 5GHz network?
    What encryption is your router set to use : AES,TKIP/AES,..?
    Have you tried to unplug the router from the power source for 2-3 minutes->Plug it back in-> Wait until it establishes an Internet connection-> Try to recreate the phone connection.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"! 
    Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Maybe you are looking for

  • Mini DVI to HDMI Cable problems

    So I bought the mini dvi to HDMI adapter off of Amazon so that I could connect my Macbook to my HDTV. I have seen other posts that said that this cable works but when I tried to connect my computer to my TV nothing came up. I tried restarting it and

  • How to fix this error message The backup disk image "/Volumes/AirPort Disk/FARES DEL VALLE's iMac.sparsebundle" could not be accessed (error -1).

    how to fix this error message The backup disk image "/Volumes/AirPort Disk/FARES DEL VALLE's iMac.sparsebundle" could not be accessed (error -1).

  • The new Mac Book Pro and Fire Wire

    Hi, can I use the new MacBook'sPro Fire 800 plug with a 400 connection? Are there any adapters? Otherwise what to do with all my Fire Wire 400 applications? Cheers Hartmut

  • I can't access Google.

    I know lot's of people have asked about this, but they've all had different resolutions. I have tried doing the things they did to no avail. If I try to access google or any of google's pages it eventually times out. If I visit a website that has goo

  • Using Chinese Characters?

    Good afternoon - I would like to use the Chinese characters found on the Mac with Illustrator, but when I type them in they just come up as regular Roman characters. How do I get the program to use the actual Chinese Glyphs? Thanks!